Showing 1–7 of 7 results for author: Hlawenka, P

Nodeless Hybridization as Proof of Trivial Topology in Samarium Hexaboride

Authors: E. D. L. Rienks, P. Hlawenka, J. Sánchez-Barriga, E. Schierle, M. Jugovac, P. Perna, I. Cojocariu, Kai Chen, K. Siemensmeyer, E. Weschke, A. Varykhalov, N. Y. Shitsevalova, V. B. Filipov, S. Gabáni, K. Flachbart, O. Rader

Abstract: Calculations unanimously predict samarium hexaboride to be a topological Kondo insulator, the first topological insulator driven by strong electron correlation. As of today it appears also experimentally established as the only representative of this material class. Here, we investigate the three-dimensional band structure of SmB$_6$ and show that it is incompatible with a topological Kondo insula… ▽ More Calculations unanimously predict samarium hexaboride to be a topological Kondo insulator, the first topological insulator driven by strong electron correlation. As of today it appears also experimentally established as the only representative of this material class. Here, we investigate the three-dimensional band structure of SmB$_6$ and show that it is incompatible with a topological Kondo insulator which must have hybridization nodes at high-symmetry points. In addition we clarify the remaining questions concerning the nature of the surface states with new data. We address consequences for the search for correlated topological insulators. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Comments: 17 pages, 4 figures

A consistent view of the samarium hexaboride terminations to resolve the nature of its surface states

Authors: H. Herrmann, P. Hlawenka, K. Siemensmeyer, E. Weschke, J. Sánchez-Barriga, A. Varykhalov, N. Y. Shitsevalova, A. V. Dukhnenko, V. B. Filipov, S. Gabáni, K. Flachbart, O. Rader, M. Sterrer, E. D. L. Rienks

Abstract: The research effort prompted by the prediction that SmB$_6$ could be the first topological Kondo insulator has produced a wealth of new results, though not all of these seem compatible. A major discrepancy exists between scanning tunneling microscopy / spectroscopy (STM/S) and angle-resolved photoemission spectroscopy (ARPES), because the two experimental methods suggest a very different number of… ▽ More The research effort prompted by the prediction that SmB$_6$ could be the first topological Kondo insulator has produced a wealth of new results, though not all of these seem compatible. A major discrepancy exists between scanning tunneling microscopy / spectroscopy (STM/S) and angle-resolved photoemission spectroscopy (ARPES), because the two experimental methods suggest a very different number of terminations of the (100) surface with different properties. Here we tackle this issue in a combined STM/S and ARPES study. We find that two of the well-ordered topographies reported in earlier STM studies can be associated with the crystal terminations identified using photoemission. We further observe a reversal of the STM contrast with bias voltage for one of the topographies. We ascribe this result to a different energy dependence of Sm and B-derived states, and show that it can be used to obtain element specific images of SmB$_6$ and identify which topography belongs to which termination. We finally find STS results to support a modification of the low-energy electronic structure at the surface that has been proposed as the trivial origin of surface metallicity in this material. △ Less

Submitted 31 October, 2018; originally announced October 2018.

Comments: 7 pages, 5 figures

Tailoring the nature and strength of electron-phonon interactions in the SrTiO$_3$(001) two-dimensional electron liquid

Authors: Z. Wang, S. McKeown Walker, A. Tamai, Y. Wang, Z. Ristic, F. Y. Bruno, A. de la Torre, S. Riccò, N. C. Plumb, M. Shi, P. Hlawenka, J. Sánchez-Barriga, A. Varykhalov, T. K. Kim, M. Hoesch, P. D. C. King, W. Meevasana, U. Diebold, J. Mesot, B. Moritz, T. P. Devereaux, M. Radovic, F. Baumberger

Abstract: Surfaces and interfaces offer new possibilities for tailoring the many-body interactions that dominate the electrical and thermal properties of transition metal oxides. Here, we use the prototypical two-dimensional electron liquid (2DEL) at the SrTiO$_3$(001) surface to reveal a remarkably complex evolution of electron-phonon coupling with the tunable carrier density of this system. At low density… ▽ More Surfaces and interfaces offer new possibilities for tailoring the many-body interactions that dominate the electrical and thermal properties of transition metal oxides. Here, we use the prototypical two-dimensional electron liquid (2DEL) at the SrTiO$_3$(001) surface to reveal a remarkably complex evolution of electron-phonon coupling with the tunable carrier density of this system. At low density, where superconductivity is found in the analogous 2DEL at the LaAlO$_3$/SrTiO$_3$ interface, our angle-resolved photoemission data show replica bands separated by 100\,meV from the main bands. This is a hallmark of a coherent polaronic liquid and implies strong long-range coupling to a single longitudinal optical phonon mode. In the overdoped regime the preferential coupling to this mode decreases and the 2DEL undergoes a crossover to a more conventional metallic state with weaker short-range electron-phonon interaction. These results place constraints on the theoretical description of superconductivity and allow for a unified understanding of the transport properties in SrTiO$_3$-based 2DELs. △ Less

Submitted 19 February, 2016; v1 submitted 3 June, 2015; originally announced June 2015.

Journal ref: Nature Materials (2016)

Angle-resolved and core-level photoemission study of interfacing the topological insulator Bi1.5Sb0.5Te1.7Se1.3 with Ag, Nb and Fe

Authors: N. de Jong, E. Frantzeskakis, B. Zwartsenberg, Y. K. Huang, D. Wu, P. Hlawenka, J. Sánchez-Barriga, A. Varykhalov, E. van Heumen, M. S. Golden

Abstract: Interfaces between a bulk-insulating topological insulator (TI) and metallic adatoms have been studied using high-resolution, angle-resolved and core-level photoemission. Fe, Nb and Ag were evaporated onto Bi1.5Sb0.5Te1.7Se1.3 (BSTS) surfaces both at room temperature and 38K. The coverage- and temperature-dependence of the adsorption and interfacial formation process have been investigated, highli… ▽ More Interfaces between a bulk-insulating topological insulator (TI) and metallic adatoms have been studied using high-resolution, angle-resolved and core-level photoemission. Fe, Nb and Ag were evaporated onto Bi1.5Sb0.5Te1.7Se1.3 (BSTS) surfaces both at room temperature and 38K. The coverage- and temperature-dependence of the adsorption and interfacial formation process have been investigated, highlighting the effects of the overlayer growth on the occupied electronic structure of the TI. For all coverages at room temperature and for those equivalent to less than 0.1 monolayer at low temperature all three metals lead to a downward shift of the TI's bands with respect to the Fermi level. At room temperature Ag appears to intercalate efficiently into the van der Waals gap of BSTS, accompanied by low-level substitution of the Te/Se atoms of the termination layer of the crystal. This Te/Se substitution with silver increases significantly for low temperature adsorption, and can even dominate the electrostatic environment of the Bi/Sb atoms in the BSTS near-surface region. On the other hand, Fe and Nb evaporants remain close to the termination layer of the crystal. On room temperature deposition, they initially substitute isoelectronically for Bi as a function of coverage, before substituting for Te/Se atoms. For low temperature deposition, Fe and Nb are too immobile for substitution processes and show a behaviour consistent with clustering on the surface. For both Ag and Fe/Nb, these differing adsorption pathways leads to the qualitatively similar and remarkable behavior for low temperature deposition that the chemical potential first moves upward (n-type dopant behavior) and then downward (p-type behavior) on increasing coverage. △ Less

Submitted 27 August, 2015; v1 submitted 28 April, 2015; originally announced April 2015.

Comments: 10 pages, 4 figures. In our Phys. Rev. B manuscript an error was made in formulating the last sentence of the abstract that, unfortunately, was missed in the page proofs. Version 2 on arxiv has the correct formulation of this sentence

Journal ref: Phys. Rev. B 92, 075127 (2015)

Samarium hexaboride: A trivial surface conductor

Authors: P. Hlawenka, K. Siemensmeyer, E. Weschke, A. Varykhalov, J. Sánchez-Barriga, N. Y. Shitsevalova, A. V. Dukhnenko, V. B. Filipov, S. Gabáni, K. Flachbart, O. Rader, E. D. L. Rienks

Abstract: Recent theoretical and experimental studies suggest that SmB$_6$ is the first topological Kondo insulator: A material in which the interaction between localized and itinerant electrons renders the bulk insulating at low temperature, while topological surface states leave the surface metallic. While this would elegantly explain the material's puzzling conductivity, we find the experimentally observ… ▽ More Recent theoretical and experimental studies suggest that SmB$_6$ is the first topological Kondo insulator: A material in which the interaction between localized and itinerant electrons renders the bulk insulating at low temperature, while topological surface states leave the surface metallic. While this would elegantly explain the material's puzzling conductivity, we find the experimentally observed candidates for both predicted topological surface states to be of trivial character instead: The surface state at $\barΓ$ is very heavy and shallow with a mere $\sim 2$ meV binding energy. It exhibits large Rashba splitting which excludes a topological nature. We further demonstrate that the other metallic surface state, located at $\bar{X}$, is not an independent in-gap state as supposed previously, but part of a massive band with much higher binding energy (1.7 eV). We show that it remains metallic down to 1 K due to reduced hybridization with the energy-shifted surface 4$f$ level. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 10 pages, 4 figures

Journal ref: Nat. Commun. 9 (2018) 517

Electronic structure and quantum criticality in Ba(Fe$_{1-x-y}$Co$_{x}$Mn$_{y}$)$_{2}$As$_{2}$, an ARPES study

Authors: E. D. L. Rienks, T. Wolf, K. Koepernik, I. Avigo, P. Hlawenka, C. Lupulescu, T. Arion, F. Roth, W. Eberhardt, U. Bovensiepen, J. Fink

Abstract: We used angle-resolved photoemission spectroscopy (ARPES) and density functional theory calculations to study the electronic structure of Ba(Fe1-x-yCoxMny)2As2 for x=0.06 and 0<=y <=0.07. From ARPES we derive that the substitution of Fe by Mn does not lead to hole doping, indicating a localization of the induced holes. An evaluation of the measured spectral function does not indicate a diverging e… ▽ More We used angle-resolved photoemission spectroscopy (ARPES) and density functional theory calculations to study the electronic structure of Ba(Fe1-x-yCoxMny)2As2 for x=0.06 and 0<=y <=0.07. From ARPES we derive that the substitution of Fe by Mn does not lead to hole doping, indicating a localization of the induced holes. An evaluation of the measured spectral function does not indicate a diverging effective mass or scattering rate near optimal doping. Thus the present ARPES results indicate a continuous evolution of the quasiparticle interaction and therefore question previous quantum critical scenarios. △ Less

Submitted 28 June, 2013; v1 submitted 18 January, 2013; originally announced January 2013.

Comments: Revised version 5 pages, 3 figures

Journal ref: EPL 103, 47004 (2013)

Massless Dirac fermions in epitaxial graphene on Fe(110)

Authors: A. Varykhalov, J. Sánchez-Barriga, P. Hlawenka, O. Rader

Abstract: Graphene grown on Fe(110)by chemical vapor deposition using propylene is investigated by means of angle-resolved photoemission. The presence of massless Dirac fermions is clearly evidenced by the observation of a fully intact Dirac cone. Unlike Ni(111) and Co(0001), the Fe(110) imposes a strongly anisotropic quasi-one-dimensional structure on the graphene. Certain signatures of a superlattice effe… ▽ More Graphene grown on Fe(110)by chemical vapor deposition using propylene is investigated by means of angle-resolved photoemission. The presence of massless Dirac fermions is clearly evidenced by the observation of a fully intact Dirac cone. Unlike Ni(111) and Co(0001), the Fe(110) imposes a strongly anisotropic quasi-one-dimensional structure on the graphene. Certain signatures of a superlattice effect appear in the dispersion of its σ-bands but the Dirac cone does not reveal any detectable superlattice or quantum-size effects although the graphene corrugation is twice as large as in the established two-dimensional graphene superlattice on Ir(111). △ Less

Submitted 31 December, 2012; originally announced December 2012.