Showing 1–9 of 9 results for author: Herranz, J

Composition and optical properties of (In,Ga)As nanowires grown by group-III-assisted molecular beam epitaxy

Authors: M Gómez Ruiz, Aron Castro, Jesús Herranz, Alessandra da Silva, Achim Trampert, Oliver Brandt, Lutz Geelhaar, Jonas Lähnemann

Abstract: (In,Ga) alloy droplets are used to catalyse the growth of (In,Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In,Ga)As nanow… ▽ More (In,Ga) alloy droplets are used to catalyse the growth of (In,Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In,Ga)As nanowires for an In/(In+Ga) flux ratio of 0.8. However, with increasing In/(In+Ga) fl ux ratio, the nanowire length and diameter are notably reduced. Using photoluminescence and cathodoluminescence spectroscopy on nanowires covered by a passivating (In,Al)As shell, two luminescence bands are observed. A significant segment of the nanowires shows homogeneous emission, with a wavelength corresponding to the In content in this segment, while the consumption of the catalyst droplet leads to a spectrally-shifted emission band at the top of the nanowires. The (In,Ga)As nanowires studied in this work provide a new approach for the integration of infrared emitters on Si platforms. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Journal ref: Nanotechnology 35, 265702 (2024)

Bismuth surfactant-enhanced III-As epitaxy on GaAs(111)A

Authors: Ahmed M. Hassanen, Jesus Herranz, Lutz Geelhaar, Ryan B. Lewis

Abstract: Quantum dot (QD) growth on high ($c_{3v}$) symmetry GaAs{111} surfaces holds promise for efficient entangled photon sources. Unfortunately, homoepitaxy on GaAs{111} surfaces suffers from surface roughness/defects and InAs deposition does not natively support Stranski-Krastanov (SK) QD growth. Surfactants have been identified as effective tools to alter the epitaxial growth process of III-V materia… ▽ More Quantum dot (QD) growth on high ($c_{3v}$) symmetry GaAs{111} surfaces holds promise for efficient entangled photon sources. Unfortunately, homoepitaxy on GaAs{111} surfaces suffers from surface roughness/defects and InAs deposition does not natively support Stranski-Krastanov (SK) QD growth. Surfactants have been identified as effective tools to alter the epitaxial growth process of III-V materials, however, their use remains unexplored on GaAs{111}. Here, we investigate Bi as a surfactant in III-As molecular beam epitaxy (MBE) on GaAs(111)A substrates, demonstrating that Bi can eliminate surface defects/hillocks in GaAs and (Al,Ga)As layers, yielding atomically-smooth hillock-free surfaces with RMS roughness values as low as 0.13 nm. Increasing Bi fluxes are found to result in smoother surfaces and Bi is observed to increase adatom diffusion. The Bi surfactant is also shown to trigger a morphological transition in InAs/GaAs(111)A films, directing the 2D InAs layer to rearrange into 3D nanostructures, which are promising candidates for high-symmetry quantum dots. The desorption activation energy ($U_{Des}$) of Bi on GaAs(111)A was measured by reflection high energy electron diffraction (RHEED), yielding $U_{Des}$ = 1.7 $\pm$ 0.4 eV. These results illustrate the potential of Bi surfactants on GaAs(111)A and will help pave the way for GaAs(111)A as a platform for technological applications including quantum photonics. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Comments: 9 pages, 4 figures

Carrier Recombination in Highly Uniform and Phase-Pure GaAs/(Al,Ga)As Core/Shell Nanowire Arrays on Si(111): Mott Transition and Internal Quantum Efficiency

Authors: Miriam Oliva, Timur Flissikowski, Michał Góra, Jonas Lähnemann, Jesús Herranz, Ryan B. Lewis, Oliver Marquardt, Manfred Ramsteiner, Lutz Geelhaar, Oliver Brandt

Abstract: GaAs-based nanowires are among the most promising candidates for realizing a monolithical integration of III-V optoelectronics on the Si platform. To realize their full potential for applications as light absorbers and emitters, it is crucial to understand their interaction with light governing the absorption and extraction efficiency, as well as the carrier recombination dynamics determining the… ▽ More GaAs-based nanowires are among the most promising candidates for realizing a monolithical integration of III-V optoelectronics on the Si platform. To realize their full potential for applications as light absorbers and emitters, it is crucial to understand their interaction with light governing the absorption and extraction efficiency, as well as the carrier recombination dynamics determining the radiative efficiency. Here, we study the spontaneous emission of zincblende GaAs/(Al,Ga)As core/shell nanowire arrays by $μ$-photoluminescence spectroscopy. These ordered arrays are synthesized on patterned Si(111) substrates using molecular beam epitaxy, and exhibit an exceptionally low degree of polytypism for interwire separations exceeding a critical value. We record emission spectra over more than five orders of excitation density for both steady-state and pulsed excitation to identify the nature of the recombination channels. An abrupt Mott transition from excitonic to electron-hole-plasma recombination is observed, and the corresponding Mott density is derived. Combining these experiments with simulations and additional direct measurements of the external quantum efficiency using a perfect diffuse reflector as reference, we are able to extract the internal quantum efficiency as a function of carrier density and temperature as well as the extraction efficiency of the nanowire array. The results vividly document the high potential of GaAs/(Al,Ga)As core/shell nanowires for efficient light emitters integrated on the Si platform. Furthermore, the methodology established in this work can be applied to nanowires of any other materials system of interest for optoelectronic applications. △ Less

Submitted 30 November, 2022; originally announced November 2022.

Journal ref: ACS Appl. Nano Mater. 6, 15278-15293 (2023)

Beam damage of single semiconductor nanowires during X-ray nano beam diffraction experiments

Authors: Ali AlHassan, Jonas Lähnemann, Arman Davtyan, Mahmoud Al-Humaidi, Jesús Herranz, Danial Bahrami, Taseer Anjum, Florian Bertram, Arka Bikash Dey, Lutz Geelhaar, Ullrich Pietsch

Abstract: Nanoprobe X-ray diffraction (nXRD) using focused synchrotron radiation is a powerful technique to study the structural properties of individual semiconductor nanowires. However, when performing the experiment under ambient conditions, the required high X-ray dose and prolonged exposure times can lead to radiation damage. To unveil the origin of radiation damage, we compare nXRD experiments carried… ▽ More Nanoprobe X-ray diffraction (nXRD) using focused synchrotron radiation is a powerful technique to study the structural properties of individual semiconductor nanowires. However, when performing the experiment under ambient conditions, the required high X-ray dose and prolonged exposure times can lead to radiation damage. To unveil the origin of radiation damage, we compare nXRD experiments carried out on individual semiconductor nanowires in their as grown geometry both under ambient conditions and under He atmosphere at the microfocus station of the P08 beamline at the 3rd generation source PETRA III. Using an incident X-ray beam energy of 9 keV and photon flux of 10$^{10}$s$^{-1}$, the axial lattice parameter and tilt of individual GaAs/In$_{0.2}$Ga$_{0.8}$As/GaAs core-shell nanowires were monitored by continuously recording reciprocal space maps of the 111 Bragg reflection at a fixed spatial position over several hours. In addition, the emission properties of the (In,Ga)As quantum well, the atomic composition of the exposed nanowires and the nanowire morphology are studied by cathodoluminescence spectroscopy, energy dispersive X-ray spectroscopy and scanning electron microscopy, respectively, both prior to and after nXRD exposure. Nanowires exposed under ambient conditions show severe optical and morphological damage, which was reduced for nanowires exposed under He atmosphere. The observed damage can be largely attributed to an oxidation process from X-ray induced ozone reactions in air. Due to the lower heat transfer coefficient compared to GaAs, this oxide shell limits the heat transfer through the nanowire side facets, which is considered as the main channel of heat dissipation for nanowires in the as-grown geometry. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Journal ref: Journal of Synchrotron Radiation 27, 1200 (2020)

Coaxial GaAs/(In,Ga)As dot-in-a-well nanowire heterostructures for electrically driven infrared light generation on Si in the telecommunication O band

Authors: Jesús Herranz, Pierre Corfdir, Esperanza Luna, Uwe Jahn, Ryan B. Lewis, Lutz Schrottke, Jonas Lähnemann, Abbes Tahraoui, Achim Trampert, Oliver Brandt, Lutz Geelhaar

Abstract: Core-shell GaAs-based nanowires monolithically integrated on Si constitute a promising class of nanostructures that could enable light emitters for fast inter- and intrachip optical connections. We introduce and fabricate a novel coaxial GaAs/(In,Ga)As dot-in-a-well nanowire heterostructure to reach spontaneous emission in the Si transparent region, which is crucial for applications in Si photonic… ▽ More Core-shell GaAs-based nanowires monolithically integrated on Si constitute a promising class of nanostructures that could enable light emitters for fast inter- and intrachip optical connections. We introduce and fabricate a novel coaxial GaAs/(In,Ga)As dot-in-a-well nanowire heterostructure to reach spontaneous emission in the Si transparent region, which is crucial for applications in Si photonics. Specifically, we achieve room temperature emission at 1.27 $μ$m in the telecommunication O band. The presence of quantum dots in the heterostructure is evidenced by a structural analysis based on scanning transmission electron microscopy. The spontaneous emission of these nanowire structures is investigated by cathodoluminescence and photoluminescence spectroscopy. Thermal redistribution of charge carriers to larger quantum dots explains the long wavelength emission achieved at room temperature. Finally, in order to demonstrate the feasibility of the presented nanowire heterostructures as electrically driven light emitters monolithically integrated on Si, a light emitting diode is fabricated exhibiting room-temperature electroluminescence at 1.26 $μ$m. △ Less

Submitted 18 December, 2019; v1 submitted 27 August, 2019; originally announced August 2019.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in ACS Applied Nano Materials (2019), copyright (C) American Chemical Society after peer review. To access the final edited and published work see this https://doi.org/10.1021/acsanm.9b01866, the supporting information is available (free of charge) under the same link

Journal ref: ACS Applied Nano Materials 3, 165 (2020)

Bismuth-surfactant-induced growth and structure of InAs/GaAs(110) quantum dots

Authors: Ryan B. Lewis, Achim Trampert, Esperanza Luna, Jesús Herranz, Carsten Pfüller, Lutz Geelhaar

Abstract: We explore the Bi-surfactant-directed self-assembly and structure of InAs quantum dots grown on GaAs(110) by molecular beam epitaxy. The addition of a Bi flux during InAs deposition changes the InAs growth mode from two-dimensional (2D) Frank-van der Merwe to Stranski-Krastanov, resulting in the formation of three-dimensional (3D) InAs islands on the surface. Furthermore, exposing static InAs 2D l… ▽ More We explore the Bi-surfactant-directed self-assembly and structure of InAs quantum dots grown on GaAs(110) by molecular beam epitaxy. The addition of a Bi flux during InAs deposition changes the InAs growth mode from two-dimensional (2D) Frank-van der Merwe to Stranski-Krastanov, resulting in the formation of three-dimensional (3D) InAs islands on the surface. Furthermore, exposing static InAs 2D layers to Bi induces a rearrangement of the strained layer into 3D islands. We explore the effect of varying the InAs thickness and Bi flux for these two growth approaches, observing a critical thickness for 3D island formation in both cases. Characterization of (110) InAs quantum dots with high-resolution transmission electron microscopy reveals that larger islands grown by the Stranski-Krastanov mode are plastically relaxed, while small islands grown by the on-demand approach are coherent. Strain relaxation along the [1-10] direction is achieved by 90 degree pure-edge dislocations with dislocation lines running along [001]. In contrast, strain relief along [001] is by 60 degree misfit dislocations. This behaviour is consistent with observations of planar (In,Ga)As/GaAs(110) layers. These results illustrate how surfactant Bi can provoke and control quantum dot formation where it normally does not occur. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Correlated nanoscale analysis of the emission from wurtzite versus zincblende (In,Ga)As/GaAs nanowire core-shell quantum wells

Authors: Jonas Lähnemann, Megan O. Hill, Jesús Herranz, Oliver Marquardt, Guanhui Gao, Ali Al Hassan, Arman Davtyan, Stephan O. Hruszkewycz, Martin V. Holt, Chunyi Huang, Irene Calvo-Almazán, Uwe Jahn, Ullrich Pietsch, Lincoln J. Lauhon, Lutz Geelhaar

Abstract: While the properties of wurtzite GaAs have been extensively studied during the past decade, little is known about the influence of the crystal polytype on ternary (In,Ga)As quantum well structures. We address this question with a unique combination of correlated, spatially-resolved measurement techniques on core-shell nanowires that contain extended segments of both the zincblende and wurtzite pol… ▽ More While the properties of wurtzite GaAs have been extensively studied during the past decade, little is known about the influence of the crystal polytype on ternary (In,Ga)As quantum well structures. We address this question with a unique combination of correlated, spatially-resolved measurement techniques on core-shell nanowires that contain extended segments of both the zincblende and wurtzite polytypes. Cathodoluminescence hyperspectral imaging reveals a blueshift of the quantum well emission energy by $75\pm15$ meV in the wurtzite polytype segment. Nanoprobe x-ray diffraction and atom probe tomography enable $\mathbf{k}\cdot\mathbf{p}$ calculations for the specific sample geometry to reveal two comparable contributions to this shift. First, there is a 30% drop in In mole fraction going from the zincblende to the wurtzite segment. Second, the quantum well is under compressive strain, which has a much stronger impact on the hole ground state in the wurtzite than in the zincblende segment. Our results highlight the role of the crystal structure in tuning the emission of (In,Ga)As quantum wells and pave the way to exploit the possibilities of three-dimensional bandgap engineering in core-shell nanowire heterostructures. At the same time, we have demonstrated an advanced characterization toolkit for the investigation of semiconductor nanostructures. △ Less

Submitted 8 August, 2019; v1 submitted 18 March, 2019; originally announced March 2019.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters (2019), copyright (C) American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.nanolett.9b01241, the supporting information is available (free of charge) under the same link

Journal ref: Nano Lett. 19, 4448 (2019)

Self-assembly of InAs nanostructures on the sidewalls of GaAs nanowires directed by a Bi surfactant

Authors: Ryan B. Lewis, Pierre Corfdir, Jesús Herranz, Hanno Küpers, Uwe Jahn, Oliver Brandt, Lutz Geelhaar

Abstract: Surface energies play a dominant role in the self-assembly of three dimensional (3D) nanostructures. In this letter, we show that using surfactants to modify surface energies can provide a means to externally control nanostructure self-assembly, enabling the synthesis of novel hierarchical nanostructures. We explore Bi as a surfactant in the growth of InAs on the {1-10} sidewall facets of GaAs nan… ▽ More Surface energies play a dominant role in the self-assembly of three dimensional (3D) nanostructures. In this letter, we show that using surfactants to modify surface energies can provide a means to externally control nanostructure self-assembly, enabling the synthesis of novel hierarchical nanostructures. We explore Bi as a surfactant in the growth of InAs on the {1-10} sidewall facets of GaAs nanowires. The presence of surface Bi induces the formation of InAs 3D islands by a process resembling the Stranski-Krastanov mechanism, which does not occur in the absence of Bi on these surfaces. The InAs 3D islands nucleate at the corners of the {1-10} facets above a critical shell thickness and then elongate along <110> directions in the plane of the nanowire sidewalls. Exploiting this growth mechanism, we realize a series of novel hierarchical nanostructures, ranging from InAs quantum dots on single {1-10} nanowire facets to zig-zag shaped nanorings completely encircling nanowire cores. Photoluminescence spectroscopy and cathodoluminescence spectral line scans reveal that small surfactant-induced InAs 3D islands behave as optically active quantum dots. This work illustrates how surfactants can provide an unprecedented level of external control over nanostructure self-assembly. △ Less

Submitted 26 April, 2017; originally announced April 2017.

Comments: 12 pages, 4 figures

Journal ref: Nano Lett. 2017, 17, 4255-4260

Quantum dot self-assembly driven by a surfactant-induced morphological instability

Authors: Ryan B. Lewis, Pierre Corfdir, Hong Li, Jesús Herranz, Carsten Pfüller, Oliver Brandt, Lutz Geelhaar

Abstract: In strained heteroepitaxy, two-dimensional (2D) layers can exhibit a critical thickness at which three-dimensional (3D) islands self-assemble, relieving misfit strain at the cost of an increased surface area. Here we show that such a morphological phase transition can be induced on-demand using surfactants. We explore Bi as a surfactant in the growth of InAs on GaAs(110), and find that the presenc… ▽ More In strained heteroepitaxy, two-dimensional (2D) layers can exhibit a critical thickness at which three-dimensional (3D) islands self-assemble, relieving misfit strain at the cost of an increased surface area. Here we show that such a morphological phase transition can be induced on-demand using surfactants. We explore Bi as a surfactant in the growth of InAs on GaAs(110), and find that the presence of surface Bi induces Stranski-Krastanov growth of 3D islands, while growth without Bi always favors 2D layer formation. Exposing a static two monolayer thick InAs layer to Bi rapidly transforms the layer into 3D islands. Density functional theory calculations reveal that Bi reduces the energetic cost of 3D island formation by modifying surface energies. These 3D nanostructures behave as optically active quantum dots. This work illustrates how surfactants can enable quantum dot self-assembly where it otherwise would not occur. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. Lett. 119, 086101 (2017)