-
A high-throughput ab initio study of elemental segregation and cohesion at ferritic-iron grain boundaries
Authors:
Han Lin Mai,
Xiang-Yuan Cui,
Tilmann Hickel,
Jörg Neugebauer,
Simon Ringer
Abstract:
Segregation of alloying elements and impurities at grain boundaries (GBs) critically influences material behavior by affecting cohesion. In this study, we present an ab initio high-throughput evaluation of segregation energies and cohesive effects for all elements in the periodic table (Z: 1 to 92, H to U) across six model ferritic iron GBs using density functional theory (DFT). From these data, w…
▽ More
Segregation of alloying elements and impurities at grain boundaries (GBs) critically influences material behavior by affecting cohesion. In this study, we present an ab initio high-throughput evaluation of segregation energies and cohesive effects for all elements in the periodic table (Z: 1 to 92, H to U) across six model ferritic iron GBs using density functional theory (DFT). From these data, we construct comprehensive elemental maps for solute segregation tendencies and cohesion at GBs, providing guidance for segregation engineering. We systematically assess the cohesive effects of different elements in all segregating positions along multiple fracture paths with a quantum-chemistry bond-order method as well as a modified Rice-Wang theory of interfacial cohesion. The effects of segregants on the cohesion of GBs are shown to vary drastically as a function of site character, and hence their induced cohesive effects must be considered as a thermodynamic average over the spectral energy distribution. Thus, models that overlook these aspects may fail to accurately predict the impacts of varying alloying concentrations, thermal processing conditions, or GB types. The insights presented here, along with our accompanying dataset, are expected to advance our understanding of GB segregation in steels and other materials.
△ Less
Submitted 17 March, 2025; v1 submitted 7 March, 2025;
originally announced March 2025.
-
Dissecting physics of carbon ordering in bcc iron
Authors:
Sam Waseda,
Tilmann Hickel,
Julien Morthomas,
Patrice Chantrenne,
Michel Perez,
Jörg Neugebauer
Abstract:
Zener ordering is a phenomenon that octahedral interstitial atoms such as carbon occupy the same sublattice inside bcc matrix such as iron. The original formulation relies on a mean field theory, which is still most in use today. We employ multiple methods, such as Molecular Dynamics, Metropolis Monte Carlo, Mean Field Theory with chemical interactions and finite temperature effects to show that t…
▽ More
Zener ordering is a phenomenon that octahedral interstitial atoms such as carbon occupy the same sublattice inside bcc matrix such as iron. The original formulation relies on a mean field theory, which is still most in use today. We employ multiple methods, such as Molecular Dynamics, Metropolis Monte Carlo, Mean Field Theory with chemical interactions and finite temperature effects to show that the Zener ordering for iron carbon systems is governed by local chemical interactions and finite temperature effects and less of mean field nature as described originally by Zener.
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
A first-principles study of Zn induced liquid metal embrittlement at bcc and fcc grain boundaries
Authors:
Ujjal Saikia,
Mira Todorova,
Tilmann Hickel
Abstract:
Zn induced liquid metal embrittlement (LME) is a major concern in particular for advanced high strength steels, which often contain a significant amount of austenite compared to established steel grades. Using density functional theory (DFT) calculations we, therefore, compare the behaviour of Zn in ferrite (bcc) and austenite (fcc) grain boundaries (GBs) with different magnetic ordering to invest…
▽ More
Zn induced liquid metal embrittlement (LME) is a major concern in particular for advanced high strength steels, which often contain a significant amount of austenite compared to established steel grades. Using density functional theory (DFT) calculations we, therefore, compare the behaviour of Zn in ferrite (bcc) and austenite (fcc) grain boundaries (GBs) with different magnetic ordering to investigate the role of crystal structure as well as magnetism in LME. We address the performance of DFT based paramagnetic calculations by utilizing the spin space averaging relaxation approach. Our results show that both magnetic and elastic contributions have significant influence towards segregation and embrittling behaviour of Zn. The primary requirement is the elastic contribution, while the presence of magnetic disorder increases the critical concentrations for the onset of GB weakening. While Zn segregation is more favourable in bcc compared to fcc GB, larger impact of Zn coverage on GB weakening is observed for fcc. For both structures, the rapid decrease in surface defect state energies is identified as the driving force behind GB weakening. These surface defect states stabilize at lower Zn concentrations than GB defect states.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Giant segregation transition as origin of liquid metal embrittlement in the Fe-Zn system
Authors:
Reza Darvishi Kamachali,
Theophilus Wallis,
Yuki Ikeda,
Ujjal Saikia,
Ali Ahmadian,
Christian H. Liebscher,
Tilmann Hickel,
Robert Maaß
Abstract:
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modelling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.\% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn cont…
▽ More
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modelling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.\% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn content in the alloy required for triggering the segregation transition decreases. Direct evidence of the Zn segregation transition is obtained using high-resolution scanning transmission electron microscopy. Base on the model, we trace the origin of the segregation transition back to the low cohesive energy of Zn and a miscibility gap in Fe-Zn GB, arising from the magnetic ordering effect, which is confirmed by ab-initio calculations. We also show that the massive Zn segregation resulting from the segregation transition greatly assists with liquid wetting and reduces the work of separation along the GB. The current predictions suggest that control over Zn segregation, by both alloy design and optimizing the galvanization and welding processes, may offer preventive strategies against liquid metal embrittlement.
△ Less
Submitted 31 August, 2023; v1 submitted 26 April, 2023;
originally announced April 2023.
-
Solute Induced Defect Phase Transformations in Mg Grain Boundaries
Authors:
P. Mathews,
S. Zhang,
C. Scheu,
R. Janisch,
J. Neugebauer,
T. Hickel
Abstract:
The study of defect phases is important for designing nanostructured metals and alloys. Grain boundaries (GBs) form one class of defects that directly influence materials properties, such as deformability and strength. At the same time, alloying can introduce GB phase transformations and can therewith alter mechanical performance. In this work, the defect phases of a $Σ$7 $(12\bar{3}0)$ [0001] 21.…
▽ More
The study of defect phases is important for designing nanostructured metals and alloys. Grain boundaries (GBs) form one class of defects that directly influence materials properties, such as deformability and strength. At the same time, alloying can introduce GB phase transformations and can therewith alter mechanical performance. In this work, the defect phases of a $Σ$7 $(12\bar{3}0)$ [0001] 21.78$^\circ$ symmetric tilt GB in hcp Mg are investigated. Ab-initio simulations as a function of stress and temperature (using quasi-harmonic approximation) are performed, and different types of phase transformations are revealed. To this end, the influence of the chemical degree of freedom on the defect phases is studied for the example of Ga addition, using an efficient screening approach that combines empirical potentials and accurate ab-initio calculations. By exploiting the concept of defect phase diagrams, a phase transformation from the T to the A structural type and as well as a systematic transition of the segregation site preference is revealed. The results qualitatively agree well with experimental observations from scanning transition electron microscopy. The underlying physical mechanisms have an impact on grain-boundary engineering in metallic alloys.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Phase stability and defect studies of Mg-based Laves phases using defect phase diagrams
Authors:
A. Tehranchi,
M. Lipinska-Chwalek,
J. Mayer,
J. Neugebauer,
T. Hickel
Abstract:
Laves phases often form as secondary phases in metallic alloys and have a significant effect on their structural properties. Thus, phase stability studies for these chemically and structurally complex phases in addition to mechanical behavior studies are of great interest. In this work, we use the concept of metastable bulk phase and defect phase diagrams to augment the understanding of the bulk p…
▽ More
Laves phases often form as secondary phases in metallic alloys and have a significant effect on their structural properties. Thus, phase stability studies for these chemically and structurally complex phases in addition to mechanical behavior studies are of great interest. In this work, we use the concept of metastable bulk phase and defect phase diagrams to augment the understanding of the bulk phase and defect phase stability in Laves phases in Mg-based alloys. In this way, we resolve the discrepancy between bulk phase diagrams and experimental observations regarding the formation of Mg-rich C14 and Al-rich C15 Laves phases in MgAlCa alloys at moderate temperatures. Moreover, the effect of the thermodynamic state of alloys on the competition between solute-rich hcp-like planar defects and stoichiometric basal stacking faults is clarified, which determines the brittleness of these alloys. \end{abstract}
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Constructing phase diagrams for defects by correlated atomic-scale characterization
Authors:
Xuyang Zhou,
Prince Mathews,
Benjamin Berkels,
Saba Ahmad,
Amel Shamseldeen Ali Alhassan,
Philipp Keuter,
Jochen M. Schneider,
Dierk Raabe,
Jörg Neugebauer,
Gerhard Dehm,
Tilmann Hickel,
Christina Scheu,
Siyuan Zhang
Abstract:
Phase transformations and crystallographic defects are two essential tools to drive innovations in materials. Bulk materials design via tuning chemical compositions has been systematized using phase diagrams. We show here that the same thermodynamic concept can be applied to understand the chemistry at defects. We present a combined experimental and modelling approach to scope and build phase diag…
▽ More
Phase transformations and crystallographic defects are two essential tools to drive innovations in materials. Bulk materials design via tuning chemical compositions has been systematized using phase diagrams. We show here that the same thermodynamic concept can be applied to understand the chemistry at defects. We present a combined experimental and modelling approach to scope and build phase diagrams for defects. The discovery was enabled by triggering phase transformations of individual defects through local alloying, and sequentially imaging the structural and chemical changes using atomic-resolution scanning transmission electron microscopy. By observing atomic-scale phase transformations of a Mg grain boundary through Ga alloying, we exemplified the method to construct a grain boundary phase diagram using ab initio simulations and thermodynamic principles. The methodology enables a systematic development of defect phase diagrams to propel a new paradigm for materials design utilizing chemical complexity and phase transformations at defects.
△ Less
Submitted 31 August, 2023; v1 submitted 16 March, 2023;
originally announced March 2023.
-
Metastable defect phase diagrams as a tool to describe chemically driven defect formation: Application to planar defects
Authors:
A. Tehranchi,
S. Zhang,
A. Zendegani,
C. Scheu,
T. Hickel,
J. Neugebauer
Abstract:
Thermodynamic bulk phase diagrams have become the roadmap used by researchers to identify alloy compositions and process conditions that result in novel materials with tailored microstructures. Recent experimental studies show that changes in the alloy composition can drive not only transitions in the bulk phases present in a material, but also in the concentration and type of defects they contain…
▽ More
Thermodynamic bulk phase diagrams have become the roadmap used by researchers to identify alloy compositions and process conditions that result in novel materials with tailored microstructures. Recent experimental studies show that changes in the alloy composition can drive not only transitions in the bulk phases present in a material, but also in the concentration and type of defects they contain. Defect phase diagrams in combination with density functional theory provide a natural route to study these chemically driven defects. Our results show, however, that direct application of thermodynamic approaches can fail to reproduce the experimentally observed defect formation. Therefore, we extend the concept to metastable defect phase diagrams to account for kinetic limitations that prevent the system from reaching equilibrium. We successfully applied this concept to explain the formation of large concentrations of planar defects in supersaturated Fe-Nb solid solutions and to identify in a joint study with experiments conditions in Mg-Al-Ca alloys for defect phase occurrence. The concept offers new avenues for designing materials with tailored defect structures.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Quantification of electronic and magnetoelastic mechanisms of first-order magnetic phase transitions from first principles: application to caloric effects in La(Fe$_x$Si$_{1-x}$)$_{13}$
Authors:
Eduardo Mendive Tapia,
Christopher E. Patrick,
Tilmann Hickel,
Jörg Neugebauer,
Julie B. Staunton
Abstract:
La(Fe$_x$Si$_{1-x}$)$_{13}$ and derived quaternary compounds are well-known for their giant, tunable, magneto- and barocaloric responses around a first-order paramagnetic-ferromagnetic transition near room temperature with low hysteresis. Remarkably, such a transition shows a large spontaneous volume change together with itinerant electron metamagnetic features. While magnetovolume effects are wel…
▽ More
La(Fe$_x$Si$_{1-x}$)$_{13}$ and derived quaternary compounds are well-known for their giant, tunable, magneto- and barocaloric responses around a first-order paramagnetic-ferromagnetic transition near room temperature with low hysteresis. Remarkably, such a transition shows a large spontaneous volume change together with itinerant electron metamagnetic features. While magnetovolume effects are well-established mechanisms driving first-order transitions, purely electronic sources have a long, subtle history and remain poorly understood. Here we apply a disordered local moment picture to quantify electronic and magnetoelastic effects at finite temperature in La(Fe$_x$Si$_{1-x}$)$_{13}$ from first-principles. We obtain results in very good agreement with experiment and demonstrate that the magnetoelastic coupling, rather than purely electronic mechanisms, drives the first-order character and causes at the same time a huge electronic entropy contribution to the caloric response.
△ Less
Submitted 24 October, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
Tailoring negative pressure by crystal defects: Crack induced hydride formation in Al alloys
Authors:
A. Tehranchi,
P. Chakraborty,
M. L. Freixes,
E. McEniry,
B. Gault,
T. Hickel,
J. Neugebauer
Abstract:
Climate change motivates the search for non-carbon-emitting energy generation and storage solutions. Metal hydrides show promising characteristics for this purpose. They can be further stabilized by tailoring the negative pressure of microstructural and structural defects. Using systematic ab initio and atomistic simulations, we demonstrate that an enhancement in the formation of hydrides at the n…
▽ More
Climate change motivates the search for non-carbon-emitting energy generation and storage solutions. Metal hydrides show promising characteristics for this purpose. They can be further stabilized by tailoring the negative pressure of microstructural and structural defects. Using systematic ab initio and atomistic simulations, we demonstrate that an enhancement in the formation of hydrides at the negatively pressurized crack tip region is feasible by increasing the mechanical tensile load on the specimen. The theoretical predictions have been used to reassess and interpret atom probe tomography experiments for a high-strength 7XXX-aluminium alloy that show a substantial enhancement of hydrogen concentration at structural defects near a stress-corrosion crack tip. These results contain important implications for enhancing the capability of metals as H-storage materials.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Effect of Sn on generalized stacking fault energy surfaces in zirconium and its hydrides
Authors:
P. Chakraborty,
I. Mouton,
B. Gault,
A. Tehranchi,
J. Neugebauer,
T. Hickel
Abstract:
Hydrogen embrittlement in Zr alloy fuel cladding is a primary safety concern for water based nuclear reactors. Here we investigated the stabilisation of planar defects within the forming hydrides by Sn, the primary alloying element of Zircaloy-4 used in the cladding. In order to explain formation of hydrides and planar defects observed in our experiments, we performed atomic-scale ab initio calcul…
▽ More
Hydrogen embrittlement in Zr alloy fuel cladding is a primary safety concern for water based nuclear reactors. Here we investigated the stabilisation of planar defects within the forming hydrides by Sn, the primary alloying element of Zircaloy-4 used in the cladding. In order to explain formation of hydrides and planar defects observed in our experiments, we performed atomic-scale ab initio calculations focusing on the solute interactions with generalized stacking faults in hcp $α$-Zr and fcc zirconium hydrides. Our calculations showed that an increase in Sn concentration leads to a stabilisation of stacking faults in both $α$-Zr and hydride phases. However, the solution enthalpy of Sn is lower in the $α$-Zr as compared to the other hydride phases indicative of two competing processes of Sn depletion/enrichment at the Zr hydride/matrix interface. This is corroborated by experimental findings, where Sn is repelled by hydrides and is mostly found trapped at interfaces and planar defects indicative of stacking faults inside the hydride phases. Our systematic investigation enables us to understand the presence and distribution of solutes in the hydride phases, which provides a deeper insight into the microstructural evolution of such alloy's properties during its service lifetime.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
Ab initio calculation of the magnetic Gibbs free energy of materials using magnetically constrained supercells
Authors:
Eduardo Mendive-Tapia,
Jörg Neugebauer,
Tilmann Hickel
Abstract:
We present a first-principles approach for the computation of the magnetic Gibbs free energy of materials using magnetically constrained supercell calculations. Our approach is based on an adiabatic approximation of slowly varying local moment orientations, the so-called finite-temperature disordered local moment picture. It describes magnetic phase transitions and how electronic and/or magnetostr…
▽ More
We present a first-principles approach for the computation of the magnetic Gibbs free energy of materials using magnetically constrained supercell calculations. Our approach is based on an adiabatic approximation of slowly varying local moment orientations, the so-called finite-temperature disordered local moment picture. It describes magnetic phase transitions and how electronic and/or magnetostructural mechanisms generate a discontinuous (first-order) character. We demonstrate that the statistical mechanics of the local moment orientations can be described by an affordable number of supercell calculations containing noncollinear magnetic configurations. The applicability of our approach is illustrated by firstly studying the ferromagnetic state in bcc Fe. We then investigate the temperature-dependent properties of a triangular antiferromagnetic state stabilizing in two antiperovskite systems Mn$_3$AN (A = Ga, Ni). Our calculations provide the negative volume expansion of these materials as well as the ab initio origin of the discontinuous character of the phase transitions, electronic and/or magnetostructural, in good agreement with experiment.
△ Less
Submitted 23 February, 2022;
originally announced February 2022.
-
Hydrogen trapping and embrittlement in high-strength Al-alloys
Authors:
Huan Zhao,
Poulami Chakraborty,
Dirk Ponge,
Tilmann Hickel,
Binhan Sun,
Chun-Hung Wu,
Baptiste Gault,
Dierk Raabe
Abstract:
Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elus…
▽ More
Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elusive: atomic-scale analysis of H inside an alloy remains a challenge, and this prevents deploying alloy design strategies to enhance the materials' durability. Here we successfully performed near-atomic scale analysis of H trapped in second-phase particles and at grain boundaries in a high-strength 7xxx Al-alloy. We used these observations to guide atomistic ab-initio calculations which show that the co-segregation of alloying elements and H favours grain boundary decohesion, while the strong partitioning of H into the second-phases removes solute H from the matrix, hence preventing H-embrittlement. Our insights further advance the mechanistic understanding of H-assisted embrittlement in Al-alloys, emphasizing the role of H-traps in retarding cracking and guiding new alloy design.
△ Less
Submitted 12 January, 2022;
originally announced January 2022.
-
Automated optimization of convergence parameters in plane wave density functional theory calculations via a tensor decomposition-based uncertainty quantification
Authors:
Jan Janssen,
Edgar Makarov,
Tilmann Hickel,
Alexander V. Shapeev,
Jörg Neugebauer
Abstract:
First principles approaches have revolutionized our ability in using computers to predict, explore and design materials. A major advantage commonly associated with these approaches is that they are fully parameter free. However, numerically solving the underlying equations requires to choose a set of convergence parameters. With the advent of high-throughput calculations it becomes exceedingly imp…
▽ More
First principles approaches have revolutionized our ability in using computers to predict, explore and design materials. A major advantage commonly associated with these approaches is that they are fully parameter free. However, numerically solving the underlying equations requires to choose a set of convergence parameters. With the advent of high-throughput calculations it becomes exceedingly important to achieve a truly parameter free approach. Utilizing uncertainty quantification (UQ) and tensor decomposition we derive a numerically highly efficient representation of the statistical and systematic error in the multidimensional space of the convergence parameters. Based on this formalism we implement a fully automated approach that requires as input the target accuracy rather than convergence parameters. The performance and robustness of the approach are shown by applying it to a large set of elements crystallizing in a cubic fcc lattice.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
Influence of spin fluctuations on structural phase transitions of iron
Authors:
Ning Wang,
Thomas Hammerschmidt,
Tilmann Hickel,
Jutta Rogal,
Ralf Drautz
Abstract:
The effect of spin fluctuations on the $α$ (bcc) - $γ$ (fcc) - $δ$ (bcc) structural phase transitions in iron is investigated with a tight-binding (TB) model. The orthogonal $d$-valent TB model is combined with thermodynamic integration, spin-space averaging and Hamiltonian Monte Carlo to compute the temperature-dependent free-energy difference between bcc and fcc iron. We demonstrate that the TB…
▽ More
The effect of spin fluctuations on the $α$ (bcc) - $γ$ (fcc) - $δ$ (bcc) structural phase transitions in iron is investigated with a tight-binding (TB) model. The orthogonal $d$-valent TB model is combined with thermodynamic integration, spin-space averaging and Hamiltonian Monte Carlo to compute the temperature-dependent free-energy difference between bcc and fcc iron. We demonstrate that the TB model captures experimentally observed phonon spectra of bcc iron at elevated temperatures. Our calculations show that spin fluctuations are crucial for both, the $α$ - $γ$ and the $γ$ - $δ$ phase transitions but they enter through different mechanisms. Spin fluctuations impact the $α$ - $γ$ phase transition mainly via the magnetic/electronic free-energy difference between bcc and fcc iron. The $γ$ - $δ$ phase transition, in contrast, is influenced by spin fluctuations only indirectly via the spin-lattice coupling. Combining the two mechanisms, we obtain both, the $α$ - $γ$ and the $γ$ - $δ$ phase transitions with our TB model. The calculated transition temperatures are in very good agreement with experimental values.
△ Less
Submitted 1 December, 2021; v1 submitted 28 October, 2021;
originally announced October 2021.
-
Understanding alkali contamination in colloidal nanomaterials to unlock grain boundary impurity engineering
Authors:
Se-Ho Kim,
Su-Hyun Yoo,
Poulami Chakraborty,
Jiwon Jeong,
Joohyun Lim,
Ayman A. El-Zoka,
Xuyang Zhou,
Leigh T. Stephenson,
Tilmann Hickel,
Jörg Neugebauer,
Christina Scheu,
Mira Todorova,
Baptiste Gault
Abstract:
Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesi…
▽ More
Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesized Pd nano-aerogels from a K2PdCl4 precursor and two different NaBH4 reductant concentrations in distilled water. Atom probe tomography reveals that the aerogel is poly-crystalline and that impurities (Na, K) are integrated from the solution into grain boundaries. Ab initio calculations indicate that these impurities preferentially bound to the Pd-metal surface and are ultimately found in grain boundaries forming as the particles coalesce during synthesis, with Na atoms thermodynamically equilibrating with the surrounding solution and K atoms remaining between growing grains. If controlled, impurity integration, i.e. grain boundary decoration, may offer opportunities for designing new nano-aerogels.
△ Less
Submitted 4 November, 2021; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Ab initio investigations of point and complex defect structures in B2-FeAl
Authors:
Halil İbrahim Sözen,
Tilmann Hickel,
Jörg Neugebauer
Abstract:
In this work we have studied the defect structure and corresponding defect concentration investigations through the theoretical, experimental and computational works on B2-type Fe-Al alloys. We have used ab initio framework in order to investigate the defect structure. To have a proper explanation for high defect concentration in B2-FeAl, we did not confine with point defect, but extend the work o…
▽ More
In this work we have studied the defect structure and corresponding defect concentration investigations through the theoretical, experimental and computational works on B2-type Fe-Al alloys. We have used ab initio framework in order to investigate the defect structure. To have a proper explanation for high defect concentration in B2-FeAl, we did not confine with point defect, but extend the work on defect complexes. The possible defect formation energies were calculated with the dependence of chemical potential and carefully investigated against supercell size and the effect of magnetism. The calculations revealed that the double Fe antisite at Fe rich condition, the single Fe vacancy at intermediate region (i.e in the stoichiometry) and the double Al antisite is the dominant defect close to Al rich condition, where mainly Al rich region was unstable. From the obtained defect formation energies, defect concentrations were calculated at different temperatures with respect to Al concentration for B2-FeAl. It has been found that increasing Al content and temperature gradually leads to increase in the vacancy content. It has also seen that the dominant defect for all temperature ranges was the single Fe vacancy at the exact stoichiometry and the highest single Fe vacancy content detected with 1.6 % at 1450 K.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Ab-initio based models for temperature-dependent magneto-chemical interplay in bcc Fe-Mn alloys
Authors:
Anton Schneider,
Chu-Chun Fu,
Osamu Waseda,
Cyrille Barreteau,
Tilmann Hickel
Abstract:
Body-centered cubic (bcc) Fe-Mn systems are known to exhibit a complex and atypical magnetic behaviour from both experiments and 0 K electronic-structure calculations, which is due to the half-filled 3d-band of Mn. We propose effective interaction models for these alloys, which contain both atomic spin and chemical variables. They were parameterized on a set of key density functional theory (DFT)…
▽ More
Body-centered cubic (bcc) Fe-Mn systems are known to exhibit a complex and atypical magnetic behaviour from both experiments and 0 K electronic-structure calculations, which is due to the half-filled 3d-band of Mn. We propose effective interaction models for these alloys, which contain both atomic spin and chemical variables. They were parameterized on a set of key density functional theory (DFT) data, with the inclusion of non-collinear magnetic configurations being indispensable. Two distinct approaches, namely a knowledge-driven and a machine-learning approach have been employed for the fitting. Employing these models in atomic Monte Carlo simulations enables the prediction of magnetic and thermodynamic properties of the Fe-Mn alloys, and their coupling, as functions of temperature. This includes the decrease of Curie temperature with increasing Mn concentration, the temperature evolution of the mixing enthalpy and its correlation with the alloy magnetization. Also, going beyond the defect-free systems, we determined the binding free energy between a vacancy and a Mn atom, which is a key parameter controlling the atomic transport in Fe-Mn alloys.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Ab-initio investigation of lattice distortions in response to van der Waals interactions in FeSe
Authors:
Felix Lochner,
Ilya M. Eremin,
Tilmann Hickel,
Jörg Neugebauer
Abstract:
The electronic structure in unconventional superconductors holds a key to understand the momentum-dependent pairing interactions and the resulting superconducting gap function. In superconducting Fe-based chalcogenides, there have been controversial results regarding the importance of the $k_z$ dependence of the electronic dispersion, the gap structure and the pairing mechanisms of iron-based supe…
▽ More
The electronic structure in unconventional superconductors holds a key to understand the momentum-dependent pairing interactions and the resulting superconducting gap function. In superconducting Fe-based chalcogenides, there have been controversial results regarding the importance of the $k_z$ dependence of the electronic dispersion, the gap structure and the pairing mechanisms of iron-based superconductivity. Here, we present a detailed investigation of the van der Waals interaction in FeSe and its interplay with magnetic disorder and real space structural properties. Using density functional theory we show that they need to be taken into account upon investigation of the 3-dimensional effects, including non-trivial topology, of FeSe$_{1-x}$Te$_x$ and FeSe$_{1-x}$S$_x$ systems. In addition, the impact of paramagnetic (PM) disorder is considered within the spin-space average approach. Our calculations show that the PM relaxed structure supports the picture of different competing ordered magnetic states in the nematic regime, yielding magnetic frustration.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Unfolding the complexity of quasi-particle physics in disordered materials
Authors:
Sai Mu,
Raina Olsen,
B. Dutta,
L. Lindsay,
G. D. Samolyuk,
T. Berlijn,
E. D. Specht,
K. Jin,
H. Bei,
T. Hickel,
B. C. Larson,
G. M. Stocks
Abstract:
The concept of quasi-particles forms the theoretical basis of our microscopic understanding of emergent phenomena associated with quantum mechanical many-body interactions. However, quasi-particle theory in disordered materials has proven difficult, resulting in the predominance of mean-field solutions. Here we report first-principles phonon calculations and inelastic x-ray and neutron scattering…
▽ More
The concept of quasi-particles forms the theoretical basis of our microscopic understanding of emergent phenomena associated with quantum mechanical many-body interactions. However, quasi-particle theory in disordered materials has proven difficult, resulting in the predominance of mean-field solutions. Here we report first-principles phonon calculations and inelastic x-ray and neutron scattering measurements on equiatomic alloys (NiCo, NiFe, AgPd, and NiFeCo) with force constant dominant disorder - confronting a key 50-year-old assumption in the Hamiltonian of all mean-field quasi-particle solutions for off-diagonal disorder. Our results have revealed the presence of a large, and heretofore unrecognized, impact of local chemical environments on the distribution of the species-pair-resolved force constant disorder that can dominate phonon scattering. This discovery not only identifies a critical analysis issue that has broad implications for other elementary excitations such as magnons and skyrmions in magnetic alloys, but also provides an important tool for the design of materials with ultra-low thermal conductivity.
△ Less
Submitted 12 June, 2019;
originally announced June 2019.
-
{110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials
Authors:
Johannes J. Möller,
Matous Mrovec,
Ivan Bleskov,
Jörg Neugebauer,
Thomas Hammerschmidt,
Ralf Drautz,
Christian Elsässer,
Tilmann Hickel,
Erik Bitzek
Abstract:
Large-scale atomistic simulations with classical potentials can provide valuable insights into microscopic deformation mechanisms and defect-defect interactions in materials. Unfortunately, these assets often come with the uncertainty of whether the observed mechanisms are based on realistic physical phenomena or whether they are artifacts of the employed material models. One such example is the o…
▽ More
Large-scale atomistic simulations with classical potentials can provide valuable insights into microscopic deformation mechanisms and defect-defect interactions in materials. Unfortunately, these assets often come with the uncertainty of whether the observed mechanisms are based on realistic physical phenomena or whether they are artifacts of the employed material models. One such example is the often reported occurrence of stable planar faults (PFs) in body-centered cubic (bcc) metals subjected to high strains, e.g., at crack tips or in strained nano-objects. In this paper, we study the strain dependence of the generalized stacking fault energy (GSFE) of {110} planes in various bcc metals with material models of increasing sophistication, i.e., (modified) embedded atom method, angular-dependent, Tersoff, and bond-order potentials as well as density functional theory. We show that under applied tensile strains the GSFE curves of many classical potentials exhibit a local minimum which gives rise to the formation of stable PFs. These PFs do not appear when more sophisticated material models are used and have thus to be regarded as artifacts of the potentials. We demonstrate that the local GSFE minimum is not formed for reasons of symmetry and we recommend including the determination of the strain-dependent (110) GSFE as a benchmark for newly developed potentials.
△ Less
Submitted 3 October, 2018;
originally announced October 2018.
-
Anomalous phonon lifetime shortening in paramagnetic CrN caused by magneto-lattice coupling: A combined spin and ab initio molecular dynamics study
Authors:
Irina Stockem,
Anders Bergman,
Albert Glensk,
Tilmann Hickel,
Fritz Körmann,
Blazej Grabowski,
Jörg Neugebauer,
Björn Alling
Abstract:
We study the mutual coupling of spin fluctuations and lattice vibrations in paramagnetic CrN by combining atomistic spin dynamics and ab initio molecular dynamics. The two degrees of freedom are dynamically coupled leading to non-adiabatic effects. Those effects suppress the phonon life times at low temperature compared to an adiabatic approach. The here identified dynamic coupling provides an exp…
▽ More
We study the mutual coupling of spin fluctuations and lattice vibrations in paramagnetic CrN by combining atomistic spin dynamics and ab initio molecular dynamics. The two degrees of freedom are dynamically coupled leading to non-adiabatic effects. Those effects suppress the phonon life times at low temperature compared to an adiabatic approach. The here identified dynamic coupling provides an explanation for the experimentally observed unexpected temperature dependence of the thermal conductivity of magnetic semiconductors above the magnetic ordering temperature.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Electronic properties, low-energy Hamiltonian and superconducting instabilities in CaKFe$_4$As$_4$
Authors:
Felix Lochner,
Felix Ahn,
Tilmann Hickel,
Ilya Eremin
Abstract:
We analyze the electronic properties of the recently discovered stoichiometric superconductor CaKFe$_4$As$_4$ by combining an ab initio approach and a projection of the band structure to a lowenergy tight-binding Hamiltonian, based on the maximally localized Wannier orbitals of the 3d Fe states. We identify the key symmetries as well as differences and similarities in the electronic structure betw…
▽ More
We analyze the electronic properties of the recently discovered stoichiometric superconductor CaKFe$_4$As$_4$ by combining an ab initio approach and a projection of the band structure to a lowenergy tight-binding Hamiltonian, based on the maximally localized Wannier orbitals of the 3d Fe states. We identify the key symmetries as well as differences and similarities in the electronic structure between CaKFe$_4$As$_4$ and the parent systems CaFe$_2$As$_2$ and KFe$_2$As$_2$. In particular, we find CaKFe4As4 to have a significantly more quasi-two-dimensional electronic structure than the latter systems. Finally, we study the superconducting instabilities in CaKFe$_4$As$_4$ by employing the leading angular harmonics approximation (LAHA) and find two potential A$_{1g}$-symmetry representation of the superconducting gap to be the dominant instabilities in this system.
△ Less
Submitted 27 June, 2017;
originally announced June 2017.
-
Spin excitations and the Fermi surface of superconducting FeS
Authors:
Haoran Man,
Jiangang Guo,
Rui Zhang,
Rico U. Schonemann,
Zhiping Yin,
Mingxuan Fu,
M. B. Stone,
Qingzhen Huang,
Yu Song,
Weiyi Wang,
David Singh,
Felix Lochner,
Tillman Hickel,
Ilya Eremin,
Leland Harriger,
Jeffrey W. Lynn,
Collin Broholm,
Luis Balicas,
Qimiao Si,
Pengcheng Dai
Abstract:
High-temperature superconductivity occurs near antiferromagnetic instabilities and nematic state. Debate remains on the origin of nematic order in FeSe and its relation with superconductivity. Here, we use transport, neutron scatter- ing and Fermi surface measurements to demonstrate that hydro-thermo grown superconducting FeS, an isostructure of FeSe, is a tetragonal paramagnet without nematic ord…
▽ More
High-temperature superconductivity occurs near antiferromagnetic instabilities and nematic state. Debate remains on the origin of nematic order in FeSe and its relation with superconductivity. Here, we use transport, neutron scatter- ing and Fermi surface measurements to demonstrate that hydro-thermo grown superconducting FeS, an isostructure of FeSe, is a tetragonal paramagnet without nematic order and with a quasiparticle mass significantly reduced from that of FeSe. Only stripe-type spin excitation is observed up to 100 meV. No direct coupling between spin excitation and superconductivity in FeS is found, suggesting that FeS is less correlated and the nematic order in FeSe is due to competing checkerboard and stripe spin fluctuations.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.
-
Low temperature features in the heat capacity of unary metals and intermetallics for the example of bulk aluminum and Al$_3$Sc
Authors:
Ankit Gupta,
Bengü Tas Kavakbasi,
Biswanath Dutta,
Blazej Grabowski,
Martin Peterlechner,
Tilmann Hickel,
Sergiy V. Divinski,
Gerhard Wilde,
Jörg Neugebauer
Abstract:
We explore the competition and coupling of vibrational and electronic contributions to the heat capacity of Al and Al$_3$Sc at temperatures below 50 K combining experimental calorimetry with highly converged finite temperature density functional theory calculations. We find that semilocal exchange correlation functionals accurately describe the rich feature set observed for these temperatures, inc…
▽ More
We explore the competition and coupling of vibrational and electronic contributions to the heat capacity of Al and Al$_3$Sc at temperatures below 50 K combining experimental calorimetry with highly converged finite temperature density functional theory calculations. We find that semilocal exchange correlation functionals accurately describe the rich feature set observed for these temperatures, including electron-phonon coupling. Using different representations of the heat capacity, we are therefore able to identify and explain deviations from the Debye behaviour in the low-temperature limit and in the temperature regime 30 - 50 K as well as the reduction of these features due to the addition of Sc.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
-
Ab initio explanation of disorder and off-stoichiometry in Fe-Mn-Al-C kappa carbides
Authors:
P. Dey,
R. Nazarov,
B. Dutta,
M. J. Yao,
M. Herbig,
M. Friák,
T. Hickel,
D. Raabe,
J. Neugebauer
Abstract:
Carbides play a central role for the strength and ductility in many materials. Simulating the impact of these precipitates on the mechanical performance requires the knowledge about their atomic configuration. In particular, the C content is often observed to substantially deviate from the ideal stoichiometric composition. In the present work, we focus on Fe-Mn-Al-C steels, for which we determined…
▽ More
Carbides play a central role for the strength and ductility in many materials. Simulating the impact of these precipitates on the mechanical performance requires the knowledge about their atomic configuration. In particular, the C content is often observed to substantially deviate from the ideal stoichiometric composition. In the present work, we focus on Fe-Mn-Al-C steels, for which we determined the composition of the nano-sized kappa carbides (Fe,Mn)3AlC by atom probe tomography (APT) in comparison to larger precipitates located in grain boundaries. Combining density functional theory with thermodynamic concepts, we first determine the critical temperatures for the presence of chemical and magentic disorder in these carbides. Secondly, the experimentally observed reduction of the C content is explained as a compromise between the gain in chemical energy during partitioning and the elastic strains emerging in coherent microstructures.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
-
Grain boundary diffusion in severely deformed Al-based alloy
Authors:
Sergiy V. Divinski,
Vladislav Kulitcki,
Bengü Tas Kavakbasi,
Ankit Gupta,
Yulia Buranova,
Tilmann Hickel,
Jörg Neugebauer,
Gerhard Wilde
Abstract:
Grain boundary diffusion in severely deformed Al-based AA5024 alloy is investigated. Different states are prepared by combination of equal channel angular processing and heat treatments, with the radioisotope $^{57}$Co being employed as a sensitive probe of a given grain boundary state. Its diffusion rates near room temperature (320~K) are utilized to quantify the effects of severe plastic deforma…
▽ More
Grain boundary diffusion in severely deformed Al-based AA5024 alloy is investigated. Different states are prepared by combination of equal channel angular processing and heat treatments, with the radioisotope $^{57}$Co being employed as a sensitive probe of a given grain boundary state. Its diffusion rates near room temperature (320~K) are utilized to quantify the effects of severe plastic deformation and a presumed formation of a previously reported deformation-modified state of grain boundaries, solute segregation at the interfaces, increased dislocation content after deformation and of the precipitation behavior on the transport phenomena along grain boundaries. The dominant effect of nano-sized Al$_3$Sc-based precipitates is evaluated using density functional theory and the Eshelby model for the determination of elastic stresses around the precipitates.
△ Less
Submitted 23 January, 2017;
originally announced January 2017.
-
Robust Bain distortion in the premartensite phase of platinum substituted Ni2MnGa magnetic shape memory alloy
Authors:
Sanjay Singh,
B. Dutta,
S. W. DSouza,
M. G. Zavareh,
P. Devi,
A. S. Gibbs,
T. Hickel,
S. Chadhov,
C. Felser,
D. Pandey
Abstract:
The premartensite phase of shape memory and magnetic shape memory alloys (MSMAs) is believed to be a precursor state of the martensite phase with preserved austenite phase symmetry. The thermodynamic stability of the premartensite phase and its relation to the martensitic phase is still an unresolved issue, even though it is critical to the understanding of the functional properties of MSMAs. We p…
▽ More
The premartensite phase of shape memory and magnetic shape memory alloys (MSMAs) is believed to be a precursor state of the martensite phase with preserved austenite phase symmetry. The thermodynamic stability of the premartensite phase and its relation to the martensitic phase is still an unresolved issue, even though it is critical to the understanding of the functional properties of MSMAs. We present here unambiguous evidence for macroscopic symmetry breaking leading to robust Bain distortion in the premartensite phase of 10% Pt substituted Ni2MnGa. We show that the robust Bain distorted premartensite (T2) phase results from another premartensite (T1) phase with preserved cubic-like symmetry through an isostructural phase transition. The T2 phase finally transforms to the martensite phase with additional Bain distortion on further cooling. Our results demonstrate that the premartensite phase should not be considered as a precursor state with the preserved symmetry of the cubic austenite phase.
△ Less
Submitted 25 July, 2017; v1 submitted 22 November, 2016;
originally announced November 2016.
-
Quantum-Confined Stark Effect in polar and nonpolar Wurtzite InN/GaN Heterostructures: Influence on Electronic Structure and Compensation by Coulomb Attraction
Authors:
Stefan Barthel,
Kolja Schuh,
Oliver Marquardt,
Tilmann Hickel,
Jörg Neugebauer,
Frank Jahnke,
Gerd Czycholl
Abstract:
In this paper we systematically analyze the electronic structures of polar and nonpolar wurtzite-InN/GaN quantum dots and their modification due to the quantum-confined Stark effect caused by intrinsic fields. This is achieved by combining continuum elasticity theory with an empirical tight binding model to describe the elastic and single-particle electronic properties in these nitride systems. Ba…
▽ More
In this paper we systematically analyze the electronic structures of polar and nonpolar wurtzite-InN/GaN quantum dots and their modification due to the quantum-confined Stark effect caused by intrinsic fields. This is achieved by combining continuum elasticity theory with an empirical tight binding model to describe the elastic and single-particle electronic properties in these nitride systems. Based on these results, a many-body treatment is used to determine optical absorption spectra. The efficiency of optical transitions depends on the interplay between the Coulomb interaction and the quantum-confined Stark effect. We introduce an effective confinement potential which represents the electronic structure under the influence of the intrinsic polarization fields and calculate the needed strength of Coulomb interaction to diminish the separation of electrons and holes.
△ Less
Submitted 11 January, 2013;
originally announced January 2013.
-
A comparison of atomistic and continuum theoretical approaches to determine electronic properties of GaN/AlN quantum dots
Authors:
Oliver Marquardt,
Daniel Mourad,
Stefan Schulz,
Tilmann Hickel,
Gerd Czycholl,
Jörg Neugebauer
Abstract:
In this work we present a comparison of multiband k.p-models, the effective bond-orbital approach, and an empirical tight-binding model to calculate the electronic structure for the example of a truncated pyramidal GaN/AlN self-assembled quantum dot with a zincblende structure. For the system under consideration, we find a very good agreement between the results of the microscopic models and the…
▽ More
In this work we present a comparison of multiband k.p-models, the effective bond-orbital approach, and an empirical tight-binding model to calculate the electronic structure for the example of a truncated pyramidal GaN/AlN self-assembled quantum dot with a zincblende structure. For the system under consideration, we find a very good agreement between the results of the microscopic models and the 8-band k.p-formalism, in contrast to a 6+2-band k.p-model, where conduction band and valence band are assumed to be decoupled. This indicates a surprisingly strong coupling between conduction and valence band states for the wide band gap materials GaN and AlN. Special attention is paid to the possible influence of the weak spin-orbit coupling on the localized single-particle wave functions of the investigated structure.
△ Less
Submitted 10 November, 2008;
originally announced November 2008.
-
Carrier induced ferromagnetism in concentrated and diluted local-moment systems
Authors:
W. Nolting,
T. Hickel,
A. Ramakanth,
G. G. Reddy,
M. Lipowczan
Abstract:
For modeling the magnetic properties of concentrated and diluted magnetic semiconductors, we use the Kondo-lattice model. The magnetic phase diagram is derived by inspecting the static susceptibility of itinerant band electrons, which are exchange coupled to localized magnetic moments. It turns out that rather low band occupations favour a ferromagnetic ordering of the local moment systems due t…
▽ More
For modeling the magnetic properties of concentrated and diluted magnetic semiconductors, we use the Kondo-lattice model. The magnetic phase diagram is derived by inspecting the static susceptibility of itinerant band electrons, which are exchange coupled to localized magnetic moments. It turns out that rather low band occupations favour a ferromagnetic ordering of the local moment systems due to an indirect coupling mediated by a spin polarization of the itinerant charge carriers. The disorder in diluted systems is treated by adding a CPA-type concept to the theory. For almost all moment concentrations x, ferromagnetism is possible, however, only for carrier concentrations n distinctly smaller than x. The charge carrier compensation in real magnetic semiconductors (in Ga_{1-x}Mn_{x}As by e.g. antisites) seems to be a necessary condition for getting carrier induced ferromagnetism.
△ Less
Submitted 23 June, 2004;
originally announced June 2004.
-
Proper weak-coupling approach to the periodic s-d(f) exchange model
Authors:
T. Hickel,
W. Nolting
Abstract:
The periodic s-d(f) exchange model is characterized by a wide variety of interesting applications, a simple mathematical structure and a limited number of reliable approximations which take care of the quantum nature of the participating spins. We suggest the use of a projection-operator method for getting information perturbationally, which are not accessible via diagrammatic approaches. In thi…
▽ More
The periodic s-d(f) exchange model is characterized by a wide variety of interesting applications, a simple mathematical structure and a limited number of reliable approximations which take care of the quantum nature of the participating spins. We suggest the use of a projection-operator method for getting information perturbationally, which are not accessible via diagrammatic approaches. In this paper we present in particular results beyond perturbation theory, which are obtained such that almost all exactly known limiting cases are incorporated correctly. We discuss a variety of possible methods and evaluate their consequences for one-particle properties. These considerations serve as a guideline for a more effective approach to the model.
△ Less
Submitted 22 December, 2003;
originally announced December 2003.
-
Exact solution for the two-site correlated Kondo-Lattice Model - a limiting case for a metal
Authors:
T. Hickel,
J. Roeseler,
W. Nolting
Abstract:
The correlated Kondo-lattice model is used to describe the interaction of electrons in a single conduction band with localized magnetic moments as well as their mutual repulsion. It is our intension to provide an analytical exact result for this model by considering a two-site cluster. An equation-of-motion approach as well as the spectral theorem is chosen to obtain the complete expression for…
▽ More
The correlated Kondo-lattice model is used to describe the interaction of electrons in a single conduction band with localized magnetic moments as well as their mutual repulsion. It is our intension to provide an analytical exact result for this model by considering a two-site cluster. An equation-of-motion approach as well as the spectral theorem is chosen to obtain the complete expression for the one-particle Green's function. In a forgoing article the problem has been solved for an insulator, the present paper is devoted to the technical more demanding task of a metal.
△ Less
Submitted 28 November, 2002;
originally announced November 2002.
-
Exact solution for the two-site Kondo-Lattice Model - a limiting case for an insulator
Authors:
T. Hickel,
J. Roeseler,
W. Nolting
Abstract:
The Kondo-lattice model is well established as a method to describe an exchange coupling between single conduction electrons and localized magnetic moments. As a nontrivial exact result the zero-bandwidth limit (atomic limit) can be used to test approximations for this model. As soon as the translational symmetry is broken (for instance by sublattice structures) it is necessary to consider more…
▽ More
The Kondo-lattice model is well established as a method to describe an exchange coupling between single conduction electrons and localized magnetic moments. As a nontrivial exact result the zero-bandwidth limit (atomic limit) can be used to test approximations for this model. As soon as the translational symmetry is broken (for instance by sublattice structures) it is necessary to consider more than one lattice site. Therefore, we study as a starting point for generalizations the situation of a two-site cluster. An equation-of-motion approach is chosen to obtain the one-particle Green's function. In order to determine the spectral weights of its energy poles, we derive different possibilities for the calculation of the involved correlation functions. In this paper the analytical exact result for the situation of an insulator is presented. In a forthcoming article we generalize the calculations to arbitrary electron densities, keeping as the only constraint S=1/2.
△ Less
Submitted 28 November, 2002;
originally announced November 2002.
