-
Photocatalytic Carbon Dioxide Methanation by High-Entropy Oxides: Significance of Work Function
Authors:
Jacqueline Hidalgo-Jiménez,
Taner Akbay,
Xavier Sauvage,
Tatsumi Ishihara,
Kaveh Edalati
Abstract:
Methane (CH4) formation from photocatalytic carbon dioxide (CO2) conversion in water is currently of interest because methane is a fuel, and it can also be transformed into other useful hydrocarbons. However, achieving high selectivity to produce methane remains a challenge because of the large number of contributing electrons (eight) in methanation. High-entropy oxides present a new pathway to tu…
▽ More
Methane (CH4) formation from photocatalytic carbon dioxide (CO2) conversion in water is currently of interest because methane is a fuel, and it can also be transformed into other useful hydrocarbons. However, achieving high selectivity to produce methane remains a challenge because of the large number of contributing electrons (eight) in methanation. High-entropy oxides present a new pathway to tune the catalyst selectivity by arranging various cations in the lattice. This study aims to clarify the selectivity for methane formation in high-entropy photocatalysts containing hybrid d0 + d10 orbital configuration. Several oxides are designed and synthesized which have a base of 3-4 cations with d0 orbital configuration (titanium and zirconium with a valence of 4, and niobium and tantalum with a valence of 5) and incorporate 1-2 elements with d10 orbital configuration (zinc, gallium, indium, bismuth and copper). Results demonstrate that adding elements with a d10 electronic configuration is effective for methane formation, while the selectivity toward methanation is enhanced by increasing the work function of the d10 cations. Selectivity levels over 50% are achieved using these oxides, suggesting a potential strategy for designing new catalysts for methanation.
△ Less
Submitted 19 March, 2025;
originally announced March 2025.
-
Phase and sulfur vacancy engineering in cadmium sulfide for boosting hydrogen production from catalytic plastic waste photoconversion
Authors:
Thanh Tam Nguyen,
Jacqueline Hidalgo-Jiménez,
Xavier Sauvage,
Katsuhiko Saito,
Qixin Guo,
Kaveh Edalati
Abstract:
Cadmium sulfide (CdS) is a well-known low-bandgap photocatalyst, but its efficiency is often hindered by rapid photo-generated carrier recombination and a limited number of active catalytic sites. To overcome these challenges, this study introduces an efficient CdS photocatalyst through a novel strategy combining metastable-to-stable phase transformation and sulfur vacancy generation. This strateg…
▽ More
Cadmium sulfide (CdS) is a well-known low-bandgap photocatalyst, but its efficiency is often hindered by rapid photo-generated carrier recombination and a limited number of active catalytic sites. To overcome these challenges, this study introduces an efficient CdS photocatalyst through a novel strategy combining metastable-to-stable phase transformation and sulfur vacancy generation. This strategy integrates hydrothermal treatment and a high-pressure process to create sulfur vacancies, which serve as active catalytic sites, within a thermodynamically stable wurtzite (hexagonal) phase known for its superior photocatalytic properties. The resulting CdS photocatalyst demonstrates exceptional performance in photoreforming for hydrogen production and the conversion of polyethylene terephthalate (PET) plastic into valuable materials. Compared to commercial CdS catalysts, this new material shows a 23-fold increase in both hydrogen production and plastic degradation without the need for co-catalysts. Quenching experiments reveal that holes and hydroxyl radicals play crucial roles in the photoreforming process of this vacancy-rich CdS. First-principles calculations via density functional theory (DFT) indicate that the hexagonal phase possesses a lower bandgap and it exhibits further bandgap narrowing with the introduction of sulfur vacancies. These findings not only present an innovative approach to CdS processing but also highlight the critical role of sulfur vacancies as effective defects for the catalytic photoreforming of microplastics.
△ Less
Submitted 17 January, 2025;
originally announced January 2025.
-
Mixed atomic-scale electronic configuration as a strategy to avoid cocatalyst utilization in photocatalysis by high-entropy oxides
Authors:
Jacqueline Hidalgo-Jiménez,
Taner Akbay,
Xavier Sauvage,
Tatsumi Ishihara,
Kaveh Edalati
Abstract:
To enhance the activity of photocatalysts for hydrogen production and CO2 conversion, noble metal cocatalysts as electron traps and/or acceptors such as platinum or gold are usually utilized. This study hypothesizes that mixing elements with heterogeneous electronic configurations and diverse electronegativities can provide both acceptor and donor sites of electrons to avoid using cocatalysts. Thi…
▽ More
To enhance the activity of photocatalysts for hydrogen production and CO2 conversion, noble metal cocatalysts as electron traps and/or acceptors such as platinum or gold are usually utilized. This study hypothesizes that mixing elements with heterogeneous electronic configurations and diverse electronegativities can provide both acceptor and donor sites of electrons to avoid using cocatalysts. This hypothesis was examined in high-entropy oxides (HEOs), which show high flexibility for atomic-scale compositional changes by keeping their single-or dual-phase structure. A new highentropy oxide was designed and synthesized by mixing elements with an empty d orbital (titanium, zirconium, niobium and tantalum) and a fully occupied d orbital (gallium). The oxide, synthesized by high-pressure torsion followed by calcination, had two phases (88 wt% orthorhombic (Pbcn) and 12 wt% monoclinic (I2/m)) with an overall composition of TiZrNbTaGaO10.5. It exhibited UV and visible light absorbance with a low bandgap of 2.5 eV, low radiative electron-hole recombination and oxygen vacancy generation due to mixed valences of cations. It successfully acted as a photocatalyst for CO and CH4 production from CO2 conversion and hydrogen production from water splitting without cocatalyst addition. These findings confirm that introducing heterogeneous electronic configurations and electronegativities can be considered as a design criterion to avoid the need to use cocatalysts.
△ Less
Submitted 16 January, 2025;
originally announced January 2025.
-
High-pressure torsion processing of serine and glutamic acid: Understanding mechanochemical behavior of amino acids under astronomical impacts
Authors:
Kaveh Edalati,
Jacqueline Hidalgo-Jiménez,
Thanh Tam Nguyen,
Motonori Watanabe,
Ikuo Taniguchi
Abstract:
Astronomical impacts by small solar system bodies (meteoroids, asteroids, comets, and transitional objects) are considered a mechanism for delivering amino acids and their polymerization to proteins in early Earth conditions. High-pressure torsion (HPT) is a new methodology to simulate such impacts and clarify the behavior of biomolecules. In this study, two amino acids, crystalline L-serine and L…
▽ More
Astronomical impacts by small solar system bodies (meteoroids, asteroids, comets, and transitional objects) are considered a mechanism for delivering amino acids and their polymerization to proteins in early Earth conditions. High-pressure torsion (HPT) is a new methodology to simulate such impacts and clarify the behavior of biomolecules. In this study, two amino acids, crystalline L-serine and L-glutamic acid that were detected in meteorites, are processed by HPT and examined by ex situ X-ray diffraction, Raman spectroscopy, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and in situ mechanical shear testing. No polymerization, chemical reactions, or phase transformations are detected after HPT, indicating that the stability and presence of these two amino acids in meteorites are quite reasonable. However, some microstructural and mechanical changes like crystal size reduction to the nanometer level, crystal defect formation, lattice expansion by vacancy formation, and shear strength enhancement to the steady state are found which are similar to the behaviors reported in metals and ceramics after HPT processing.
△ Less
Submitted 20 August, 2024;
originally announced August 2024.
-
Mechanism of anatase-to-columbite TiO2 phase transformation via sheared phases: first-principles calculations and high-pressure torsion experiments
Authors:
Jacqueline Hidalgo-Jimenez,
Taner Akbay,
Yuji Ikeda,
Tatsumi Ishihara,
Kaveh Edalati
Abstract:
High-pressure torsion (HPT) can facilitate phase transformations in titanium dioxide (TiO2) and stabilize its high-pressure columbite phase, as an active photocatalyst, by shear straining under high pressure. This study aims to understand the mechanism underlying the acceleration of the anatase-to-columbite phase transformation by shear strain. A mechanism by considering sheared crystal structures…
▽ More
High-pressure torsion (HPT) can facilitate phase transformations in titanium dioxide (TiO2) and stabilize its high-pressure columbite phase, as an active photocatalyst, by shear straining under high pressure. This study aims to understand the mechanism underlying the acceleration of the anatase-to-columbite phase transformation by shear strain. A mechanism by considering sheared crystal structures as intermediate phases was proposed and examined using quantum mechanics in the framework of density functional theory (DFT) and HPT experiments. DFT energy and phonon calculations demonstrated the viability of the sheared structures as intermediate phases. Furthermore, the sheared structures were observed experimentally as new metastable phases using high-resolution transmission electron microscopy. These findings can explain the significant effect of shear strain on pressure-induced phase transitions, reported during severe plastic deformation of various metals and ceramics.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Investigation of a high-entropy oxide photocatalyst for hydrogen generation by first-principles calculations coupled with experiments: Significance of electronegativity
Authors:
Jacqueline Hidalgo-Jimenez,
Taner Akbay,
Tatsumi Ishihara,
Kaveh Edalati
Abstract:
High-entropy oxides (HEOs), containing at least five principal cations, have recently emerged as promising photocatalysts for hydrogen production via water splitting. Despite their high potential, the impact of the cation mixtures on photocatalytic activity remains poorly understood. This study investigates the high-entropy photocatalyst TiZrHfNbTaO11 using first-principles calculations combined w…
▽ More
High-entropy oxides (HEOs), containing at least five principal cations, have recently emerged as promising photocatalysts for hydrogen production via water splitting. Despite their high potential, the impact of the cation mixtures on photocatalytic activity remains poorly understood. This study investigates the high-entropy photocatalyst TiZrHfNbTaO11 using first-principles calculations combined with experimental methods to elucidate the effects of various elements on electronic structure and water splitting performance. The results indicate that the HEO exhibits a bandgap comparable to TiO2 polymorphs rutile, brookite and anatase. Cations with lower electronegativity, such as hafnium and zirconium, provide the strongest water adsorption energy, serving as active sites for water adsorption. Additionally, the co-presence of highly electronegative cations like niobium and tantalum adjacent to hafnium and zirconium enhances charge transfer to water molecules, improving splitting efficiency. These findings suggest novel strategies for designing high-entropy photocatalysts by synergistic incorporating cations with different electronegativities.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Black brookite rich in oxygen vacancies as an active photocatalyst for CO2 conversion: experiments and first-principles calculations
Authors:
Masae Katai,
Parisa Edalati,
Jacqueline Hidalgo-Jimenez,
Yu Shundo,
Taner Akbay,
Tatsumi Ishihara,
Makoto Arita,
Masayoshi Fuji,
Kaveh Edalati
Abstract:
Photocatalytic CO2 conversion is a clean technology to deal with CO2 emissions, and titanium oxide (TiO2) polymorphs are the most investigated photocatalysts for such an application. In this study, black TiO2 brookite is produced by a high-pressure torsion (HPT) method and employed as an active photocatalyst for CO2 conversion. Black brookite with a large concentration of lattice defects (vacancie…
▽ More
Photocatalytic CO2 conversion is a clean technology to deal with CO2 emissions, and titanium oxide (TiO2) polymorphs are the most investigated photocatalysts for such an application. In this study, black TiO2 brookite is produced by a high-pressure torsion (HPT) method and employed as an active photocatalyst for CO2 conversion. Black brookite with a large concentration of lattice defects (vacancies, dislocations and grain boundaries) showed enhanced light absorbance, narrowed optical bandgap and diminished recombination rate of electrons and holes. The photocatalytic activity of the black oxide for CO2 conversion was higher compared to commercial brookite and benchmark P25 catalyst powders. First-principles calculations suggested that the presence of oxygen vacancies in black brookite is effective not only for reducing optical bandgap but also for providing active sites for the adsorption of CO2 on the surface of TiO2.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
