-
Controlling Competing Feedback Mechanisms for Programmable Patterns via Nonlinear Laser Lithography
Authors:
Özgün Yavuz,
Abdullah bin Aamir,
Ihor Pavlov,
Sezin Galioğlu,
Ü. Seleme Nizam Bayrak,
Petro Deminskyi,
Onur Tokel,
Serim Ilday,
F. Ömer Ilday
Abstract:
Controlling laser-induced pattern formation remains a long-standing challenge. A key advance was recognising the pivotal role of intrinsic feedback mechanisms in self-organisation, which enabled self-similar patterns with long-range order through nonlinear laser lithography. This concept was recently leveraged to surpass the diffraction limit. However, the demonstrated structures are relatively si…
▽ More
Controlling laser-induced pattern formation remains a long-standing challenge. A key advance was recognising the pivotal role of intrinsic feedback mechanisms in self-organisation, which enabled self-similar patterns with long-range order through nonlinear laser lithography. This concept was recently leveraged to surpass the diffraction limit. However, the demonstrated structures are relatively simple and material-specific, as they rely on a single assumed formation mechanism for each material. Here, we reveal the previously unknown coexistence of competing feedback mechanisms that drive distinct chemical and ablative processes, resulting in patterns with different symmetries. We show that one mechanism can be selectively activated, while completely suppressing the other, by tuning the laser parameters independently of the material. The competing mechanisms break surface symmetries in distinct lateral and vertical directions, and the selection can be dynamically inverted in situ, leading to rich surface chemistries and morphologies. We demonstrate the potential for applications through the maskless and ambient-air fabrication of complex composite patterns on diverse materials and substrates. These include seamlessly stitched superhydrophilic and superhydrophobic domains, structural colour, and a holographic temperature sensor. Combining programmable mechanism selection with recent demonstrations of sub-10 nm features could enable the maskless fabrication of composite structures that rival the capabilities of top-down nanofabrication techniques.
△ Less
Submitted 30 March, 2025;
originally announced March 2025.
-
Ultrafast laser synthesis of zeolites
Authors:
Sezin Galioglu,
Mehdi Hagverdiyev,
Meryem M. Doğan,
Özgün Yavuz,
Ü. Seleme Nizam,
Ghaith Makey,
Aladin Choura,
Mesut Laçin,
Burcu Akata Kurç,
Parviz Elahi,
F. Ömer Ilday,
Serim Ilday
Abstract:
Research has demonstrated that zeolite nucleation and growth can be controlled by fine-tuning chemical composition, temperature, and pressure, resulting in structures with diverse porosities and functionalities. Nevertheless, current energy delivery methods lack the finesse required to operate on the femto- and picosecond timescales of silica polymerisation and depolymerisation, limiting their abi…
▽ More
Research has demonstrated that zeolite nucleation and growth can be controlled by fine-tuning chemical composition, temperature, and pressure, resulting in structures with diverse porosities and functionalities. Nevertheless, current energy delivery methods lack the finesse required to operate on the femto- and picosecond timescales of silica polymerisation and depolymerisation, limiting their ability to direct synthesis with high precision. To overcome this limitation, we introduce an ultrafast laser synthesis technique capable of delivering energy at these timescales with unprecedented spatiotemporal precision. Unlike conventional or emerging approaches, this method bypasses the need for specific temperature and pressure settings, as nucleation and growth are governed by dynamic phenomena arising from nonlinear light-matter interactions, such as convective flows, cavitation bubbles, plasma formation, and shock waves. These processes can be initiated, paused, and resumed within fractions of a second, effectively freezing structures at any stage of self-assembly. Using this approach, we traced the entire nucleation and growth pathway of laser-synthesized TPA-silicate-1 zeolites, from early oligomer formation to fully developed crystals. The unprecedented spatiotemporal control of this technique unlocks new avenues for manipulating reaction pathways and exploring the vast configurational space of zeolites.
△ Less
Submitted 26 February, 2025; v1 submitted 4 February, 2025;
originally announced February 2025.
-
Development of a Selective Wet-Chemical Etchant for 3D Structuring of Silicon via Nonlinear Laser Lithography
Authors:
Mona Zolfaghari Borra,
Behrad Radfar,
Hisham Nasser,
Tahir Çolakoğlu,
Onur Tokel,
Ahmet Turnalı,
Merve Demirtaş,
Hande Ustunel,
Daniele Toffoli,
F. Ömer İlday,
Raşit Turan,
Ihor Pavlov,
Alpan Bek
Abstract:
Recently-demonstrated high-quality three-dimensional (3D) subsurface laser processing inside crystalline silicon (c-Si) wafers opens a door to a wide range of novel applications in multidisciplinary research areas. Using this technique, a novel maskless micro-pillars with precise control on the surface reflection and coverage are successfully fabricated by etching the laser processed region of c-S…
▽ More
Recently-demonstrated high-quality three-dimensional (3D) subsurface laser processing inside crystalline silicon (c-Si) wafers opens a door to a wide range of novel applications in multidisciplinary research areas. Using this technique, a novel maskless micro-pillars with precise control on the surface reflection and coverage are successfully fabricated by etching the laser processed region of c-Si wafer. To achieve this, a particular selective wet chemical etching is developed to follow subsurface laser processing of c-Si to reveal the desired 3D structures with smooth surfaces. Here, we report the development of a novel chromium-free chemical etching recipe based on copper nitrate, which yields substantially smooth surfaces at high etch rate and selectivity on the both laser-processed Si surface and subsurface, i.e., without significant etching of the unmodified Si. Our results show that the etch rate and surface morphology are interrelated and strongly influenced by the composition of the adopted etching solution. After an extensive compositional study performed at room temperature, we identify an etchant with a selectivity of over 1600 times for laser-modified Si with respect to unmodified Si. We also support our findings using density functional theory calculations of HF and Cu adsorption energies, indicating significant diversity on the c-Si and laser-modified surfaces.
△ Less
Submitted 14 August, 2023;
originally announced September 2023.
-
Nonlinear laser lithography as a new technology for the high-quality alignment of nematic liquid crystals
Authors:
Ihor Pavlov,
Andrey Rybak,
Andrii Dobrovolskiy,
Volodymyr Kadan,
Ivan Blonskiy,
Fatih O Ilday,
Zoya Kazantseva,
Igor Gvozdovskyy
Abstract:
It is well known that today two main and well studied methods for alignment of liquid crystals has been used, namely: rubbing and photoalignment technologies, that lead to the change of anisotropic properties of aligning layers and long-range interaction of the liquid crystal molecules in a mesophase. In this manuscript, we propose the usage of the nonlinear laser lithography technique, which was…
▽ More
It is well known that today two main and well studied methods for alignment of liquid crystals has been used, namely: rubbing and photoalignment technologies, that lead to the change of anisotropic properties of aligning layers and long-range interaction of the liquid crystal molecules in a mesophase. In this manuscript, we propose the usage of the nonlinear laser lithography technique, which was recently presented as a fast, relatively low-cost method for a large area micro- and nanogrooves fabrication based on laser-induced periodic surface structuring, as a new perspective method of the alignment of nematic liquid crystals. 920 nm periodic grooves were formed on a Ti layer processed by means of the nonlinear laser lithography and studied as an aligning layer. Aligning properties of the periodic structures of Ti layers were examined by using a combined twist LC cell. In addition, the layer of the microstructured Ti was coated with an oxidianiline-polyimide film with annealing of the polymer film followed without any further processing. The dependence of the twist angle of LC cells on a scanning speed and power of laser beam during processing of the Ti layer was studied. The azimuthal anchoring energy of Ti layers with a periodic microstructure was calculated. The maximum azimuthal anchoring energy for the microstructured Ti layer was about 4.6*10-6 J/m2, which is comparable to the photoalignment technology. It was found that after the deposition of a polyimide film on the periodic microstructured Ti layer, the gain effect of the azimuthal anchoring energy to ~ 1*10-4 J/m2 is observed. Also, AFM study of aligning surfaces was carried out.
△ Less
Submitted 9 November, 2017; v1 submitted 7 November, 2017;
originally announced November 2017.
-
The alignment of nematic liquid crystal by the Ti layer processed by nonlinear laser lithography
Authors:
I. Pavlov,
A. Rybak,
A. Dobrovolskiy,
V. Kadan,
I. Blonskiy,
F. Ö. Ilday,
Z. Kazantseva,
I. Gvozdovskyy
Abstract:
It is well known that the alignment of liquid crystals can be realized by rubbing or photoalignment technologies. Recently nonlinear laser lithography was introduced as a fast, relatively low-cost method for large area nano-grating fabrication based on laser-induced periodic surface structuring. In this letter for the first time the usage of the nonlinear laser lithography as a perspective method…
▽ More
It is well known that the alignment of liquid crystals can be realized by rubbing or photoalignment technologies. Recently nonlinear laser lithography was introduced as a fast, relatively low-cost method for large area nano-grating fabrication based on laser-induced periodic surface structuring. In this letter for the first time the usage of the nonlinear laser lithography as a perspective method of the alignment of nematics was presented. By nonlinear laser lithography, microgrooves with about 1 μm period were formed on Ti layer. The microstructured Ti layer was coated with oxidianiline-polyimide film with annealing of the polymer followed without any further processing. Aligning properties of microstructured Ti layers were examined with combined twist LC cell. The dependencies of the twist angle of LC cells and azimuthal anchoring energy of layers on scanning speed and power of laser beam during processing of the Ti layer were the focus of our studies as well. The maximum azimuthal anchoring energy, obtained for pure microstructured Ti layer, is comparable with photoalignment technology. It was found that the deposition of polyimide film on microstructured Ti layer leads to the gain effect of the azimuthal anchoring energy. Also, AFM study of aligning surfaces was carried out.
△ Less
Submitted 31 December, 2017; v1 submitted 12 July, 2017;
originally announced July 2017.
-
Si nano-VINe: Electrical Percolation in Quantum-Confined nc-Si:SiO2 Systems
Authors:
Serim Ilday,
Hande Ustunel,
F. Ömer Ilday,
Daniele Toffoli,
Gizem Nogay,
David Friedrich,
René Hübner,
Bernd Schmidt,
Karl-Heinz Heinig,
Rasit Turan
Abstract:
Nanostructures, especially of silicon, are of paramount importance for new generation solar cell applications. The key material requirements for solar cells are good electrical conductivity, confinement of excitons, and a tunable band-gap that allows for tandem arrangements to absorb a maximally large portion of the solar spectrum. However, to date, existing Si-based nanostructures have addressed…
▽ More
Nanostructures, especially of silicon, are of paramount importance for new generation solar cell applications. The key material requirements for solar cells are good electrical conductivity, confinement of excitons, and a tunable band-gap that allows for tandem arrangements to absorb a maximally large portion of the solar spectrum. However, to date, existing Si-based nanostructures have addressed these requirements individually. The difficulty is that these requirements are entangled in complex ways, so an effort to improve one can lead to a major trade-offs in the others. In this study, we report on a novel silicon nanostructure, where the key advance is that we have managed to satisfy all the abovementioned requirements simultaneously: We demonstrate that the excitons are confined, the bandgap is tunable, and the electrons can freely travel along the nc-Si network.
△ Less
Submitted 17 September, 2013;
originally announced September 2013.
-
Ansatz from Non-Linear Optics Applied to Trapped Bose-Einstein Condensates
Authors:
Murat Keceli,
F. O. Ilday,
M. O. Oktel
Abstract:
A simple analytical ansatz, which has been used to describe the intensity profile of the similariton laser (a laser with self-similar propagation of ultrashort pulses), is used as a variational wave function to solve the Gross-Pitaevskii equation for a wide range of interaction parameters. The variational form interpolates between the noninteracting density profile and the strongly interacting T…
▽ More
A simple analytical ansatz, which has been used to describe the intensity profile of the similariton laser (a laser with self-similar propagation of ultrashort pulses), is used as a variational wave function to solve the Gross-Pitaevskii equation for a wide range of interaction parameters. The variational form interpolates between the noninteracting density profile and the strongly interacting Thomas-Fermi profile smoothly. The simple form of the ansatz is modified for both cylindrically symmetric and completely anisotropic harmonic traps. The resulting ground-state density profile and energy are in very good agreement with both the analytical solutions in the limiting cases of interaction and the numerical solutions in the intermediate regime.
△ Less
Submitted 29 March, 2007;
originally announced March 2007.
