Showing 1–5 of 5 results for author: Hoevers, H F C

Performance of an X-ray single pixel TES microcalorimeter under DC and AC biasing

Authors: Luciano Gottardi, Jan van der Kuur, Piet A. J. de Korte, Roland Den Hartog, Bob Dirks, Manuela Popescu, Henk F. C. Hoevers, Marcel Bruijn, Maria Parra Borderias, Y. Takei

Abstract: We are developing Frequency Domain Multiplexing (FDM) for the read-out of TES imaging microcalorimeter arrays for future X-ray missions like IXO. In the FDMconfiguration the TES is AC voltage biased at a well defined frequencies (between 0.3 to 10MHz) and acts as an AM modulating element. In this paper we will present a full comparison of the performance of a TES microcalorimeter under DC bias and… ▽ More We are developing Frequency Domain Multiplexing (FDM) for the read-out of TES imaging microcalorimeter arrays for future X-ray missions like IXO. In the FDMconfiguration the TES is AC voltage biased at a well defined frequencies (between 0.3 to 10MHz) and acts as an AM modulating element. In this paper we will present a full comparison of the performance of a TES microcalorimeter under DC bias and AC bias at a frequency of 370kHz. In both cases we measured the current-to-voltage characteristics, the complex impedance, the noise, the X-ray responsivity, and energy resolution. The behaviour is very similar in both cases, but deviations in performances are observed for detector working points low in the superconducting transition (R/RN < 0.5). The measured energy resolution at 5.89keV is 2.7eV for DC bias and 3.7eV for AC bias, while the baseline resolution is 2.8eV and 3.3eV, respectively. △ Less

Submitted 9 April, 2016; originally announced April 2016.

Comments: 4 pages, 5 figuers, the Thirteenth International Workshop on Low Temperature Detectors LTD13

Journal ref: AIP Conf. Proc. 1185, 538 (2009)

Characterisation of a TES-Based X-ray Microcalorimeter in the Energy Range from 150 to 1800 eV Using an Adiabatic Demagnetisation Refrigerator

Authors: Luciano Gottardi, Yoh Takei, Jan van der Kuur, Piet A. J. de Korte, Henk F. C. Hoevers, Dirk Boersma, Marcel Bruijn, Wim Mels, Marcel L. Ridder, Dick Takken, Henk van Weers

Abstract: We characterised a TES-based X-ray microcalorimeter in an adiabatic demagnetisation refrigerator (ADR) using synchrotron radiation. The detector response and energy resolution was measured at the beam-line in the PTB radiometry laboratory at the electron storage ring BESSY II in the range from 200 to 1800 eV. We present and discuss the results of the energy resolution measurements as a function of… ▽ More We characterised a TES-based X-ray microcalorimeter in an adiabatic demagnetisation refrigerator (ADR) using synchrotron radiation. The detector response and energy resolution was measured at the beam-line in the PTB radiometry laboratory at the electron storage ring BESSY II in the range from 200 to 1800 eV. We present and discuss the results of the energy resolution measurements as a function of energy, beam intensity and detector working point. The measured energy resolution ranges between 1.5 to 2.1 eV in the investigated energy range and is weakly dependent on the detector set point. A first analysis shows a count-rate capability, without considerable loss of performance, of about 500 counts per second. △ Less

Submitted 9 April, 2016; originally announced April 2016.

Comments: 6 pages, 5 figures, Proceedings of the 12th International Workshop on Low Temperature Detectors (LTD12)

Journal ref: Journal of Low Temperature Physics, April 2008, Volume 151, Issue 1, pp 106-111

Development of TES-based detectors array for the X-ray Integral Field Unit (X-IFU) on the future x-ray observatory ATHENA

Authors: Luciano Gottardi, Hiroki Akamatsu, Didier Barret, Marcel P. Bruijn, Roland H. den Hartog, Jan-Willem den Herder, Henk F. C. Hoevers, Mikko Kiviranta, Jan van der Kuur, Anton J. van der Linden, Brian D. Jackson, Madu Jambunathan, Marcel L. Ridder

Abstract: We are developing transition-edge sensor (TES)-based microcalorimeters for the X-ray Integral Field Unit (XIFU) of the future European X-Ray Observatory Athena. The microcalorimeters are based on TiAu TESs coupled to 250μm squared, AuBi absorbers. We designed and fabricated devices with different contact geometries between the absorber and the TES to optimise the detector performance and with diff… ▽ More We are developing transition-edge sensor (TES)-based microcalorimeters for the X-ray Integral Field Unit (XIFU) of the future European X-Ray Observatory Athena. The microcalorimeters are based on TiAu TESs coupled to 250μm squared, AuBi absorbers. We designed and fabricated devices with different contact geometries between the absorber and the TES to optimise the detector performance and with different wiring topology to mitigate the self-magnetic field. The design is tailored to optimise the performance under Frequency Domain Multiplexing. In this paper we review the main design feature of the pixels array and we report on the performance of the 18 channels, 2-5MHz frequency domain multiplexer that will be used to characterised the detector array. △ Less

Submitted 2 April, 2016; originally announced April 2016.

Comments: 9 pages, 8 figures

Journal ref: Proc. SPIE 9144, Space Telescopes and Instrumentation 2014: Ultraviolet to Gamma Ray, 91442M (July 25, 2014)

Analysis of impedance and noise data of an X-ray transition-edge sensor using complex thermal models

Authors: M. R. J. Palosaari, K. M. Kinnunen, M. L. Ridder, J. van der Kuur, H. F. C. Hoevers, I. J. Maasilta

Abstract: The so-called excess noise limits the energy resolution of transition-edge sensor (TES) detectors, and its physical origin has been unclear, with many competing models proposed. Here we present the noise and impedance data analysis of a rectangular X-ray Ti/Au TES fabricated at SRON. To account for all the major features in the impedance and noise data simultaneously, we have used a thermal model… ▽ More The so-called excess noise limits the energy resolution of transition-edge sensor (TES) detectors, and its physical origin has been unclear, with many competing models proposed. Here we present the noise and impedance data analysis of a rectangular X-ray Ti/Au TES fabricated at SRON. To account for all the major features in the impedance and noise data simultaneously, we have used a thermal model consisting of three blocks of heat capacities, whereas a two-block model is clearly insufficient. The implication is that, for these detectors, the excess noise is simply thermal fluctuation noise of the internal parts of the device. Equations for the impedance and noise for a three-block model are also given. △ Less

Submitted 2 December, 2011; originally announced December 2011.

Comments: 6 pages, 5 figures

Fluctuation superconductivity limited noise in a transition-edge sensor

Authors: A. Luukanen, K. M. Kinnunen, A. K. Nuottajärvi, H. F. C. Hoevers, W. M. Bergmann Tiest, J. P. Pekola

Abstract: In order to investigate the origin of the until now unaccounted excess noise and to minimize the uncontrollable phenomena at the transition in X-ray microcalorimeters we have developed superconducting transition-edge sensors into an edgeless geometry, the so-called Corbino disk (CorTES), with superconducting contacts in the centre and at the outer perimeter. The measured rms current noise and it… ▽ More In order to investigate the origin of the until now unaccounted excess noise and to minimize the uncontrollable phenomena at the transition in X-ray microcalorimeters we have developed superconducting transition-edge sensors into an edgeless geometry, the so-called Corbino disk (CorTES), with superconducting contacts in the centre and at the outer perimeter. The measured rms current noise and its spectral density can be modeled as resistance noise resulting from fluctuations near the equilibrium superconductor-normal metal boundary △ Less

Submitted 29 April, 2003; v1 submitted 18 February, 2003; originally announced February 2003.

Comments: 9 pages, 4 figures.; Corrections to text and equations; replaced the affected figures. Added reference [12]

Journal ref: Phys.Rev.Lett. 90 (2003) 238306