-
Alloying behavior of wide band gap alkaline-earth chalcogenides
Authors:
Samantha L. Millican,
Jacob M. Clary,
Christopher J. Bartel,
Nicholas R. Singstock,
Aaron M. Holder,
Charles B. Musgrave
Abstract:
Alloying is a powerful tool for tuning materials that facilitates the targeted design of desirable properties for a variety of applications. In this work, we provide a comprehensive investigation of the synthetic accessibility and electronic properties of nine alkaline-earth chalcogenide anion alloys (CaS$_{1-x}$O$_x$, CaS$_{1-x}$Se$_x$, CaS$_{1-x}$Te$_x$, SrS$_{1-x}$O$_x$, SrS$_{1-x}$Se$_x$, SrS…
▽ More
Alloying is a powerful tool for tuning materials that facilitates the targeted design of desirable properties for a variety of applications. In this work, we provide a comprehensive investigation of the synthetic accessibility and electronic properties of nine alkaline-earth chalcogenide anion alloys (CaS$_{1-x}$O$_x$, CaS$_{1-x}$Se$_x$, CaS$_{1-x}$Te$_x$, SrS$_{1-x}$O$_x$, SrS$_{1-x}$Se$_x$, SrS$_{1-x}$Te$_x$, MgS$_{1- x}$O$_x$, MgS$_{1-x}$Se$_x$, and MgS$_{1-x}$Te$_x$). We show that isostructural alloying within the rock salt structure is favored for all systems except MgS$_{1-x}$Te$_x$, which is predicted to be a heterostructural alloy between the rock salt and wurtzite structures. Alloys of S and Se are shown to be readily accessible for all cations with low miscibility critical temperatures, enabling continuous tuning of electronic properties across this composition space. Alloys of S and Te have higher critical temperatures but may be accessible through non-equilibrium synthesis strategies and are predicted here to have desirable electronic properties for optoelectronics with wide band gaps and lower effective masses than alloys of S and Se. Anion alloying in MgS$_{1-x}$Te$_x$ stabilizes the wurtzite structure across a significant fraction of composition space, which may make it of particular interest as a transparent conducting material due to its lower effective masses and a higher band gap than the rock salt structure. Zero-point corrected random phase approximation (RPA) energies were computed to resolve the small polymorph energy differences of the Mg compounds and are shown to be critical for accurately describing the thermodynamic properties of the corresponding alloys.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
The role of decomposition reactions in assessing first-principles predictions of solid stability
Authors:
Christopher J. Bartel,
Alan W. Weimer,
Stephan Lany,
Charles B. Musgrave,
Aaron M. Holder
Abstract:
The performance of density functional theory (DFT) approximations for predicting materials thermodynamics is typically assessed by comparing calculated and experimentally determined enthalpies of formation from elemental phases, ΔHf. However, a compound competes thermodynamically with both other compounds and their constituent elemental forms, and thus, the enthalpies of the decomposition reaction…
▽ More
The performance of density functional theory (DFT) approximations for predicting materials thermodynamics is typically assessed by comparing calculated and experimentally determined enthalpies of formation from elemental phases, ΔHf. However, a compound competes thermodynamically with both other compounds and their constituent elemental forms, and thus, the enthalpies of the decomposition reactions to these competing phases, ΔHd, determines thermodynamic stability. We evaluated the phase diagrams for 56,791 compounds to classify decomposition reactions into three types: 1. those that produce elemental phases, 2. those that produce compounds, and 3. those that produce both. This analysis shows that the decomposition into elemental forms is rarely the competing reaction that determines compound stability and that approximately two-thirds of decomposition reactions involve no elemental phases. Using experimentally reported formation enthalpies for 1,012 solid compounds, we assess the accuracy of the generalized gradient approximation (GGA) (PBE) and meta-GGA (SCAN) density functionals for predicting compound stability. For 646 decomposition reactions that are not trivially the formation reaction, PBE (MAD = 70 meV/atom) and SCAN (MAD = 59 meV/atom) perform similarly, and commonly employed correction schemes using fitted elemental reference energies make only a negligible improvement (~2 meV/atom). Furthermore, for 231 reactions involving only compounds (Type 2), the agreement between SCAN, PBE, and experiment is within ~35 meV/atom and is thus comparable to the magnitude of experimental uncertainty.
△ Less
Submitted 7 January, 2019; v1 submitted 18 October, 2018;
originally announced October 2018.
-
Physical descriptor for the Gibbs energy of inorganic crystalline solids and temperature-dependent materials chemistry
Authors:
Christopher J. Bartel,
Samantha L. Millican,
Ann M. Deml,
John R. Rumptz,
William Tumas,
Alan W. Weimer,
Stephan Lany,
Vladan Stevanović,
Charles B. Musgrave,
Aaron M. Holder
Abstract:
The Gibbs energy, G, determines the equilibrium conditions of chemical reactions and materials stability. Despite this fundamental and ubiquitous role, G has been tabulated for only a small fraction of known inorganic compounds, impeding a comprehensive perspective on the effects of temperature and composition on materials stability and synthesizability. Here, we use the SISSO (sure independence s…
▽ More
The Gibbs energy, G, determines the equilibrium conditions of chemical reactions and materials stability. Despite this fundamental and ubiquitous role, G has been tabulated for only a small fraction of known inorganic compounds, impeding a comprehensive perspective on the effects of temperature and composition on materials stability and synthesizability. Here, we use the SISSO (sure independence screening and sparsifying operator) approach to identify a simple and accurate descriptor to predict G for stoichiometric inorganic compounds with ~50 meV/atom (~1 kcal/mol) resolution, and with minimal computational cost, for temperatures ranging from 300-1800 K. We then apply this descriptor to ~30,000 known materials curated from the Inorganic Crystal Structure Database (ICSD). Using the resulting predicted thermochemical data, we generate thousands of temperature-dependent phase diagrams to provide insights into the effects of temperature and composition on materials synthesizability and stability and to establish the temperature-dependent scale of metastability for inorganic compounds.
△ Less
Submitted 6 January, 2019; v1 submitted 21 May, 2018;
originally announced May 2018.
-
Charge Storage in Cation Incorporated α-MnO2
Authors:
Matthias J. Young,
Aaron M. Holder,
Steven M. George,
Charles B. Musgrave
Abstract:
Electrochemical supercapacitors utilizing α-MnO2 offer the possibility of both high power density and high energy density. Unfortunately, the mechanism of electrochemical charge storage in α-MnO2 and the effect of operating conditions on the charge storage mechanism are generally not well understood. Here, we present the first detailed charge storage mechanism of α-MnO2 and explain the capacity di…
▽ More
Electrochemical supercapacitors utilizing α-MnO2 offer the possibility of both high power density and high energy density. Unfortunately, the mechanism of electrochemical charge storage in α-MnO2 and the effect of operating conditions on the charge storage mechanism are generally not well understood. Here, we present the first detailed charge storage mechanism of α-MnO2 and explain the capacity differences between α- and β-MnO2 using a combined theoretical electrochemical and band structure analysis. We identify the importance of the band gap, work function, the point of zero charge, and the tunnel sizes of the electrode material, as well as the pH and stability window of the electrolyte in determining the viability of a given electrode material. The high capacity of α-MnO2 results from cation induced charge-switching states in the band gap that overlap with the scanned potential allowed by the electrolyte. The charge-switching states originate from interstitial and substitutional cations (H+, Li+, Na+, and K+) incorporated into the material. Interstitial cations are found to induce charge-switching states by stabilizing Mn-O antibonding orbitals from the conduction band. Substitutional cations interact with O[2p] dangling bonds that are destabilized from the valence band by Mn vacancies to induce charge-switching states. We calculate the equilibrium electrochemical potentials at which these states are reduced and predict the effect of the electrochemical operating conditions on their contribution to charge storage. The mechanism and theoretical approach we report is general and can be used to computationally screen new materials for improved charge storage via ion incorporation.
△ Less
Submitted 19 October, 2014; v1 submitted 23 June, 2014;
originally announced June 2014.
-
Evidence for hydrogen two-level systems in atomic layer deposition oxides
Authors:
M. S. Khalil,
M. J. A. Stoutimore,
S. Gladchenko,
A. M. Holder,
C. B. Musgrave,
A. C. Kozen,
G. Rubloff,
Y. Q. Liu,
R. G. Gordon,
J. H. Yum,
S. K. Banerjee,
C. J. Lobb,
K. D. Osborn
Abstract:
Two-level system (TLS) defects in dielectrics are known to limit the performance of electronic devices. We study TLS using millikelvin microwave loss measurements of three atomic layer deposited (ALD) oxide films--crystalline BeO ($\rm{c-BeO}$), amorphous $\rm{Al_2O_3}$ ($\rm{a-Al_2O_3}$), and amorphous $\rm{LaAlO_3}$ ($\rm{a-LaAlO_3}$)--and interpret them with room temperature characterization me…
▽ More
Two-level system (TLS) defects in dielectrics are known to limit the performance of electronic devices. We study TLS using millikelvin microwave loss measurements of three atomic layer deposited (ALD) oxide films--crystalline BeO ($\rm{c-BeO}$), amorphous $\rm{Al_2O_3}$ ($\rm{a-Al_2O_3}$), and amorphous $\rm{LaAlO_3}$ ($\rm{a-LaAlO_3}$)--and interpret them with room temperature characterization measurements. We find that the bulk loss tangent in the crystalline film is 6 times higher than in the amorphous films. In addition, its power saturation agrees with an amorphous distribution of TLS. Through a comparison of loss tangent data to secondary ion mass spectrometry (SIMS) impurity analysis we find that the dominant loss in all film types is consistent with hydrogen-based TLS. In the amorphous films excess hydrogen is found at the ambient-exposed surface, and we extract the associated hydrogen-based surface loss tangent. Data from films with a factor of 40 difference in carbon impurities revealed that carbon is currently a negligible contributor to TLS loss.
△ Less
Submitted 29 July, 2013;
originally announced July 2013.
-
Bulk and Surface Tunneling Hydrogen Defects in Alumina
Authors:
Aaron M. Holder,
Kevin D. Osborn,
C. J. Lobb,
Charles B. Musgrave
Abstract:
We perform ab initio calculations of hydrogen-based tunneling defects in alumina to identify deleterious two-level systems (TLS) in superconducting qubits. The defects analyzed include bulk hydrogenated Al vacancies, bulk hydrogen interstitial defects, and a surface OH rotor. The formation energies of the defects are first computed for an Al- and O-rich environment to give the likelihood of defect…
▽ More
We perform ab initio calculations of hydrogen-based tunneling defects in alumina to identify deleterious two-level systems (TLS) in superconducting qubits. The defects analyzed include bulk hydrogenated Al vacancies, bulk hydrogen interstitial defects, and a surface OH rotor. The formation energies of the defects are first computed for an Al- and O-rich environment to give the likelihood of defect occurrence during growth. The potential energy surfaces are then computed and the corresponding dipole moments are evaluated to determine the coupling of the defects to an electric field. Finally, the tunneling energy is computed for the hydrogen defect and the analogous deuterium defect, providing an estimate of the TLS energy and the corresponding frequency for photon absorption. We predict that hydrogenated cation vacancy defects will form a significant density of GHz-frequency TLSs in alumina.
△ Less
Submitted 26 March, 2013;
originally announced March 2013.
-
How chemical pressure affects the fundamental properties of rare-earth pnictides: an ARPES view
Authors:
M. G. Holder,
A. Jesche,
P. Lombardo,
R. Hayn,
D. V. Vyalikh,
K. Kummer,
S. Danzenbächer,
C. Krellner,
C. Geibel,
E. D. L. Rienks,
S. L. Molodtsov,
C. Laubschat
Abstract:
Angle-resolved photoelectron spectroscopy, supplemented by theoretical calculations has been applied to study the electronic structure of heavy-fermion material CeFePO, a homologue to the Fe-based high-temperature superconductors, and CeFeAs_0.7P_0.3O, where the applied chemical pressure results in a ferromagnetic order of the 4f moments. A comparative analysis reveals characteristic differences i…
▽ More
Angle-resolved photoelectron spectroscopy, supplemented by theoretical calculations has been applied to study the electronic structure of heavy-fermion material CeFePO, a homologue to the Fe-based high-temperature superconductors, and CeFeAs_0.7P_0.3O, where the applied chemical pressure results in a ferromagnetic order of the 4f moments. A comparative analysis reveals characteristic differences in the Fe-derived band structure for these materials, implying a rather different hybridization of valence electrons to the localized 4f orbitals. In particular, our results suggest that the ferromagnetism of Ce moments in CeFeAs_0.7P_0.3O is mediated mainly by Fe 3d_xz/yz orbitals, while the Kondo screening in CeFePO is instead due to a strong interaction of Fe 3d_3z^2-r^2 orbitals.
△ Less
Submitted 26 July, 2012;
originally announced July 2012.
-
CeFePO: f-d hybridization and quenching of superconductivity
Authors:
M. G. Holder,
A. Jesche,
P. Lombardo,
R. Hayn,
D. V. Vyalikh,
S. Danzenbächer,
K. Kummer,
C. Krellner,
C. Geibel,
Yu. Kucherenko,
T. Kim,
R. Follath,
S. L. Molodtsov,
C. Laubschat
Abstract:
Being homologue to the new, Fe-based type of high-temperature superconductors, CeFePO exhibits magnetism, Kondo and heavy-fermion phenomena. We experimentally studied the electronic structure of CeFePO by means of angle-resolved photoemission spectroscopy. In particular, contributions of the Ce 4f-derived states and their hybridization to the Fe 3d bands were explored using both symmetry selection…
▽ More
Being homologue to the new, Fe-based type of high-temperature superconductors, CeFePO exhibits magnetism, Kondo and heavy-fermion phenomena. We experimentally studied the electronic structure of CeFePO by means of angle-resolved photoemission spectroscopy. In particular, contributions of the Ce 4f-derived states and their hybridization to the Fe 3d bands were explored using both symmetry selection rules for excitation and their photoionization cross-section variations as a function of photon energy. It was experimentally found - and later on confirmed by LDA as well as DMFT calculations - that the Ce 4f states hybridize to the Fe 3d states of d_{3z^2-r^2} symmetry near the Fermi level that discloses their participation in the occurring electron-correlation phenomena and provides insight into mechanism of superconductivity in oxopnictides.
△ Less
Submitted 3 June, 2010;
originally announced June 2010.
-
Dispersion of a single $4f$ impurity state in photoemission spectra of Yb/W(110)
Authors:
Yu. S. Dedkov,
D. V. Vyalikh,
M. Holder,
M. Weser,
S. L. Molodtsov,
C. Laubschat,
Yu. Kucherenko,
M. Fonin
Abstract:
Angle-resolved photoemission spectra of a monolayer of Yb on W(110) reveal energy splittings and dispersion of the Yb 4f states that are obviously due to their hybridization with W-derived valence bands. These effects occur at well defined points of the surface Brillouin zone although a smearing over reciprocal space is expected from the structural incoherence of the Yb and W lattices. We conclu…
▽ More
Angle-resolved photoemission spectra of a monolayer of Yb on W(110) reveal energy splittings and dispersion of the Yb 4f states that are obviously due to their hybridization with W-derived valence bands. These effects occur at well defined points of the surface Brillouin zone although a smearing over reciprocal space is expected from the structural incoherence of the Yb and W lattices. We conclude therefore that dispersion is not related to the periodic arrangement of the $4f$ states but reflects the k-dependent interaction of a single Yb 4f impurity with W bands.
△ Less
Submitted 20 May, 2008;
originally announced May 2008.
