-
Severe Plastic Deformation of Ceramics by High-Pressure Torsion: Review of Principles and Applications
Authors:
Kaveh Edalati,
Jacqueline Hidalgo-Jiménez,
Thanh Tam Nguyen,
Hadi Sena,
Nariman Enikeev,
Gerda Rogl,
Valery I. Levitas,
Zenji Horita,
Michael J. Zehetbauer,
Ruslan Z. Valiev,
Terence G. Langdon
Abstract:
Ceramics are typically brittle at ambient conditions due to their covalent or ionic bonding and limited dislocation activities. While plasticity, and occasionally superplasticity, can be achieved in ceramics at high temperatures through thermally activated phenomena, creep, and grain boundary sliding, their deformation at ambient temperature and pressure remains challenging. Processing under high…
▽ More
Ceramics are typically brittle at ambient conditions due to their covalent or ionic bonding and limited dislocation activities. While plasticity, and occasionally superplasticity, can be achieved in ceramics at high temperatures through thermally activated phenomena, creep, and grain boundary sliding, their deformation at ambient temperature and pressure remains challenging. Processing under high pressure via the high-pressure torsion (HPT) method offers new pathways for severe plastic deformation (SPD) of ceramics. This article reviews recent advances in HPT processing of ceramics, focusing primarily on traditional ceramics (e.g., oxides, carbides, nitrides, oxynitrides) and to a lesser extent advanced ceramics (e.g., silicon, carbon, perovskites, clathrates). Key structural and microstructural features of SPD-processed ceramics are discussed, including phase transformations and the generation of nanograins and defects such as vacancies and dislocations. The properties and applications of these deformed ceramics are summarized, including powder consolidation, photoluminescence, bandgap narrowing, photovoltaics, photocatalysis (dye degradation, plastic waste degradation, antibiotic degradation, hydrogen production, CO2 conversion), electrocatalysis, thermoelectric performance, dielectric performance, and ion conductivity for Li-ion batteries. Additionally, the article highlights the role of HPT in synthesizing novel materials, such as high-entropy ceramics (particularly high-entropy oxides), black oxides, and high-pressure polymorphs, which hold promise for energy and environmental applications.
△ Less
Submitted 7 July, 2025;
originally announced July 2025.
-
Impact of Severe Plastic Deformation on Kinetics and Thermodynamics of Hydrogen Storage in Magnesium and Its Alloys
Authors:
Kaveh Edalati,
Etsuo Akiba,
Walter J. Botta,
Yuri Estrin,
Ricardo Floriano,
Daniel Fruchart,
Thierry Grosdidier,
Zenji Horita,
Jacques Huot,
Hai-Wen Li,
Huai-Jun Lin,
Adam Revesz,
Michael J. Zehetbauer
Abstract:
Magnesium and its alloys are the most investigated materials for solid-state hydrogen storage in the form of metal hydrides, but there are still unresolved problems with the kinetics and thermodynamics of hydrogenation and dehydrogenation of this group of materials. Severe plastic deformation (SPD) methods, such as equal-channel angular pressing (ECAP), high-pressure torsion (HPT), intensive rolli…
▽ More
Magnesium and its alloys are the most investigated materials for solid-state hydrogen storage in the form of metal hydrides, but there are still unresolved problems with the kinetics and thermodynamics of hydrogenation and dehydrogenation of this group of materials. Severe plastic deformation (SPD) methods, such as equal-channel angular pressing (ECAP), high-pressure torsion (HPT), intensive rolling and fast forging, have been widely used to enhance the activation, air resistance, and hydrogenation/dehydrogenation kinetics of Mg-based hydrogen storage materials by introducing ultrafine/nanoscale grains and crystal lattice defects. These severely deformed materials, particularly in the presence of alloying additives or second-phase nanoparticles, can show not only fast hydrogen absorption/desorption kinetics but also good cycling stability. It was shown that some materials that are apparently inert to hydrogen can absorb hydrogen after SPD processing. Moreover, the SPD methods were effectively used for hydrogen binding-energy engineering and synthesizing new magnesium alloys with low thermodynamic stability for reversible low/room-temperature hydrogen storage, such as nanoglasses, high-entropy alloys, and metastable phases including the high-pressure γ-MgH2 polymorph. This article reviews recent advances in the development of Mg-based hydrogen storage materials by SPD processing and discusses their potential in future applications.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Strain effects on the wear rate of severely deformed copper
Authors:
Evander Ramos,
Takahiro Masuda,
Sina Shahrezaei,
Zenji Horita,
Suveen Mathaudhu
Abstract:
A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to process discs with low strain in the center and high strain at the outer edge. In the literature, this inhomogeneity is typically ignored when characterizing wear pr…
▽ More
A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to process discs with low strain in the center and high strain at the outer edge. In the literature, this inhomogeneity is typically ignored when characterizing wear properties after HPT. In this work, the wear rate of pure copper discs processed by HPT was characterized by conducting dry sliding reciprocating wear tests at a few judicious locations on the discs. From only two discs, the wear resistance across many ranges of strains was captured. These measurements agreed with the literature for other SPD processes at varying strains. Wear rates dropped and plateaued at about 25% that of the unprocessed state when processing past equivalent strains of around 15, after which microstructural and microhardness saturation has also been observed. Some indication of a relationship between the direction of the imposed SPD shearing and the sliding wear direction was also observed. The incremental microstructure, microhardness, and wear resistance evolution past equivalent strains of ~15 indicate that for high purity copper these properties receive no clear benefit from higher SPD strains.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Achieving highly strengthened Al-Cu-Mg alloy by grain refinement and grain boundary segregation
Authors:
Takahiro Masuda,
Xavier Sauvage,
Shoichi Hirosawa,
Zenji Horita
Abstract:
An age-hardenable Al-Cu-Mg alloy (A2024) was processed by high-pressure torsion (HPT) for producing an ultrafine-grained structure. The alloy was further aged for extra strengthening. The tensile strength then reached a value as high as ~1 GPa. The microstructures were analyzed by transmission electron microscopy and atom probe tomography. The mechanism for the high strength was clarified in terms…
▽ More
An age-hardenable Al-Cu-Mg alloy (A2024) was processed by high-pressure torsion (HPT) for producing an ultrafine-grained structure. The alloy was further aged for extra strengthening. The tensile strength then reached a value as high as ~1 GPa. The microstructures were analyzed by transmission electron microscopy and atom probe tomography. The mechanism for the high strength was clarified in terms of solid-solution hardening, cluster hardening, work hardening, dispersion hardening and grain boundary hardening. It is shown that the segregation of solute atoms at grain boundaries including subgrain boundaries plays a significant role for the enhancement of the tensile strength.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles
Authors:
Amandine Duchaussoy,
Xavier Sauvage,
Kaveh Edalati,
Zenji Horita,
Gilles Renou,
Alexis Deschamps,
Frédéric De Geuser
Abstract:
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from an intrinsic poor thermal stability. To overcome this drawback, an Al-2%Fe alloy has been selected because of the low solubility of Fe in Al and their highly po…
▽ More
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from an intrinsic poor thermal stability. To overcome this drawback, an Al-2%Fe alloy has been selected because of the low solubility of Fe in Al and their highly positive enthalpy of mixing leading to the formation of stable intermetallic particles. The two-phase alloy has been processed by severe plastic deformation to achieve simultaneously submicrometer Al grains and a uniform distribution of nanoscaled intermetallic particles. The influence of the level of deformation on the microstructure has been investigated thanks to transmission electron microscopy and atom probe tomography and it is shown that for the highest strain a partial dissolution of the metastable Al6Fe particle occurred leading to the formation of a Fe super saturated solid solution. The thermal stability, and especially the precipitation of particles from the ultrafine-grained solid solution and the way they pin grain boundaries has been investigated both from static annealing and in-situ transmission electron microscopy experiments. The correlation between microstructural features and microhardness has been established to identify the various strengthening contributions. Finally, it is 2 shown that ultrafine grained high purity Al with less than 0.01 at. % Fe in solid solution could preserve a grain size only 300nm after 1h at 250$^\circ$C.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena
Authors:
Xavier Sauvage,
Gerhard Wilde,
Sergiy Divinski,
Zenji Horita,
Ruslan Valiev
Abstract:
Grain boundaries in ultrafine grained (UFG) materials processed by severe plastic deformation (SPD) are often called "non-equilibrium" grain boundaries. Such boundaries are characterized by excess grain boundary energy, presence of long range elastic stresses and enhanced free volumes. These features and related phenomena (diffusion, segregation, etc.) have been the object of intense studies and t…
▽ More
Grain boundaries in ultrafine grained (UFG) materials processed by severe plastic deformation (SPD) are often called "non-equilibrium" grain boundaries. Such boundaries are characterized by excess grain boundary energy, presence of long range elastic stresses and enhanced free volumes. These features and related phenomena (diffusion, segregation, etc.) have been the object of intense studies and the obtained results provide convincing evidence of the importance of a non-equilibrium state of high angle grain boundaries for UFG materials with unusual properties. The aims of the present paper are first to give a short overview of this research field and then to consider tangled, yet unclear issues and outline the ways of oncoming studies. A special emphasis is given on the specific structure of grain boundaries in ultrafine grained materials processed by SPD, on grain boundary segregation, on interfacial mixing linked to heterophase boundaries and on grain boundary diffusion. The connection between these unique features and the mechanical properties or the thermal stability of the ultrafine grained alloys is also discussed.
△ Less
Submitted 29 March, 2012;
originally announced March 2012.
