-
Metal (boro-) hydrides for high energy density storage and relevant emerging technologies
Authors:
L. J. Bannenberg,
M. Heere,
H. Benzidi,
J. Montero,
E. M. Dematteis,
S. Suwarno,
T. Jaroń,
M. Winny,
P. A. Orłowski,
W. Wegner,
A. Starobrat,
K. J. Fijałkowski,
W. Grochala,
Z. Qian,
J. -P. Bonnet,
I. Nuta,
W. Lohstroh,
C. Zlotea,
O. Mounkachi,
F. Cuevas,
C. Chatillon,
M. Latroche,
M. Fichtner,
M. Baricco,
B. C. Hauback
, et al. (1 additional authors not shown)
Abstract:
The current energy transition imposes a rapid implementation of energy storage systems with high energy density and eminent regeneration and cycling efficiency. Metal hydrides are potential candidates for generalized energy storage, when coupled with fuel cell units and/or batteries. An overview of ongoing research is reported and discussed in this review work on the light of application as hydrog…
▽ More
The current energy transition imposes a rapid implementation of energy storage systems with high energy density and eminent regeneration and cycling efficiency. Metal hydrides are potential candidates for generalized energy storage, when coupled with fuel cell units and/or batteries. An overview of ongoing research is reported and discussed in this review work on the light of application as hydrogen and heat storage matrices, as well as thin films for hydrogen optical sensors. These include a selection of single-metal hydrides, Ti-V(Fe) based intermetallics, multi-principal element alloys (high-entropy alloys), and a series of novel synthetically accessible metal borohydrides. Metal hydride materials can be as well of important usefulness for MH-based electrodes with high capacity (e.g. MgH2 ~ 2000 mAh g-1) and solid-state electrolytes displaying high ionic conductivity suitable, respectively, for Li-ion and Li/Mg battery technologies. To boost further research and development directions some characterization techniques dedicated to the study of M-H interactions, their equilibrium reactions, and additional quantification of hydrogen concentration in thin film and bulk hydrides are presented at the end of this manuscript.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Interstitial Carbon in bcc HfNbTiVZr high entropy alloy from first principles
Authors:
Luis Casillas-Trujillo,
Ulf Jansson,
Martin Sahlberg,
Gustav Ek,
Magnus M. Nygård,
Magnus H. Sørby,
Bjørn C. Hauback,
Igor Abrikosov,
Björn Alling
Abstract:
The remarkable mechanical properties of high entropy alloys can be further improved by interstitial alloying. In this work we employ density functional theory calculations to study the solution energies of dilute carbon interstitial atoms in tetrahedral and octahedral sites in bcc HfNbTiVZr. Our results indicate that carbon interstitials in tetrahedral sites are unstable, and the preferred octahed…
▽ More
The remarkable mechanical properties of high entropy alloys can be further improved by interstitial alloying. In this work we employ density functional theory calculations to study the solution energies of dilute carbon interstitial atoms in tetrahedral and octahedral sites in bcc HfNbTiVZr. Our results indicate that carbon interstitials in tetrahedral sites are unstable, and the preferred octahedral sites present a large spread in the energy of solution. The inclusion of carbon interstitials induces large structural relaxations with long-range effects. The effect of local chemical environment on the energy of solution is investigated by performing a local cluster expansion including studies of its correlation with the carbon atomic Voronoi volume. However, the spread in solution energetics can not be explained with a local environment analysis only pointing towards a complex, long-range influence of interstitial carbon in this alloy.
△ Less
Submitted 3 October, 2020;
originally announced October 2020.
-
Pseudo-ternary LiBH4-LiCl-P2S5 system as structurally disordered bulk electrolyte for all-solid-state lithium batteries
Authors:
Abdelouahab El Kharbachi,
Julia Wind,
Amund Ruud,
Astrid B. Høgset,
Magnus M. Nygård,
Junxian Zhang,
Magnus H. Sørby,
Sangryun Kim,
Fermin Cuevas,
Shin-ichi Orimo,
fMaximilian Fichtner,
Michel Latroche,
Helmer Fjellvåg,
Bjørn C. Hauback
Abstract:
The properties of the mixed system LiBH4 LiCl P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 601C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is 10-3 Scm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. S…
▽ More
The properties of the mixed system LiBH4 LiCl P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 601C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is 10-3 Scm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. Structural analysis and characterization of the material suggest that BH4 groups and PS4 may belong to the same molecular structure, where Cl ions interplay to accommodate the structural unit. Thanks to its conductivity, ductility and electrochemical stability (up to 5 V, Au vs. Li+/Li), this new electrolyte is successfully tested in battery cells operated with a cathode material (layered TiS2, theo. capacity 239 mAh g-1) and Li anode resulting in 93% capacity retention (10 cycles) and notable cycling stability under the current density 12 mA g-1 (0.05C-rate) at 501C. Further advanced characterisation by means of operando synchrotron X-ray diffraction in transmission mode contributes explicitly to a better understanding of the (de)lithiation processes of solid-state battery electrodes operated at moderate temperatures.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Materials for hydrogen-based energy storage: Past, recent progress and future outlook
Authors:
Volodymyr A. Yartys,
Marcello Baricco,
Jose Bellosta von Colbe,
Didier Blanchard,
Robert C. Bowman Jr.,
Darren P. Broom,
Craig E. Buckley,
Fei Chang,
Ping Chen,
Young Whan Cho,
Jean-Claude Crivello,
Fermin Cuevas,
William I. F. David,
Petra E. de Jongh,
Roman V. Denys,
Martin Dornheim,
Michael Felderhoff,
Yaroslav Filinchuk,
George E. Froudakis,
David M. Grant,
Bjørn C. Hauback,
Ladislav Havela,
Teng He,
Michael Hirscher,
Terry D. Humphries
, et al. (23 additional authors not shown)
Abstract:
Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The Magnesium group of international experts contributing to IEA Task 32 Hydrogen Based Energy Storage recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article…
▽ More
Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The Magnesium group of international experts contributing to IEA Task 32 Hydrogen Based Energy Storage recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article not only overviews the latest activities on both fundamental aspects of Mg-based hydrides and their applications, but also presents a historic overview on the topic and outlines projected future developments. Particular attention is paid to the theoretical and experimental studies of Mg-H system at extreme pressures, kinetics and thermodynamics of the systems based on MgH2,nanostructuring, new Mg-based compounds and novel composites, and catalysis in the Mg based H storage systems. Finally, thermal energy storage and upscaled H storage systems accommodating MgH2 are presented.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Direct observation of the magnetic proximity effect in amorphous exchange-spring magnets by neutron reflectometry
Authors:
A. J. Qviller,
F. Magnus,
B. J. Kirby,
B. Hjörvarsson,
C. Frommen,
B. C. Hauback
Abstract:
In this letter we report a direct observation of a magnetic proximity effect in an amorphous thin film exchange-spring magnet by the use of neutron reflectometry. The exchange-spring magnet is a trilayer consisting of two ferromagnetic layers with high $T_c$'s separated by a ferromagnetic layer, which is engineered to have a significantly lower $T_c$ than the embedding layers. This enables us to m…
▽ More
In this letter we report a direct observation of a magnetic proximity effect in an amorphous thin film exchange-spring magnet by the use of neutron reflectometry. The exchange-spring magnet is a trilayer consisting of two ferromagnetic layers with high $T_c$'s separated by a ferromagnetic layer, which is engineered to have a significantly lower $T_c$ than the embedding layers. This enables us to measure magnetization depth profiles at which the low $T_c$ material is in a ferromagnetic or paramagnetic state, while the embedding layers are ferromagnetic. A clear proximity effect is observed 7 K above the $T_c$ of the embedded layer, with a range extending 50 $\unicode{xC5}$.
△ Less
Submitted 26 May, 2020; v1 submitted 4 April, 2018;
originally announced April 2018.
-
Hydrogen Concentration in Photovoltaic a-Si:H Annealed at Different Temperatures Measured by Neutron Reflectometry
Authors:
A. J. Qviller,
E. S. Marstein,
C. C. You,
H. Haug,
J. R. P. Webster,
B. Hjörvarsson,
C. Frommen,
B. C. Hauback
Abstract:
Amorphous hydrogenated silicon (a-Si:H) is an important material for surface defect passivation of photovoltaic silicon (Si) wafers in order to reduce their recombination losses. The material is however unstable with regards to hydrogen (H) desorption at elevated temperatures, which can be an issue during processing and device manufacturing. In this work we determine the temperature stability of a…
▽ More
Amorphous hydrogenated silicon (a-Si:H) is an important material for surface defect passivation of photovoltaic silicon (Si) wafers in order to reduce their recombination losses. The material is however unstable with regards to hydrogen (H) desorption at elevated temperatures, which can be an issue during processing and device manufacturing. In this work we determine the temperature stability of a-Si:H by structural characterization of a-Si:H/Si bilayers with neutron- (NR) and X-ray reflectometry (XRR) combined with photoconductance measurements yielding the minority carrer lifetime. The neutrons are sensitive to light elements such as H, while the X-rays which are insensitive to the H-concentration, provide an independent constraint on the layer structure. It is shown that H-desorption takes place at a temperature of approximately T = $425\,^{\circ}\mathrm{C}$ and that hydrogen content and minority carrier lifetimes have a strongly correlated linear relationship, which can be interpreted as one hydrogen atom passivating one defect.
△ Less
Submitted 22 May, 2018; v1 submitted 13 March, 2018;
originally announced March 2018.
-
The role of grain boundary scattering in reducing the thermal conductivity of polycrystalline XNiSn (X = Hf, Zr, Ti) half-Heusler alloys
Authors:
Matthias Schrade,
Kristian Berland,
Simen N. H. Eliassen,
Matylda N. Guzik,
Cristina Echevarria-Bonet,
Magnus H. Sørby,
Petra Jenus,
Bjørn C. Hauback,
Raluca Tofan,
Anette E. Gunnæs,
Clas Persson,
Ole Martin Løvvik,
Terje G. Finstad
Abstract:
Thermoelectric application of half-Heusler compounds suffers from their fairly high thermal conductivities. Insight into how effective various scattering mechanisms are in reducing the thermal conductivity of fabricated XNiSn compounds (X = Hf, Zr, Ti, and mixtures thereof) is therefore crucial. Here, we show that such insight can be obtained through a concerted theory-experiment comparison of how…
▽ More
Thermoelectric application of half-Heusler compounds suffers from their fairly high thermal conductivities. Insight into how effective various scattering mechanisms are in reducing the thermal conductivity of fabricated XNiSn compounds (X = Hf, Zr, Ti, and mixtures thereof) is therefore crucial. Here, we show that such insight can be obtained through a concerted theory-experiment comparison of how the lattice thermal conductivity kLat(T) depends on temperature and crystallite size. Comparing theory and experiment for a range of Hf0.5Zr0.5NiSn and ZrNiSn samples reported in the literature and in the present paper revealed that grain boundary scattering plays the most important role in bringing down kLat, in particular so for unmixed compounds. Our concerted analysis approach was corroborated by a good qualitative agreement between the measured and calculated kLat of polycrystalline samples, where the experimental average crystallite size was used as an input parameter for the calculations. The calculations were based on the Boltzmann transport equation and ab initio density functional theory. Our analysis explains the significant variation of reported kLat of nominally identical XNiSn samples and is expected to provide valuable insights into the dominant scattering mechanisms even for other materials.
△ Less
Submitted 11 October, 2017; v1 submitted 13 July, 2017;
originally announced July 2017.
-
Synthesis of photochromic oxygen-containing yttrium hydride
Authors:
J. Montero,
F. A. Martinsen,
M. Lelis,
S. Zh. Karazhanov,
B. C. Hauback,
E. S. Marstein
Abstract:
Photochromic oxygen-containing yttrium hydride has been synthesized using a two step process. The process consists of an initial sputter deposition of oxygen-free yttrium hydride YH$_\mathrm{x}$, followed by a controlled reaction with air that causes incorporation of oxygen into the material. An in-situ study of the YH$_\mathrm{x}$ as it reacted with oxygen was made possible by applying an alumini…
▽ More
Photochromic oxygen-containing yttrium hydride has been synthesized using a two step process. The process consists of an initial sputter deposition of oxygen-free yttrium hydride YH$_\mathrm{x}$, followed by a controlled reaction with air that causes incorporation of oxygen into the material. An in-situ study of the YH$_\mathrm{x}$ as it reacted with oxygen was made possible by applying an aluminium capping layer with a low but non-zero oxygen permeability prior to air exposure. During the reaction, the visual appearance of the YH$_\mathrm{x}$ went from dark and opaque to transparent and yellowish. This transition was accredited incorporation of oxygen into the material, as shown through analysis with energy dispersive x-ray spectroscopy (EDS) and x-ray photoemission spectroscopy (XPS). Grazing incidence x-ray diffraction (GIXRD) studies revealed an fcc structure both before and after oxygen exposure, with a lattice parameter that increased from 5.2 Å to 5.4 Å during the reaction. With the lattice parameter in the oxygen free YH$_\mathrm{x}$ being equal to that reported earlier for YH$_\mathrm{2}$, our findings suggest that the non-reacted YH$_\mathrm{x}$ in this study is in-fact YH$_\mathrm{2}$.
△ Less
Submitted 26 October, 2016;
originally announced October 2016.
-
New insights into the photochromic mechanism in oxygen-containing yttrium hydride thin films: an optical perspective
Authors:
J. Montero,
F. A. Martinsen,
S. Zh. Karazhanov,
B. C. Hauback,
E. S. Marstein
Abstract:
Oxygen-containing yttrium hydride thin films exhibit a photochromic behavior: transparent thin films switch from a transparent state to a photodarkened state after being illuminated with UV or blue light. This feature has attracted much attention in recent years due to its potential applications in smart fenestration or in any device in which a response to intense light radiation is needed. Howeve…
▽ More
Oxygen-containing yttrium hydride thin films exhibit a photochromic behavior: transparent thin films switch from a transparent state to a photodarkened state after being illuminated with UV or blue light. This feature has attracted much attention in recent years due to its potential applications in smart fenestration or in any device in which a response to intense light radiation is needed. However, the process responsible for the reversible change of the optical properties upon illumination is still not well understood. The objective of the present work is to shed some light on the photochromic mechanism by using an optical approach. On this basis, the optical properties of oxygen-containing yttrium hydride thin films have been studied by optical spectrophotometry and ellipsometry before (transparent state) and after UV illumination (dark state). According to the observed results, the photochromic optical change of the films can be explained quantitatively by the gradual growth, under illumination, of metallic phases within the initial wide-band gap semiconducting lattice.
△ Less
Submitted 5 September, 2016;
originally announced September 2016.
-
Surface oxide on thin films of yttrium hydride studied by neutron reflectometry
Authors:
Trygve Mongstad,
Charlotte Platzer-Björkman,
Jan Petter Mæhlen,
Bjørn C. Hauback,
Smagul Zh. Karazhanov,
Fabrice Cousin
Abstract:
The applicability of standard methods for compositional analysis is limited for H-containing films. Neutron reflectometry is a powerful, non-destructive method that is especially suitable for these systems due to the large negative scattering length of H. In this work we demonstrate how neutron reflectometry can be used to investigate thin films of yttrium hydride. Neutron reflectometry gives a st…
▽ More
The applicability of standard methods for compositional analysis is limited for H-containing films. Neutron reflectometry is a powerful, non-destructive method that is especially suitable for these systems due to the large negative scattering length of H. In this work we demonstrate how neutron reflectometry can be used to investigate thin films of yttrium hydride. Neutron reflectometry gives a strong contrast between the film and the surface oxide layer, enabling us to estimate the oxide thickness and oxygen penetration depths. A surface oxide layer of 5-10 nm thickness was found for unprotected yttrium hydride films.
△ Less
Submitted 18 May, 2012;
originally announced May 2012.
-
MgyNi1-y(Hx) thin films deposited by magnetron co-sputtering
Authors:
Trygve Mongstad,
Chang C. You,
Annett Thøgersen,
Jan Petter Mæhlen,
Charlotte Platzer-Björkman,
Bjørn C. Hauback,
Smagul Zh. Karazhanov
Abstract:
In this work we have synthesised thin films of MgyNi1-y(Hx) metal and metal hydride with y between 0 and 1. The films are deposited by magnetron co-sputtering of metallic targets of Mg and Ni. Metallic MgyNi1-y films were deposited with pure Ar plasma while MgyNi1-yHx hydride films were deposited reactively with 30% H2 in the Ar plasma. The depositions were done with a fixed substrate carrier, pro…
▽ More
In this work we have synthesised thin films of MgyNi1-y(Hx) metal and metal hydride with y between 0 and 1. The films are deposited by magnetron co-sputtering of metallic targets of Mg and Ni. Metallic MgyNi1-y films were deposited with pure Ar plasma while MgyNi1-yHx hydride films were deposited reactively with 30% H2 in the Ar plasma. The depositions were done with a fixed substrate carrier, producing films with a spatial gradient in the Mg and Ni composition. The combinatorial method of co-sputtering gives an insight into the phase diagram of MgyNi1-y and MgyNi1-yHx, and allows us to investigate structural, optical and electrical properties of the resulting alloys. Our results show that reactive sputtering gives direct deposition of metal hydride films, with high purity in the case of Mg~2NiH~4. We have observed limited oxidation after several months of exposure to ambient conditions. MgyNi1-y and MgyNi1-yHx films might be applied for optical control in smart windows, optical sensors and as a semiconducting material for photovoltaic solar cells.
△ Less
Submitted 29 February, 2012;
originally announced February 2012.
-
A new thin film photochromic material: Oxygen-containing yttrium hydride
Authors:
Trygve Mongstad,
Charlotte Platzer-Björkman,
Jan Petter Maehlen,
Lennard P. A. Mooij,
Yevheniy Pivak,
Bernard Dam,
Erik S. Marstein,
Bjørn C. Hauback,
Smagul Karazhanov
Abstract:
In this work we report on photochromism in transparent thin film samples of oxygen-containing yttrium hydride. Exposure to visible and ultraviolet (UV) light at moderate intensity triggers a decrease in the optical transmission of visible and infrared (IR) light. The photo-darkening is colour-neutral. We show that the optical transmission of samples of 500 nm thickness can be reduced by up to 50%…
▽ More
In this work we report on photochromism in transparent thin film samples of oxygen-containing yttrium hydride. Exposure to visible and ultraviolet (UV) light at moderate intensity triggers a decrease in the optical transmission of visible and infrared (IR) light. The photo-darkening is colour-neutral. We show that the optical transmission of samples of 500 nm thickness can be reduced by up to 50% after one hour of illumination with light of moderate intensity. The reaction is reversible and samples that are left in the dark return to the initial transparent state. The relaxation time in the dark depends on the temperature of the sample and the duration of the light exposure. The photochromic reaction takes place under ambient conditions in the as-deposited state of the thin-film samples.
△ Less
Submitted 13 September, 2011;
originally announced September 2011.
-
Transparent yttrium hydride thin films prepared by reactive sputtering
Authors:
T. Mongstad,
C. Platzer-Björkman,
S. Zh. Karazhanov,
A. Holt,
J. P. Maehlen,
B. C. Hauback
Abstract:
Metal hydrides have earlier been suggested for utilization in solar cells. With this as a motivation we have prepared thin films of yttrium hydride by reactive magnetron sputter deposition. The resulting films are metallic for low partial pressure of hydrogen during the deposition, and black or yellow-transparent for higher partial pressure of hydrogen. Both metallic and semiconducting transparent…
▽ More
Metal hydrides have earlier been suggested for utilization in solar cells. With this as a motivation we have prepared thin films of yttrium hydride by reactive magnetron sputter deposition. The resulting films are metallic for low partial pressure of hydrogen during the deposition, and black or yellow-transparent for higher partial pressure of hydrogen. Both metallic and semiconducting transparent YHx films have been prepared directly in-situ without the need of capping layers and post-deposition hydrogenation. Optically the films are similar to what is found for YHx films prepared by other techniques, but the crystal structure of the transparent films differ from the well-known YH3 phase, as they have an fcc lattice instead of hcp.
△ Less
Submitted 3 February, 2011; v1 submitted 2 February, 2011;
originally announced February 2011.
-
Antiferromagnetic vs ferromagnetic interactions and spin-glass-like behavior in ruthenates
Authors:
P. Ravindran,
R. Vidya,
P. Vajeeston,
A. Kjekshus,
H. Fjellvaag,
B. C. Hauback
Abstract:
We have made a series of gradient-corrected relativistic full-potential density-functional calculation for Ca-substituted and hole-doped SrRuO$_3$ in para, ferro, and $A$-, $C$-, and $G$-type antiferromagnetic states. Magnetic phase-diagram data for Sr$_{1-x}$Ca$_x$RuO$_3$ at 0 K are presented. Neutron diffraction measurement combined with total energy calculations show that spin-glass behavior…
▽ More
We have made a series of gradient-corrected relativistic full-potential density-functional calculation for Ca-substituted and hole-doped SrRuO$_3$ in para, ferro, and $A$-, $C$-, and $G$-type antiferromagnetic states. Magnetic phase-diagram data for Sr$_{1-x}$Ca$_x$RuO$_3$ at 0 K are presented. Neutron diffraction measurement combined with total energy calculations show that spin-glass behavior with short-range antiferromagnetic interactions rules in CaRuO$_3$. The substitution of Sr by Ca in SrRuO$_3$ decreases the ferromagnetic interaction and enhances the $G$-type antiferromagnetic interaction; the $G$-AF state is found to stabilize around $x$ = 0.75 consistent with experimental observations. Inclusion of spin-orbit coupling is found to be important in order to arrive at the correct magnetic ground state in ruthenates.
△ Less
Submitted 16 September, 2002;
originally announced September 2002.
