-
Large field generation with Hot Isostatically Pressed Powder-in-Tube MgB2 coil at 25 K
Authors:
A. Serquis,
L. Civale,
J. Y. Coulter,
D. L. Hammon,
X. Z. Liao,
Y. T. Zhu,
D. E. Peterson,
F. M. Mueller,
V. F. Nesterenko,
S. S. Indrakanti
Abstract:
We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The engineering critical current ($J_e$) value is the largest reported in PIT MgB$_2$ wires or tapes. At 25 K our champion 6-layer coil was able to generate a fi…
▽ More
We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The engineering critical current ($J_e$) value is the largest reported in PIT MgB$_2$ wires or tapes. At 25 K our champion 6-layer coil was able to generate a field of 1 T at self-field ($I_c >$ 220 A, $J_e \sim 2.8 \times 10^4$ A/cm$^2$). At 4 K this coil generated 1.6 T under an applied field of 1.25 T ($I_c \sim350$ A, $J_e \sim 4.5 \times 10^4$ A/cm$^2$). These magnetic fields are high enough for a superconducting transformer or magnet applications such as MRI. A SiC doped MgB$_2$ single layer coil shows a promising improvement at high fields and exhibits $J_c > 10^4$ A/cm$^2$ at 7 T.
△ Less
Submitted 23 April, 2004; v1 submitted 2 April, 2004;
originally announced April 2004.
-
The degradation of MgB2 under ambient environment
Authors:
A. Serquis,
Y. T. Zhu,
D. E. Peterson,
F. M. Mueller,
R. K. Schulze,
V. F. Nesterenko,
S. S. Indrakanti
Abstract:
The superconductivities of samples prepared by several procedures were found to degrade under ambient environment. The degradation mechanism was studied by measuring the change of surface chemical composition of dense MgB2 pellets (prepared by hot isostatic pressure, HIPed) under atmospheric exposure using X-ray Photoelectron Spectroscopy (XPS). Results showed that samples with poor connectivity…
▽ More
The superconductivities of samples prepared by several procedures were found to degrade under ambient environment. The degradation mechanism was studied by measuring the change of surface chemical composition of dense MgB2 pellets (prepared by hot isostatic pressure, HIPed) under atmospheric exposure using X-ray Photoelectron Spectroscopy (XPS). Results showed that samples with poor connectivity between grains and with smaller grain sizes degrade with time when exposed to ambient conditions. In these samples, the Tc did not change with time, but the superconducting transition became broader and the Meissner fraction decreased. In contrast, our well-sintered and the HIPed samples remained stable for several months under ambient condition. The degradation was found to be related to surface decomposition as observed by XPS. We observed the formation of oxidized Mg, primarily in the form of a Mg hydroxide, the increase of C and O contents, and the reduction of B concentration in the surface layer of MgB2 samples.
△ Less
Submitted 25 June, 2002;
originally announced June 2002.
-
The influence of microstructures and crystalline defects on the superconductivity of MgB2
Authors:
A. Serquis,
X. Y. Liao,
Y. T. Zhu,
J. Y. Coulter,
J. Y. Huang,
J. O. Willis,
D. E. Peterson,
F. M. Mueller,
N. O. Moreno,
J. D. Thompson,
S. S. Indrakanti,
V. F. Nesterenko
Abstract:
This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have significantly increased critical current density (Jc) at high fields than its un-HIPed counterpart. The HIPed sample had a Jc of 10000 A/cm2 in 50000 Oe (5 T) at 5…
▽ More
This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have significantly increased critical current density (Jc) at high fields than its un-HIPed counterpart. The HIPed sample had a Jc of 10000 A/cm2 in 50000 Oe (5 T) at 5K. This was 20 times higher than that of the un-HIPed sample, and the same as the best Jc reported by other research groups. Microstructures observed in scanning and transmission electron microscopy indicate that the HIP process eliminated porosity present in the MgB2 pellet resulting in an improved intergrain connectivity. Such improvement in intergrain connectivity was believed to prevent the steep Jc drop with magnetic field H that occurred in the un-HIPed MgB2 pellet at H > 45000 Oe (4.5 T) and T = 5 K. The HIP process was also found to disperse the MgO that existed at the grain boundaries of the un-HIPed MgB2 pellet and to generate more dislocations in the HIPed the pellets. These dispersed MgO particles and dislocations improved flux pinning also at H<45000 Oe. The HIPing process was also found to lower the resistivity at room temperature.
△ Less
Submitted 5 March, 2002; v1 submitted 25 January, 2002;
originally announced January 2002.
-
Synthesis, characterization and ageing of MgB2
Authors:
A. Serquis,
R. Schulze,
Y. T. Zhu,
J. Y. Coulter,
D. E. Peterson,
N. O. Moreno,
P. G. Pagliuso,
S. S. Indrakanti,
V. F. Nesterenko,
F. M. Mueller
Abstract:
We studied the influence of sample preparation and defects in the superconducting properties samples using atomic ratios of Mg:B=1:1 and Mg:B=1:2. Samples were characterized by SEM, and XRD, and the magnetization properties were examined in a SQUID magnetometer. The presence of Mg vacancies was determined by Rietveld analysis. Most of the samples exhibited sharp superconducting transitions with…
▽ More
We studied the influence of sample preparation and defects in the superconducting properties samples using atomic ratios of Mg:B=1:1 and Mg:B=1:2. Samples were characterized by SEM, and XRD, and the magnetization properties were examined in a SQUID magnetometer. The presence of Mg vacancies was determined by Rietveld analysis. Most of the samples exhibited sharp superconducting transitions with Tcs between 37- 39 K. We found a strong correlation between the crystal strain and the Tc. This strain was related to the presence of Mg vacancies. In addition, results showed that some samples degraded with time when exposed to ambient conditions. In these samples the Tc did not change with time, but the superconducting transition became broader and the Meissner fraction decreased. This effect was only present in samples with poor connectivity between grains and smaller grain sizes. The degradation was related to a surface decomposition as observed by X-ray Photoelectron Spectroscopy. No correlation was found between this effect and the presence of Mg vacancies.
△ Less
Submitted 13 December, 2001;
originally announced December 2001.
-
Improved superconducting properties of MgB2
Authors:
N. A. Frederick,
Shi Li,
M. B. Maple,
V. F. Nesterenko,
S. S. Indrakanti
Abstract:
We present electrical transport, magnetization, and specific heat measurements on bulk MgB2 samples (T_{c} = 38.5 K) synthesized under 200 MPa pressure using a process based on hot isostatic pressing with cooling under pressure. The samples are fully dense and display excellent superconducting properties, including a narrow superconducting transition width (ΔT_{c} = 0.75 K), a high upper critica…
▽ More
We present electrical transport, magnetization, and specific heat measurements on bulk MgB2 samples (T_{c} = 38.5 K) synthesized under 200 MPa pressure using a process based on hot isostatic pressing with cooling under pressure. The samples are fully dense and display excellent superconducting properties, including a narrow superconducting transition width (ΔT_{c} = 0.75 K), a high upper critical field H_{c2} (H_{c2}(0) ~ 155 kOe), and a critical current density J_{c} that is the largest yet measured for bulk samples of MgB2 (J_{c}(0) ~ 1.4 MA/cm^{2}). Specific heat measurements yielded a jump ΔC at T_{c} of 92 mJ/mol K. These superconducting properties are comparable to those obtained with techniques that are not so well suited to industrial scale fabrication.
△ Less
Submitted 25 June, 2001;
originally announced June 2001.
-
Hot isostatic pressing of bulk magnesium diboride: mechanical and superconducting properties
Authors:
S. S. Indrakanti,
V. F. Nesterenko,
M. B. Maple,
N. A. Frederick,
W. M. Yuhasz,
Shi Li
Abstract:
Two different hot isostatic pressing cycles (HIPing) were investigated to synthesize bulk MgB2 samples: a "standard" cycle where a low vessel pressure is maintained while heating to the process temperature with a subsequent simultaneous pressure and temperature decrease and a new method - dense material cooling under pressure (DMCUP). The latter method allowed the synthesis of dense samples with…
▽ More
Two different hot isostatic pressing cycles (HIPing) were investigated to synthesize bulk MgB2 samples: a "standard" cycle where a low vessel pressure is maintained while heating to the process temperature with a subsequent simultaneous pressure and temperature decrease and a new method - dense material cooling under pressure (DMCUP). The latter method allowed the synthesis of dense samples with diameters up to 20 mm and thicknesses up to 10 mm from commercial MgB2 powder. Optimal conditions for the DMCUP method with glass encapsulation (maximum pressure 200 MPa, maximum temperature 1000 C over 200 min, and cooling under pressure) resulted in a dense material with a sharp superconducting transition at 38.5 K. This method employs a pressure which is one order of magnitude less than previously reported for pressure assisted sintering of dense material and can be scaled to larger sample sizes and complex shapes. The data for density, microhardness, fracture toughness and sound speed as well as superconducting properties for bulk magnesium diboride are presented. Ball milling the powder enhances sintering and results in a more homogeneous final microstructure.
△ Less
Submitted 8 August, 2001; v1 submitted 24 May, 2001;
originally announced May 2001.
