Showing 1–4 of 4 results for author: Helms, B A

Operando Ultrafast Damage-free Diffraction-Enhanced X-ray Absorption Spectroscopy for Chemical Reactivity of Polymer in Solvents

Authors: Zhengxing Peng, Antoine Lainé, Ka Chon Ng, Mutian Hua, Brett A. Helms, Miquel B. Salmeron, Cheng Wang

Abstract: Chemical recycling of plastics to its constituent monomers is a promising solution to develop a sustainable circular plastic economy. An in-situ X-ray absorption spectra (XAS) characterization is an important way to understand the deconstruction process. However, radiation damage, and long acquisition time, prevent such characterization for fast chemical process. Here, we present a novel experimen… ▽ More Chemical recycling of plastics to its constituent monomers is a promising solution to develop a sustainable circular plastic economy. An in-situ X-ray absorption spectra (XAS) characterization is an important way to understand the deconstruction process. However, radiation damage, and long acquisition time, prevent such characterization for fast chemical process. Here, we present a novel experimental technique, which we name Diffraction-Enhanced X-ray Absorption Spectroscopy (DE-XAS), where the plastic material is supported on a graphene layer covering a periodic pattern of holes in a perforated SiNx membrane. The XAS is obtained by measuring the energy-dependent intensity of the X-ray diffracted beams going through the plastic film over the holes in the SiNx membrane. Our method decreases beam damage by orders of magnitude while providing good signal/noise ratio data. We demonstrate the suppression of beam damage with samples of polymethyl methacrylate (PMMA) and the operando characterization of polymer deconstruction process in acid with polydiketoenamine (PDK). This proof-of-concept of the DE-XAS technique shows its great potential for studying fast chemical processes, picoseconds to nanoseconds, using fast CCD detectors with short readout time. We believe the DE-XAS technique offers opportunities for studies of chemical reactions, e.g., photoresist, and many others. △ Less

Submitted 30 September, 2024; originally announced October 2024.

Comments: This content is a preprint and has not undergone peer review at the time of posting

Harnessing Structural and Dynamic Heterogeneity to Direct Ion Transport in Plastic Crystal-Polymer Composite Solid-Ion Conductors

Authors: Ankit Agrawal, Yierpan Aierken, Meiling Sun, Ethan J. Crumlin, David Prendergast, Brett A. Helms

Abstract: Solid-ion conductors (SICs) comprising non-ionic plastic crystals and lithium salts often require compositing with polymers to render them processable for use in solid-state lithium-metal batteries. Here, we show that polymer-doped plastic crystal SICs form a previously unrecognized plastic crystal-polymer high entropy interphase, where ions selectively partition and exhibit a higher fraction of m… ▽ More Solid-ion conductors (SICs) comprising non-ionic plastic crystals and lithium salts often require compositing with polymers to render them processable for use in solid-state lithium-metal batteries. Here, we show that polymer-doped plastic crystal SICs form a previously unrecognized plastic crystal-polymer high entropy interphase, where ions selectively partition and exhibit a higher fraction of matrix-separated ion pairs than in the bulk. Liithium ion diffusivity in this interphase is an order of magnitude higher than in other microenvironments due to an increase in the molar volume of the plastic crystal in the vicinity of the polymer, which increases the frequency of bond rotation in the plastic crystal required for ion conduction. Surprisingly, the polymer does not directly participate in ion transport. These insights led us to prepare SICs from specific polymers, plastic crystals, and lithium halide salts that concomitantly deliver fast ion conduction at ambient and sub-ambient temperatures and sustainable passivation of the lithium anode. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Diversity-Oriented Synthesis of Polymers of Intrinsic Microporosity with Explicit Solid Solvation Cages for Lithium Ions

Authors: Miranda J. Baran, Mark E. Carrington, Swagat Sahu, Artem Baskin, Junhua Song, Michael A. Baird, Simon J. Teat, Stephen M. Meckler, Chengyin Fu, David Prendergast, Brett A. Helms

Abstract: Here, we describe a diversity-oriented synthetic strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions. Lead candidate membranes featuring such ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional… ▽ More Here, we describe a diversity-oriented synthetic strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions. Lead candidate membranes featuring such ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome. Such membranes show promise as dendrite-suppressing anode-electrolyte interlayers in high-voltage lithium-metal batteries for electric mobility. △ Less

Submitted 26 December, 2019; originally announced December 2019.

Universal Chemomechanical Design Rules for Solid-Ion Conductors to Prevent Dendrite Formation in Lithium Metal Batteries

Authors: Chengyin Fu, Victor Venturi, Zeeshan Ahmad, Andrew W. Ells, Venkatasubramanian Viswanathan, Brett A. Helms

Abstract: Dendrite formation during electrodeposition while charging lithium metal batteries compromises their safety. While high shear modulus solid-ion conductors (SICs) have been prioritized to resolve pressure-driven instabilities that lead to dendrite propagation and cell shorting, it is unclear whether these or alternatives are needed to guide uniform lithium electrodeposition, which is intrinsically… ▽ More Dendrite formation during electrodeposition while charging lithium metal batteries compromises their safety. While high shear modulus solid-ion conductors (SICs) have been prioritized to resolve pressure-driven instabilities that lead to dendrite propagation and cell shorting, it is unclear whether these or alternatives are needed to guide uniform lithium electrodeposition, which is intrinsically density-driven. Here, we show that SICs can be designed within a universal chemomechanical paradigm to access either pressure-driven dendrite-blocking or density-driven dendrite-suppressing properties, but not both. This dichotomy reflects the competing influence of the SICs mechanical properties and partial molar volume of Li+ relative to those of the lithium anode on plating outcomes. Within this paradigm, we explore SICs in a previously unrecognized dendrite-suppressing regime that are concomitantly soft, as is typical of polymer electrolytes, but feature atypically low Li+ partial molar volume, more reminiscent of hard ceramics. Li plating mediated by these SICs is uniform, as revealed using synchrotron hard x-ray microtomography. As a result, cell cycle-life is extended, even when assembled with thin Li anodes and high-voltage NMC-622 cathodes, where 20 percent of the Li inventory is reversibly cycled. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Journal ref: Nature Materials, 19, 758-766 (2020)