Showing 1–17 of 17 results for author: Herrera, M

Wannier center spectroscopy to identify boundary-obstructed topological insulators

Authors: R. A. M. Ligthart, M. A. J. Herrera, A. Visser, A. Vlasblom, D. Bercioux, I. Swart

Abstract: The hallmark of topological crystalline insulators is the emergence of a robust electronic state in a bandgap localized at the boundary of the material. However, end, edge, and surface states can also have a nontopological origin. Unfortunately, topological invariants such as the winding number and Zak phase are often not directly experimentally accessible for solids. In addition to topological in… ▽ More The hallmark of topological crystalline insulators is the emergence of a robust electronic state in a bandgap localized at the boundary of the material. However, end, edge, and surface states can also have a nontopological origin. Unfortunately, topological invariants such as the winding number and Zak phase are often not directly experimentally accessible for solids. In addition to topological invariants, the position of the Wannier centers provides a fingerprint for the topological character of a material. Here, we demonstrate a method to experimentally determine the location of Wannier centers in artificial lattices made of Cs/InAs(111)A by integrating the density of states. We determine the locations of the Wannier centers for various 1D chains, topological and trivial, and corroborate our findings with tight-binding simulations. △ Less

Submitted 29 March, 2025; v1 submitted 19 July, 2024; originally announced July 2024.

Journal ref: Phys. Rev. Research 7, 012076 (2025)

Topological properties of a non-Hermitian quasi-1D chain with a flat band

Authors: C. Martínez-Strasser, M. A. J. Herrera, A. García-Etxarri, G. Palumbo, F. K. Kunst, D. Bercioux

Abstract: The spectral properties of a non-Hermitian quasi-1D lattice in two of the possible dimerization configurations are investigated. Specifically, it focuses on a non-Hermitian diamond chain that presents a zero-energy flat band. The flat band originates from wave interference and results in eigenstates with a finite contribution only on two sites of the unit cell. To achieve the non-Hermitian charact… ▽ More The spectral properties of a non-Hermitian quasi-1D lattice in two of the possible dimerization configurations are investigated. Specifically, it focuses on a non-Hermitian diamond chain that presents a zero-energy flat band. The flat band originates from wave interference and results in eigenstates with a finite contribution only on two sites of the unit cell. To achieve the non-Hermitian characteristics, the system under study presents non-reciprocal hopping terms in the chain. This leads to the accumulation of eigenstates on the boundary of the system, known as the non-Hermitian skin effect. Despite this accumulation of eigenstates, for one of the two considered configurations, it is possible to characterize the presence of non-trivial edge states at zero energy by a real-space topological invariant known as the biorthogonal polarization. This work shows that this invariant, evaluated using the destructive interference method, characterizes the non-trivial phase of the non-Hermitian diamond chain. For the second non-Hermitian configuration, there is a finite quantum metric associated with the flat band. Additionally, the system presents the skin effect despite the system having a purely real or imaginary spectrum. The two non-Hermitian diamond chains can be mapped into two models of the Su-Schrieffer-Heeger chains, either non-Hermitian, and Hermitian, both in the presence of a flat band. This mapping allows to draw valuable insights into the behavior and properties of these systems. △ Less

Submitted 18 December, 2023; v1 submitted 17 July, 2023; originally announced July 2023.

Comments: 14 pages, 9 figures

Journal ref: Adv Quantum Technol. (2023) 2300225

Determination of Thickness-dependent Damping Constant and Plasma Frequency for Ultrathin Ag and Au Films: Nanoscale Dielectric Function

Authors: Luis J. Mendoza Herrera, Myrian C. Tebaldi, Lucía B. Scaffardi, Daniel C. Schinca

Abstract: There is an ever increasing interest in the development of plasmonic 2D nanomaterials, with widespread applications in optoelectronics, high resolution microscopy, imaging and sensing, among others. With the current ability of ultrathin noble metal film deposition down to a few monolayers in thickness, there is a need for an analytical expression of the thickness dependent complex dielectric funct… ▽ More There is an ever increasing interest in the development of plasmonic 2D nanomaterials, with widespread applications in optoelectronics, high resolution microscopy, imaging and sensing, among others. With the current ability of ultrathin noble metal film deposition down to a few monolayers in thickness, there is a need for an analytical expression of the thickness dependent complex dielectric function for predicting optical properties for arbitrary thicknesses. The free and bound electron contributions to the dielectric function are dealt with independently, since their influences affect separate wavelengths ranges. The former is dealt within the Drude model framework for large wavelengths with appropriately addressed damping constant and plasma frequency parameters to account for thickness dependence. Applying our previously developed method, we determine these parameters for specific film thicknesses, based on refractive index experimental values for Ag and Au thin films. Fitting separately each one of these parameters allowed us to find an analytical expression for their dependence on arbitrary film thickness and consequently for the free electron contribution. Concerning bound electrons, it is seen that its contribution for small wavelengths is the same for all analyzed thicknesses and may be set equal to the bulk bound contribution. Taking all these facts into account, the complex dielectric function can be rewritten analytically, in terms of the bulk dielectric function plus corrective film thickness dependent terms. In particular, the fitting process for the damping constant allows us to determine that the electron scattering at the film boundary is mainly diffusive (inelastic) for both silver and gold thin films. It is also shown that, in accordance with theoretical studies, plasma frequency shows a red shift as the film thickness decreases. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Tunable Dirac points in a two-dimensional non-symmorphic wallpaper group lattice

Authors: M. A. J. Herrera, D. Bercioux

Abstract: Non-symmorphic symmetries protect Dirac nodal lines and cones in lattice systems. Here, we investigate the spectral properties of a two-dimensional lattice belonging to a non-symmorphic group. Specifically, we look at the herringbone lattice, characterised by two sets of glide symmetries applied in two orthogonal directions. We describe the system using a nearest-neighbour tight-binding model cont… ▽ More Non-symmorphic symmetries protect Dirac nodal lines and cones in lattice systems. Here, we investigate the spectral properties of a two-dimensional lattice belonging to a non-symmorphic group. Specifically, we look at the herringbone lattice, characterised by two sets of glide symmetries applied in two orthogonal directions. We describe the system using a nearest-neighbour tight-binding model containing horizontal and vertical hopping terms. We find two non-equivalent Dirac cones inside the first Brillouin zone along a high-symmetry path. We tune these Dirac cones' positions by breaking the lattice symmetries using onsite potentials. These Dirac cones can merge into a semi-Dirac cone or unfold along a high-symmetry path. Finally, we perturb the system by applying a dimerization of the hopping terms. We report a flow of Dirac cones inside the first Brillouin zone describing quasi-hyperbolic curves. We present an implementation in terms of CO atoms placed on the top of a Cu(111) surface. △ Less

Submitted 25 January, 2023; v1 submitted 20 July, 2022; originally announced July 2022.

Comments: 12 pages with 9 figures and supplemental material; in press

Journal ref: Communications Physics 6, 42 (2023)

Energy density as a probe of band representations in photonic crystals

Authors: M. Blanco de Paz, M. A. J. Herrera, P. Arroyo Huidobro, H. Alaeian, M. G. Vergniory, B. Bradlyn, G. Giedke, A. García-Etxarri, D. Bercioux

Abstract: Topological Quantum Chemistry (TQC) has recently emerged as a instrumental tool to characterize the topological nature of both fermionic and bosonic band structures. TQC is based on the study of band representations and the localization of maximally localized Wannier functions. In this article, we study various two-dimensional photonic crystal structures analyzing their topological character throu… ▽ More Topological Quantum Chemistry (TQC) has recently emerged as a instrumental tool to characterize the topological nature of both fermionic and bosonic band structures. TQC is based on the study of band representations and the localization of maximally localized Wannier functions. In this article, we study various two-dimensional photonic crystal structures analyzing their topological character through a combined study of TQC, their Wilson-loop spectra and the electromagnetic energy density. Our study demonstrates that the analysis of the spatial localization of the energy density complements the study of the topological properties in terms of the spectrum of the Wilson-loop operator and TQC. △ Less

Submitted 21 March, 2022; originally announced March 2022.

Journal ref: J. Phys.: Condens. Matter 34 314002 (2022)

Corner modes of the breathing kagome lattice: origin and robustness

Authors: M. A. J. Herrera, S. N. Kempkes, M. Blanco de Paz, A. García-Etxarri I. Swart, C. Morais Smith, D. Bercioux

Abstract: We study the non-trivial phase of the two-dimensional breathing kagome lattice, displaying both edge and corner modes. The corner localized modes of a two-dimensional flake were initially identified as a signature of a higher-order topological phase but later shown to be trivial for perturbations that were thought to protect them. Using various theoretical and simulation techniques, we confirm tha… ▽ More We study the non-trivial phase of the two-dimensional breathing kagome lattice, displaying both edge and corner modes. The corner localized modes of a two-dimensional flake were initially identified as a signature of a higher-order topological phase but later shown to be trivial for perturbations that were thought to protect them. Using various theoretical and simulation techniques, we confirm that it does not display higher-order topology: the corner modes are of trivial nature. Nevertheless, they might be protected. First, we show a set of perturbations within a tight-binding model that can move the corner modes away from zero energy, also repeat some perturbations that were used to show that the modes are trivial. In addition, we analyze the protection of the corner modes in more detail and find that only perturbations respecting the sublattice or generalized chiral and crystalline symmetries, and the lattice connectivity, pin the corner modes to zero energy robustly. A destructive interference model corroborates the results. Finally, we analyze a muffin-tin model for the bulk breathing kagome lattice. Using topological and symmetry markers, such as Wilson loops and Topological Quantum Chemistry, we identify the two breathing phases as adiabatically disconnected different obstructed atomic limits. △ Less

Submitted 13 February, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

Comments: 18 pages, 7 figure

Journal ref: Physical Review B 105, 085411 (2022)

Efficiency of free auxiliary models in describing interacting fermions: from the Kohn-Sham model to the optimal entanglement model

Authors: Kristian Patrick, Marcela Herrera, Jake Southall, Irene D'Amico, Jiannis K. Pachos

Abstract: Density functional theory maps an interacting Hamiltonian onto the Kohn-Sham Hamiltonian, an explicitly free model with identical local fermion densities. Using the interaction distance, the minimum distance between the ground state of the interacting system and a generic free fermion state, we quantify the applicability and limitations of the exact Kohn-Sham model in capturing the various propert… ▽ More Density functional theory maps an interacting Hamiltonian onto the Kohn-Sham Hamiltonian, an explicitly free model with identical local fermion densities. Using the interaction distance, the minimum distance between the ground state of the interacting system and a generic free fermion state, we quantify the applicability and limitations of the exact Kohn-Sham model in capturing the various properties of the interacting system. As a byproduct, this distance determines the optimal free state that reproduces the entanglement properties of the interacting system as faithfully as possible. The parent Hamiltonian of the optimal free state identifies a system that can determine the expectation value of any observable with controlled accuracy. This optimal entanglement model opens up the possibility of extending the systematic applicability of auxiliary free models into the non-perturbative, strongly-correlated regimes. △ Less

Submitted 4 September, 2019; v1 submitted 9 April, 2018; originally announced April 2018.

Comments: 7+2 pages, 3+1 figures, presentation improved

Journal ref: Phys. Rev. B 100, 075133 (2019)

Melting a Hubbard dimer: benchmarks of `ALDA' for quantum thermodynamics

Authors: Marcela Herrera, Krissia Zawadzki, Irene D'Amico

Abstract: The competition between evolution time, interaction strength, and temperature challenges our understanding of many-body quantum systems out-of-equilibrium. Here we consider a benchmark system, the Hubbard dimer, which allows us to explore all the relevant regimes and calculate exactly the related average quantum work. At difference with previous studies, we focus on the effect of increasing temper… ▽ More The competition between evolution time, interaction strength, and temperature challenges our understanding of many-body quantum systems out-of-equilibrium. Here we consider a benchmark system, the Hubbard dimer, which allows us to explore all the relevant regimes and calculate exactly the related average quantum work. At difference with previous studies, we focus on the effect of increasing temperature, and show how this can turn competition between many-body interactions and driving field into synergy. We then turn to use recently proposed protocols inspired by density functional theory to explore if these effects could be reproduced by using simple approximations. We find that, up to and including intermediate temperatures, a method which borrows from ground-state adiabatic local density approximation improves dramatically the estimate for the average quantum work, including, in the adiabatic regime, when correlations are strong. However at high temperature and at least when based on the pseudo-LDA, this method fails to capture the counterintuitive qualitative dependence of the quantum work with interaction strength, albeit getting the quantitative estimates relatively close to the exact results. △ Less

Submitted 18 March, 2018; originally announced March 2018.

Experimental characterization of a spin quantum heat engine

Authors: John P. S. Peterson, Tiago B. Batalhão, Marcela Herrera, Alexandre M. Souza, Roberto S. Sarthour, Ivan S. Oliveira, Roberto M. Serra

Abstract: Developments in the thermodynamics of small quantum systems envisage non-classical thermal machines. In this scenario, energy fluctuations play a relevant role in the description of irreversibility. We experimentally implement a quantum heat engine based on a spin-1/2 system and nuclear magnetic resonance techniques. Irreversibility at microscope scale is fully characterized by the assessment of e… ▽ More Developments in the thermodynamics of small quantum systems envisage non-classical thermal machines. In this scenario, energy fluctuations play a relevant role in the description of irreversibility. We experimentally implement a quantum heat engine based on a spin-1/2 system and nuclear magnetic resonance techniques. Irreversibility at microscope scale is fully characterized by the assessment of energy fluctuations associated with the work and heat flows. We also investigate the efficiency lag related to the entropy production at finite time. The implemented heat engine operates in a regime where both thermal and quantum fluctuations (associated with transitions among the instantaneous energy eigenstates) are relevant to its description. Performing a quantum Otto cycle at maximum power, the proof-of-concept quantum heat engine is able to reach an efficiency for work extraction ($η\approx42$%) very close to its thermodynamic limit ($η=44$%). △ Less

Submitted 4 September, 2019; v1 submitted 15 March, 2018; originally announced March 2018.

Journal ref: Phys. Rev. Lett. 123, 240601 (2019)

DFT-inspired methods for quantum thermodynamics

Authors: Marcela Herrera, Roberto M. Serra, Irene D'Amico

Abstract: In the framework of quantum thermodynamics, we propose a method to quantitatively describe thermodynamic quantities for out-of-equilibrium interacting many-body systems. The method is articulated in various approximation protocols which allow to achieve increasing levels of accuracy, it is relatively simple to implement even for medium and large number of interactive particles, and uses tools and… ▽ More In the framework of quantum thermodynamics, we propose a method to quantitatively describe thermodynamic quantities for out-of-equilibrium interacting many-body systems. The method is articulated in various approximation protocols which allow to achieve increasing levels of accuracy, it is relatively simple to implement even for medium and large number of interactive particles, and uses tools and concepts from density functional theory. We test the method on the driven Hubbard dimer at half filling, and compare exact and approximate results. We show that the proposed method reproduces the average quantum work to high accuracy: for a very large region of parameter space (which cuts across all dynamical regimes) estimates are within 10% of the exact results. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Journal ref: Scientific Reports 7, 4655 (2017)

Spatially embedded growing small-world networks

Authors: Ari Zitin, Alex Gorowora, Shane Squires, Mark Herrera, Thomas M. Antonsen, Michelle Girvan, Edward Ott

Abstract: Networks in nature are often formed within a spatial domain in a dynamical manner, gaining links and nodes as they develop over time. We propose a class of spatially-based growing network models and investigate the relationship between the resulting statistical network properties and the dimension and topology of the space in which the networks are embedded. In particular, we consider models in wh… ▽ More Networks in nature are often formed within a spatial domain in a dynamical manner, gaining links and nodes as they develop over time. We propose a class of spatially-based growing network models and investigate the relationship between the resulting statistical network properties and the dimension and topology of the space in which the networks are embedded. In particular, we consider models in which nodes are placed one by one in random locations in space, with each such placement followed by configuration relaxation toward uniform node density, and connection of the new node with spatially nearby nodes. We find that such growth processes naturally result in networks with small-world features, including a short characteristic path length and nonzero clustering. These properties do not appear to depend strongly on the topology of the embedding space, but do depend strongly on its dimension; higher-dimensional spaces result in shorter path lengths but less clustering. △ Less

Submitted 26 December, 2013; originally announced December 2013.

Dynamic Localization of Interacting Particles in an Anharmonic Potential

Authors: Mark Herrera, Thomas M. Antonsen, Edward Ott, Shmuel Fishman

Abstract: We investigate the effect of anharmonicity and interactions on the dynamics of an initially Gaussian wavepacket in a weakly anharmonic potential. We note that depending on the strength and sign of interactions and anharmonicity, the quantum state can be either localized or delocalized in the potential. We formulate a classical model of this phenomenon and compare it to quantum simulations done for… ▽ More We investigate the effect of anharmonicity and interactions on the dynamics of an initially Gaussian wavepacket in a weakly anharmonic potential. We note that depending on the strength and sign of interactions and anharmonicity, the quantum state can be either localized or delocalized in the potential. We formulate a classical model of this phenomenon and compare it to quantum simulations done for a self consistent potential given by the Gross-Pitaevskii Equation. △ Less

Submitted 12 December, 2012; originally announced December 2012.

Comments: 5 Pages, 3 figures

Analysis of the 3D distribution of self-assembled stacked quantum dots by electron tomography

Authors: Jesús Hernández-Saz, Miriam Herrera, Diego Alonso-Álvarez, Sergio I. Molina

Abstract: This paper has been withdrawn by the authors. The 3D distribution of self-assembled stacked quantum dots (QDs) is a key parameter to obtain the highest performance in a variety of optoelectronic devices. In this work, we have measured this distribution in 3D using a combined procedure of needle-shape specimen preparation and electron tomography. We show that conventional 2D measurements of the dis… ▽ More This paper has been withdrawn by the authors. The 3D distribution of self-assembled stacked quantum dots (QDs) is a key parameter to obtain the highest performance in a variety of optoelectronic devices. In this work, we have measured this distribution in 3D using a combined procedure of needle-shape specimen preparation and electron tomography. We show that conventional 2D measurements of the distribution of QDs are not reliable, and only a 3D analysis allows an accurate correlation between the growth design and the structural characteristics. △ Less

Submitted 24 October, 2012; v1 submitted 5 September, 2012; originally announced September 2012.

Strain balanced quantum posts

Authors: D. Alonso-Álvarez, B. Alén, J. M. Ripalda, J. Llorens, A. G. Taboada, F. Briones, M. A. Roldán, J. Hernández-Saz, D. Hernández-Maldonado, M. Herrera, S. I. Molina

Abstract: Quantum posts are assembled by epitaxial growth of closely spaced quantum dot layers, modulating the composition of a semiconductor alloy, typically InGaAs. In contrast with most self-assembled nanostructures, the height of quantum posts can be controlled with nanometer precision, up to a maximum value limited by the accumulated stress due to the lattice mismatch. Here we present a strain compensa… ▽ More Quantum posts are assembled by epitaxial growth of closely spaced quantum dot layers, modulating the composition of a semiconductor alloy, typically InGaAs. In contrast with most self-assembled nanostructures, the height of quantum posts can be controlled with nanometer precision, up to a maximum value limited by the accumulated stress due to the lattice mismatch. Here we present a strain compensation technique based on the controlled incorporation of phosphorous, which substantially increases the maximum attainable quantum post height. The luminescence from the resulting nanostructures presents giant linear polarization anisotropy. △ Less

Submitted 7 March, 2011; v1 submitted 22 February, 2011; originally announced February 2011.

Comments: Submitted to Applied Physics Letters (7th March 2011). 4 pages, 4 figures

Journal ref: Appl. Phys. Lett. 98, 173106 (2011)

The path to fracture in granular flows: dynamics of contact networks

Authors: Mark Herrera, Shane McCarthy, Steven Slotterback, Emmanuel Cephas, Wolfgang Losert, Michelle Girvan

Abstract: Capturing the dynamics of granular flows at intermediate length scales can often be difficult. We propose studying the dynamics of contact networks as a new tool to study fracture at intermediate scales. Using experimental three-dimensional flow fields with particle-scale resolution, we calculate the time evolving broken-links network and find that a giant component of this network is formed as sh… ▽ More Capturing the dynamics of granular flows at intermediate length scales can often be difficult. We propose studying the dynamics of contact networks as a new tool to study fracture at intermediate scales. Using experimental three-dimensional flow fields with particle-scale resolution, we calculate the time evolving broken-links network and find that a giant component of this network is formed as shear is applied to this system. We implement a model of link breakages where the probability of a link breaking is proportional to the average rate of longitudinal strain (elongation) in the direction of the edge and find that the model demonstrates qualitative agreement with the data when studying the onset of the giant component. We note, however, that the broken-links network formed in the model is less clustered than our experimental observations, indicating that the model reflects less localized breakage events and does not fully capture the dynamics of the granular flow. △ Less

Submitted 27 June, 2011; v1 submitted 1 February, 2011; originally announced February 2011.

Comments: 15 pages, 6 figures, accepted for publication in Phys. Rev. E

Journal ref: Phys. Rev. E 83, 061303 (2011)

Phase mapping of aging process in InN nanostructures: oxygen incorporation and the role of the zincblende phase

Authors: D. Gonzalez, J. G. Lozano, M. Herrera, F. M. Morales, S. Ruffenach, O. Briot, R. Garcia

Abstract: Uncapped InN nanostructures undergo a deleterious natural aging process at ambient conditions by oxygen incorporation. The phases involved in this process and their localization is mapped by Transmission Electron Microscopy (TEM) related techniques. The parent wurtzite InN (InN-w) phase disappears from the surface and gradually forms a highly textured cubic layer that completely wraps up a InN-w… ▽ More Uncapped InN nanostructures undergo a deleterious natural aging process at ambient conditions by oxygen incorporation. The phases involved in this process and their localization is mapped by Transmission Electron Microscopy (TEM) related techniques. The parent wurtzite InN (InN-w) phase disappears from the surface and gradually forms a highly textured cubic layer that completely wraps up a InN-w nucleus which still remains from original single-crystalline quantum dots. The good reticular relationships between the different crystals generate low misfit strains and explain the apparent easiness for phase transformations at room temperature and pressure conditions, but also disable the classical methods to identify phases and grains from TEM images. The application of the geometrical phase algorithm in order to form numerical moire mappings, and RGB multilayered image reconstructions allows to discern among the different phases and grains formed inside these nanostructures. Samples aged for shorter times reveal the presence of metastable InN:O zincblende (zb) volumes, which acts as the intermediate phase between the initial InN-w and the most stable cubic In2O3 end phase. These cubic phases are highly twinned with a proportion of 50:50 between both orientations. We suggest that the existence of the intermediate InN:O-zb phase should be seriously considered to understand the reason of the widely scattered reported fundamental properties of thought to be InN-w, as its bandgap or superconductivity. △ Less

Submitted 23 November, 2009; originally announced November 2009.

Comments: 18 pages 7 figures

Conformal Dynamics of Precursors to Fracture

Authors: Felipe Barra, Mauricio Herrera, Itamar Procaccia

Abstract: An exact integro-differential equation for the conformal map from the unit circle to the boundary of an evolving cavity in a stressed 2-dimensional solid is derived. This equation provides an accurate description of the dynamics of precursors to fracture when surface diffusion is important. The solution predicts the creation of sharp grooves that eventually lead to material failure via rapid fra… ▽ More An exact integro-differential equation for the conformal map from the unit circle to the boundary of an evolving cavity in a stressed 2-dimensional solid is derived. This equation provides an accurate description of the dynamics of precursors to fracture when surface diffusion is important. The solution predicts the creation of sharp grooves that eventually lead to material failure via rapid fracture. Solutions of the new equation are demonstrated for the dynamics of an elliptical cavity and the stability of a circular cavity under biaxial stress, including the effects of surface stress. △ Less

Submitted 27 August, 2003; v1 submitted 4 December, 2002; originally announced December 2002.

Comments: 4 pages, 3 figures