Showing 1–5 of 5 results for author: Haviar, S

Ultra-low-resistivity nitrogen-doped p-type Cu2O thin films fabricated by reactive HiPIMS

Authors: Jiří Rezek, Jan Koloros, Jiří Houška, Radomír Čerstvý, Stanislav Haviar, Jemal Yimer Damte, David Kolenatý, Pavel Baroch

Abstract: We have successfully fabricated the nitrogen-doped cuprous oxide thin films on the amorphous standard soda-lime glass by reactive high-power impulse magnetron sputtering. The energy of film-forming particles was controlled by the value of pulse-averaged target power density, which has a significant impact on the elemental composition, structure and optoelectrical properties of the films. We have s… ▽ More We have successfully fabricated the nitrogen-doped cuprous oxide thin films on the amorphous standard soda-lime glass by reactive high-power impulse magnetron sputtering. The energy of film-forming particles was controlled by the value of pulse-averaged target power density, which has a significant impact on the elemental composition, structure and optoelectrical properties of the films. We have shown that the high-energy regime is more suitable for preserving Cu2O structure and leads to continuous substitution of oxygen by nitrogen compared with the low-energy regime. Moreover, in the high-energy regime, it is possible, to some extent, to independently control the electrical resistivity and optical properties. The electrical resistivity decreases down to 5 x10-2 ohm.cm at the optical band gap 2.0-2.3 eV. Special attention is paid to the formation of nitrogen molecules and their ability to form shallow acceptor states. Experimental results supported by our DFT calculations indicate that N2 replacing Cu in the Cu2O lattice is one possible (but not the only possible) acceptor. We have also found that the formation of nitrogen molecules is preferred in a high-energy regime. △ Less

Submitted 18 June, 2025; originally announced June 2025.

Thermally-induced microstructural evolution in nanoparticle-based CuO, WO$_3$ and CuO-WO$_3$ thin films for hydrogen gas sensing

Authors: Kalyani Shaji, Stanislav Haviar, Petr Zeman, Michal Procházka, Radomír Čerstvý, Nirmal Kumar, Jiří Čapek

Abstract: This study systematically investigates the microstructural evolution of nanoparticle-based CuO, WO$_3$, and composite 'CuO-WO$_3$' thin films induced by their post-deposition annealing. The films were reactively deposited using a magnetron-based gas aggregation technique, with the composite films consisting of alternating monolayers of CuO and WO$_3$ nanoparticles. After deposition, the films were… ▽ More This study systematically investigates the microstructural evolution of nanoparticle-based CuO, WO$_3$, and composite 'CuO-WO$_3$' thin films induced by their post-deposition annealing. The films were reactively deposited using a magnetron-based gas aggregation technique, with the composite films consisting of alternating monolayers of CuO and WO$_3$ nanoparticles. After deposition, the films were annealed in synthetic air at temperatures ranging from 200 to 400$^\circ$C and characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Annealing of the CuO films led to the most pronounced changes associated with a gradual enhancement of crystallinity accompanied by significant particle growth with increasing annealing temperature, while the WO$_3$ and CuO-WO$_3$ films were more thermally stable to crystallization and particle growth. Notably, at 400$^\circ$C, the CuO--WO$_3$ films crystallized into a novel $γ$-CuWO$_4$ phase. The annealed films were further evaluated for their gas-sensing performance upon H$_2$ exposure and the obtained results were analyzed in relation to film properties and the microstructural evolution induced by annealing. △ Less

Submitted 21 February, 2025; originally announced February 2025.

New polymorph γ-CuWO4 inspired by γ-CuMoO4: experimental identification and theoretical verification

Authors: Jiri Houska, Stanislav Haviar, Jiri Capek, Radomir Cerstvy, Kalyani Shaji, Nirmal Kumar, Petr Zeman

Abstract: In the context of our efforts to develop hydrogen gas sensors, two samples of ternary CuWO4 with the same crystalline structure have been prepared by two different non-equilibrium techniques. We show that the materials' structure is significantly different from the known stable one, and we identify that it is very similar to that of previously reported γ-CuMoO4. We use ab initio calculations to co… ▽ More In the context of our efforts to develop hydrogen gas sensors, two samples of ternary CuWO4 with the same crystalline structure have been prepared by two different non-equilibrium techniques. We show that the materials' structure is significantly different from the known stable one, and we identify that it is very similar to that of previously reported γ-CuMoO4. We use ab initio calculations to confirm that the newly identified phase, γ-CuWO4, represents a local energy minimum. We present very similar calculated and measured lattice constants and X-ray diffractograms. We make a case that the low-temperature formation of the metastable γ-CuWO4 phase is facilitated by easier kinetics and/or by Cu-rich composition of our samples, and we show that it converts to the stable phase after annealing to 600 °C. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Extraordinary oxidation behavior of W-Zr thin-film metallic glasses: A route for tailoring functional properties of W-Zr-O films

Authors: Petr Zeman, Michaela Červená, Jiří Houška, Stanislav Haviar, Jiří Rezek, Šárka Zuzjaková

Abstract: The oxidation behavior of W-Zr thin-film metallic glasses (TFMGs) with 32, 48 and 61 at.% Zr, prepared by dc magnetron co-sputtering, was comprehensively studied after annealing in synthetic air. The study focuses on the effect of the annealing temperature (up to 600°C) on the oxidation process, oxygen saturation, structure evolution, and their subsequent impact on electrical, optical and mechanic… ▽ More The oxidation behavior of W-Zr thin-film metallic glasses (TFMGs) with 32, 48 and 61 at.% Zr, prepared by dc magnetron co-sputtering, was comprehensively studied after annealing in synthetic air. The study focuses on the effect of the annealing temperature (up to 600°C) on the oxidation process, oxygen saturation, structure evolution, and their subsequent impact on electrical, optical and mechanical properties. The findings reveal that controlled oxidation transforms W-Zr TFMGs into amorphous ceramic W-Zr-O films with substoichiometric compositions. This is a consequence of an oxidation process that does not proceed through the formation of a stoichiometric oxide layer on the surface of W-Zr TFMGs, acting as a diffusion barrier against fast oxidation, but leads to a gradual incorporation of oxygen across the film volume due to thermodynamics factors. Higher Zr content accelerates the oxygen incorporation and its depth uniformity in the films. As a result, the mechanical properties are significantly enhanced achieving hardness values of up to 17.5 GPa at approximately 50% oxygen saturation. Simultaneously, the electrical and optical properties are finely tuned with the resistivity and the extinction coefficient (measured at 550 nm) ranging from 1.7 to 95.7x10-4 Ohm.cm and 0.28 to 1.06, respectively. △ Less

Submitted 20 December, 2024; originally announced December 2024.

A low-temperature synthesis of strongly thermochromic W and Sr co-doped VO2 films with a low transition temperature

Authors: Michal Kaufman, Jaroslav Vlcek, Jiri Houska, Sadoon Farrukh, Stanislav Haviar, Radomir Cerstvy, Tomas Kozak

Abstract: The reversible semiconductor-to-metal transition of vanadium dioxide (VO2) makes VO2-based coatings a promising candidate for thermochromic smart windows, reducing the energy consumption of buildings. We report low-temperature (320 degC) depositions of thermochromic V1-x-yWxSryO2 films with a thickness of 71-73 nm onto 170-175 nm thick Y-stabilized ZrO2 layers on a 1 mm thick conventional soda-lim… ▽ More The reversible semiconductor-to-metal transition of vanadium dioxide (VO2) makes VO2-based coatings a promising candidate for thermochromic smart windows, reducing the energy consumption of buildings. We report low-temperature (320 degC) depositions of thermochromic V1-x-yWxSryO2 films with a thickness of 71-73 nm onto 170-175 nm thick Y-stabilized ZrO2 layers on a 1 mm thick conventional soda-lime glass. The developed deposition technique is based on reactive high-power impulse magnetron sputtering with a pulsed O2 flow feedback control allowing us to prepare crystalline W and Sr co-doped VO2 films of the required stoichiometry without any substrate bias or post-deposition annealing. The W doping of VO2 decreases the transition temperature below 25 degC, while the Sr doping of VO2 increases the integral luminous transmittance, Tlum, significantly due to widening of the visible-range optical band gap, which is consistent with lowering of the absorption coefficient of films. We present the discussion of the effect of the Sr content in the metal sublattice of VO2 on the electronic and crystal structure of V1-x-yWxSryO2 films, and on their temperature-dependent optical and electrical properties. An optimized V0.855W0.018Sr0.127O2 film exhibits a high Tlum = 56.8% and modulation of the solar energy transmittance deltaTsol = 8.3%, which are 1.50 times and 1.28 times, respectively, higher compared with those of the V0.984W0.016O2 film. The achieved results constitute an important step toward a low-temperature synthesis of large-area thermochromic VO2-based coatings for future smart-window applications, as it is easy to further increase the Tlum and deltaTsol by >6% and >3%, respectively, using a 280 nm thick top SiO2 antireflection layer. △ Less

Submitted 5 November, 2024; originally announced November 2024.