-
Thermostatting of Active Hamiltonian Systems via Symplectic Algorithms
Authors:
Antik Bhattacharya,
Jürgen Horbach,
Smarajit Karmakar
Abstract:
We consider a class of non-standard, two-dimensional (2D) Hamiltonian models that may show features of active particle dynamics, and therefore, we refer to these models as active Hamiltonian (AH) systems. The idea is to consider a spin fluid where -- on top of spin-spin and particle-particle interactions -- spins are coupled to the particle's velocities via a vector potential. Continuous spin vari…
▽ More
We consider a class of non-standard, two-dimensional (2D) Hamiltonian models that may show features of active particle dynamics, and therefore, we refer to these models as active Hamiltonian (AH) systems. The idea is to consider a spin fluid where -- on top of spin-spin and particle-particle interactions -- spins are coupled to the particle's velocities via a vector potential. Continuous spin variables interact with each other as in a standard $XY$ model. Typically, the AH models exhibit non-standard thermodynamic properties (e.g., for temperature and pressure) and equations of motion with non-standard forces. This implies that the derivation of symplectic algorithms to solve Hamilton's equations of motion numerically, as well as the thermostatting for these systems, is not straightforward. Here, we derive a symplectic integration scheme and propose a Nosé-Poincaré thermostat, providing a correct sampling in the canonical ensemble. The expressions for AH systems that we find for temperature and pressure might have parallels with the ongoing debate about the definition of pressure and the equation of state in active matter systems. For a specific AH model, recently proposed by Casiulis et al. [Phys. Rev. Lett. {\bf 124}, 198001 (2020)], we rationalize the symplectic algorithm and the proposed thermostatting, and investigate the transition from a fluid at high temperature to a cluster phase at low temperature where, due to the coupling of velocities and spins, the cluster phase shows a collective motion that is reminiscent to that observed in a variety of active systems.
△ Less
Submitted 23 September, 2024;
originally announced September 2024.
-
On the growing length scale in a replica-coupled glassforming liquid
Authors:
Niklas Küchler,
Jürgen Horbach
Abstract:
Computer simulations are used to study a three-dimensional polydisperse model glassformer in a replica-coupling setup where an attractive field $\propto - \varepsilon Q$ of strength $\varepsilon$ can adjust the similarity of the system to a fixed reference configuration with the overlap parameter $Q$. The polydispersity in the model enables the efficient use of swap Monte Carlo in combination with…
▽ More
Computer simulations are used to study a three-dimensional polydisperse model glassformer in a replica-coupling setup where an attractive field $\propto - \varepsilon Q$ of strength $\varepsilon$ can adjust the similarity of the system to a fixed reference configuration with the overlap parameter $Q$. The polydispersity in the model enables the efficient use of swap Monte Carlo in combination with molecular-dynamics simulation from which we obtain fully equilibrated liquid configurations at very low temperature, i.e., far below the critical temperature of mode-coupling theory, $T_{\rm MCT}$. When the $\varepsilon$-field is switched on, the fast dynamics with swaps allow relaxation to the stationary state at temperatures below $T_{\rm MCT}$. In the stationary state, the overlap $Q$ has a finite value that increases with increasing $\varepsilon$. For a given temperature $T$, fluctuations of the overlap around the average value become maximal at a critical field strength $\varepsilon^\star(T)$. With decreasing $T$ along this $\varepsilon^\star(T)$-line, overlap fluctuations increase and a transition from a unimodal overlap distribution to a bimodal shape occurs. We give evidence that these bimodal distributions are not due to first-order phase transitions. However, they reflect finite-size effects due to a rapidly growing length scale with decreasing temperature. We discuss the significance of this length scale for the understanding of the glass transition.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Understanding the swap Monte Carlo algorithm in a size-polydisperse model glassformer
Authors:
Niklas Küchler,
Jürgen Horbach
Abstract:
The dynamics of a polydisperse model glassformer are investigated by augmenting molecular dynamics (MD) simulation with swap Monte Carlo (SMC). Three variants of the SMC algorithm are analyzed with regard to convergence and performance. We elucidate the microscopic mechanism responsible for the drastic speed-up of structural relaxation at low temperature. It manifests in a stepwise increase of the…
▽ More
The dynamics of a polydisperse model glassformer are investigated by augmenting molecular dynamics (MD) simulation with swap Monte Carlo (SMC). Three variants of the SMC algorithm are analyzed with regard to convergence and performance. We elucidate the microscopic mechanism responsible for the drastic speed-up of structural relaxation at low temperature. It manifests in a stepwise increase of the mean squared displacement when the time scale between the application of swap sweeps is significantly larger than a characteristic microscopic time scale. Compared to Newtonian dynamics, with the hybrid MD-SMC dynamics the glass transition shifts to a lower temperature and a different temperature dependence of the localization length is found.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
On the choice of diameters in a polydisperse model glassformer: deterministic or stochastic?
Authors:
Niklas Küchler,
Jürgen Horbach
Abstract:
In particle-based computer simulations of polydisperse glassforming systems, the particle diameters $σ= σ_1, \dots, σ_N$ of a system with $N$ particles are chosen with the intention to approximate a desired distribution density $f$ with the corresponding histogram. One method to accomplish this is to draw each diameter randomly from the density $f$. We refer to this stochastic scheme as model…
▽ More
In particle-based computer simulations of polydisperse glassforming systems, the particle diameters $σ= σ_1, \dots, σ_N$ of a system with $N$ particles are chosen with the intention to approximate a desired distribution density $f$ with the corresponding histogram. One method to accomplish this is to draw each diameter randomly from the density $f$. We refer to this stochastic scheme as model $\mathcal{S}$. Alternatively, one can apply a deterministic method, assigning an appropriate set of $N$ values to the diameters. We refer to this method as model $\mathcal{D}$. We show that especially for the glassy dynamics at low temperatures it matters whether one chooses model $\mathcal{S}$ or model $\mathcal{D}$. Using molecular dynamics computer simulation, we investigate a three-dimensional polydisperse non-additive soft-sphere system with $f(s) \sim s^{-3}$. The Swap Monte Carlo method is employed to obtain equilibrated samples at very low temperatures. We show that for model $\mathcal{S}$ the sample-to-sample fluctuations due to the quenched disorder imposed by the diameters $σ$ can be explained by an effective packing fraction. Dynamic susceptibilities in model $\mathcal{S}$ can be split into two terms: One that is of thermal nature and can be identified with the susceptibility of model $\mathcal{D}$, and another one originating from the disorder in $σ$. At low temperatures the latter contribution is the dominating term in the dynamic susceptibility.
△ Less
Submitted 30 September, 2022;
originally announced September 2022.
-
The Origin of Deformation Induced Topological Anisotropy in Silica Glass
Authors:
Sudheer Ganisetti,
Achraf Atila,
Julien Guénolé,
Aruna Prakash,
Jürgen Horbach,
Lothar Wondraczek,
Erik Bitzek
Abstract:
Oxide glasses with a network structure are omnipresent in daily life. Often, they are regarded as isotropic materials; however, structural anisotropy can be induced through processing in mechanical fields and leads to unique materials properties. Unfortunately, due to the lack of local, atomic-scale analysis methods, the microscopic mechanisms leading to anisotropy remained elusive. Using novel an…
▽ More
Oxide glasses with a network structure are omnipresent in daily life. Often, they are regarded as isotropic materials; however, structural anisotropy can be induced through processing in mechanical fields and leads to unique materials properties. Unfortunately, due to the lack of local, atomic-scale analysis methods, the microscopic mechanisms leading to anisotropy remained elusive. Using novel analysis methods on glasses generated by molecular dynamics simulations, this paper provides a microscopic understanding of topological anisotropy in silica (SiO$_2$) glass under mechanical loads. The anisotropy observed in silica glass originates from a preferred orientation of SiO$_4$ tetrahedra at both short- and medium-range levels that can be controlled via the mode of mechanical loading. The findings elucidate the relation between the deformation protocol and the resulting anisotropic structure of the silica network (involving both persistent and transient effects), and thus provide important insight for the design of oxide glasses with tailored materials properties.
△ Less
Submitted 26 June, 2023; v1 submitted 7 June, 2022;
originally announced June 2022.
-
Brittle yielding in supercooled liquids below the critical temperature of mode coupling theory
Authors:
Konstantin Lamp,
Niklas Küchler,
Jürgen Horbach
Abstract:
Molecular Dynamics (MD) computer simulations of a polydisperse soft-sphere model under shear are presented. Starting point for these simulations are deeply supercooled samples far below the critical temperature, $T_c$, of mode coupling theory. These samples are fully equilibrated with the aid of the swap Monte Carlo technique. For states below $T_c$, we identify a life time $τ_{\rm lt}$ that measu…
▽ More
Molecular Dynamics (MD) computer simulations of a polydisperse soft-sphere model under shear are presented. Starting point for these simulations are deeply supercooled samples far below the critical temperature, $T_c$, of mode coupling theory. These samples are fully equilibrated with the aid of the swap Monte Carlo technique. For states below $T_c$, we identify a life time $τ_{\rm lt}$ that measures the time scale on which the system can be considered as an amorphous solid. The temperature dependence of $τ_{\rm lt}$ can be well described by an Arrhenius law. The existence of transient amorphous solid states below $T_c$ is associated with the possibility of brittle yielding, as manifested by a sharp stress drop in the stress-strain relation and shear banding. We show that brittle yielding requires on the one hand low shear rates and on the other hand, the time scale corresponding to the inverse shear rate has to be smaller or of the order of $τ_{\rm lt}$. Both conditions can be only met for large life time $τ_{\rm lt}$, i.e.~for states far below $T_c$.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Rheological response of a glass-forming liquid having large bidispersity
Authors:
Vinay Vaibhav,
Jürgen Horbach,
Pinaki Chaudhuri
Abstract:
Using extensive numerical simulations, we investigate the flow behaviour of a model glass-forming binary mixture whose constituent particles have a large size ratio. The rheological response to applied shear is studied in the regime where the larger species are spatially predominant. We demonstrate that the macroscopic rigidity that emerges with increasing density occurs in the regime where the la…
▽ More
Using extensive numerical simulations, we investigate the flow behaviour of a model glass-forming binary mixture whose constituent particles have a large size ratio. The rheological response to applied shear is studied in the regime where the larger species are spatially predominant. We demonstrate that the macroscopic rigidity that emerges with increasing density occurs in the regime where the larger species undergo a glass transition while the smaller species continue to be highly diffusive. We analyse the interplay between the timescale imposed by the shear and the quiescent relaxation dynamics of the two species to provide a microscopic insight into the observed rheological response. Finally, by tuning the composition of the mixture, we illustrate that the systematic insertion of the smaller particles affects the rheology by lowering of viscosity of the system.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Finite-size effects in the diffusion dynamics of a glass-forming binary mixture with large size ratio
Authors:
Vinay Vaibhav,
Jürgen Horbach,
Pinaki Chaudhuri
Abstract:
Extensive molecular dynamics (MD) computer simulations of an equimolar glass-forming AB mixture with large size ratio are presented. While the large A particles show a glass transition around the critical density of mode coupling theory $ρ_c$, the small B particles remain mobile with a relatively weak decrease of their self diffusion coefficient $D_{\rm B}$ with increasing density. Surprisingly, a…
▽ More
Extensive molecular dynamics (MD) computer simulations of an equimolar glass-forming AB mixture with large size ratio are presented. While the large A particles show a glass transition around the critical density of mode coupling theory $ρ_c$, the small B particles remain mobile with a relatively weak decrease of their self diffusion coefficient $D_{\rm B}$ with increasing density. Surprisingly, around $ρ_c$, the self-diffusion coefficient of the A particles, $D_{\rm A}$, also starts to follow a rather weak dependence on density. We show that this is due to finite-size effects that can be understood from the analysis of the collective interdiffusion dynamics.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Interatomic machine learning potentials for aluminium: application to solidification phenomena
Authors:
Noel Jakse,
Johannes Sandberg,
Leon F. Granz,
Anthony Saliou,
Philippe Jarry,
Emilie Devijver,
Thomas Voigtmann,
Jürgen Horbach,
Andreas Meyer
Abstract:
In studying solidification process by simulations on the atomic scale, the modeling of crystal nucleation or amorphisation requires the construction of interatomic interactions that are able to reproduce the properties of both the solid and the liquid states. Taking into account rare nucleation events or structural relaxation under deep undercooling conditions requires much larger length scales an…
▽ More
In studying solidification process by simulations on the atomic scale, the modeling of crystal nucleation or amorphisation requires the construction of interatomic interactions that are able to reproduce the properties of both the solid and the liquid states. Taking into account rare nucleation events or structural relaxation under deep undercooling conditions requires much larger length scales and longer time scales than those achievable by \textit{ab initio} molecular dynamics (AIMD). This problem is addressed by means of classical MD simulations using a well established high dimensional neural network potential trained on a relevant set of configurations generated by AIMD. Our dataset contains various crystalline structures and liquid states at different pressures, including their time fluctuations in a wide range of temperatures considering only their energy labels. Applied to elemental aluminium, the resulting potential is shown to be efficient to reproduce the basic structural, dynamics and thermodynamic quantities in the liquid and undercooled states without the need to include neither explicitly the forces nor all kind of configurations in the training procedure. The early stage of crystallization is further investigated on a much larger scale with one million atoms, allowing us to unravel features of the homogeneous nucleation mechanisms in the fcc phase at ambient pressure as well as in the bcc phase at high pressure with unprecedented accuracy close to the \textit{ab initio} one. In both case, a single step nucleation process is observed.
△ Less
Submitted 5 August, 2022; v1 submitted 4 January, 2022;
originally announced January 2022.
-
Wrinkles, folds and ripplocations: unusual deformation structures of confined elastic sheets at non-zero temperatures
Authors:
Debankur Das,
Jürgen Horbach,
Peter Sollich,
Tanusri Saha-Dasgupta,
Surajit Sengupta
Abstract:
We study the deformation of a fluctuating crystalline sheet confined between two flat rigid walls as a simple model for layered solids where bonds among atoms {\it within} the same layer are much stronger than those {\it between} layers. When subjected to sufficiently high loads in an appropriate geometry, these solids deform and fail in unconventional ways. Recent experiments suggest that configu…
▽ More
We study the deformation of a fluctuating crystalline sheet confined between two flat rigid walls as a simple model for layered solids where bonds among atoms {\it within} the same layer are much stronger than those {\it between} layers. When subjected to sufficiently high loads in an appropriate geometry, these solids deform and fail in unconventional ways. Recent experiments suggest that configurations named {\it ripplocations}, where a layer folds backwards over itself, are involved. These structures are distinct and separated by large free energy barriers from smooth {\it ripples} of the atomic layers that are always present at any non-zero temperature. We use Monte Carlo simulation in combination with an umbrella sampling technique to obtain conditions under which such structures form and study their specific experimental signatures.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Flow heterogeneities in supercooled liquids and glasses under shear
Authors:
Mehrdad Golkia,
Gaurav P. Shrivastav,
Pinaki Chaudhuri,
Jürgen Horbach
Abstract:
Using extensive non-equilibrium molecular dynamics simulations, we investigate a glassforming binary Lennard-Jones mixture under shear. Both supercooled liquids and glasses are considered. Our focus is on the characterization of inhomogeneous flow patterns such as shear bands that appear as a transient response to the external shear. For the supercooled liquids, we analyze the crossover from Newto…
▽ More
Using extensive non-equilibrium molecular dynamics simulations, we investigate a glassforming binary Lennard-Jones mixture under shear. Both supercooled liquids and glasses are considered. Our focus is on the characterization of inhomogeneous flow patterns such as shear bands that appear as a transient response to the external shear. For the supercooled liquids, we analyze the crossover from Newtonian to non-Newtonian behavior with increasing shear rate $\dotγ$. Above a critical shear rate $\dotγ_c$ where a non-Newtonian response sets in, the transient dynamics are associated with the occurrence of short-lived vertical shear bands, i.e. bands of high mobility that form perpendicular to the flow direction. In the glass states, long-lived horizontal shear bands, i.e. bands of high mobility parallel to the flow direction, are observed in addition to vertical ones. The systems with shear bands are characterized in terms of mobility maps, stress-strain relations, mean-squared displacements, and (local) potential energies. The initial formation of a horizontal shear band provides an efficient stress release, corresponds to a local minimum of the potential energy, and is followed by a slow broadening of the band towards the homogeneously flowing fluid in the steady-state. Whether a horizontal or a vertical shear band forms cannot be predicted from the initial undeformed sample. Furthermore, we show that with increasing system size the probability for the occurrence of horizontal shear bands increases.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
A nucleation theory for yielding of nearly defect-free crystals: understanding rate dependent yield points
Authors:
Vikranth Sagar Reddy,
Parswa Nath,
Jürgen Horbach,
Peter Sollich,
Surajit Sengupta
Abstract:
Experiments and simulations show that when an initially defect free rigid crystal is subjected to deformation at a constant rate, irreversible plastic flow commences at the so-called {\em yield point}. The yield point is a weak function of the deformation rate, which is usually expressed as a power law with an extremely small non-universal exponent. We re-analyze a representative set of published…
▽ More
Experiments and simulations show that when an initially defect free rigid crystal is subjected to deformation at a constant rate, irreversible plastic flow commences at the so-called {\em yield point}. The yield point is a weak function of the deformation rate, which is usually expressed as a power law with an extremely small non-universal exponent. We re-analyze a representative set of published data on nanometer sized, mostly defect free, Cu, Ni and Au crystals in the light of a recently proposed theory of yielding based on nucleation of stable stress-free regions inside the metastable rigid solid. The single relation derived here, which is {\em not} a power law, explains data covering {\em fifteen} orders of magnitude in time scales.
△ Less
Submitted 23 December, 2019; v1 submitted 23 August, 2019;
originally announced August 2019.
-
Geometry-controlled Failure Mechanisms of Amorphous Solids on the Nanoscale
Authors:
Kallol Paul,
Ratul Dasgupta,
Jürgen Horbach,
Smarajit Karmakar
Abstract:
Amorphous solids, confined on the nano-scale, exhibit a wealth of novel phenomena yet to be explored. In particular, the response of such solids to a mechanical load is not well understood and, as has been demonstrated experimentally, it differs strongly from bulk samples made of the same materials. Failure patterns and mechanisms are strongly affected by the geometry of the confinement and the in…
▽ More
Amorphous solids, confined on the nano-scale, exhibit a wealth of novel phenomena yet to be explored. In particular, the response of such solids to a mechanical load is not well understood and, as has been demonstrated experimentally, it differs strongly from bulk samples made of the same materials. Failure patterns and mechanisms are strongly affected by the geometry of the confinement and the interplay between interfacial effects in the sample and the time scale, imposed by an external mechanical field. Here, we present the mechanism of cavity formation in a confined model glass, subjected to expansion with a constant strain rate. This system is studied for varying geometric aspect ratio and sample size. Our results show that for a given temperature and straining condition, the sample shows cavitation when the aspect ratio reaches a critical value and below this aspect ratio the sample breaks by forming a neck. The critical aspect ratio is associated with a critical curvature of the neck that depends on strain rate and temperature. If this critical curvature is exceeded, the free energy of the system is minimized by the formation of a cavity. Our study reveals a novel mechanism of cavity formation on the nanoscale. This is probably a generic mechanism for material's failure in small confined systems under mechanical load.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
The free energy of grain boundaries from atomistic computer simulation
Authors:
Saswati Ganguly,
Jürgen Horbach
Abstract:
A novel thermodynamic integration (TI) scheme is presented that allows computing the free energy of grain boundaries (GBs) in crystals from atomistic computer simulation. Unlike previous approaches, the method can be applied at arbitrary temperatures and allows for a systematic extrapolation to the thermodynamic limit. It is applied to a $\Sigma11$ GB in a face centered cubic (FCC) Lennard-Jones c…
▽ More
A novel thermodynamic integration (TI) scheme is presented that allows computing the free energy of grain boundaries (GBs) in crystals from atomistic computer simulation. Unlike previous approaches, the method can be applied at arbitrary temperatures and allows for a systematic extrapolation to the thermodynamic limit. It is applied to a $\Sigma11$ GB in a face centered cubic (FCC) Lennard-Jones crystal. At a constant density, the GB free energy shows a non-monotonic temperature dependence with a maximum at about half the melting temperature and the GB changes from a rigid to a rough interface with distinct finite size scaling above this temperature.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Precursors of fluidisation in the creep response of a soft glass
Authors:
Raffaela Cabriolu,
Jürgen Horbach,
Pinaki Chaudhuri,
Kirsten Martens
Abstract:
Using extensive numerical simulations, we study the fluidisation process of dense amorphous materials subjected to an external shear stress, using a three-dimensional colloidal glass model. In order to disentangle possible boundary effects from finite size effects in the process of fluidisation, we implement a novel geometry-constrained protocol with periodic boundary conditions. We show that this…
▽ More
Using extensive numerical simulations, we study the fluidisation process of dense amorphous materials subjected to an external shear stress, using a three-dimensional colloidal glass model. In order to disentangle possible boundary effects from finite size effects in the process of fluidisation, we implement a novel geometry-constrained protocol with periodic boundary conditions. We show that this protocol is well controlled and that the longtime fluidisation dynamics is, to a great extent, independent of the details of the protocol parameters. Our protocol, therefore, provides an ideal tool to investigate the bulk dynamics prior to yielding and to study finite size effects regarding the fluidisation process. Our study reveals the existence of precursors to fluidisation observed as a peak in the strain-rate fluctuations, that allows for a robust definition of a fluidisation time. Although the exponents in the power-law creep dynamics seem not to depend significantly on the system size, we reveal strong finite size effects for the onset of fluidisation.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Plastic deformation of a permanently bonded network: stress relaxation by pleats
Authors:
Saswati Ganguly,
Debankur Das,
Jürgen Horbach,
Peter Sollich,
Smarajit Karmakar,
Surajit Sengupta
Abstract:
We show that a flat two dimensional network of connected vertices, when stretched, may deform plastically by producing `pleats'; system spanning linear structures with width comparable to the lattice spacing, where the network overlaps on itself. To understand the pleating process, we introduce an external field that couples to local {\em non-affine} displacements, i.e. those displacements of neig…
▽ More
We show that a flat two dimensional network of connected vertices, when stretched, may deform plastically by producing `pleats'; system spanning linear structures with width comparable to the lattice spacing, where the network overlaps on itself. To understand the pleating process, we introduce an external field that couples to local {\em non-affine} displacements, i.e. those displacements of neighbouring vertices that cannot be represented as a local affine strain. We obtain both zero and finite temperature phase diagrams in the strain -- field plane. Pleats occur here as a result of an equilibrium first-order transition from the homogeneous network to a heterogeneous phase where stress is localised within pleats and eliminated elsewhere. We show that in the thermodynamic limit the un-pleated state is always metastable at vanishing field for infinitesimal strain. Plastic deformation of the initially homogeneous network is akin to the decay of a metastable phase via a dynamical transition. We make predictions concerning local stress distributions and thermal effects associated with pleats which may be observable in suitable experimental systems.
△ Less
Submitted 13 December, 2018; v1 submitted 14 March, 2018;
originally announced March 2018.
-
Do thermodynamically stable rigid solids exist?
Authors:
Parswa Nath,
Saswati Ganguly,
Jürgen Horbach,
Peter Sollich,
Smarajit Karmakar,
Surajit Sengupta
Abstract:
Customarily, crystalline solids are defined to be {\em rigid} since they resist changes of shape determined by their boundaries. However, rigid solids cannot exist in the thermodynamic limit where boundaries become irrelevant. Particles in the solid may rearrange to adjust to shape changes eliminating stress without destroying crystalline order. Rigidity is therefore valid only in the {\em metasta…
▽ More
Customarily, crystalline solids are defined to be {\em rigid} since they resist changes of shape determined by their boundaries. However, rigid solids cannot exist in the thermodynamic limit where boundaries become irrelevant. Particles in the solid may rearrange to adjust to shape changes eliminating stress without destroying crystalline order. Rigidity is therefore valid only in the {\em metastable} state that emerges because these particle rearrangements in response to a deformation, or strain, are associated with slow collective processes. Here, we show that a thermodynamic collective variable may be used to quantify particle rearrangements that occur as a solid is deformed at zero strain rate. Advanced Monte Carlo simulation techniques are then employed to obtain the equilibrium free energy as a function of this variable. Our results lead to a new view on rigidity: While at zero strain a rigid crystal coexists with one that responds to infinitesimal strain by rearranging particles and expelling stress, at finite strain the rigid crystal is metastable, associated with a free energy barrier that decreases with increasing strain. The rigid phase becomes thermodynamically stable by switching on an external field, which penalises particle rearrangements. This produces a line of first-order phase transitions in the field - strain plane that intersects the origin. Failure of a solid once strained beyond its elastic limit is associated with kinetic decay processes of the metastable rigid crystal deformed with a finite strain rate. These processes can be understood in quantitative detail using our computed phase diagram as reference.
△ Less
Submitted 5 March, 2018;
originally announced March 2018.
-
Crowding of interacting fluid particles in porous media through molecular dynamics: breakdown of universality for soft interactions
Authors:
Simon Kaspar Schnyder,
Jürgen Horbach
Abstract:
Molecular dynamics simulations of interacting soft disks confined in a heterogeneous quenched matrix of soft obstacles show dynamics which is fundamentally different from that of hard disks. The interactions between the disks can enhance transport when their density is increased, as disks cooperatively help each other over the finite energy barriers in the matrix. The system exhibits a transition…
▽ More
Molecular dynamics simulations of interacting soft disks confined in a heterogeneous quenched matrix of soft obstacles show dynamics which is fundamentally different from that of hard disks. The interactions between the disks can enhance transport when their density is increased, as disks cooperatively help each other over the finite energy barriers in the matrix. The system exhibits a transition from a diffusive to a localized state but the transition is strongly rounded. Effective exponents in the mean-squared displacement can be observed over three decades in time but depend on the density of the disks and do not correspond to asymptotic behavior in the vicinity of a critical point, thus showing that it is incorrect to relate them to the critical exponents in the Lorentz model scenario. The soft interactions are therefore responsible for a breakdown of the universality of the dynamics.
△ Less
Submitted 12 February, 2018; v1 submitted 23 August, 2017;
originally announced August 2017.
-
Nonmonotonous classical magneto-conductivity of a two-dimensional electron gas in a disordered array of obstacles
Authors:
N. H. Siboni,
J. Schluck,
K. Pierz,
H. W. Schumacher,
D. Kazazis,
J. Horbach,
T. Heinzel
Abstract:
Magnetotransport measurements in combination with molecular dynamics (MD) simulations on two-dimensional disordered Lorentz gases in the classical regime are reported. In quantitative agreement between experiment and simulation, the magnetoconductivity displays a pronounced peak as a function of perpendicular magnetic field $B$ which cannot be explained in the framework of existing kinetic theorie…
▽ More
Magnetotransport measurements in combination with molecular dynamics (MD) simulations on two-dimensional disordered Lorentz gases in the classical regime are reported. In quantitative agreement between experiment and simulation, the magnetoconductivity displays a pronounced peak as a function of perpendicular magnetic field $B$ which cannot be explained in the framework of existing kinetic theories. We show that this peak is linked to the onset of a directed motion of the electrons along the contour of the disordered obstacle matrix when the cyclotron radius becomes smaller than the size of the obstacles. This directed motion leads to transient superdiffusive motion and strong scaling corrections in the vicinity of the insulator-to-conductor transitions of the Lorentz gas.
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
An Ising Model for Metal-Organic Frameworks
Authors:
Nicolas Höft,
Jürgen Horbach,
Victor Martin-Mayor,
Beatriz Seoane
Abstract:
We present a three-dimensional Ising model where lines of equal spins are frozen in such that they form an ordered framework structure. The frame spins impose an external field on the rest of the spins (active spins). We demonstrate that this "porous Ising model" can be seen as a minimal model for condensation transitions of gas molecules in metal-organic frameworks. Using Monte Carlo simulation t…
▽ More
We present a three-dimensional Ising model where lines of equal spins are frozen in such that they form an ordered framework structure. The frame spins impose an external field on the rest of the spins (active spins). We demonstrate that this "porous Ising model" can be seen as a minimal model for condensation transitions of gas molecules in metal-organic frameworks. Using Monte Carlo simulation techniques, we compare the phase behavior of a porous Ising model with that of a particle-based model for the condensation of methane (CH$_4$) in the isoreticular metal-organic framework IRMOF-16. For both models, we find a line of first-order phase transitions that end in a critical point. We show that the critical behavior in both cases belongs to the 3D Ising universality class, in contrast to other phase transitions in confinement such as capillary condensation.
△ Less
Submitted 11 April, 2017;
originally announced April 2017.
-
Heterogeneous dynamics during yielding of glasses: effect of aging
Authors:
Gaurav Prakash Shrivastav,
Pinaki Chaudhuri,
Jürgen Horbach
Abstract:
Molecular dynamics computer simulations of a binary Lennard-Jones glass under shear are presented. The mechanical response of glassy states having different thermal histories is investigated by imposing a wide range of external shear rates, at different temperatures. The stress-strain relations exhibit an overshoot at a strain of around 0.1, marking the yielding of the glass sample and the onset o…
▽ More
Molecular dynamics computer simulations of a binary Lennard-Jones glass under shear are presented. The mechanical response of glassy states having different thermal histories is investigated by imposing a wide range of external shear rates, at different temperatures. The stress-strain relations exhibit an overshoot at a strain of around 0.1, marking the yielding of the glass sample and the onset of plastic flow. The amplitude of the overshoot shows a logarithmic behavior with respect to a dimensionless variable, given by the age of the sample times the shear rate. Dynamical heterogeneities having finite lifetimes, in the form of shear bands, are observed as the glass deforms under shear. By quantifying the spatial fluctuations of particle mobility, we demonstrate that such shearbanding occurs only under specific combinations of imposed shear-rate, age of glass and ambient temperature.
△ Less
Submitted 2 December, 2016;
originally announced December 2016.
-
Equilibrium and dynamic pleating of a crystalline bonded network
Authors:
Saswati Ganguly,
Jürgen Horbach,
Peter Sollich,
Parswa Nath,
Smarajit Karmakar,
Surajit Sengupta
Abstract:
We describe a phase transition that gives rise to structurally non-trivial states in a two-dimensional ordered network of particles connected by harmonic bonds. Monte Carlo simulations reveal that the network supports, apart from the homogeneous phase, a number of heterogeneous "pleated" phases, which can be stabilised by an external field. This field is conjugate to a global collective variable q…
▽ More
We describe a phase transition that gives rise to structurally non-trivial states in a two-dimensional ordered network of particles connected by harmonic bonds. Monte Carlo simulations reveal that the network supports, apart from the homogeneous phase, a number of heterogeneous "pleated" phases, which can be stabilised by an external field. This field is conjugate to a global collective variable quantifying "non-affineness", i.e.~the deviation of local particle displacements from local affine deformation. In the pleated phase, stress is localised in ordered rows of pleats and eliminated from the rest of the lattice. The {\em kinetics} of the phase transition is unobservably slow in molecular dynamics simulation near coexistence, due to very large free energy barriers. When the external field is increased further to lower these barriers, the network exhibits rich dynamic behaviour: it transforms into a {\em metastable} phase with the stress now localised in a {\em disordered} arrangement of pleats. The pattern of pleats shows ageing dynamics and slow relaxation to equilibrium. Our predictions may be checked by experiments on tethered colloidal solids in dynamic laser traps.
△ Less
Submitted 2 December, 2016;
originally announced December 2016.
-
Dynamic heterogeneities and non-Gaussian behavior in two-dimensional randomly confined colloidal fluids
Authors:
Simon K. Schnyder,
Thomas O. E. Skinner,
Alice L. Thorneywork,
Dirk G. A. L. Aarts,
Jürgen Horbach,
Roel P. A. Dullens
Abstract:
A binary mixture of super-paramagnetic colloidal particles is confined between glass plates such that the large particles become fixed and provide a two-dimensional disordered matrix for the still mobile small particles, which form a fluid. By varying fluid and matrix area fractions and tuning the interactions between the super-paramagnetic particles via an external magnetic field, different regio…
▽ More
A binary mixture of super-paramagnetic colloidal particles is confined between glass plates such that the large particles become fixed and provide a two-dimensional disordered matrix for the still mobile small particles, which form a fluid. By varying fluid and matrix area fractions and tuning the interactions between the super-paramagnetic particles via an external magnetic field, different regions of the state diagram are explored. The mobile particles exhibit delocalized dynamics at small matrix area fractions and localised motion at high matrix area fractions, and the localization transition is rounded by the soft interactions [T. O. E. Skinner et al, Phys. Rev. Lett. {\bf 111}, 128301 (2013)]. Expanding on previous work, we find the dynamics of the tracers to be strongly heterogeneous and show that molecular dynamics simulations of an ideal gas confined in a fixed matrix exhibit similar behavior. The simulations show how these soft interactions make the dynamics more heterogenous compared to the disordered Lorentz gas and lead to strong non-Gaussian fluctuations.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Amorphization of a crystalline solid by plastic deformation
Authors:
Saswati Ganguly,
Juergen Horbach,
Peter Sollich,
Smarajit Karmakar,
Surajit Sengupta
Abstract:
We demonstrate that plastic deformation in solids is associated with a dynamic transition that is reminiscent to the transition from a superconducting to a mixed phase in Type II superconductors. We report analytic calculations, extensive molecular dynamics and sequential umbrella sampling Monte Carlo simulations of a two dimensional triangular crystalline solid undergoing plastic deformation unde…
▽ More
We demonstrate that plastic deformation in solids is associated with a dynamic transition that is reminiscent to the transition from a superconducting to a mixed phase in Type II superconductors. We report analytic calculations, extensive molecular dynamics and sequential umbrella sampling Monte Carlo simulations of a two dimensional triangular crystalline solid undergoing plastic deformation under strain. The solid consists of particles connected by harmonic springs. Non-affine displacement fluctuations of the solid are enhanced using an external field, causing a rich deformation behaviour. The external field leads to a mixed phase, where defect and stress-free crystallites are surrounded by a network of amorphous regions with large local internal stress --- a "stress Meissner" effect. The transition shows slow ageing dynamics caused by the presence of many competing, non-crystalline free-energy minima. Under uniform uniaxial strain, this amorphization transition gives rise to irreversible plastic deformation with the amorphous regions appearing as band-like structures. Our results may be checked by careful experiments on colloidal crystals using holographic optical tweezers.
△ Less
Submitted 5 December, 2016; v1 submitted 16 March, 2016;
originally announced March 2016.
-
Effective interaction potential for amorphous silica from ab initio simulations
Authors:
Antoine Carre,
Simona Ispas,
Jurgen Horbach,
Walter Kob
Abstract:
We discuss a novel approach that allows to obtain effective potentials from ab initio trajectories. Our method consists in fitting the weighted radial distribution functions obtained from the ab initio data with the ones obtained from simulations with the effective potential, and using the parameters of the latter as fitting variables. As a case study, we consider the example of amorphous silica,…
▽ More
We discuss a novel approach that allows to obtain effective potentials from ab initio trajectories. Our method consists in fitting the weighted radial distribution functions obtained from the ab initio data with the ones obtained from simulations with the effective potential, and using the parameters of the latter as fitting variables. As a case study, we consider the example of amorphous silica, a material that is highly relevant in the field of glass science as well as in geology. Our approach is able to obtain an effective potential that gives a better description with respect to structural and thermodynamic properties than the potential proposed by van Beest, Kramer, and van Santen, and that has been very frequently used as a model for amorphous silica. In parallel, we have also used the so-called "force matching" approach proposed by Ercolessi and Adams to obtain an effective potential. We demonstrate that for the case of silica this method does not yield a reliable potential and discuss the likely origin for this failure.
△ Less
Submitted 11 December, 2015;
originally announced December 2015.
-
Exploring structural inhomogeneities in glasses during cavitation
Authors:
Pinaki Chaudhuri,
Jürgen Horbach
Abstract:
Using large-scale molecular dynamics simulations for a system of $10^6$ particles, the response of a dense amorphous solid to the continuous expansion of its volume is investigated. We find that the spatially uniform glassy state becomes unstable via the formation of cavities, which eventually leads to failure. By scanning through a wide range of densities and temperatures, we determine the state…
▽ More
Using large-scale molecular dynamics simulations for a system of $10^6$ particles, the response of a dense amorphous solid to the continuous expansion of its volume is investigated. We find that the spatially uniform glassy state becomes unstable via the formation of cavities, which eventually leads to failure. By scanning through a wide range of densities and temperatures, we determine the state points at which the instability occurs and thereby provide estimates of the co-existence density of the resultant glass phase. Evidence for long-lived, inhomogeneous configurations with a negative pressure is found, where the frozen-in glass structure contains spherical cavities or a network of void space. Furthermore, we demonstrate the occurrence of hysteretic effects when the cavitated solid is compressed to regain the dense glassy state. As a result, a new glass state is obtained, the pressure of which is different from the initial one due to small density inhomogeneities that are generated by the dilation-compression cycle.
△ Less
Submitted 10 September, 2015;
originally announced September 2015.
-
Free energy cost of forming an interface between a crystal and its frozen version
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
Using a thermodynamic integration scheme, we compute the free energy cost per unit area, $γ$, of forming an interface between a crystal and a frozen structured wall, formed by particles frozen into the same equilibrium structure as the crystal. Even though the structure and potential energy of the crystalline phase in the vicinity of the wall is same as in the bulk, $γ$ has a non-zero value and in…
▽ More
Using a thermodynamic integration scheme, we compute the free energy cost per unit area, $γ$, of forming an interface between a crystal and a frozen structured wall, formed by particles frozen into the same equilibrium structure as the crystal. Even though the structure and potential energy of the crystalline phase in the vicinity of the wall is same as in the bulk, $γ$ has a non-zero value and increases with increasing density of the crystal and the wall. Investigating the effect of several interaction potentials between the particles, we observe a positive $γ$ at all crystalline densities if the potential is purely repulsive. For models with attractive interactions, such as the Lennard-Jones potential, a negative value for $γ$ is obtained at low densities.
△ Less
Submitted 13 July, 2015;
originally announced July 2015.
-
Creep and flow of glasses: strain response linked to the spatial distribution of dynamical heterogeneities
Authors:
T. Sentjabrskaja,
P. Chaudhuri,
M. Hermes,
W. C. K. Poon,
J. Horbach,
S. U. Egelhaaf,
M. Laurati
Abstract:
Mechanical properties are of central importance to materials sciences, in particular if they depend on external stimuli. Here we investigate the rheological response of amorphous solids, namely col- loidal glasses, to external forces. Using confocal microscopy and computer simulations, we establish a quantitative link between the macroscopic creep response and the microscopic single-particle dy- n…
▽ More
Mechanical properties are of central importance to materials sciences, in particular if they depend on external stimuli. Here we investigate the rheological response of amorphous solids, namely col- loidal glasses, to external forces. Using confocal microscopy and computer simulations, we establish a quantitative link between the macroscopic creep response and the microscopic single-particle dy- namics. We observe dynamical heterogeneities, namely regions of enhanced mobility, which remain localized in the creep regime, but grow for applied stresses leading to steady flow. These different behaviors are also reflected in the average particle dynamics, quantified by the mean squared dis- placement of the individual particles, and the fraction of active regions. Both microscopic quantities are found to be proportional to the macroscopic strain, despite the non-equilibrium and non-linear conditions during creep and the transient regime prior to steady flow.
△ Less
Submitted 10 July, 2015;
originally announced July 2015.
-
Formation and growth of shear bands in glasses: existence of an underlying directed percolation transition
Authors:
Gaurav Prakash Shrivastav,
Pinaki Chaudhuri,
Jürgen Horbach
Abstract:
The response of glasses to mechanical loading often leads to the formation of inhomogeneous flow patterns that strongly affect materials properties. Among them, shear bands are ubiquitous in a wide variety of materials, ranging from soft matter systems to metallic alloys. Shear banding is associated with strain localization, i.e. the deformation of the sheared glassy solid is localized in space in…
▽ More
The response of glasses to mechanical loading often leads to the formation of inhomogeneous flow patterns that strongly affect materials properties. Among them, shear bands are ubiquitous in a wide variety of materials, ranging from soft matter systems to metallic alloys. Shear banding is associated with strain localization, i.e. the deformation of the sheared glassy solid is localized in space in form of band-like structures. These structures are often precursors to catastrophic failure, implying that a proper understanding of the underlying mechanisms could lead to the design of smarter materials. However, despite its importance in material science, the microscopic origin of shear banding in glassy materials is only poorly understood. Here, the formation of shear banding in glassy systems is revealed by non-equilibrium molecular dynamics simulations (NEMD) of a binary Lennard-Jones mixture, subject to a constant strain rate. In its glass state, this system exhibits for all considered strain rates the formation of a percolating cluster of mobile regions at a critical strain. We show that this percolation transition belongs to the universality class of directed percolation. Only at low shear rates, where the steady-state stress is close to the yielding threshold, the percolating cluster evolves into a transient (but long-lived) shear band with a diffusive growth of its width.
△ Less
Submitted 23 June, 2015; v1 submitted 9 June, 2015;
originally announced June 2015.
-
Shear band relaxation in a deformed bulk metallic glass
Authors:
I. Binkowski,
G. P. Shrivastav,
J. Horbach,
S. V. Divinski,
G. Wilde
Abstract:
Relaxation of shear bands in a Pd40Ni40P20 bulk metallic glass was investigated by a combination of radiotracer diffusion and molecular dynamics (MD) simulations, allowing to determine for the first time the effective activation enthalpy of diffusion along shear bands in a deformed glass. The shear bands relax during annealing below the glass transition temperature and the diffusion enhancement re…
▽ More
Relaxation of shear bands in a Pd40Ni40P20 bulk metallic glass was investigated by a combination of radiotracer diffusion and molecular dynamics (MD) simulations, allowing to determine for the first time the effective activation enthalpy of diffusion along shear bands in a deformed glass. The shear bands relax during annealing below the glass transition temperature and the diffusion enhancement reveals unexpectedly a non-monotonous behavior. The development of shear bands and the subsequent relaxation of stresses after switching off the shearing are characterized on microscopic to mesoscopic length scales by MD simulation subjecting the model glass to a constant strain rate. Mean-squared displacements as well as strain maps indicate that the heterogeneity, as manifested by shear bands in the systems under shear, persist after the shear is switched off. We observe a further relaxation of residual stresses that remain localized in regions where the shear band has been present before, although the system is - different from the macroscopic experiment - homogeneous with respect to the local density. These results indicate that even on a local scale one may expect strong dynamic heterogeneity in deformed glassy solids due to shear banding. The results thus suggest that plastically deformed metallic glasses present poly-amorphous systems that necessitate descriptions that are analogous to multiphase materials including the presence of heterophase interfaces.
△ Less
Submitted 14 September, 2015; v1 submitted 9 June, 2015;
originally announced June 2015.
-
Crystal growth kinetics in Lennard-Jones and Weeks-Chandler-Andersen systems along the solid-liquid coexistence line
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
Kinetics of crystal-growth is investigated along the solid-liquid coexistence line for the (100), (110) and (111) orientations of the Lennard-Jones and Weeks-Chandler-Andersen fcc crystal-liquid interface, using non-equilibrium molecular dynamics simulations. A slowing down of the growth kinetics along the coexistence line is observed, which is mostly a temperature effect, with other quantities su…
▽ More
Kinetics of crystal-growth is investigated along the solid-liquid coexistence line for the (100), (110) and (111) orientations of the Lennard-Jones and Weeks-Chandler-Andersen fcc crystal-liquid interface, using non-equilibrium molecular dynamics simulations. A slowing down of the growth kinetics along the coexistence line is observed, which is mostly a temperature effect, with other quantities such as the melting pressure and liquid self-diffusion coefficient having a negligible impact. The growth kinetics of the two potentials become similar at large values of the melting temperature and pressure, when both resemble a purely repulsive soft-sphere potential. Classical models of crystallization from the melt are in reasonable qualitative agreement with our simulation data. Finally, several one-phase empirical melting/freezing rules are studied with respect to their validity along the coexistence line.
△ Less
Submitted 28 April, 2015;
originally announced April 2015.
-
Rounding of the localization transition in model porous media
Authors:
Simon K. Schnyder,
Markus Spanner,
Felix Höfling,
Thomas Franosch,
Jürgen Horbach
Abstract:
The generic mechanisms of anomalous transport in porous media are investigated by computer simulations of two-dimensional model systems. In order to bridge the gap between the strongly idealized Lorentz model and realistic models of porous media, two models of increasing complexity are considered: a cherry-pit model with hard-core correlations as well as a soft-potential model. An ideal gas of tra…
▽ More
The generic mechanisms of anomalous transport in porous media are investigated by computer simulations of two-dimensional model systems. In order to bridge the gap between the strongly idealized Lorentz model and realistic models of porous media, two models of increasing complexity are considered: a cherry-pit model with hard-core correlations as well as a soft-potential model. An ideal gas of tracer particles inserted into these structures is found to exhibit anomalous transport which extends up to several decades in time. Also, the self-diffusion of the tracers becomes suppressed upon increasing the density of the systems. These phenomena are attributed to an underlying percolation transition. In the soft potential model the transition is rounded, since each tracer encounters its own critical density according to its energy. Therefore, the rounding of the transition is a generic occurrence in realistic, soft systems.
△ Less
Submitted 7 November, 2014;
originally announced November 2014.
-
Liquid pair correlations in four spatial dimensions: Theory versus simulation
Authors:
M. Heinen,
J. Horbach,
H. Löwen
Abstract:
Using liquid integral equation theory, we calculate the pair correlations of particles that interact via a smooth repulsive pair potential in d = 4 spatial dimensions. We discuss the performance of different closures for the Ornstein-Zernike equation, by comparing the results to computer simulation data. Our results are of relevance to understand crystal and glass formation in high-dimensional sys…
▽ More
Using liquid integral equation theory, we calculate the pair correlations of particles that interact via a smooth repulsive pair potential in d = 4 spatial dimensions. We discuss the performance of different closures for the Ornstein-Zernike equation, by comparing the results to computer simulation data. Our results are of relevance to understand crystal and glass formation in high-dimensional systems.
△ Less
Submitted 6 November, 2014;
originally announced November 2014.
-
Crystal-liquid interfacial free energy of hard spheres via a novel thermodynamic integration scheme
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
The hard sphere crystal-liquid interfacial free energy, ($γ_{\rm cl}$), is determined from molecular dynamics simulations using a novel thermodynamic integration (TI) scheme. The advantage of this TI scheme compared to previous methods is to successfully circumvent hysteresis effects due to the movement of the crystal-liquid interface. This is accomplished by the use of extremely short-ranged and…
▽ More
The hard sphere crystal-liquid interfacial free energy, ($γ_{\rm cl}$), is determined from molecular dynamics simulations using a novel thermodynamic integration (TI) scheme. The advantage of this TI scheme compared to previous methods is to successfully circumvent hysteresis effects due to the movement of the crystal-liquid interface. This is accomplished by the use of extremely short-ranged and impenetrable Gaussian flat walls which prevent the drift of the interface while imposing a negligible free-energy penalty. We find that it is crucial to analyze finite-size effects in order to obtain reliable estimates of $γ_{\rm cl}$ in the thermodynamic limit.
△ Less
Submitted 31 October, 2014;
originally announced October 2014.
-
Poiseuille flow of soft glasses in narrow channels: From quiescence to steady state
Authors:
Pinaki Chaudhuri,
Jürgen Horbach
Abstract:
Using numerical simulations, the onset of Poiseuille flow in a confined soft glass is investigated. Starting from the quiescent state, steady flow sets in at a time scale which increases with a decrease in applied forcing. At this onset time scale, a rapid transition occurs via the simultaneous fluidization of regions having different local stresses. In the absence of steady flow at long times, cr…
▽ More
Using numerical simulations, the onset of Poiseuille flow in a confined soft glass is investigated. Starting from the quiescent state, steady flow sets in at a time scale which increases with a decrease in applied forcing. At this onset time scale, a rapid transition occurs via the simultaneous fluidization of regions having different local stresses. In the absence of steady flow at long times, creep is observed even in regions where the local stress is larger than the bulk yielding threshold. Finally, we show that the time scale to attain steady flow depends strongly on the history of the initial state.
△ Less
Submitted 26 October, 2014;
originally announced October 2014.
-
Excess free energy of supercooled liquids at disordered walls
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
Using a novel thermodynamic integration scheme, we compute the excess free energy, $γ$, of a glass-forming, binary Lennard-Jones liquid in contact with a frozen amorphous wall, formed by particles frozen into a similar structure as the liquid. We find that $γ$ is non-zero, becoming negative at low temperature. This indicates that the thermodynamics of the system is perturbed by the effect of the a…
▽ More
Using a novel thermodynamic integration scheme, we compute the excess free energy, $γ$, of a glass-forming, binary Lennard-Jones liquid in contact with a frozen amorphous wall, formed by particles frozen into a similar structure as the liquid. We find that $γ$ is non-zero, becoming negative at low temperature. This indicates that the thermodynamics of the system is perturbed by the effect of the amorphous wall.
△ Less
Submitted 27 October, 2014; v1 submitted 20 October, 2014;
originally announced October 2014.
-
Diffusion and Interdiffusion in Binary Metallic Melts
Authors:
P. Kuhn,
J. Horbach,
F. Kargl,
A. Meyer,
Th. Voigtmann
Abstract:
We discuss the dependence of self- and interdiffusion coefficients on temperature and composition for two prototypical binary metallic melts, Al-Ni and Zr-Ni, in molecular-dynamics (MD) computer simulations and the mode-coupling theory of the glass transition (MCT). Dynamical processes that are mainly entropic in origin slow down mass transport (as expressed through self diffusion) in the mixture…
▽ More
We discuss the dependence of self- and interdiffusion coefficients on temperature and composition for two prototypical binary metallic melts, Al-Ni and Zr-Ni, in molecular-dynamics (MD) computer simulations and the mode-coupling theory of the glass transition (MCT). Dynamical processes that are mainly entropic in origin slow down mass transport (as expressed through self diffusion) in the mixture as compared to the ideal-mixing contribution. Interdiffusion of chemical species is a competition of slow kinetic modes with a strong thermodynamic driving force that is caused by non-entropic interactions. The combination of both dynamic and thermodynamic effects causes qualitative differences in the concentration dependence of self-diffusion and interdiffusion coefficients. At high temperatures, the thermodynamic enhancement of interdiffusion prevails, while at low temperatures, kinetic effects dominate the concentration dependence, rationalized within MCT as the approach to its ideal-glass transition temperature $T_c$. The Darken equation relating self- and interdiffusion qualitatively reproduces the concentration-dependence in both Zr-Ni and Al-Ni, but quantitatively, the kinetic contributions to interdiffusion can be slower than the lower bound suggested by the Darken equation. As temperature is decreased, the agreement with Darken's equation improves, due to a strong coupling of all kinetic modes that is a generic feature predicted by MCT.
△ Less
Submitted 9 August, 2014;
originally announced August 2014.
-
Crystal-liquid interfacial free energy via thermodynamic integration
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
A novel thermodynamic integration (TI) scheme is presented to compute the crystal-liquid interfacial free energy ($γ_{\rm cl}$) from molecular dynamics simulation. The scheme is applied to a Lennard-Jones system. By using extremely short-ranged and impenetrable Gaussian flat walls to confine the liquid and crystal phases, we overcome hysteresis problems of previous TI schemes that stem from the tr…
▽ More
A novel thermodynamic integration (TI) scheme is presented to compute the crystal-liquid interfacial free energy ($γ_{\rm cl}$) from molecular dynamics simulation. The scheme is applied to a Lennard-Jones system. By using extremely short-ranged and impenetrable Gaussian flat walls to confine the liquid and crystal phases, we overcome hysteresis problems of previous TI schemes that stem from the translational movement of the crystal-liquid interface. Our technique is applied to compute $γ_{\rm cl}$ for the (100), (110) and (111) orientation of the crystalline phase at three temperatures under coexistence conditions. For one case, namely the (100) interface at the temperature $T=1.0$ (in reduced units), we demonstrate that finite-size scaling in the framework of capillary wave theory can be used to estimate $γ_{\rm cl}$ in the thermodynamic limit. Thereby, we show that our TI scheme is not associated with the suppression of capillary wave fluctuations.
△ Less
Submitted 2 June, 2014;
originally announced June 2014.
-
Lennard-Jones systems near solid walls: Computing interfacial free energies from molecular simulation methods
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
Different computational techniques in combination with molecular dynamics computer simulation are used to to determine the wall-liquid and the wall-crystal interfacial free energies of a modified Lennard-Jones (LJ) system in contact with a solid wall. Two different kinds of solid walls are considered: a flat structureless wall and a structured wall consisting of an ideal crystal with the particles…
▽ More
Different computational techniques in combination with molecular dynamics computer simulation are used to to determine the wall-liquid and the wall-crystal interfacial free energies of a modified Lennard-Jones (LJ) system in contact with a solid wall. Two different kinds of solid walls are considered: a flat structureless wall and a structured wall consisting of an ideal crystal with the particles rigidly attached to fcc lattice sites. Interfacial free energies are determined by a thermodynamic integration scheme, the anisotropy of the pressure tensor, the non-equilibrium work method based on Bennett acceptance criteria, and a method using Cahn's adsorption equations based on the interfacial thermodynamics of Gibbs. For the flat wall, interfacial free energies as a function of different densities of the LJ liquid and as a function of temperature along the coexistence curve are calculated. In case of a structured wall, the interaction strength between the wall and the LJ system and the lattice constant of the structured wall are varied. Using the values of the wall-liquid and wall-crystal interfacial energies along with the value for the crystal-liquid interfacial free energy determined previously for the same system by the "cleaving potential method", we obtain the contact angle as a function of various parameters; in particular the conditions are found under which partial wetting occurs.
△ Less
Submitted 3 June, 2013;
originally announced June 2013.
-
Residual Stresses in Glasses
Authors:
M. Ballauff,
J. M. Brader,
S. U. Egelhaaf,
M. Fuchs,
J. Horbach,
N. Koumakis,
M. Krüger,
M. Laurati,
K. J. Mutch,
G. Petekidis,
M. Siebenbürger,
Th. Voigtmann,
J. Zausch
Abstract:
The history dependence of the glasses formed from flow-melted steady states by a sudden cessation of the shear rate $\dotγ$ is studied in colloidal suspensions, by molecular dynamics simulations, and mode-coupling theory. In an ideal glass, stresses relax only partially, leaving behind a finite persistent residual stress. For intermediate times, relaxation curves scale as a function of $\dotγt$, e…
▽ More
The history dependence of the glasses formed from flow-melted steady states by a sudden cessation of the shear rate $\dotγ$ is studied in colloidal suspensions, by molecular dynamics simulations, and mode-coupling theory. In an ideal glass, stresses relax only partially, leaving behind a finite persistent residual stress. For intermediate times, relaxation curves scale as a function of $\dotγt$, even though no flow is present. The macroscopic stress evolution is connected to a length scale of residual liquefaction displayed by microscopic mean-squared displacements. The theory describes this history dependence of glasses sharing the same thermodynamic state variables, but differing static properties.
△ Less
Submitted 15 February, 2013;
originally announced February 2013.
-
Localization dynamics of fluids in random confinement
Authors:
Thomas O. E. Skinner,
Simon K. Schnyder,
Dirk G. A. L. Aarts,
Juergen Horbach,
Roel P. A. Dullens
Abstract:
The dynamics of two-dimensional fluids confined within a random matrix of obstacles is investigated using both colloidal model experiments and molecular dynamics simulations. By varying fluid and matrix area fractions in the experiment, we find delocalized tracer particle dynamics at small matrix area fractions and localized motion of the tracers at high matrix area fractions. In the delocalized r…
▽ More
The dynamics of two-dimensional fluids confined within a random matrix of obstacles is investigated using both colloidal model experiments and molecular dynamics simulations. By varying fluid and matrix area fractions in the experiment, we find delocalized tracer particle dynamics at small matrix area fractions and localized motion of the tracers at high matrix area fractions. In the delocalized region, the dynamics is subdiffusive at intermediate times, and diffusive at long times, while in the localized regime, trapping in finite pockets of the matrix is observed. These observations are found to agree with the simulation of an ideal gas confined in a weakly correlated matrix. Our results show that Lorentz gas systems with soft interactions are exhibiting a smoothening of the critical dynamics and consequently a rounded delocalization-to-localization transition.
△ Less
Submitted 26 September, 2013; v1 submitted 12 February, 2013;
originally announced February 2013.
-
Onset of flow in a confined colloidal glass under an imposed shear stress
Authors:
Pinaki Chaudhuri,
Jürgen Horbach
Abstract:
A confined colloidal glass, under the imposition of a uniform shear stress, is investigated using numerical simulations. Both at macro- and microscales, the consequent dynamics during the onset of flow is studied. When the imposed stress is gradually decreased, the time scale for the onset of steady flow diverges, associated with long-lived spatial heterogeneities. Near this yield-stress regime, p…
▽ More
A confined colloidal glass, under the imposition of a uniform shear stress, is investigated using numerical simulations. Both at macro- and microscales, the consequent dynamics during the onset of flow is studied. When the imposed stress is gradually decreased, the time scale for the onset of steady flow diverges, associated with long-lived spatial heterogeneities. Near this yield-stress regime, persistent creep in the form of shear-banded structures is observed.
△ Less
Submitted 26 October, 2014; v1 submitted 4 February, 2013;
originally announced February 2013.
-
On the Bauschinger effect in supercoooled melts under shear: results from mode coupling theory and molecular dynamics simulations
Authors:
Fabian Frahsa,
Amit Kumar Bhattacharjee,
Jürgen Horbach,
Matthias Fuchs,
Thomas Voigtmann
Abstract:
We study the nonlinear rheology of a glass-forming binary mixture under the reversal of shear flow using molecular dynamics simulations and a schematic model of the mode-coupling theory of the glass transition (MCT). Memory effects lead to a history-dependent response, as exemplified by the vanishing of a stress-overshoot phenomenon in the stress--strain curves of the sheared liquid, and a change…
▽ More
We study the nonlinear rheology of a glass-forming binary mixture under the reversal of shear flow using molecular dynamics simulations and a schematic model of the mode-coupling theory of the glass transition (MCT). Memory effects lead to a history-dependent response, as exemplified by the vanishing of a stress-overshoot phenomenon in the stress--strain curves of the sheared liquid, and a change in the apparent elastic coefficients around states with zero stress. We investigate the various retarded contributions to the stress response at a given time schematically within MCT. The connection of this macroscopic response to single-particle motion is demonstrated using molecular-dynamics simulation.
△ Less
Submitted 29 November, 2012;
originally announced November 2012.
-
Wall-liquid and wall-crystal interfacial free energies via thermodynamic integration: A molecular dynamics simulation study
Authors:
Ronald Benjamin,
Jürgen Horbach
Abstract:
A method is proposed to compute the interfacial free energy of a Lennard-Jones system in contact with a structured wall by molecular dynamics simulation. Both the bulk liquid and bulk face-centered-cubic crystal phase along the (111) orientation are considered. Our approach is based on a thermodynamic integration scheme where first the bulk Lennard-Jones system is reversibly transformed to a state…
▽ More
A method is proposed to compute the interfacial free energy of a Lennard-Jones system in contact with a structured wall by molecular dynamics simulation. Both the bulk liquid and bulk face-centered-cubic crystal phase along the (111) orientation are considered. Our approach is based on a thermodynamic integration scheme where first the bulk Lennard-Jones system is reversibly transformed to a state where it interacts with a structureless flat wall. In a second step, the flat structureless wall is reversibly transformed into an atomistic wall with crystalline structure. The dependence of the interfacial free energy on various parameters such as the wall potential, the density and orientation of the wall is investigated. The conditions are indicated under which a Lennard-Jones crystal partially wets a flat wall.
△ Less
Submitted 26 April, 2012;
originally announced April 2012.
-
Tension and stiffness of the hard sphere crystal-fluid interface
Authors:
Andreas Härtel,
Martin Oettel,
Roberto E. Rozas,
Stefan U. Egelhaaf,
Jürgen Horbach,
Hartmut Löwen
Abstract:
A combination of fundamental measure density functional theory and Monte Carlo computer simulation is used to determine the orientation-resolved interfacial tension and stiffness for the equilibrium hard-sphere crystal-fluid interface. Microscopic density functional theory is in quantitative agreement with simulations and predicts a tension of 0.66 kT/σ^2 with a small anisotropy of about 0.025 kT…
▽ More
A combination of fundamental measure density functional theory and Monte Carlo computer simulation is used to determine the orientation-resolved interfacial tension and stiffness for the equilibrium hard-sphere crystal-fluid interface. Microscopic density functional theory is in quantitative agreement with simulations and predicts a tension of 0.66 kT/σ^2 with a small anisotropy of about 0.025 kT and stiffnesses with e.g. 0.53 kT/σ^2 for the (001) orientation and 1.03 kT/σ^2 for the (111) orientation. Here kT is denoting the thermal energy and σthe hard sphere diameter. We compare our results with existing experimental findings.
△ Less
Submitted 26 June, 2012; v1 submitted 13 March, 2012;
originally announced March 2012.
-
Localization phenomena in models of ion-conducting glass formers
Authors:
Jürgen Horbach,
Thomas Voigtmann,
Felix Höfling,
Thomas Franosch
Abstract:
The mass transport in soft-sphere mixtures of small and big particles as well as in the disordered Lorentz gas (LG) model is studied using molecular dynamics (MD) computer simulations. The soft-sphere mixture shows anomalous small-particle diffusion signifying a localization transition separate from the big-particle glass transition. Switching off small-particle excluded volume constraints slows d…
▽ More
The mass transport in soft-sphere mixtures of small and big particles as well as in the disordered Lorentz gas (LG) model is studied using molecular dynamics (MD) computer simulations. The soft-sphere mixture shows anomalous small-particle diffusion signifying a localization transition separate from the big-particle glass transition. Switching off small-particle excluded volume constraints slows down the small-particle dynamics, as indicated by incoherent intermediate scattering functions. A comparison of logarithmic time derivatives of the mean-squared displacements reveals qualitative similarities between the localization transition in the soft-sphere mixture and its counterpart in the LG. Nevertheless, qualitative differences emphasize the need for further research elucidating the connection between both models.
△ Less
Submitted 4 June, 2010;
originally announced June 2010.
-
Monte Carlo simulations of the solid-liquid transition in hard spheres and colloid-polymer mixtures
Authors:
T. Zykova-Timan,
J. Horbach,
K. Binder
Abstract:
Monte Carlo simulations at constant pressure are performed to study coexistence and interfacial properties of the liquid-solid transition in hard spheres and in colloid-polymer mixtures. The latter system is described as a one-component Asakura-Oosawa (AO) model where the polymer's degrees of freedom are incorporated via an attractive part in the effective potential for the colloid-colloid inter…
▽ More
Monte Carlo simulations at constant pressure are performed to study coexistence and interfacial properties of the liquid-solid transition in hard spheres and in colloid-polymer mixtures. The latter system is described as a one-component Asakura-Oosawa (AO) model where the polymer's degrees of freedom are incorporated via an attractive part in the effective potential for the colloid-colloid interactions. For the considered AO model, the polymer reservoir packing fraction is eta_p^r=0.1 and the colloid-polymer size ratio is q=sigma_p/σ=0.15 (with sigma_p and sigma the diameter of polymers and colloids, respectively). Inhomogeneous solid-liquid systems are prepared by placing the solid fcc phase in the middle of a rectangular simulation box creating two interfaces with the adjoined bulk liquid. By analyzing the growth of the crystalline region at various pressures and for different system sizes, the coexistence pressure p_co is obtained, yielding p_co=11.576 k_BT/sigma^3 for the hard sphere system and p_co=8.0 k_BT/sigma^3 for the AO model (with k_B the Boltzmann constant and T the temperature). Several order parameters are introduced to distinguish between solid and liquid phases and to describe the interfacial properties. From the capillary-wave broadening of the solid-liquid interface, the interfacial stiffness is obtained for the (100) crystalline plane, giving the values gamma=0.49 k_BT/sigma^2 for the hard-sphere system and gamma=0.95 k_BT/sigma^2 for the AO model.
△ Less
Submitted 5 March, 2010;
originally announced March 2010.
-
Aging to Equilibrium Dynamics of SiO2
Authors:
K. Vollmayr-Lee,
J. A. Roman,
J. Horbach
Abstract:
Molecular dynamics computer simulations are used to study the aging dynamics of SiO2 (modeled by the BKS model). Starting from fully equilibrated configurations at high temperatures T_i =5000K/3760K the system is quenched to lower temperatures T_f=2500K, 2750K, 3000K, 3250K and observed after a waiting time t_w. Since the simulation runs are long enough to reach equilibrium at T_f, we are able to…
▽ More
Molecular dynamics computer simulations are used to study the aging dynamics of SiO2 (modeled by the BKS model). Starting from fully equilibrated configurations at high temperatures T_i =5000K/3760K the system is quenched to lower temperatures T_f=2500K, 2750K, 3000K, 3250K and observed after a waiting time t_w. Since the simulation runs are long enough to reach equilibrium at T_f, we are able to study the transition from out-of-equilibrium to equilibrium dynamics. We present results for the partial structure factors, for the generalized incoherent intermediate scattering function C_q(t_w, t_w+t), and for the mean square displacement msd(t_w,t_w+t). We conclude that there are three different t_w regions: (I) At very short waiting times, C_q(t_w, t_w+t) decays very fast without forming a plateau. Similarly msd(t_w,t_w+t) increases without forming a plateau. (II) With increasing t_w a plateau develops in C_q(t_w, t_w+t) and msd(t_w,t_w+t). For intermediate waiting times the plateau height is independent of t_w and T_i. Time superposition applies, i.e. C_q=C_q(t/t_r) where t_r=t_r(t_w) is a waiting time dependent decay time. Furthermore C_q=C(q,t_w,t_w+t) scales as C_q=C(q,z(t_w,t) where z is a function of t_w and t only, i.e. independent of q. (III) At large t_w the system reaches equilibrium, i.e. C_q(t_w,t_w+t) and msd(t_w,t_w+t) are independent of t_w and T_i. For C_q(t_w,t_w+t) we find that the time superposition of intermediate waiting times (II) includes the equilibrium curve (III).
△ Less
Submitted 27 July, 2010; v1 submitted 5 January, 2010;
originally announced January 2010.
-
Nanoflows through disordered media: a joint Lattice Boltzmann and Molecular Dynamics investigation
Authors:
J. Russo,
J. Horbach,
F. Sciortino,
S. Succi
Abstract:
We investigate nanoflows through dilute disordered media by means of joint lattice Boltzmann (LB) and molecular dynamics (MD) simulations -- when the size of the obstacles is comparable to the size of the flowing particles -- for randomly located spheres and for a correlated particle-gel. In both cases at sufficiently low solid fraction, $Φ<0.01$, LB and MD provide similar values of the permeabi…
▽ More
We investigate nanoflows through dilute disordered media by means of joint lattice Boltzmann (LB) and molecular dynamics (MD) simulations -- when the size of the obstacles is comparable to the size of the flowing particles -- for randomly located spheres and for a correlated particle-gel. In both cases at sufficiently low solid fraction, $Φ<0.01$, LB and MD provide similar values of the permeability. However, for $Φ> 0.01$, MD shows that molecular size effects lead to a decrease of the permeability, as compared to the Navier-Stokes predictions. For gels, the simulations highlights a surplus of permeability, which can be accommodated within a rescaling of the effective radius of the gel monomers.
△ Less
Submitted 9 February, 2010; v1 submitted 3 July, 2009;
originally announced July 2009.
-
Computer simulation studies of finite-size broadening of solid-liquid interfaces: From hard spheres to nickel
Authors:
T. Zykova-Timan,
R. E. Rozas,
J. Horbach,
K. Binder
Abstract:
Using Molecular Dynamics (MD) and Monte Carlo (MC) simulations interfacial properties of crystal-fluid interfaces are investigated for the hard sphere system and the one-component metallic system Ni (the latter modeled by a potential of the embedded atom type). Different local order parameters are considered to obtain order parameter profiles for systems where the crystal phase is in coexistence…
▽ More
Using Molecular Dynamics (MD) and Monte Carlo (MC) simulations interfacial properties of crystal-fluid interfaces are investigated for the hard sphere system and the one-component metallic system Ni (the latter modeled by a potential of the embedded atom type). Different local order parameters are considered to obtain order parameter profiles for systems where the crystal phase is in coexistence with the fluid phase, separated by interfaces with (100) orientation of the crystal. From these profiles, the mean-squared interfacial width w^2 is extracted as a function of system size. We rationalize the prediction of capillary wave theory that w^2 diverges logarithmically with the lateral size of the system. We show that one can estimate the interfacial stiffness from the interfacial broadening, obtaining 0.5 k_B T/sigma^2 for hard spheres and 0.18 J/m^2 for Ni.
△ Less
Submitted 12 May, 2009;
originally announced May 2009.