Showing 1–50 of 57 results for author: Hsu, W

Choosing a Suitable Acquisition Function for Batch Bayesian Optimization: Comparison of Serial and Monte Carlo Approaches

Authors: Imon Mia, Mark Lee, Weijie Xu, William Vandenberghe, Julia W. P. Hsu

Abstract: Batch Bayesian optimization is widely used for optimizing expensive experimental processes when several samples can be tested together to save time or cost. A central decision in designing a Bayesian optimization campaign to guide experiments is the choice of a batch acquisition function when little or nothing is known about the landscape of the "black box" function to be optimized. To inform this… ▽ More Batch Bayesian optimization is widely used for optimizing expensive experimental processes when several samples can be tested together to save time or cost. A central decision in designing a Bayesian optimization campaign to guide experiments is the choice of a batch acquisition function when little or nothing is known about the landscape of the "black box" function to be optimized. To inform this decision, we first compare the performance of serial and Monte Carlo batch acquisition functions on two mathematical functions that serve as proxies for typical materials synthesis and processing experiments. The two functions, both in six dimensions, are the Ackley function, which epitomizes a "needle-in-haystack" search, and the Hartmann function, which exemplifies a "false optimum" problem. Our study evaluates the serial upper confidence bound with local penalization (UCB/LP) batch acquisition policy against Monte Carlo-based parallel approaches: q-log expected improvement (qlogEI) and q-upper confidence bound (qUCB), where q is the batch size. Tests on Ackley and Hartmann show that UCB/LP and qUCB perform well in noiseless conditions, both outperforming qlogEI. For the Hartmann function with noise, all Monte Carlo functions achieve faster convergence with less sensitivity to initial conditions compared to UCB/LP. We then confirm the findings on an empirical regression model built from experimental data in maximizing power conversion efficiency of flexible perovskite solar cells. Our results suggest that when empirically optimizing a "black-box" function in less than or equal to six dimensions with no prior knowledge of the landscape or noise characteristics, qUCB is best suited as the default to maximize confidence in the modeled optimum while minimizing the number of expensive samples needed. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Multi-Variable Batch Bayesian Optimization in Materials Research: Synthetic Data Analysis of Noise Sensitivity and Problem Landscape Effects

Authors: Imon Mia, Armi Tiihonen, Anna Ernst, Anusha Srivastava, Tonio Buonassisi, William Vandenberghe, Julia W. P. Hsu

Abstract: Bayesian Optimization (BO) machine learning method is increasingly used to guide experimental optimization tasks in materials science. To emulate the large number of input variables and noise-containing results in experimental materials research, we perform batch BO simulation of six design variables with a range of noise levels. Two test cases relevant for materials science problems are examined:… ▽ More Bayesian Optimization (BO) machine learning method is increasingly used to guide experimental optimization tasks in materials science. To emulate the large number of input variables and noise-containing results in experimental materials research, we perform batch BO simulation of six design variables with a range of noise levels. Two test cases relevant for materials science problems are examined: a needle-in-a-haystack case (Ackley function) that may be encountered in, e.g., molecule optimizations, and a smooth landscape with a local optimum in addition to the global optimum (Hartmann function) that may be encountered in, e.g., material composition optimization. We show learning curves, performance metrics, and visualization to effectively track the optimization progression and evaluate how the optimization outcomes are affected by noise, batch-picking method, choice of acquisition function, and exploration hyperparameter values. We find that the effects of noise depend on the problem landscape: noise degrades the optimization results of a needle-in-a-haystack search (Ackley) dramatically more. However, with increasing noise, we observe an increasing probability of landing on the local optimum in Hartmann. Therefore, prior knowledge of the problem domain structure and noise level is essential when designing BO for materials research experiments. Synthetic data studies -- with known ground truth and controlled noise levels -- enable us to isolate and evaluate the impact of different batch BO components, {\it e.g.}, acquisition policy, objective metrics, and hyperparameter values, before transitioning to the inherent uncertainties of real experimental systems. The results and methodology of this study will facilitate a greater utilization of BO in guiding experimental materials research, specifically in settings with a large number of design variables to optimize. △ Less

Submitted 11 June, 2025; v1 submitted 4 April, 2025; originally announced April 2025.

Robust Anisotropic Spin Hall Effect in Rutile RuO2

Authors: Yu-Chun Wang, Zhe-Yu Shen, Chia-Hsi Lin, Wei-Chih Hsu, Yi-Ying Chin, Akhilesh Kr. Singh, Wei-Li Lee, Ssu-Yen Huang, Danru Qu

Abstract: Altermagnets, which exhibit the advantages of both antiferromagnets and ferromagnets, have attracted significant attention recently. Among them, ruthenium dioxide (RuO2), a prototypical altermagnet candidate, is under intensive debate on its magnetic order and altermagnetic characters. In this work, we provide a comprehensive study of the spin-to-charge conversion in epitaxial RuO2 thin films with… ▽ More Altermagnets, which exhibit the advantages of both antiferromagnets and ferromagnets, have attracted significant attention recently. Among them, ruthenium dioxide (RuO2), a prototypical altermagnet candidate, is under intensive debate on its magnetic order and altermagnetic characters. In this work, we provide a comprehensive study of the spin-to-charge conversion in epitaxial RuO2 thin films with various orientations and fabrication methods. By utilizing thermal spin injections from a ferrimagnetic insulator, we unambiguously reveal a negative spin Hall angle for RuO2, which is opposite to all the previous reports using ferromagnetic metals. Most importantly, we observe robust anisotropic spin-to-charge conversion in RuO2, with voltage ratios of 30% for the (100)- and (110)-orientations and 40% for the (101)-orientations. The ratio remains consistent across RuO2 films fabricated by sputtering, pulsed laser deposition, and molecular-beam epitaxy. These results conclusively show a robust and anisotropic spin Hall effect in RuO2 with the absence of altermagnetic spin-splitting contributions. Our study provides crucial insights and advances the understanding of spin-to-charge conversions in emerging materials with low crystal symmetries. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Ultrafast annealing process of MTJ using hybrid microwave annealing

Authors: Ming-Chun Hsu, Fan-Yun Chiu, Wei-Chi Aeneas Hsu, Chang-Shan Shen, Kun-Ping Huang, Tsun-Hsu Chang

Abstract: This paper discovers that the magnetic tunnel junction (MTJ) structure is successfully magnetized with hybrid microwave annealing, confirmed by the tunneling magnetoresistance (TMR) and Coercivity (Hc) results. Hybrid microwave annealing can transform CoFeB into a single crystal and form the Fe-O bond at the interface between CoFeB and MgO without adding an extra magnet. The annealing time is sign… ▽ More This paper discovers that the magnetic tunnel junction (MTJ) structure is successfully magnetized with hybrid microwave annealing, confirmed by the tunneling magnetoresistance (TMR) and Coercivity (Hc) results. Hybrid microwave annealing can transform CoFeB into a single crystal and form the Fe-O bond at the interface between CoFeB and MgO without adding an extra magnet. The annealing time is significantly reduced from the original 120 minutes to just 1 minute, allowing for rapid low-temperature annealing of the MTJ structure. The TEM results are used to determine the change in the lattice structure of CoFeB from amorphous to a single crystal, and the EELS result indicates the diffusion distribution of atoms in the MTJ structure. This hybrid annealing process can save a significant amount of fabrication time and is an energy-efficient alternative to the current fabrication process of MRAM. △ Less

Submitted 18 February, 2025; originally announced February 2025.

Comments: 3 pages, 5 figures

Crystalline Water Structure in Room-Temperature Clathrate State: Hydrogen-Bonded Pentagonal Rings

Authors: Ching-Hsiu Chen, Wei-Hao Hsu, Ryoko Oishi-Tomiyasu, Chi-Cheng Lee, Ming-Wen Chu, Ing-Shouh Hwang

Abstract: Water hydrogen bonding is extremely versatile; approximately 20 ice structures and several types of clathrate hydrate structures have been identified. These crystalline water structures form at temperatures below room temperature and/or at high pressure. We used transmission electron microscopy to study a new crystalline water structure in a clathrate state that is prepared by sandwiching gas-supe… ▽ More Water hydrogen bonding is extremely versatile; approximately 20 ice structures and several types of clathrate hydrate structures have been identified. These crystalline water structures form at temperatures below room temperature and/or at high pressure. We used transmission electron microscopy to study a new crystalline water structure in a clathrate state that is prepared by sandwiching gas-supersaturated water between graphene layers under ambient conditions. In this clathrate state, water molecules form a three-dimensional hydrogen bonding network that encloses gas-filled cages 2-4 nm in size. We derived the crystalline water structure by recording and analyzing electron diffraction patterns and performing first-principles calculations. The structure consists purely of pentagonal rings and has a topology similar to that of water ice XVII. The study proposed a mechanism for the formation of the clathrate state. The present results improve the understanding of interactions among water and small nonpolar molecules and offer novel insights into the local structures of ambient liquid water. △ Less

Submitted 31 August, 2024; originally announced September 2024.

Wavefront shaping simulations with augmented partial factorization

Authors: Ho-Chun Lin, Zeyu Wang, Chia Wei Hsu

Abstract: Wavefront shaping can tailor multipath interference to control multiple scattering of waves in complex optical systems. However, full-wave simulations that capture multiple scattering are computationally demanding given the large system size and the large number of input channels. Recently, an "augmented partial factorization" (APF) method was proposed to significantly speed-up such full-wave simu… ▽ More Wavefront shaping can tailor multipath interference to control multiple scattering of waves in complex optical systems. However, full-wave simulations that capture multiple scattering are computationally demanding given the large system size and the large number of input channels. Recently, an "augmented partial factorization" (APF) method was proposed to significantly speed-up such full-wave simulations. In this tutorial, we illustrate how to perform wavefront shaping simulations with the APF method using the open-source frequency-domain electromagnetic scattering solver MESTI. We present the foundational concepts and then walk through four examples: computing the scattering matrix of a slab with random permittivities, open high-transmission channels through disorder, focusing inside disorder with phase conjugation, and reflection matrix computation in a spatial focused-beam basis. The goal is to lower the barrier for researchers to use simulations to explore the rich phenomena enabled by wavefront shaping. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Full transmission of vectorial waves through 3D multiple-scattering media

Authors: Ho-Chun Lin, Chia Wei Hsu

Abstract: A striking prediction from the random matrix theory in mesoscopic physics is the existence of "open channels": waves that can use multipath interference to achieve perfect transmission across an opaque disordered medium even in the multiple-scattering regime. Realization of such open channels requires a coherent control of the complete incident wavefront. To date, the open channels have only been… ▽ More A striking prediction from the random matrix theory in mesoscopic physics is the existence of "open channels": waves that can use multipath interference to achieve perfect transmission across an opaque disordered medium even in the multiple-scattering regime. Realization of such open channels requires a coherent control of the complete incident wavefront. To date, the open channels have only been demonstrated in scalar two-dimensional (2D) structures, both experimentally and with numerical studies. Here, we utilize a recently proposed "augmented partial factorization" full-wave simulation method to compute the scattering matrix from 3D vectorial Maxwell's equations and demonstrate the existence of open channels in 3D disordered media. We examine the spatial profile of such open channels, demonstrate the existence of a bimodal transmission eigenvalue distribution with full control, and study the effects of incomplete polarization control and of a finite illumination area. This study confirms the validity of the random matrix theory in vectorial systems. The simulation framework provides full access to the complex multi-channel wave transport in 3D disordered systems, filling the gap left by experimental capabilities. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Statistical modeling of equilibrium phase transition in confined fluids

Authors: Gunjan Auti, Soumyadeep Paul, Wei-Lun Hsu, Shohei Chiashi, Shigeo Maruyama, Hirofumi Daiguji

Abstract: The phase transition of confined fluids in mesoporous materials deviates from that of bulk fluids due to the interactions with the surrounding heterogeneous structure. For example, adsorbed fluids in metal-organic-frameworks (MOFs) have atypical phase characteristics such as capillary condensation and higher-order phase transitions due to a strong heterogeneous field. Considering a many-body probl… ▽ More The phase transition of confined fluids in mesoporous materials deviates from that of bulk fluids due to the interactions with the surrounding heterogeneous structure. For example, adsorbed fluids in metal-organic-frameworks (MOFs) have atypical phase characteristics such as capillary condensation and higher-order phase transitions due to a strong heterogeneous field. Considering a many-body problem in the presence of a nonuniform external field, we model the host-guest and guest-guest interactions in MOFs. To solve the three-dimensional Ising model, we use the mean-field theory to approximate the guest-guest interactions and Mayer's f-functions to describe the host-guest interactions in a unit cell. Later, using Hill's theory of nanothermodynamics, we define differential thermodynamic functions to understand the distribution of intensive properties and integral thermodynamic functions to explain the phase transition in confined fluids. The investigation reveals a distinct behavior where fluids confined in larger pores undergo a discontinuous (first-order) phase transition, whereas those confined in smaller pores experience a continuous (higher-order) phase transition. Furthermore, the results indicate that the free-energy barrier for phase transitions is lower in confined fluids than in bulk fluids giving rise to a lower condensation pressure relative to the bulk saturation pressure. Finally, the integral thermodynamic functions are succinctly presented in the form of a phase diagram, marking an initial step toward a more practical approach for understanding the phase behavior of confined fluids. △ Less

Submitted 20 March, 2024; v1 submitted 5 March, 2024; originally announced March 2024.

Comments: 25 pages, 14 figures

Mott resistive switching initiated by topological defects

Authors: Alessandra Milloch, Ignacio Figueruelo-Campanero, Wei-Fan Hsu, Selene Mor, Simon Mellaerts, Francesco Maccherozzi, Larissa Ishibe Veiga, Sarnjeet S. Dhesi, Mauro Spera, Jin Won Seo, Jean-Pierre Locquet, Michele Fabrizio, Mariela Menghini, Claudio Giannetti

Abstract: Resistive switching is the fundamental process that triggers the sudden change of the electrical properties in solid-state devices under the action of intense electric fields. Despite its relevance for information processing, ultrafast electronics, neuromorphic devices, resistive memories and brain-inspired computation, the nature of the local stochastic fluctuations that drive the formation of me… ▽ More Resistive switching is the fundamental process that triggers the sudden change of the electrical properties in solid-state devices under the action of intense electric fields. Despite its relevance for information processing, ultrafast electronics, neuromorphic devices, resistive memories and brain-inspired computation, the nature of the local stochastic fluctuations that drive the formation of metallic nuclei out of the insulating state has remained hidden. Here, using operando X-ray nano-imaging, we have captured the early-stages of resistive switching in a V2O3-based device under working conditions. V2O3 is a paradigmatic Mott material, which undergoes a first-order metal-to-insulator transition coupled to a lattice transformation that breaks the threefold rotational symmetry of the rhombohedral metal phase. We reveal a new class of volatile electronic switching triggered by nanoscale topological defects of the lattice order parameter of the insulating phase. Our results pave the way to the use of strain engineering approaches to manipulate topological defects and achieve the full control of the electronic Mott switching. The concept of topology-driven reversible electronic transition is of interest for a broad class of quantum materials, comprising transition metal oxides, chalcogenides and kagome metals, that exhibit first-order electronic transitions coupled to a symmetry-breaking order. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Journal ref: Nature Communications, 15, 9414 (2024)

Formation of highly stable interfacial nitrogen gas hydrate overlayers under ambient conditions

Authors: Chung-Kai Fang, Cheng-Hao Chuang, Chih-Wen Yang, Zheng-Rong Guo, Wei-Hao Hsu, Chia-Hsin Wang, Ing-Shouh Hwang

Abstract: Surfaces (interfaces) dictate many physical and chemical properties of solid materials and adsorbates considerably affect these properties. Nitrogen molecules, which are the most abundant constituent in ambient air, are considered to be inert. Our study combining atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS), and thermal desorption spectroscopy (TDS) revealed that nitrogen… ▽ More Surfaces (interfaces) dictate many physical and chemical properties of solid materials and adsorbates considerably affect these properties. Nitrogen molecules, which are the most abundant constituent in ambient air, are considered to be inert. Our study combining atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS), and thermal desorption spectroscopy (TDS) revealed that nitrogen and water molecules can self-assemble into two-dimensional domains, forming ordered stripe structures on graphitic surfaces in both water and ambient air. The stripe structures of this study were composed of approximately 90% and 10% water and nitrogen molecules, respectively, and survived in ultra-high vacuum (UHV) conditions at temperatures up to approximately 350 K. Because pure water molecules completely desorb from graphitic surfaces in a UHV at temperatures lower than 200 K, our results indicate that the incorporation of nitrogen molecules substantially enhanced the stability of the crystalline water hydrogen bonding network. Additional studies on interfacial gas hydrates can provide deeper insight into the mechanisms underlying formation of gas hydrates. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Confinement-Induced Isosymmetric Metal-Insulator Transition in Ultrathin Epitaxial V2O3 Films

Authors: Simon Mellaerts, Claudio Bellani, Wei-Fan Hsu, Alberto Binetti, Koen Schouteden, Maria Recaman-Payo, Mariela Menghini, Juan Rubio Zuazo, Jesús López Sánchez, Jin Won Seo, Michel Houssa, Jean-Pierre Locquet

Abstract: Dimensional confinement has shown to be an effective strategy to tune competing degrees of freedom in complex oxides. Here, we achieved atomic layered growth of trigonal vanadium sesquioxide (V2O3) by means of oxygen-assisted molecular beam epitaxy. This led to a series of high-quality epitaxial ultrathin V2O3 films down to unit cell thickness, enabling the study of the intrinsic electron correlat… ▽ More Dimensional confinement has shown to be an effective strategy to tune competing degrees of freedom in complex oxides. Here, we achieved atomic layered growth of trigonal vanadium sesquioxide (V2O3) by means of oxygen-assisted molecular beam epitaxy. This led to a series of high-quality epitaxial ultrathin V2O3 films down to unit cell thickness, enabling the study of the intrinsic electron correlations upon confinement. By electrical and optical measurements, we demonstrate a dimensional confinement-induced metal-insulator transition in these ultrathin films. We shed light on the Mott-Hubbard nature of this transition, revealing an abrupt vanishing of the quasiparticle weight as demonstrated by photoemission spectroscopy. Furthermore, we prove that dimensional confinement acts as an effective out-of-plane stress. This highlights the structural component of correlated oxides in a confined architecture, while opening an avenue to control both in-plane and out-of-plane lattice components by epitaxial strain and confinement, respectively. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Journal ref: ACS Appl. Mater. Interfaces 2021, 13, 30941-30949

Thermodynamic Bifurcations of Boiling in Solid-State Nanopores

Authors: Soumyadeep Paul, Yusuke Ito, Wei-Lun Hsu, Hirofumi Daiguji

Abstract: Boiling heat transfer is the basis of many commonly used cooling techniques. In cooling of electronic devices, for example, it is desirable to further miniaturize heat exchangers to achieve higher heat transfer, and thus it is necessary to understand boiling phenomena on shorter spatial and temporal scales. This is especially challenging at the nanometer scale because conventional imaging techniqu… ▽ More Boiling heat transfer is the basis of many commonly used cooling techniques. In cooling of electronic devices, for example, it is desirable to further miniaturize heat exchangers to achieve higher heat transfer, and thus it is necessary to understand boiling phenomena on shorter spatial and temporal scales. This is especially challenging at the nanometer scale because conventional imaging techniques cannot capture the dynamics of nanobubbles, owing to the Abbe diffraction limit. Here in this research, we utilize the nanopore Joule heating system that enables the generation of nanobubbles and simultaneous diagnosis of their nanosecond resolution dynamics using resistive pulse sensing. When a bias voltage is applied across a silicon nitride nanopore immersed in an aqueous salt solution, Joule heat is generated owing to the flow of ionic current. With increasing voltage, the Joule heating intensifies, and the temperature and entropy production in the pore increase. Our sensing results show that nanopore boiling follows the theory of minimum entropy production and attempts to settle to a minimum dissipative state. This results in two boiling bifurcations corresponding to the transition between different boiling states. These characteristics of nanopore boiling are represented by an "M"-shaped boiling curve, experimentally obtained from the Joule heat variation with the applied voltage. A theoretical framework is proposed to model the thermodynamics of nanopore bubbles and estimate the system dissipation which explains the four arms of the "M"-shaped boiling curve. The present study reveals that the utilization of nanopore boiling as a benchmark platform offers a valuable means for investigating the intricate boiling phenomenon and its correlation with nanoscale bubble dynamics. This would provide fundamental insights into the chaotic transition boiling regime, which is least understood. △ Less

Submitted 24 August, 2023; originally announced August 2023.

Comments: 12 pages, 4 figures

Replica exchange of expanded ensembles: A generalized ensemble approach with enhanced flexibility and parallelizability

Authors: Wei-Tse Hsu, Michael R. Shirts

Abstract: Generalized ensemble methods such as Hamiltonian replica exchange (HREX) and expanded ensemble (EE) have been shown effective in free energy calculations for various contexts, given their ability to circumvent free energy barriers via nonphysical pathways defined by states with different modified Hamiltonians. However, both HREX and EE methods come with drawbacks, such as limited flexibility in pa… ▽ More Generalized ensemble methods such as Hamiltonian replica exchange (HREX) and expanded ensemble (EE) have been shown effective in free energy calculations for various contexts, given their ability to circumvent free energy barriers via nonphysical pathways defined by states with different modified Hamiltonians. However, both HREX and EE methods come with drawbacks, such as limited flexibility in parameter specification, or the lack of parallelizability for more complicated applications. To address this challenge, we present the method of replica exchange of expanded ensembles (REXEE), which integrates the principles of HREX and EE methods by periodically exchanging coordinates of EE replicas sampling different yet overlapping sets of alchemical states. With the solvation free energy calculation of anthracene and binding free energy calculation of the CB7-10 binding complex, we show that the REXEE method achieves the same level of accuracy in free energy calculations as the HREX and EE methods, while offering enhanced flexibility and parallelizability. Additionally, we examined REXEE simulations with various setups to understand how different exchange frequencies and replica configurations influence the sampling efficiency in the fixed-weight phase and the weight convergence in the weight-updating phase. The REXEE approach can be further extended to support asynchronous parallelization schemes, allowing looser communications between larger numbers of loosely coupled processors such as cloud computing and therefore promising much more scalable and adaptive executions of alchemical free energy calculations. All algorithms for the REXEE method are available in the Python package ensemble_md, which offers an interface for REXEE simulation management without modifying the source code in GROMACS. △ Less

Submitted 11 April, 2024; v1 submitted 14 August, 2023; originally announced August 2023.

Coherent control of the orbital occupation driving the insulator-to-metal Mott transition in V$_2$O$_3$

Authors: Paolo Franceschini, Veronica R. Policht, Alessandra Milloch, Andrea Ronchi, Selene Mor, Simon Mellaerts, Wei-Fan Hsu, Stefania Pagliara, Gabriele Ferrini, Francesco Banfi, Michele Fabrizio, Mariela Menghini, Jean-Pierre Locquet, Stefano Dal Conte, Giulio Cerullo, Claudio Giannetti

Abstract: Managing light-matter interactions on timescales faster than the loss of electronic coherence is key for achieving full quantum control of the final products in solid-solid transformations. In this work, we demonstrate coherent electronic control of the photoinduced insulator-to-metal transition in the prototypical Mott insulator V$_2$O$_3$. Selective excitation of a specific interband transition… ▽ More Managing light-matter interactions on timescales faster than the loss of electronic coherence is key for achieving full quantum control of the final products in solid-solid transformations. In this work, we demonstrate coherent electronic control of the photoinduced insulator-to-metal transition in the prototypical Mott insulator V$_2$O$_3$. Selective excitation of a specific interband transition with two phase-locked light pulses manipulates the orbital occupation of the correlated bands in a way that depends on the coherent evolution of the photoinduced superposition of states. A comparison between experimental results and numerical solutions of the optical Bloch equations provides an electronic coherence time on the order of 5 fs. Temperature-dependent experiments suggest that the electronic coherence time is enhanced in the vicinity of the insulator-to-metal transition critical temperature, thus highlighting the role of fluctuations in determining the electronic coherence. These results open new routes to selectively switch the functionalities of quantum materials and coherently control solid-solid electronic transformations. △ Less

Submitted 12 May, 2023; v1 submitted 3 November, 2022; originally announced November 2022.

Journal ref: Phys. Rev. B 107 (16), L161110 (2023)

Boiling in Nanopores through Localized Joule Heating: Transition between Nucleate and Film Boiling

Authors: Soumyadeep Paul, Wei-Lun Hsu, Yusuke Ito, Hirofumi Daiguji

Abstract: The transition from nucleate to film boiling on micro/nano textured surfaces is of crucial importance in a number of practical applications, where it needs to be avoided to enable safe and efficient heat transfer. Previous studies have focused on the transition process at the macroscale, where heat transfer and bubble generation are activated on an array of micro/nanostructures. In the present stu… ▽ More The transition from nucleate to film boiling on micro/nano textured surfaces is of crucial importance in a number of practical applications, where it needs to be avoided to enable safe and efficient heat transfer. Previous studies have focused on the transition process at the macroscale, where heat transfer and bubble generation are activated on an array of micro/nanostructures. In the present study, we narrow down our investigation scale to a single nanopore, where, through localized Joule heating within the pore volume, single-bubble nucleation and transition are examined at nanosecond resolution using resistive pulse sensing and acoustic sensing. Akin to macroscale boiling, where heterogeneous bubbles can nucleate and coalesce into a film, in the case of nanopores also, patches of heterogeneous bubbles nucleating on the cylindrical pore surface can form a torus-shaped vapor film blanketing the entire pore surface. In contrast to conventional pool boiling, nanopore boiling involves a reverse transition mechanism, where, with increased heat generation, film boiling reverts to nucleate boiling. With increasing bias voltage across the nanopore, the Joule heat production increases within the pore, leading to destabilization and collapse of the torus-shaped vapor film. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Comments: 18 pages, 7 figures

Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations

Authors: J. Salamania, D. G. Sangiovanni, A. Kraych, K. M. Calamba Kwick, I. C. Schramm, L. J. S. Johnson, R. Boyd, B. Bakhit, T. W. Hsu, M. Mrovec, L. Rogström, F. Tasnádi, I. A. Abrikosov, M. Odén

Abstract: Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterized thin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. By high-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These includ… ▽ More Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterized thin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. By high-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These include, besides the expected primary full a/2{110}<1$\bar{1}$0> dislocation, Shockley partial dislocations a/6{111}<11$\bar{2}$> and sessile Lomer edge dislocations a/2{100}<011>. Density-functional theory and classical interatomic potential simulations complement STEM observations by recovering the atomic structure of the different dislocation types, estimating Peierls stresses, and providing insights on the chemical bonding nature at the core. The generated models of the dislocation cores suggest locally enhanced metal-metal bonding, weakened Ti-N bonds, and N vacancy-pinning that effectively reduces the mobilities of {110}<1$\bar{1}$0> and {111}<11$\bar{2}$> dislocations. Our findings underscore that the presence of different dislocation types and their effects on chemical bonding should be considered in the design and interpretations of nanoscale and macroscopic properties of TiN. △ Less

Submitted 28 October, 2022; v1 submitted 13 June, 2022; originally announced June 2022.

Adding alchemical variables to metadynamics to enhance sampling in free energy calculations

Authors: Wei-Tse Hsu, Valerio Piomponi, Pascal T. Merz, Giovanni Bussi, Michael R. Shirts

Abstract: Performing alchemical transformations, in which one molecular system is nonphysically changed to another system, is a popular approach adopted in performing free energy calculations associated with various biophysical processes, such as protein-ligand binding or the transfer of a molecule between environments. While the sampling of alchemical intermediate states in either parallel (e.g. Hamiltonia… ▽ More Performing alchemical transformations, in which one molecular system is nonphysically changed to another system, is a popular approach adopted in performing free energy calculations associated with various biophysical processes, such as protein-ligand binding or the transfer of a molecule between environments. While the sampling of alchemical intermediate states in either parallel (e.g. Hamiltonian replica exchange) or serial manner (e.g. expanded ensemble) can bridge the high-probability regions in the configurational space between two end states of interest, alchemical methods can fail in scenarios where the most important slow degrees of freedom in the configurational space are in large part orthogonal to the alchemical variable, or if the system gets trapped in a deep basin extending in both the configurational and alchemical space. To alleviate these issues, we propose to use alchemical variables as an additional dimension in metadynamics, augmenting the ability both to sample collective variables and to enhance sampling in free energy calculations. In this study, we validate our implementation of alchemical metadynamics in PLUMED with test systems and alchemical processes with varying complexities and dimensions of collective variable space, including the interconversion between the torsional metastable states of a toy system and the methylation of a nucleoside both in the isolated form and in a duplex. We show that multi-dimensional alchemical metadynamics can address the challenges mentioned above and further accelerate sampling by introducing configurational collective variables. The method can trivially be combined with other metadynamics-based algorithms implemented in PLUMED. The necessary PLUMED code changes have already been released for general use in PLUMED 2.8. △ Less

Submitted 9 December, 2022; v1 submitted 2 June, 2022; originally announced June 2022.

Fast multi-source nanophotonic simulations using augmented partial factorization

Authors: Ho-Chun Lin, Zeyu Wang, Chia Wei Hsu

Abstract: Full-wave simulations are indispensable for nanophotonics and electromagnetics but are severely constrained on large systems, especially multi-channel ones such as disordered media, aperiodic metasurfaces, and densely packed photonic circuits where each input requires a large-scale simulation. Here we bypass the computationally demanding solution of Maxwell's equations and directly evaluate the fu… ▽ More Full-wave simulations are indispensable for nanophotonics and electromagnetics but are severely constrained on large systems, especially multi-channel ones such as disordered media, aperiodic metasurfaces, and densely packed photonic circuits where each input requires a large-scale simulation. Here we bypass the computationally demanding solution of Maxwell's equations and directly evaluate the full-wave multi-input response, with no approximation. We augment the Maxwell operator with all input source profiles and output projection profiles, followed by a single partial factorization that directly yields the entire multi-input scattering matrix via the Schur complement. This method is simple to implement and applies to any linear partial differential equation. Its advantage grows with size, being 1,000 to 30,000,000 times faster than existing methods for systems with about ten million variables. We use it to realize the first full-wave simulations of entangled-photon backscattering from disorder and all-angle characterizations of high-numerical-aperture metalenses that are thousands of wavelengths wide. This work reveals the significant efficiency gain when we rethink what to compute and enables the exploration of diverse multi-channel systems. △ Less

Submitted 29 June, 2022; v1 submitted 16 May, 2022; originally announced May 2022.

Journal ref: Nature Computational Science 2, 815 (2022)

Coherent enhancement of optical remission in diffusive media

Authors: Nicholas Bender, Arthur Goetschy, Chia Wei Hsu, Hasan Yilmaz, Pablo Jara Palacios, Alexey Yamilov, Hui Cao

Abstract: From the earth's crust to the human brain, remitted waves are used for sensing and imaging in a diverse range of diffusive media. Separating the source and detector increases the penetration depth of remitted light, yet rapidly decreases the signal strength, leading to a poor signal-to-noise ratio. Here, we experimentally and numerically show that wavefront shaping a laser beam incident on a diffu… ▽ More From the earth's crust to the human brain, remitted waves are used for sensing and imaging in a diverse range of diffusive media. Separating the source and detector increases the penetration depth of remitted light, yet rapidly decreases the signal strength, leading to a poor signal-to-noise ratio. Here, we experimentally and numerically show that wavefront shaping a laser beam incident on a diffusive sample enables an order of magnitude remission enhancement, with a penetration depth of up to 10 transport mean free paths. We develop a theoretical model which predicts the maximal-remission enhancement. Our analysis reveals a significant improvement in the sensitivity of remitted waves, to local changes of absorption deep inside diffusive media. This work illustrates the potential of coherent wavefront control for non-invasive diffuse-wave imaging applications, such as diffuse optical tomography and functional near-infrared spectroscopy. △ Less

Submitted 30 April, 2022; originally announced May 2022.

Journal ref: Proc. Natl. Acad. Sci. U.S.A. Vol. 119, e2207089119 (2022)

Observation of Mesoscopic Clathrate Structures in Ethanol-Water Mixtures

Authors: Wei-Hao Hsu, Tzu-Chieh Yen, Chien-Chun Chen, Chih-Wen Yang, Chung-Kai Fang, Ing-Shouh Hwang

Abstract: Water-alcohol mixtures exhibit many abnormal physicochemical properties, the origins of which remain controversial. Here we use transmission electron microscopy (TEM), nanoparticle tracking analysis (NTA), and atomic force microscopy (AFM) to study ethanol-water mixtures. TEM reveals mesoscopic clathrate structures with water molecules forming a crystalline matrix hosting a high density of tiny ce… ▽ More Water-alcohol mixtures exhibit many abnormal physicochemical properties, the origins of which remain controversial. Here we use transmission electron microscopy (TEM), nanoparticle tracking analysis (NTA), and atomic force microscopy (AFM) to study ethanol-water mixtures. TEM reveals mesoscopic clathrate structures with water molecules forming a crystalline matrix hosting a high density of tiny cells. The presence of these mesoscopic clathrate structures is further supported by a refractive index of 1.27+-0.02 at 405 nm measured via NTA and the hydrophilic nature of the mesoscopic structures implied by AFM observations, explaining many long-standing puzzles related to water-alcohol mixtures. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Quantitative determination of interlayer electronic coupling at various critical points in bilayer MoS2

Authors: Wei-Ting Hsu, Jiamin Quan, Chi-Ruei Pan, Peng-Jen Chen, Mei-Yin Chou, Wen-Hao Chang, Allan H MacDonald, Xiaoqin Li, Jung-Fu Lin, Chih-Kang Shih

Abstract: Tailoring interlayer coupling has emerged as a powerful tool to tune the electronic structure of van der Waals (vdW) bilayers. One example is the usage of the moire pattern to create controllable two-dimensional electronic superlattices through the configurational dependence of interlayer electronic couplings. This approach has led to some remarkable discoveries in twisted graphene bilayers, and t… ▽ More Tailoring interlayer coupling has emerged as a powerful tool to tune the electronic structure of van der Waals (vdW) bilayers. One example is the usage of the moire pattern to create controllable two-dimensional electronic superlattices through the configurational dependence of interlayer electronic couplings. This approach has led to some remarkable discoveries in twisted graphene bilayers, and transition metal dichalcogenide (TMD) homo- and hetero-bilayers. However, a largely unexplored factor is the interlayer distance, d, which can impact the interlayer coupling strength exponentially. In this letter, we quantitatively determine the coupling strengths as a function of interlayer spacing at various critical points of the Brillouin zone in bilayer MoS2. The exponential dependence of the coupling parameter on the gap distance is demonstrated. Most significantly, we achieved a 280% enhancement of K-valley coupling strength with an 8% reduction of the vdW gap, pointing to a new strategy in designing a novel electronic system in vdW bilayers. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Influences of Dielectric Constant and Scan Rate to Hysteresis Effect in Perovskite Solar Cell: Simulation and Experimental Analyses

Authors: Jun-Yu Huang, You-Wei Yang, Wei-Hsuan Hsu, En-Wen Chang, Mei-Hsin Chen, Yuh-Renn Wu

Abstract: In this work, perovskite solar cells (PSCs) with different transport layers were fabricated to understand the hysteresis phenomenon under a series of scan rates. The experimental results show that the hysteresis phenomenon would be affected by the dielectric constant of transport layers and scan rate significantly. To explain this, a modified Poisson and drift-diffusion solver coupled with a fully… ▽ More In this work, perovskite solar cells (PSCs) with different transport layers were fabricated to understand the hysteresis phenomenon under a series of scan rates. The experimental results show that the hysteresis phenomenon would be affected by the dielectric constant of transport layers and scan rate significantly. To explain this, a modified Poisson and drift-diffusion solver coupled with a fully time-dependent ion migration model is developed to analyze how the ion migration affects the performance and hysteresis of PSCs. The simulation model was optimized for carrier transportation of organic materials, which can simulate the organic transport layer correctly without using heavy doping in simulating the organic transport layer. The modeling results show that the most crucial factor in the hysteresis behavior is the built-in electric field of the perovskite. The non-linear hysteresis curves are demonstrated under different scan rates, and the mechanism of the hysteresis behavior is explained. The findings reveal why the change in hysteresis degree with scan rate is Gaussian shaped rather than monotonic. Additionally, other factors contributing to the degree of hysteresis are determined to be the degree of degradation in the perovskite material, the quality of the perovskite crystal, and the materials of the transport layer, which corresponds to the total ion density, carrier lifetime of perovskite, and the dielectric constant of the transport layer, respectively. Finally, it was found that the dielectric constant of the transport layer is a key factor affecting hysteresis in perovskite solar cells; a lower dielectric constant corresponds to a higher electric field of the transport layer. Hence, if the electric field of the perovskite material is small, the degree of hysteresis is small and vice versa. △ Less

Submitted 21 May, 2022; v1 submitted 23 June, 2021; originally announced June 2021.

Comments: A complete study of hysteresis behavior with a complete simulation program

Journal ref: Scientific Reports, 12, 7927, 2022

Depth-Targeted Energy Deposition Deep Inside Scattering Media

Authors: Nicholas Bender, Alexey Yamilov, Arthur Goetschy, Hasan Yilmaz, Chia Wei Hsu, Hui Cao

Abstract: A grand challenge in fundamental physics and practical applications is overcoming wave diffusion to deposit energy into a target region deep inside a diffusive system. While it is known that coherently controlling the incident wavefront allows diffraction-limited focusing inside a diffusive system, in many applications targets are significantly larger than such a focus and the maximum deliverable… ▽ More A grand challenge in fundamental physics and practical applications is overcoming wave diffusion to deposit energy into a target region deep inside a diffusive system. While it is known that coherently controlling the incident wavefront allows diffraction-limited focusing inside a diffusive system, in many applications targets are significantly larger than such a focus and the maximum deliverable energy remains unknown. Here, we introduce the "deposition matrix", which maps an input wavefront to its internal field distribution, and theoretically predict the ultimate limitations on energy deposition at any depth. For example, the maximum obtainable energy enhancement occurs at 3/4 a diffusive system's thickness: regardless of its scattering strength. Experimentally we measure the deposition matrix and excite its eigenstates to enhance/suppress the energy within an extended target region. Our theoretical analysis reveals that such enhancement/suppression results from both selective transmission eigenchannel excitation and constructive/destructive interference among these channels. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Journal ref: Nat. Phys. Vol. 18, 309-315 (2022)

Observation of bound states in the continuum embedded in symmetry bandgaps

Authors: Alexander Cerjan, Christina Jörg, Sachin Vaidya, Shyam Augustine, Wladimir A. Benalcazar, Chia Wei Hsu, Georg von Freymann, Mikael C. Rechtsman

Abstract: In the last decade, symmetry-protected bound states in the continuum (BICs) have proven to be an important design principle for creating and enhancing devices reliant upon states with high quality (Q) factors, such as sensors, lasers, and those for harmonic generation. However, as we show, current implementations of symmetry-protected BICs in photonic crystal slabs can only be found at the center… ▽ More In the last decade, symmetry-protected bound states in the continuum (BICs) have proven to be an important design principle for creating and enhancing devices reliant upon states with high quality (Q) factors, such as sensors, lasers, and those for harmonic generation. However, as we show, current implementations of symmetry-protected BICs in photonic crystal slabs can only be found at the center of the Brillouin zone and below the Bragg-diffraction limit, which fundamentally restricts their use to single-frequency applications. By 3D-micro printing a photonic crystal structure using two-photon polymerization, we demonstrate that this limitation can be overcome by altering the radiative environment surrounding the slab to be a three-dimensional photonic crystal. This allows for the protection of a line of BICs by embedding it in a symmetry bandgap of the crystal. Moreover, we experimentally verify that just a single layer of this photonic crystal environment is sufficient. This concept significantly expands the design freedom available for developing next-generation devices with high-Q states. △ Less

Submitted 8 January, 2022; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: 18 pages, 10 figures

Journal ref: Science Advances 7 (2021) eabk1117

Customizing the angular memory effect for scattering media

Authors: Hasan Yılmaz, Matthias Kühmayer, Chia Wei Hsu, Stefan Rotter, Hui Cao

Abstract: The memory effect in disordered systems is a key physical phenomenon that has been employed for optical imaging, metrology, and communication through opaque media. Under the conventional memory effect, when the incident beam is tilted slightly, the transmitted pattern tilts in the same direction. However, the "memory" is limited in its angular range and tilt direction. Here, we present a general a… ▽ More The memory effect in disordered systems is a key physical phenomenon that has been employed for optical imaging, metrology, and communication through opaque media. Under the conventional memory effect, when the incident beam is tilted slightly, the transmitted pattern tilts in the same direction. However, the "memory" is limited in its angular range and tilt direction. Here, we present a general approach to customize the memory effect by introducing an angular memory operator. Its eigenstates possess perfect correlation for tilt angles and directions that can be arbitrarily chosen separately for the incident and transmitted waves, and can be readily realized with wavefront shaping. This work reveals the power of wavefront shaping in creating any desired memory for applications of classical and quantum waves in complex systems. △ Less

Submitted 27 May, 2021; v1 submitted 16 October, 2020; originally announced October 2020.

Journal ref: Phys. Rev. X 11, 031010 (2021)

Phonon Renormalization in Reconstructed MoS$_2$ Moiré Superlattices

Authors: Jiamin Quan, Lukas Linhart, Miao-Ling Lin, Daehun Lee, Jihang Zhu, Chun-Yuan Wang, Wei-Ting Hsu, Junho Choi, Jacob Embley, Carter Young, Takashi Taniguchi, Kenji Watanabe, Chih-Kang Shih, Keji Lai, Allan H. MacDonald, Ping-Heng Tan, Florian Libisch, Xiaoqin Li

Abstract: In moiré crystals formed by stacking van der Waals (vdW) materials, surprisingly diverse correlated electronic phases and optical properties can be realized by a subtle change in the twist angle. Here, we discover that phonon spectra are also renormalized in MoS$_2$ twisted bilayers, adding a new perspective to moiré physics. Over a range of small twist angles, the phonon spectra evolve rapidly du… ▽ More In moiré crystals formed by stacking van der Waals (vdW) materials, surprisingly diverse correlated electronic phases and optical properties can be realized by a subtle change in the twist angle. Here, we discover that phonon spectra are also renormalized in MoS$_2$ twisted bilayers, adding a new perspective to moiré physics. Over a range of small twist angles, the phonon spectra evolve rapidly due to ultra-strong coupling between different phonon modes and atomic reconstructions of the moiré pattern. We develop a new low-energy continuum model for phonons that overcomes the outstanding challenge of calculating properties of large moiré supercells and successfully captures essential experimental observations. Remarkably, simple optical spectroscopy experiments can provide information on strain and lattice distortions in moiré crystals with nanometer-size supercells. The newly developed theory promotes a comprehensive and unified understanding of structural, optical, and electronic properties of moiré superlattices. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 21 pages, 4 figures

Single-Bubble Dynamics in Nanopores: Transition Between Homogeneous and Heterogeneous Nucleation

Authors: Soumyadeep Paul, Wei-Lun Hsu, Mirco Magnini, Lachlan R Mason, Ya-Lun Ho, Omar K Matar, Hirofumi Daiguji

Abstract: When applying a voltage bias across a thin nanopore, localized Joule heating can lead to single bubble nucleation, offering a unique platform for studying nanoscale bubble behavior, which is still poorly understood. Accordingly, we investigate bubble nucleation and collapse inside solid-state nanopores filled with electrolyte solutions and find that there exists a clear correlation between homo/he… ▽ More When applying a voltage bias across a thin nanopore, localized Joule heating can lead to single bubble nucleation, offering a unique platform for studying nanoscale bubble behavior, which is still poorly understood. Accordingly, we investigate bubble nucleation and collapse inside solid-state nanopores filled with electrolyte solutions and find that there exists a clear correlation between homo/heterogeneous bubble nucleation and the pore diameter. As the pore diameter is increased from 280 nm to 525 nm, the nucleation regime transitions from predominantly periodic homogeneous nucleation to a non-periodic mixture of homogeneous and heterogeneous nucleation. A transition barrier between the homogeneous and heterogeneous nucleation regimes is defined by considering the relative free-energy costs of cluster formation. A thermodynamic model considering the transition barrier and contact-line pinning on curved surfaces is constructed, which determines the possibility of heterogeneous nucleation. It is shown that the experimental bubble generation behavior is closely captured by our thermodynamic analysis, providing important information for controlling the periodic homogeneous nucleation of bubbles in nanopores. △ Less

Submitted 19 November, 2020; v1 submitted 26 July, 2020; originally announced July 2020.

Comments: 15 pages, 11 figures; revised version

Journal ref: Phys. Rev. Research 2, 043400 (2020)

Observation of terahertz magnon of Kaplan-Kittel exchange resonance in yttrium-iron garnet by Raman spectroscopy

Authors: Wei-Hung Hsu, Ka Shen, Yasuhiro Fujii, Akitoshi Koreeda, Takuya Satoh

Abstract: Backscattering Raman spectroscopic investigations were performed on an yttrium-iron garnet single crystal using linearly and circularly polarized light. A terahertz (THz) magnon of the Kaplan-Kittel (KK) exchange resonance was discovered, which had been regarded as unobservable via optical methods. The KK exchange resonance had a 7.8-THz frequency at 80 K, and the polarization selection rule led t… ▽ More Backscattering Raman spectroscopic investigations were performed on an yttrium-iron garnet single crystal using linearly and circularly polarized light. A terahertz (THz) magnon of the Kaplan-Kittel (KK) exchange resonance was discovered, which had been regarded as unobservable via optical methods. The KK exchange resonance had a 7.8-THz frequency at 80 K, and the polarization selection rule led to an antisymmetric Raman tensor of the $A_{2}$ mode. Moreover, the assignment of all the Raman-active phonon modes, $3A_{1g}$, $8E_{g}$, and $14T_{2g}$, was proposed. This study will stimulate further investigation of the coupling of THz magnons and phonons and pave the way toward THz optomagnonics. △ Less

Submitted 25 November, 2020; v1 submitted 8 May, 2020; originally announced May 2020.

Journal ref: Phys. Rev. B 102 (2020) 174432

Moiré Potential Impedes Interlayer Exciton Diffusion in van der Waals Heterostructures

Authors: Junho Choi, Wei-Ting Hsu, Li-Syuan Lu, Liuyang Sun, Hui-Yu Cheng, Ming-Hao Lee, Jiamin Quan, Kha Tran, Chun-Yuan Wang, Matthew Staab, Kayleigh Jones, Takashi Taniguchi, Kenji Watanabe, Ming-Wen Chu, Shangjr Gwo, Suenne Kim, Chih-Kang Shih, Xiaoqin Li, Wen-Hao Chang

Abstract: The properties of van der Waals (vdW) heterostructures are drastically altered by a tunable moiré superlattice arising from periodic variations of atomic alignment between the layers. Exciton diffusion represents an important channel of energy transport in semiconducting transition metal dichalcogenides (TMDs). While early studies performed on TMD heterobilayers have suggested that carriers and ex… ▽ More The properties of van der Waals (vdW) heterostructures are drastically altered by a tunable moiré superlattice arising from periodic variations of atomic alignment between the layers. Exciton diffusion represents an important channel of energy transport in semiconducting transition metal dichalcogenides (TMDs). While early studies performed on TMD heterobilayers have suggested that carriers and excitons exhibit long diffusion lengths, a rich variety of scenarios can exist. In a moiré crystal with a large supercell size and deep potential, interlayer excitons may be completely localized. As the moiré period reduces at a larger twist angle, excitons can tunnel between supercells and diffuse over a longer lifetime. The diffusion length should be the longest in commensurate heterostructures where the moiré superlattice is completely absent. In this study, we experimentally demonstrate that the moiré potential impedes interlayer exciton diffusion by comparing a number of WSe2/MoSe2 heterostructures prepared with chemical vapor deposition and mechanical stacking with accurately controlled twist angles. Our results provide critical guidance to developing 'twistronic' devices that explore the moiré superlattice to engineer material properties. △ Less

Submitted 23 December, 2019; originally announced December 2019.

Journal ref: Science Advances, 2020

Angular memory effect of transmission eigenchannels

Authors: Hasan Yılmaz, Chia Wei Hsu, Arthur Goetschy, Stefan Bittner, Stefan Rotter, Alexey Yamilov, Hui Cao

Abstract: The optical memory effect has emerged as a powerful tool for imaging through multiple-scattering media; however, the finite angular range of the memory effect limits the field of view. Here, we demonstrate experimentally that selective coupling of incident light into a high-transmission channel increases the angular memory-effect range. This enhancement is attributed to the robustness of the high-… ▽ More The optical memory effect has emerged as a powerful tool for imaging through multiple-scattering media; however, the finite angular range of the memory effect limits the field of view. Here, we demonstrate experimentally that selective coupling of incident light into a high-transmission channel increases the angular memory-effect range. This enhancement is attributed to the robustness of the high-transmission channels against perturbations such as sample tilt or wavefront tilt. Our work shows that the high-transmission channels provide an enhanced field of view for memory effect-based imaging through diffusive media. △ Less

Submitted 18 October, 2019; v1 submitted 14 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. Lett. 123, 203901 (2019)

Tailoring excitonic states of van der Waals bilayers through stacking configuration, band alignment and valley-spin

Authors: Wei-Ting Hsu, Bo-Han Lin, Li-Syuan Lu, Ming-Hao Lee, Ming-Wen Chu, Lain-Jong Li, Wang Yao, Wen-Hao Chang, Chih-Kang Shih

Abstract: Excitons in monolayer semiconductors have large optical transition dipole for strong coupling with light field. Interlayer excitons in heterobilayers, with layer separation of electron and hole components, feature large electric dipole that enables strong coupling with electric field and exciton-exciton interaction, at the cost that the optical dipole is substantially quenched (by several orders o… ▽ More Excitons in monolayer semiconductors have large optical transition dipole for strong coupling with light field. Interlayer excitons in heterobilayers, with layer separation of electron and hole components, feature large electric dipole that enables strong coupling with electric field and exciton-exciton interaction, at the cost that the optical dipole is substantially quenched (by several orders of magnitude). In this letter, we demonstrate the ability to create a new class of excitons in transition metal dichalcogenide (TMD) hetero- and homo-bilayers that combines the advantages of monolayer- and interlayer-excitons, i.e. featuring both large optical dipole and large electric dipole. These excitons consist of an electron that is well confined in an individual layer, and a hole that is well extended in both layers, realized here through the carrier-species specific layer-hybridization controlled through the interplay of rotational, translational, band offset, and valley-spin degrees of freedom. We observe different species of such layer-hybridized valley excitons in different heterobilayer and homobilayer systems, which can be utilized for realizing strongly interacting excitonic/polaritonic gases, as well as optical quantum coherent controls of bidirectional interlayer carrier transfer either with upper conversion or down conversion in energy. △ Less

Submitted 5 March, 2019; originally announced March 2019.

Essential properties of Li/Li$^+$ graphite intercalation compounds

Authors: Shih-Yang Lin, Wei-Bang Li, Ngoc Thanh Thuy Tran, Wen-Dung Hsu, Hsin-Yi Liu, Ming Fa-Lin

Abstract: The essential properties of graphite-based 3D systems are thoroughly investigated by the first-principles method. Such materials cover a simple hexagonal graphite, a Bernal graphite, and the stage-1 to stage-4 Li/Li$^+$ graphite intercalation compounds. The delicate calculations and the detailed analyses are done for their optimal stacking configurations, bong lengths, interlayer distances, free e… ▽ More The essential properties of graphite-based 3D systems are thoroughly investigated by the first-principles method. Such materials cover a simple hexagonal graphite, a Bernal graphite, and the stage-1 to stage-4 Li/Li$^+$ graphite intercalation compounds. The delicate calculations and the detailed analyses are done for their optimal stacking configurations, bong lengths, interlayer distances, free electron $\&$ hole densities, Fermi levels, transferred charges in chemical bondings, atom- or ion-dominated energy bands, spatial charge distributions and the significant variations after intercalation, Li-/Li$^+$- $\&$ C-orbital-decomposed DOSs. The above-mentioned physical quantities are sufficient in determining the critical orbital hybridizations responsible for the unusual fundamental properties. How to dramatically alter the low-lying electronic structures by modulating the quest-atom/quest-ion concentration is one of focuses, e.g., the drastic changes on the Fermi level, band widths, and number of energy bands. The theoretical predictions on the stage-n-dependent band structures could be examined by the high-resolution angle-resolved photoemission spectroscopy (ARPES). Most important, the low-energy DOSs near the Fermi might provide the reliable data for estimating the free carrier density due to the interlayer atomic interactions or the quest-atom/quest-ion intercalation. The van Hove singularities, which mainly arise from the critical points in energy-wave-vector space, could be directly examined by the experimental measurements of scanning tunneling spectroscopy (STS). Their features should be very useful in distinguishing the important differences among the stage-$n$ graphite intercalation compounds, and the distinct effects due to the atom or ion decoration. △ Less

Submitted 25 October, 2018; originally announced October 2018.

Perfectly absorbing exceptional points and chiral absorbers

Authors: William R. Sweeney, Chia Wei Hsu, Stefan Rotter, A. Douglas Stone

Abstract: We identify a new kind of physically realizable exceptional point (EP) corresponding to degenerate coherent perfect absorption, in which two purely incoming solutions of the wave operator for electromagnetic or acoustic waves coalesce to a single state. Such non-hermitian degeneracies can occur at a real-valued frequency without any associated noise or non-linearity, in contrast to EPs in lasers.… ▽ More We identify a new kind of physically realizable exceptional point (EP) corresponding to degenerate coherent perfect absorption, in which two purely incoming solutions of the wave operator for electromagnetic or acoustic waves coalesce to a single state. Such non-hermitian degeneracies can occur at a real-valued frequency without any associated noise or non-linearity, in contrast to EPs in lasers. The absorption lineshape for the eigenchannel near the EP is quartic in frequency around its maximum in any dimension. In general, for the parameters at which an operator EP occurs, the associated scattering matrix does not have an EP. However, in one dimension, when the $S$-matrix does have a perfectly absorbing EP, it takes on a universal one-parameter form with degenerate values for all scattering coefficients. For absorbing disk resonators, these EPs give rise to chiral absorption: perfect absorption for only one sense of rotation of the input wave. △ Less

Submitted 25 July, 2018; v1 submitted 23 July, 2018; originally announced July 2018.

Comments: 6 pages main text, 4 supplemental; 3 figures

Journal ref: Phys. Rev. Lett. 122, 093901 (2019)

Statistical Description of Transport in Multimode Fibers with Mode-Dependent Loss

Authors: P. Chiarawongse, H. Li, W. Xiong, C. W. Hsu, H. Cao, T. Kottos

Abstract: We analyze coherent wave transport in a new physical setting associated with multimode wave systems where reflection is completely suppressed and mode-dependent losses together with mode-mixing are dictating the wave propagation. An additional physical constraint is the fact that in realistic circumstances the access to the scattering (or transmission) matrix is incomplete. We have addressed all t… ▽ More We analyze coherent wave transport in a new physical setting associated with multimode wave systems where reflection is completely suppressed and mode-dependent losses together with mode-mixing are dictating the wave propagation. An additional physical constraint is the fact that in realistic circumstances the access to the scattering (or transmission) matrix is incomplete. We have addressed all these challenges by providing a statistical description of wave transport which fuses together a free probability theory approach with a Filtered Random Matrix ensemble. Our theoretical predictions have been tested successfully against experimental data of light transport in multimode fibers. △ Less

Submitted 28 June, 2018; originally announced June 2018.

Journal ref: New Journal of Physics 20, 113028 (2018)

Excitation of coherent optical phonons in iron garnet by femtosecond laser pulses

Authors: Pritam Khan, Masataka Kanamaru, Wei-Hung Hsu, Minori Kichise, Yasuhiro Fujii, Akitoshi Koreeda, Takuya Satoh

Abstract: We employed femtosecond pump probe technique to investigate the dynamics of coherent optical phonons in iron garnet. A phenomenological symmetry-based consideration reveals that oscillations of the terahertz T2g mode are excited. Selective excitation by a linearly polarized pump and detection by a circularly polarized probe confirm that impulsive stimulated Raman scattering (ISRS) is the driving f… ▽ More We employed femtosecond pump probe technique to investigate the dynamics of coherent optical phonons in iron garnet. A phenomenological symmetry-based consideration reveals that oscillations of the terahertz T2g mode are excited. Selective excitation by a linearly polarized pump and detection by a circularly polarized probe confirm that impulsive stimulated Raman scattering (ISRS) is the driving force for the coherent phonons. Experimental results obtained from ISRS measurements reveal excellent agreement with spontaneous Raman spectroscopy data, analyzed by considering the symmetry of the phonon modes and corresponding excitation and detection selection rules. △ Less

Submitted 5 April, 2019; v1 submitted 13 February, 2018; originally announced February 2018.

Comments: 20 pages, 6 figures, 3 tables

Journal ref: Journal of Physics: Condensed Matter 2019

Observation of Bulk Fermi Arc and Polarization Half Charge from Paired Exceptional Points

Authors: Hengyun Zhou, Chao Peng, Yoseob Yoon, Chia Wei Hsu, Keith A. Nelson, Liang Fu, John D. Joannopoulos, Marin Soljacic, Bo Zhen

Abstract: The ideas of topology have found tremendous success in Hermitian physical systems, but even richer properties exist in the more general non-Hermitian framework. Here, we theoretically propose and experimentally demonstrate a new topologically-protected bulk Fermi arc which---unlike the well-known surface Fermi arcs arising from Weyl points in Hermitian systems---develops from non-Hermitian radiati… ▽ More The ideas of topology have found tremendous success in Hermitian physical systems, but even richer properties exist in the more general non-Hermitian framework. Here, we theoretically propose and experimentally demonstrate a new topologically-protected bulk Fermi arc which---unlike the well-known surface Fermi arcs arising from Weyl points in Hermitian systems---develops from non-Hermitian radiative losses in photonic crystal slabs. Moreover, we discover half-integer topological charges in the polarization of far-field radiation around the Fermi arc. We show that both phenomena are direct consequences of the non-Hermitian topological properties of exceptional points, where resonances coincide in their frequencies and linewidths. Our work connects the fields of topological photonics, non-Hermitian physics and singular optics, and paves the way for future exploration of non-Hermitian topological systems. △ Less

Submitted 10 September, 2017; originally announced September 2017.

Comments: 7 pages, 4 figures

Journal ref: Science 359, 1009-1012 (2018)

Photoacoustic signal enhancements from gold nano-colloidal suspensions excited by a pair of time-delayed femtosecond pulses

Authors: Frances Camille P. Masim, Wei-Hung Hsu, Hao-Li Liu, Tetsu Yonezawa, Armandas Balcytis, Saulius Juodkazis, Koji Hatanaka

Abstract: Photoacoustic signal enhancements were observed with a pair of time-delayed femtosecond pulses upon excitation of gold nanosphere colloidal suspension. A systematic experimental investigation of photoacoustic intensity within the delay time, t = 0 to 15 ns, was carried out. The results revealed a significant enhancement factor of ~2 when the pre-pulse energy is 20-30% of the total energy. Pre-puls… ▽ More Photoacoustic signal enhancements were observed with a pair of time-delayed femtosecond pulses upon excitation of gold nanosphere colloidal suspension. A systematic experimental investigation of photoacoustic intensity within the delay time, t = 0 to 15 ns, was carried out. The results revealed a significant enhancement factor of ~2 when the pre-pulse energy is 20-30% of the total energy. Pre-pulse and main pulse energy ratios, E(1)p-pol. :E(2)s-pol. were varied to determine the optimal ratio that yields to maximum photoacoustic signal enhancement. This enhancement was ascribed to the initial stage of thermalization and bubble generation in the nanosecond time scale. Pre-pulse scattering intensity measurements and numerical finite-difference time-domain calculations were performed to reveal dynamics and light field enchancement, respectively. △ Less

Submitted 25 July, 2017; originally announced July 2017.

Comments: 5 figures

Three-dimensional surface topography of graphene by divergent beam electron diffraction

Authors: Tatiana Latychevskaia, Wei-Hao Hsu, Wei-Tse Chang, Chun-Yueh Lin, Ing-Shouh Hwang

Abstract: There is only a handful of scanning techniques that can provide surface topography at nanometre resolution. At the same time, there are no methods that are capable of non-invasive imaging of the three-dimensional surface topography of a thin free-standing crystalline material. Here we propose a new technique - the divergent beam electron diffraction (DBED) and show that it can directly image the i… ▽ More There is only a handful of scanning techniques that can provide surface topography at nanometre resolution. At the same time, there are no methods that are capable of non-invasive imaging of the three-dimensional surface topography of a thin free-standing crystalline material. Here we propose a new technique - the divergent beam electron diffraction (DBED) and show that it can directly image the inhomogeneity in the atomic positions in a crystal. Such inhomogeneities are directly transformed into the intensity contrast in the first order diffraction spots of DBED patterns and the intensity contrast linearly depends on the wavelength of the employed probing electrons. Three-dimensional displacement of atoms as small as 1 angstrom can be detected when imaged with low-energy electrons (50 - 250 eV). The main advantage of DBED is that it allows visualisation of the three-dimensional surface topography and strain distribution at the nanometre scale in non-scanning mode, from a single shot diffraction experiment. △ Less

Submitted 5 March, 2017; originally announced March 2017.

Journal ref: Nature Communications 8, 14440, 2017

Hybrid optical-thermal antennas for enhanced light focusing and local temperature control

Authors: Svetlana V. Boriskina, Lee A. Weinstein, Jonathan K. Tong, Wei-Chun Hsu, Gang Chen

Abstract: Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical-thermal antennas that simultaneousl… ▽ More Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical-thermal antennas that simultaneously enable intensity enhancement at the operating wavelength in the visible and nanoscale local temperature control. We demonstrate a possibility to reduce the hybrid antenna operating temperature via enhanced infrared thermal emission. We predict via rigorous numerical modeling that hybrid optical-thermal antennas that support high-quality-factor photonic-plasmonic modes enable up to two orders of magnitude enhancement of localized electric fields and of the optical power absorbed in the nanoscale metal volume. At the same time, the hybrid antenna temperature can be lowered by several hundred degrees with respect to its all-metal counterpart under continuous irradiance of 104-105 W/m2. The temperature reduction effect is attributed to the enhanced radiative cooling, which is mediated by the thermally-excited localized surface phonon polariton modes. We further show that temperature reduction under even higher irradiances can be achieved by a combination of enhanced radiative and convective cooling in hybrid antennas. Finally, we demonstrate how hybrid optical-thermal antennas can be used to achieve strong localized heating of nanoparticles while keeping the rest of the optical chip at low temperature. △ Less

Submitted 11 August, 2016; originally announced August 2016.

Comments: 24 pages, 11 figures

Journal ref: ACS Photonics, 2016

Entropic and Near-Field Improvements of Thermoradiative Cells

Authors: Wei-Chun Hsu, Jonathan K. Tong, Bolin Liao, Yi Huang, Svetlana V. Boriskina, Gang Chen

Abstract: A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the effic… ▽ More A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the efficiency of thermoradiative cells via spectrally selecting long-wavelength photons for radiative exchange. Furthermore, we predict that the near-field photon extraction by coupling photons generated from interband electronic transition to phonon polariton modes on the surface of a heat sink can increase the conversion efficiency as well as the power generation density, providing more opportunities to efficiently utilize terrestrial emission for clean energy. An ideal InSb thermoradiative cell can achieve a maximum efficiency and power density up to 20.4 % and 327 Wm-2, respectively, between a hot source at 500K and a cold sink at 300K. However, sub-bandgap and non-radiative losses will significantly degrade the cell performance. △ Less

Submitted 16 September, 2016; v1 submitted 29 June, 2016; originally announced June 2016.

Journal ref: Scientific Reports 6, Article number: 34837 (2016)

Heat meets light on the nanoscale

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Wei-Chun Hsu, Bolin Liao, Yi Huang, Vazrik Chiloyan, Gang Chen

Abstract: We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, opti… ▽ More We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, optical refrigeration, personalized cooling technologies, development of coherent incandescent light sources, and spinoptics. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Comments: 46 pages, 11 figures; to appear in the special issue of Nanophotonics on 'Smart nanophotonics for renewable energy and sustainability' 2016

Efficient X-ray generation from gold colloidal solutions

Authors: Koji Hatanaka, Matteo Porta, Frances Camille P. Masim, Wei-Hung Hsu, Mai Thanh Nguyen, Tetsu Yonezawa, Armandas Balcytis, Saulius Juodkazis

Abstract: Hard X-ray generation for Au nanoparticle dispersion was systematically investigated for different particle diameters ranging from 10 to 100 nm with a narrow size distribution of +/- 2%. Scaling law of X-ray generation is close to a 6-photon process before the onset of saturation for excitation by 45 fs laser pulses with central wavelength of 800 nm. This is consistent with bulk plasmon excitation… ▽ More Hard X-ray generation for Au nanoparticle dispersion was systematically investigated for different particle diameters ranging from 10 to 100 nm with a narrow size distribution of +/- 2%. Scaling law of X-ray generation is close to a 6-photon process before the onset of saturation for excitation by 45 fs laser pulses with central wavelength of 800 nm. This is consistent with bulk plasmon excitation at wavelength ~ 138 nm. The longitudinal E-field component due to nanoparticle focusing is responsible for the excitation of the longitudinal bulk plasmon. The proposed analysis also explains X-ray emission from water breakdown via an electron solvation mechanism at ~6.2 eV. The most efficient emission of X-rays was observed for 40 +/- 10 nm diameter nanoparticles which also had the strongest UV extinction. X-ray emission was the most efficient when induced by pre-chirped 370 +/- 20 fs laser pulses and exhibited the highest intensity at a negative chirp. △ Less

Submitted 26 April, 2016; originally announced April 2016.

Preferential Gas Adsorption at the Graphene-Water interface

Authors: Hsien-Chen Ko, Wei-Hao Hsu, Chih-Wen Yang, Chung-Kai Fang, Yi-Hsien Lu, Ing-Shouh Hwang

Abstract: The contact of water with graphene is of fundamental importance and of great interest for numerous promising applications, but how graphene interacts with water remains unclear. Here we used atomic force microscopy to investigate hydrophilic mica substrates with some regions covered by mechanically exfoliated graphene layers in water. In water containing air gas close to the saturation concentrati… ▽ More The contact of water with graphene is of fundamental importance and of great interest for numerous promising applications, but how graphene interacts with water remains unclear. Here we used atomic force microscopy to investigate hydrophilic mica substrates with some regions covered by mechanically exfoliated graphene layers in water. In water containing air gas close to the saturation concentration (within ~40%), cap-shaped nanostructures and ordered stripe domains were observed on graphene-covered regions, but not on pure mica regions. These structures did not appear on graphene when samples were immersed in highly degassed water, indicating that their formation was caused by adsorption of gas dissolved in water. Thus, atomically thin graphene, even at a narrow width of 20 nm, changes the local surface chemistry of a highly hydrophilic substrate. Further, surface hydrophobicity significantly affects gas adsorption, which has broad implications for diverse phenomena in water. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Low-voltage coherent electron imaging based on a single-atom electron

Authors: Wei-Tse Chang, Chun-Yueh Lin, Wei-Hao Hsu, Mu-Tung Chang, Yi-Sheng Chen, En-Te Hwu, Ing-Shouh Hwang

Abstract: It has been a general trend to develop low-voltage electron microscopes due to their high imaging contrast of the sample and low radiation damage. Atom-resolved transmission electron microscopes with voltages as low as 15-40 kV have been demonstrated. However, achieving atomic resolution at voltages lower than 10 kV is extremely difficult. An alternative approach is coherent imaging or phase retri… ▽ More It has been a general trend to develop low-voltage electron microscopes due to their high imaging contrast of the sample and low radiation damage. Atom-resolved transmission electron microscopes with voltages as low as 15-40 kV have been demonstrated. However, achieving atomic resolution at voltages lower than 10 kV is extremely difficult. An alternative approach is coherent imaging or phase retrieval imaging, which requires a sufficiently coherent source and an adequately small detection area on the sample as well as the detection of high-angle diffracted patterns with a sufficient resolution. In this work, we propose several transmission-type schemes to achieve coherent imaging of thin materials (less than 5 nm thick) with atomic resolution at voltages lower than 10 kV. Experimental schemes of both lens-less and lens-containing designs are presented and the advantages and challenges of these schemes are discussed. Preliminary results based on a highly coherent single-atom electron source are presented. The image plate is designed to be retractable to record the transmission patterns at different positions along the beam propagation direction. In addition, reflection-type coherent electron imaging schemes are also proposed as novel methods for characterizing surface atomic and electronic structures of materials. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Hybrid optical-thermal devices and materials for light manipulation and radiative cooling

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Wei-Chun Hsu, Lee Weinstein, Xiaopeng Huang, James Loomis, Yanfei Xu, Gang Chen

Abstract: We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna… ▽ More We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna with sub-wavelength light focusing, which simultaneously enables intensity enhancement at the operating wavelength in the visible and reduction of the operating temperature. The enhancement is achieved via light recycling in the form of whispering-gallery modes trapped in an optical microcavity, while cooling functionality is realized via a combination of reduced optical absorption and radiative cooling. The other example is a fabric that is opaque in the visible range yet highly transparent in the infrared, which allows the human body to efficiently shed energy in the form of thermal emission. Such fabrics can find numerous applications for personal thermal management and for buildings energy efficiency improvement. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: Proc. SPIE 9546, Active Photonic Materials VII, 95461U (September 1, 2015) 7 pages, 4 figures

Limiting efficiencies of solar energy conversion and photo-detection via internal emission of hot electrons and hot holes in gold

Authors: Svetlana V. Boriskina, Jiawei Zhou, Wei-Chun Hsu, Bolin Liao, Gang Chen

Abstract: We evaluate the limiting efficiency of full and partial solar spectrum harvesting via the process of internal photoemission in Au-semiconductor Schottky junctions. Our results based on the ab initio calculations of the electron density of states (e-DOS) reveal that the limiting efficiency of the full-spectrum Au converter based on hot electron injection is below 4%. This value is even lower than p… ▽ More We evaluate the limiting efficiency of full and partial solar spectrum harvesting via the process of internal photoemission in Au-semiconductor Schottky junctions. Our results based on the ab initio calculations of the electron density of states (e-DOS) reveal that the limiting efficiency of the full-spectrum Au converter based on hot electron injection is below 4%. This value is even lower than previously established limit based on the parabolic approximation of the Au electron energy bands. However, we predict limiting efficiency exceeding 10% for the hot holes collection through the Schottky junction between Au and p-type semiconductor. Furthermore, we demonstrate that such converters have more potential if used as a part of the hybrid system for harvesting high- and low-energy photons of the solar spectrum. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: Proc. SPIE 9608, Infrared Remote Sensing and Instrumentation XXIII, 960816 (September 1, 2015) 7 pages, 4 figures

Theoretical description of a DNA-linked nanoparticle self-assembly

Authors: Chia Wei Hsu, Francesco Sciortino, Francis W. Starr

Abstract: Nanoparticles tethered with DNA strands are promising building blocks for bottom-up nanotechnology, and a theoretical understanding is important for future development. Here we build on approaches developed in polymer physics to provide theoretical descriptions for the equilibrium clustering and dynamics, as well as the self-assembly kinetics of DNA-linked nanoparticles. Striking agreement is obse… ▽ More Nanoparticles tethered with DNA strands are promising building blocks for bottom-up nanotechnology, and a theoretical understanding is important for future development. Here we build on approaches developed in polymer physics to provide theoretical descriptions for the equilibrium clustering and dynamics, as well as the self-assembly kinetics of DNA-linked nanoparticles. Striking agreement is observed between the theory and molecular modeling of DNA tethered nanoparticles. △ Less

Submitted 6 July, 2010; originally announced July 2010.

Comments: Accepted for publication in Physical Review Letters

Journal ref: Phys. Rev. Lett. 105, 055502 (2010)

Interpenetration as a Mechanism for Liquid-Liquid Phase Transitions

Authors: Chia Wei Hsu, Francis W. Starr

Abstract: We study simple lattice systems to demonstrate the influence of interpenetrating bond networks on phase behavior. We promote interpenetration by using a Hamiltonian with a weakly repulsive interaction with nearest neighbors and an attractive interaction with second-nearest neighbors. In this way, bond networks will form between second-nearest neighbors, allowing for two (locally) distinct networ… ▽ More We study simple lattice systems to demonstrate the influence of interpenetrating bond networks on phase behavior. We promote interpenetration by using a Hamiltonian with a weakly repulsive interaction with nearest neighbors and an attractive interaction with second-nearest neighbors. In this way, bond networks will form between second-nearest neighbors, allowing for two (locally) distinct networks to form. We obtain the phase behavior from analytic solution in the mean-field approximation and exact solution on the Bethe lattice. We compare these results with exact numerical results for the phase behavior from grand canonical Monte Carlo simulations on square, cubic, and tetrahedral lattices. All results show that these simple systems exhibit rich phase diagrams with two fluid-fluid critical points and three thermodynamically distinct phases. We also consider including third-nearest-neighbor interactions, which give rise to a phase diagram with four critical points and five thermodynamically distinct phases. Thus the interpenetration mechanism provides a simple route to generate multiple liquid phases in single-component systems, such as hypothesized in water and observed in several model and experimental systems. Additionally, interpenetration of many such networks appears plausible in a recently considered material made from nanoparticles functionalized by single strands of DNA. △ Less

Submitted 21 November, 2008; originally announced November 2008.

Comments: 12 pages, 9 figures, submitted to Phys. Rev. E

Journal ref: Phys. Rev. E 79, 041502 (2009)

Hierarchies of networked phases induced by multiple liquid-liquid critical points

Authors: Chia Wei Hsu, Julio Largo, Francesco Sciortino, Francis W. Starr

Abstract: Functionalization of nanoparticles or colloids is increasingly being used to develop customizable "atoms". Functionalization by attaching single strands of DNA allows for direct control of the binding between nanoparticles, since hybridization of double strands will only occur if the base sequences of single strands are complementary. Nanoparticles and colloids functionalized by four single stra… ▽ More Functionalization of nanoparticles or colloids is increasingly being used to develop customizable "atoms". Functionalization by attaching single strands of DNA allows for direct control of the binding between nanoparticles, since hybridization of double strands will only occur if the base sequences of single strands are complementary. Nanoparticles and colloids functionalized by four single strands of DNA can be thought of as designed analogs to tetrahedral network forming atoms and molecules, with a difference that the attached DNA strands allow for control of the length scale of bonding relative to the core size. We explore the behavior of an experimentally realized model for a nanoparticles functionalized by four single strands of DNA (a tetramer), and show that this single-component model exhibits a rich phase diagram with at least three critical points and four thermodynamically distinct amorphous phases. We demonstrate that the additional critical points are part of the Ising universality class, like the ordinary liquid-gas critical point. The dense phases consist of a hierarchy of interpenetrating networks, reminiscent of a woven cloth. Thus bonding specificity of DNA provides an effective route to generate new nano-networked materials with polyamorphic behavior. The concept of network interpenetration helps to explain the generation of multiple liquid phases in single-component systems, suggested to occur in some atomic and molecular network forming fluids, including water and silica. △ Less

Submitted 25 August, 2008; originally announced August 2008.

Comments: To appear in PNAS week of Aug. 25, 2008

Journal ref: Proceedings of the National Academy of Sciences 105, 13711 (2008)

Surface optical Raman modes in InN nanostructures

Authors: Satyaprakash Sahoo, M. S. Hu, C. W. Hsu, C. T. Wu, K. H. Chen, L. C. Chen, A. K. Arora, S. Dhara

Abstract: Raman spectroscopic investigations are carried out on one-dimensional nanostructures of InN,such as nanowires and nanobelts synthesized by chemical vapor deposition. In addition to the optical phonons allowed by symmetry; A1, E1 and E2(high) modes, two additional Raman peaks are observed around 528 cm-1 and 560 cm-1 for these nanostructures. Calculations for the frequencies of surface optical (S… ▽ More Raman spectroscopic investigations are carried out on one-dimensional nanostructures of InN,such as nanowires and nanobelts synthesized by chemical vapor deposition. In addition to the optical phonons allowed by symmetry; A1, E1 and E2(high) modes, two additional Raman peaks are observed around 528 cm-1 and 560 cm-1 for these nanostructures. Calculations for the frequencies of surface optical (SO) phonon modes in InN nanostructures yield values close to those of the new Raman modes. A possible reason for large intensities for SO modes in these nanostructures is also discussed. △ Less

Submitted 5 July, 2008; originally announced July 2008.

Comments: 13 pages, 4 figures, Submitted in Journal