Showing 1–8 of 8 results for author: Hempel, H

Efficient broadband terahertz generation by above band-gap excitation of the pyroelectric ZnSnN2

Authors: T. S. Seifert, H. Hempel, O. Gückstock, R. Schneider, Q. Remy, A. Fioretti, T. Unold, S. Michaelis de Vasconcellos, R. Bratschitsch, R. Eichberger, K. Dörr, A. Zakutayev, T. Kampfrath

Abstract: Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN2, and find that above-band-gap excitation results in the efficient formation of an ultrafast photoc… ▽ More Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN2, and find that above-band-gap excitation results in the efficient formation of an ultrafast photocurrent generating THz radiation. The resulting THz electric field spans a frequency range from below 1 to above 30 THz. Our results suggest that the photocurrent is primarily driven by an ultrafast pyroelectric effect where the photo-excited carriers screen the spontaneous electric polarization of ZnSnN2. Strong structural disorder reduces the photocarrier lifetime significantly and, thus, enables broadband operation. ZnSnN2 shows similar THz-emitter performance as the best spintronic THz emitters regarding bandwidth and amplitude. Our study unveils the large potential of pyroelectric materials as efficient and broadband THz emitters with built-in bias fields. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Phenothiazine-Based Self-Assembled Monolayer with Thiophene Head Groups Minimizes Buried Interface Losses in Tin Perovskite Solar Cells

Authors: Valerio Stacchini, Madineh Rastgoo, Mantas Marčinskas, Chiara Frasca, Kazuki Morita, Lennart Frohloff, Antonella Treglia, Orestis Karalis, Vytautas Getautis, Annamaria Petrozza, Norbert Koch, Hannes Hempel, Tadas Malinauskas, Antonio Abate, Artem Musiienko

Abstract: Self-assembled monolayers (SAMs) have revolutionized the fabrication of lead-based perovskite solar cells, but they remain underexplored in tin perovskite systems. PEDOT is the material of choice for hole-selective layers in tin perovskite solar cells (TPSCs), but presents challenges for both performance and stability. MeO-2PACz, the only SAM reported for Sn perovskites, enables device fabrication… ▽ More Self-assembled monolayers (SAMs) have revolutionized the fabrication of lead-based perovskite solar cells, but they remain underexplored in tin perovskite systems. PEDOT is the material of choice for hole-selective layers in tin perovskite solar cells (TPSCs), but presents challenges for both performance and stability. MeO-2PACz, the only SAM reported for Sn perovskites, enables device fabrication but consistently underperforms when compared to PEDOT. In this work, we identify that MeO-2PACz's limitations arise from excessively strong interactions with perovskite surface and poor lattice matching, leading to poor interface quality. To overcome these issues, we design, synthesize, and characterize a novel SAM-forming molecule called Th-2EPT. Th-2EPT optimizes coordination strength and improves lattice compatibility, contributing to the creation of a high-quality buried interface and dramatically suppressing non-radiative recombination. We used Density Functional Theory (DFT) to evaluate coordination strength and lattice compatibility, complemented by nanosecond-resolution optical characterization techniques to confirm significantly reduced interfacial recombination and enhanced carrier lifetimes in Th-2EPT-Perovskite films. With Th-2EPT, we demonstrated the first SAM-based tin perovskite solar cells to outperform PEDOT-based devices, delivering a record power conversion efficiency (PCE) of 8.2% with a DMSO-free solvent system. △ Less

Submitted 12 February, 2025; originally announced February 2025.

Comments: Submitted

The Potential of Geminate Pairs in Lead Halide Perovskite revealed via Time-resolved Photoluminescence

Authors: Hannes Hempel, Martin Stolterfoht, Orestis Karalis, Thomas Unold

Abstract: Photoluminescence (PL) under continuous illumination is commonly employed to assess voltage losses in solar energy conversion materials. However, the early temporal evolution of these losses remains poorly understood. Therefore, we extend the methodology to time-resolved PL, introducing the concepts of geminate PL, doping PL, and sibling PL to quantify the transient chemical potential of photogene… ▽ More Photoluminescence (PL) under continuous illumination is commonly employed to assess voltage losses in solar energy conversion materials. However, the early temporal evolution of these losses remains poorly understood. Therefore, we extend the methodology to time-resolved PL, introducing the concepts of geminate PL, doping PL, and sibling PL to quantify the transient chemical potential of photogenerated electron-hole pairs and key optoelectronic properties. Analyzing the initial PL amplitudes reveals hot charge carrier separation for around 100 nm and is likely limited by the grain size of the triple cation perovskite. The following PL decay is caused by the diffusive separation of non-excitonic geminate pairs and time-resolves a fundamental yet often overlooked energy loss by increasing entropy. For triple-cation halide perovskite, we measure a "geminate correlation energy" of up to 90 meV, persisting for ~ten nanoseconds. This energy is unutilized in standard solar cells and is considered lost in the Shockley-Queisser model. Therefore, this geminate energy could substantially enhance the device's efficiency, particularly under maximum power point and low-illumination conditions. △ Less

Submitted 10 September, 2024; originally announced September 2024.

Comments: 16 pages (+ 16 pages SI), 4 figures (+ 5 figures SI)

Revealing the doping density in perovskite solar cells and its impact on device performance

Authors: Francisco Peña-Camargo, Jarla Thiesbrummel, Hannes Hempel, Artem Musiienko, Vincent M. Le Corre, Jonas Diekmann, Jonathan Warby, Thomas Unold, Felix Lang, Dieter Neher, Martin Stolterfoht

Abstract: Traditional inorganic semiconductors can be electronically doped with high precision. Conversely, there is still conjecture regarding the assessment of the electronic doping density in metal-halide perovskites, not to mention of a control thereof. This paper presents a multifaceted approach to determine the electronic doping density for a range of different lead-halide perovskite systems. Optical… ▽ More Traditional inorganic semiconductors can be electronically doped with high precision. Conversely, there is still conjecture regarding the assessment of the electronic doping density in metal-halide perovskites, not to mention of a control thereof. This paper presents a multifaceted approach to determine the electronic doping density for a range of different lead-halide perovskite systems. Optical and electrical characterisation techniques comprising intensity-dependent and transient photoluminescence, AC Hall effect, transfer-length-methods, and charge extraction measurements were instrumental in quantifying an upper limit for the doping density. The obtained values are subsequently compared to the charge on the electrodes per unit volume at short-circuit conditions, which amounts to roughly $10^{16}$ cm$^{-3}$. This figure equals the product of the capacitance $C$ and the built-in potential $V_\mathrm{bi}$ and represents the critical limit below which doping-induced charges do not influence the device performance. The experimental results demonstrate consistently that the doping density is below this critical threshold ($<10^{12}$ cm$^{-3}$ which means $<CV_\mathrm{bi}$ per unit volume) for all common lead-based metal-halide perovskites. Nevertheless, although the density of doping-induced charges is too low to redistribute the built-in voltage in the perovskite active layer, mobile ions are present in sufficient quantities to create space-charge-regions in the active layer, reminiscent of doped pn-junctions. These results are well supported by drift-diffusion simulations which confirm that the device performance is not affected by such low doping densities. △ Less

Submitted 14 January, 2022; originally announced January 2022.

Boron phosphide films by reactive sputtering: Searching for a p-type transparent conductor

Authors: Andrea Crovetto, Jesse M. Adamczyk, Rekha R. Schnepf, Craig L. Perkins, Hannes Hempel, Sage R. Bauers, Eric S. Toberer, Adele C. Tamboli, Thomas Unold, Andriy Zakutayev

Abstract: With an indirect band gap in the visible and a direct band gap at a much higher energy, boron phosphide (BP) holds promise as an unconventional p-type transparent conductor. Previous experimental reports deal almost exclusively with epitaxial, nominally undoped BP films by chemical vapor deposition. High hole concentrations were often observed, but it is unclear if native defects alone can be resp… ▽ More With an indirect band gap in the visible and a direct band gap at a much higher energy, boron phosphide (BP) holds promise as an unconventional p-type transparent conductor. Previous experimental reports deal almost exclusively with epitaxial, nominally undoped BP films by chemical vapor deposition. High hole concentrations were often observed, but it is unclear if native defects alone can be responsible for it. Besides, the feasibility of alternative deposition techniques has not been clarified and optical characterization is generally lacking. In this work, we demonstrate reactive sputtering of amorphous BP films, their partial crystallization in a P-containing annealing atmosphere, and extrinsic doping by C and Si. We obtain the highest hole concentration reported to date for p-type BP ($5 \times 10^{20}$ cm$^{-3}$) using C doping under B-rich conditions. We also confirm that bipolar doping is possible in BP. An anneal temperature of at least 1000 $^\circ$C is necessary for crystallization and dopant activation. Hole mobilities are low and indirect optical transitions are much stronger than predicted by theory. Low crystalline quality probably plays a role in both cases. High figures of merit for transparent conductors might be achievable in extrinsically doped BP films with improved crystalline quality. △ Less

Submitted 15 December, 2021; v1 submitted 14 December, 2021; originally announced December 2021.

Water adsorption enhances electrical conductivity in transparent p-type CuI

Authors: Andrea Crovetto, Hannes Hempel, Marin Rusu, Leo Choubrac, Danny Kojda, Klaus Habicht, Thomas Unold

Abstract: CuI has been recently rediscovered as a p-type transparent conductor with a high figure of merit. Even though many metal iodides are hygroscopic, the effect of moisture on the electrical properties of CuI has not been clarified. In this work, we observe a two-fold increase in the conductivity of CuI after exposure to ambient humidity for 5 hours, followed by slight long-term degradation. Simultane… ▽ More CuI has been recently rediscovered as a p-type transparent conductor with a high figure of merit. Even though many metal iodides are hygroscopic, the effect of moisture on the electrical properties of CuI has not been clarified. In this work, we observe a two-fold increase in the conductivity of CuI after exposure to ambient humidity for 5 hours, followed by slight long-term degradation. Simultaneously, the work function of CuI decreases by almost 1 eV, which can explain the large spread in the previously reported work function values. The conductivity increase is partially reversible and is maximized at intermediate humidity levels. Based on the large intra-grain mobility measured by THz spectroscopy, we suggest that hydration of grain boundaries may be beneficial for the overall hole mobility. △ Less

Submitted 17 June, 2020; originally announced June 2020.

Mechanochemical Synthesis of the Lead-Free Double Perovskite Cs2[AgIn]Br6 and its Optical Properties

Authors: Joachim Breternitz, Sergiu Levcenko, Hannes Hempel, Galina Gurieva, Alexandra Franz, Andreas Hoser, Susan Schorr

Abstract: Hitting hard on the binary halides yields in the formation of Cs2[AgIn]Br6. The lead-free double perovskite marks, although not usable itself, a further step forward in finding sustainable and durable perovskite materials for photovoltaic applications. Cs2[AgIn]Br6 is one of the prominent examples of double perovskites materials that have been suggested to circumvent the use of lead compounds in p… ▽ More Hitting hard on the binary halides yields in the formation of Cs2[AgIn]Br6. The lead-free double perovskite marks, although not usable itself, a further step forward in finding sustainable and durable perovskite materials for photovoltaic applications. Cs2[AgIn]Br6 is one of the prominent examples of double perovskites materials that have been suggested to circumvent the use of lead compounds in perovskite solar cells. We herein report the successful synthesis of the material using a mechanochemical approach. It crystallizes in an elpasolite-type structure, an ordered perovskite superstructure, with a cell parameter of a = 11.00 Å. However, the compound exhibits a relatively large optical bandgap of 2.36 eV and is unstable under illumination, which impedes its use as solar absorber material at this early stage. Still, substitution of lead and the potential of this synthesis method are promising as well as the fruitful combination of theoretical considerations with experimental materials discovery. △ Less

Submitted 26 October, 2018; originally announced October 2018.

Effects of disorder on carrier transport in Cu$_2$SnS$_3$

Authors: Lauryn L. Baranowski, Kevin McLaughlin, Pawel Zawadzki, Stephan Lany, Andrew Norman, Hannes Hempel, Rainer Eichberger, Thomas Unold, Eric S. Toberer, Andriy Zakutayev

Abstract: In recent years, further improvements in the efficiency of Cu$_2$ZnSn(S,Se)$_4$ photovoltaic devices have been hampered due to several materials issues, including cation disorder. Cu$_2$SnS$_3$ is a promising new absorber material that has attracted significant interest in recent years. However, similar to CZTS, Cu$_2$SnS$_3$ displays cation disorder. In this work, we develop synthetic techniques… ▽ More In recent years, further improvements in the efficiency of Cu$_2$ZnSn(S,Se)$_4$ photovoltaic devices have been hampered due to several materials issues, including cation disorder. Cu$_2$SnS$_3$ is a promising new absorber material that has attracted significant interest in recent years. However, similar to CZTS, Cu$_2$SnS$_3$ displays cation disorder. In this work, we develop synthetic techniques to control the disorder in Cu$_2$SnS$_3$ thin films. By manipulating the disorder in this material, we observe crystal structure changes and detect improvements in the majority carrier (hole) transport. However, when the minority carrier (electron) transport was investigated using optical pump terahertz probe spectroscopy, minimal differences were observed between the ordered and disordered Cu$_2$SnS$_3$. By combining these results with first-principles and Monte Carlo theoretical calculations, we are able to conclude that even ostensibly "ordered" Cu$_2$SnS$_3$ displays minority carrier transport properties corresponding to the disordered structure. The presence of extended planar defects in all samples, observed in TEM imaging, suggests that disorder is present even when it is not detectable using traditional structural characterization methods. The results of this study highlight some of the challenges to the further improvement of Cu$_2$SnS$_3$-based photovoltaics, and have implications for other disordered multinary semiconductors such as CZTS. △ Less

Submitted 6 April, 2015; originally announced April 2015.