-
Structural and Magnetic Properties of Co-rich bct CoMn Films
Authors:
S. F. Peterson,
Y. U. Idzerda
Abstract:
Thin-films of bct Co$_{1-x}$Mn$_x$ grown by molecular beam epitaxy on MgO(001) were measured to have an enhanced atomic magnetic moment of $2.52 \pm 0.07$ $μ_\text{B}/\text{atom}$ beyond the pinnacle of the Slater-Pauling curve for Fe$_{1-x}$Co$_{x}$ with a moment of $2.42$ $μ_\text{B}/\text{atom}$. The compositional variation of the average total moment for thin-film bct Co$_{1-x}$Mn$_x$ alloys i…
▽ More
Thin-films of bct Co$_{1-x}$Mn$_x$ grown by molecular beam epitaxy on MgO(001) were measured to have an enhanced atomic magnetic moment of $2.52 \pm 0.07$ $μ_\text{B}/\text{atom}$ beyond the pinnacle of the Slater-Pauling curve for Fe$_{1-x}$Co$_{x}$ with a moment of $2.42$ $μ_\text{B}/\text{atom}$. The compositional variation of the average total moment for thin-film bct Co$_{1-x}$Mn$_x$ alloys is in stark contrast to the historical measurements of bulk fcc Co$_{1-x}$Mn$_x$. These GGA calculations reveal that significant improvements of this ferromagnetic forced bct phase on MgO(001) are possible via substrate selection. For example, bct Co$_{1-x}$Mn$_x$ films on MgO(001) are calculated to have lower atomic moments than those on substrates with smaller lattice constants such as GaAs(001), BaTiO$_3$(110), and SrTiO$_3$(110) which is predicted to increase the average atomic moment up to $2.61$ $μ_\text{B}/\text{atom}$ and lead to increased structural stability and therefore thicker film growths.
△ Less
Submitted 2 April, 2025; v1 submitted 3 December, 2024;
originally announced December 2024.
-
Spin orbit precession damping in transition metal ferromagnets
Authors:
Keith Gilmore,
Yves U. Idzerda,
Mark D. Stiles
Abstract:
We provide a simple explanation, based on an effective field, for the precession damping rate due to the spin-orbit interaction. Previous effective field treatments of spin-orbit damping include only variations of the state energies with respect to the magnetization direction, an effect referred to as the breathing Fermi surface. Treating the interaction of the rotating spins with the orbits as…
▽ More
We provide a simple explanation, based on an effective field, for the precession damping rate due to the spin-orbit interaction. Previous effective field treatments of spin-orbit damping include only variations of the state energies with respect to the magnetization direction, an effect referred to as the breathing Fermi surface. Treating the interaction of the rotating spins with the orbits as a perturbation, we include also changes in the state populations in the effective field. In order to investigate the quantitative differences between the damping rates of iron, cobalt, and nickel, we compute the dependence of the damping rate on the density of states and the spin-orbit parameter. There is a strong correlation between the density of states and the damping rate. The intraband terms of the damping rate depend on the spin-orbit parameter cubed while the interband terms are proportional to the spin-orbit parameter squared. However, the spectrum of band gaps is also an important quantity and does not appear to depend in a simple way on material parameters.
△ Less
Submitted 3 January, 2008;
originally announced January 2008.
-
Identification of the dominant precession damping mechanism in Fe, Co, and Ni by first-principles calculations
Authors:
K. Gilmore,
Y. U. Idzerda,
M. D. Stiles
Abstract:
The Landau-Lifshitz equation reliably describes magnetization dynamics using a phenomenological treatment of damping. This paper presents first-principles calculations of the damping parameters for Fe, Co, and Ni that quantitatively agree with existing ferromagnetic resonance measurements. This agreement establishes the dominant damping mechanism for these systems and takes a significant step to…
▽ More
The Landau-Lifshitz equation reliably describes magnetization dynamics using a phenomenological treatment of damping. This paper presents first-principles calculations of the damping parameters for Fe, Co, and Ni that quantitatively agree with existing ferromagnetic resonance measurements. This agreement establishes the dominant damping mechanism for these systems and takes a significant step toward predicting and tailoring the damping constants of new materials.
△ Less
Submitted 14 May, 2007;
originally announced May 2007.
-
Percolative Ferromagnetism in Anatase Co:TiO2
Authors:
S. R. Shinde,
S. B. Ogale,
Abhijit S. Ogale,
S. J. Welz,
A. Lussier,
Darshan C. Kundaliya,
H. Zheng,
S. Dhar,
M. S. R. Rao,
R. Ramesh,
Y. U. Idzerda,
N. D. Browning,
T. Venkatesan
Abstract:
We revisit the most widely investigated and controversial oxide diluted magnetic semiconductor (DMS), Co:TiO2, with a new high temperature film growth, and show that the corresponding material is not only an intrinsic DMS ferromagnet, but also supports a percolative mechanism of ferromagnetism. We establish the uniformity of dopant distribution across the film cross section by Z-contrast imaging…
▽ More
We revisit the most widely investigated and controversial oxide diluted magnetic semiconductor (DMS), Co:TiO2, with a new high temperature film growth, and show that the corresponding material is not only an intrinsic DMS ferromagnet, but also supports a percolative mechanism of ferromagnetism. We establish the uniformity of dopant distribution across the film cross section by Z-contrast imaging via scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) at spatial resolution of 0.4 nm and the oxidized 2+ valence state of cobalt by x-ray absorption spectroscopy (XAS). The dependence of magnetic properties on cobalt concentration is consistent with the defect polaron percolation model. The peculiar increase in the transport activation energy above a specific cobalt concentration further emphasizes the polaron contribution to magnetic order.
△ Less
Submitted 10 May, 2005;
originally announced May 2005.
-
Electronic structure of single-crystalline Mg(x)Al(1-x)B(2)
Authors:
S. Schuppler,
E. Pellegrin,
N. Nuecker,
T. Mizokawa,
M. Merz,
D. A. Arena,
J. Dvorak,
Y. U. Idzerda,
D. -J. Huang,
C. -F. Cheng,
K. -P. Bohnen,
R. Heid,
P. Schweiss,
Th. Wolf
Abstract:
Polarization-dependent x-ray absorption spectroscopy at the B 1s edge of single-crystalline Mg(x)Al(1-x)B(2) reveals a strongly anisotropic electronic structure near the Fermi energy. Comparing spectra for superconducting compounds (x=0.9, 1.0) with those for the non-superconductor x=0.0 gives direct evidence on the importance of an in-plane spectral feature crossing E_F for the superconducting…
▽ More
Polarization-dependent x-ray absorption spectroscopy at the B 1s edge of single-crystalline Mg(x)Al(1-x)B(2) reveals a strongly anisotropic electronic structure near the Fermi energy. Comparing spectra for superconducting compounds (x=0.9, 1.0) with those for the non-superconductor x=0.0 gives direct evidence on the importance of an in-plane spectral feature crossing E_F for the superconducting properties of the diborides. Good agreement is found with the projected B 2p density of states from LDA band structure calculations.
△ Less
Submitted 10 May, 2002;
originally announced May 2002.
-
Hole distribution for (Sr,Ca,Y,La)_14 Cu_24 O_41 ladder compounds studied by x-ray absorption spectroscopy
Authors:
N. Nücker,
M. Merz,
C. A. Kuntscher,
S. Gerhold,
S. Schuppler,
R. Neudert,
M. S. Golden,
J. Fink,
D. Schild,
S. Stadler,
V. Chakarian,
J. Freeland,
Y. U. Idzerda,
K. Conder,
M. Uehara,
T. Nagata,
J. Goto,
J. Akimitsu,
N. Motoyama,
H. Eisaki,
S. Uchida,
U. Ammerahl,
A. Revcolevschi
Abstract:
The unoccupied electronic structure for the Sr_14Cu_24O_41 family of two-leg ladder compounds was investigated for different partial substitutions of Sr^2+ by Ca^2+, leaving the nominal hole count constant, and by Y^3+ or La^3+, reducing the nominal hole count from its full value of 6 per formula unit. Using polarization-dependent x-ray absorption spectroscopy on single crystals, hole states on…
▽ More
The unoccupied electronic structure for the Sr_14Cu_24O_41 family of two-leg ladder compounds was investigated for different partial substitutions of Sr^2+ by Ca^2+, leaving the nominal hole count constant, and by Y^3+ or La^3+, reducing the nominal hole count from its full value of 6 per formula unit. Using polarization-dependent x-ray absorption spectroscopy on single crystals, hole states on both the chain and ladder sites could be studied. While for intermediate hole counts all holes reside on O sites of the chains, a partial hole occupation on the ladder sites in orbitals oriented along the legs is observed for the fully doped compound Sr_14Cu_24O_41. On substitution of Ca for Sr orbitals within the ladder planes but perpendicular to the legs receive some hole occupation as well.
△ Less
Submitted 22 August, 2000;
originally announced August 2000.
