-
ViPErLEED package I: Calculation of $I(V)$ curves and structural optimization
Authors:
Florian Kraushofer,
Alexander M. Imre,
Giada Franceschi,
Tilman Kißlinger,
Erik Rheinfrank,
Michael Schmid,
Ulrike Diebold,
Lutz Hammer,
Michele Riva
Abstract:
Low-energy electron diffraction (LEED) is a widely used technique in surface-science. Yet, it is rarely used to its full potential. The quantitative information about the surface structure, contained in the modulation of the intensities of the diffracted beams as a function of incident electron energy, LEED I(V), is underutilized. To acquire these data, minor adjustments would be required in most…
▽ More
Low-energy electron diffraction (LEED) is a widely used technique in surface-science. Yet, it is rarely used to its full potential. The quantitative information about the surface structure, contained in the modulation of the intensities of the diffracted beams as a function of incident electron energy, LEED I(V), is underutilized. To acquire these data, minor adjustments would be required in most experimental setups, but existing analysis software is cumbersome to use. ViPErLEED (Vienna package for Erlangen LEED) lowers these barriers, introducing a combined solution for data acquisition, extraction, and computational analysis. These parts are discussed in three separate publications. Here, the focus is on the computational part of ViPErLEED, which performs automated LEED-I(V) calculations and structural optimization. Minimal user input is required, and the functionality is significantly enhanced compared to existing solutions. Computation is performed by embedding the Erlangen tensor-LEED package (TensErLEED). ViPErLEED manages parallelization, monitors convergence, and processes input and output. This makes LEED I(V) more accessible to new users while minimizing the potential for errors and the manual labor. Added functionality includes structure-dependent defaults, automatic detection of bulk and surface symmetries and their relationship, automated symmetry-preserving search procedures, adjustments to the TensErLEED code to handle larger systems, as well as parallelization and optimization. Modern file formats are used as input and output, and there is a direct interface to the Atomic Simulation Environment (ASE) package. The software is implemented primarily in Python (version >=3.7) and provided as an open-source package (GNU GPLv3 or later). A structure determination of the $α$-Fe2O3(1-102)-(1x1) surface is presented as an example for the application of the software.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
ViPErLEED package II: Spot tracking, extraction and processing of I(V) curves
Authors:
Michael Schmid,
Florian Kraushofer,
Alexander M. Imre,
Tilman Kißlinger,
Lutz Hammer,
Ulrike Diebold,
Michele Riva
Abstract:
As part of the ViPErLEED project (Vienna package for Erlangen LEED, low-energy electron diffraction), computer programs have been developed for facile and user-friendly data extraction from movies of LEED images. The programs make use of some concepts from astronomical image processing and analysis. As a first step, flat-field and dark-frame corrections reduce the effects of inhomogeneities of the…
▽ More
As part of the ViPErLEED project (Vienna package for Erlangen LEED, low-energy electron diffraction), computer programs have been developed for facile and user-friendly data extraction from movies of LEED images. The programs make use of some concepts from astronomical image processing and analysis. As a first step, flat-field and dark-frame corrections reduce the effects of inhomogeneities of the camera and screen. In a second step, for identifying all diffraction maxima ("spots"), it is sufficient to manually mark and label a single spot or very few spots. Then the program can automatically identify all other spots and determine the distortions of the image. This forms the basis for automatic spot tracking (following the "beams" as they move across the LEED screen) and intensity measurement. Even for complex structures with hundreds to a few thousand diffraction beams, this step takes less than a minute. The package also includes a program for further processing of these I(V) curves (averaging of equivalent beams, manual and/or automatic selection, smoothing) as well as several utilities. The software is implemented as a set of plugins for the public-domain image processing program ImageJ and provided as an open-source package.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Strongly Anisotropic Spin and Orbital Rashba Effect at a Tellurium - Noble Metal Interface
Authors:
B. Geldiyev,
M. Ünzelmann,
P. Eck,
T. Kißlinger,
J. Schusser,
T. Figgemeier,
P. Kagerer,
N. Tezak,
M. Krivenkov,
A. Varykhalov,
A. Fedorov,
L. Nicolaï,
J. Minár,
K. Miyamoto,
T. Okuda,
K. Shimada,
D. Di Sante,
G. Sangiovanni,
L. Hammer,
M. A. Schneider,
H. Bentmann,
F. Reinert
Abstract:
We study the interplay of lattice, spin and orbital degrees of freedom in a two-dimensional model system: a flat square lattice of Te atoms on a Au(100) surface. The atomic structure of the Te monolayer is determined by scanning tunneling microscopy (STM) and quantitative low-energy electron diffraction (LEED-IV). Using spin- and angle-resolved photoelectron spectroscopy (ARPES) and density functi…
▽ More
We study the interplay of lattice, spin and orbital degrees of freedom in a two-dimensional model system: a flat square lattice of Te atoms on a Au(100) surface. The atomic structure of the Te monolayer is determined by scanning tunneling microscopy (STM) and quantitative low-energy electron diffraction (LEED-IV). Using spin- and angle-resolved photoelectron spectroscopy (ARPES) and density functional theory (DFT), we observe a Te-Au interface state with highly anisotropic Rashba-type spin-orbit splitting at the X point of the Brillouin zone. Based on a profound symmetry and tight-binding analysis, we show how in-plane square lattice symmetry and broken inversion symmetry at the Te-Au interface together enforce a remarkably anisotropic orbital Rashba effect which strongly modulates the spin splitting.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Reversible Tuning of Collinear versus Chiral Magnetic Order by Chemical Stimulus
Authors:
Jing Qi,
Paula M. Weber,
Tilman Kißlinger,
Lutz Hammer,
M. Alexander Schneider,
Matthias Bode
Abstract:
The Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction mediates collinear magnetic interactions via the conduction electrons of a non-magnetic spacer, resulting in a ferro- or antiferromagnetic magnetization in magnetic multilayers. The resulting spin-polarized charge transport effects have found numerous applications. Recently it has been discovered that heavy non-magnetic spacers are able to media…
▽ More
The Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction mediates collinear magnetic interactions via the conduction electrons of a non-magnetic spacer, resulting in a ferro- or antiferromagnetic magnetization in magnetic multilayers. The resulting spin-polarized charge transport effects have found numerous applications. Recently it has been discovered that heavy non-magnetic spacers are able to mediate an indirect magnetic coupling that is non-collinear and chiral. This Dzyaloshinskii-Moriya-enhanced RKKY (DME-RKKY) interaction causes the emergence of a variety of interesting magnetic structures, such as skyrmions and spin spirals. Applications using these magnetic quasi-particles require a thorough understanding and fine-tuning of the balance between the Dzyaloshinskii-Moriya interaction and other magnetic interactions, e.g., the exchange interaction and magnetic anisotropy contributions. Here, we show by spin-polarized scanning tunneling microscopy that the spin structure of manganese oxide chains on Ir(001) can reproducibly be switched from chiral to collinear antiferromagnetic interchain interactions by increasing the oxidation state of MnO$_2$ while the reverse process can be induced by thermal reduction. The underlying structural change is revealed by low-energy electron diffraction intensity data (LEED-IV) analysis. Density functional theory calculations suggest that the magnetic transition may be caused by a significant increase of the Heisenberg exchange upon oxidation.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
New submonolayer copper telluride phase on Cu(111) -- ad-chain and trough formation
Authors:
Lutz Hammer,
Tilman Kißlinger,
M. Alexander Schneider
Abstract:
We present a so far undetected submonolayer phase of copper telluride on Cu(111) with $\left(5 \times \sqrt{3}\right)_{\text{rect}}$ periodicity and coverage of 0.40 ML Tellurium (Te), which can be grown with perfect long-range order. It is structurally characterized by a combination of quantitative low-energy electron diffraction (LEED-IV), scanning tunneling microscopy (STM), and density functio…
▽ More
We present a so far undetected submonolayer phase of copper telluride on Cu(111) with $\left(5 \times \sqrt{3}\right)_{\text{rect}}$ periodicity and coverage of 0.40 ML Tellurium (Te), which can be grown with perfect long-range order. It is structurally characterized by a combination of quantitative low-energy electron diffraction (LEED-IV), scanning tunneling microscopy (STM), and density functional theory (DFT). We find that Te induces the formation of four atom wide linear troughs within the Cu(111) surface filled up by two Te atoms per unit cell. Additionally, the interspace between the troughs is decorated by Cu$_2$Te$_2$ ad-chains sitting at hcp sites. All Te atoms exhibit the same local sixfold coordination: They occupy threefold hollow sites of the substrate and are one-sided attached to another three Cu atoms. The presented structural model is verified by a LEED-IV analysis with Pendry R-factor of R = 0.174 and quantitative agreement of structural parameters with DFT predictions. It also has by far the lowest energy of all models tested by DFT and simulated STM images agree perfectly with experiment. It turns out that the new $\left(5 \times \sqrt{3}\right)_{\text{rect}}$ phase is the most dense surface telluride phase possible on Cu(111) before bulk-like copper telluride starts to growth.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
CuTe chains on Cu(111) by deposition of 1/3 ML Te: atomic and electronic structure
Authors:
Tilman Kißlinger,
Andreas Raabgrund,
Begmuhammet Geldiyev,
Maximilian Ammon,
Janek Rieger,
Jonas Hauner,
Lutz Hammer,
Thomas Fauster,
M. Alexander Schneider
Abstract:
The surface atomic and electronic structure after deposition of 1/3 monolayer (ML) Te on Cu(111) was determined using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy and spectroscopy (STM/STS), angle-resolved single and two-photon photoelectron spectroscopy (ARPES /AR-2PPE) and density functional theory (DFT) calculations. Contrary to the current state in lit…
▽ More
The surface atomic and electronic structure after deposition of 1/3 monolayer (ML) Te on Cu(111) was determined using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy and spectroscopy (STM/STS), angle-resolved single and two-photon photoelectron spectroscopy (ARPES /AR-2PPE) and density functional theory (DFT) calculations. Contrary to the current state in literature Te does not create a two-dimensional surface alloy but forms Cu$_2$Te$_2$ adsorbate chains in a $\left(2\sqrt{3} \times \sqrt{3}\right)\textrm{R30}^\circ$ superstructure. We establish this by a high-precision LEED-IV structural analysis with Pendry $R$ factor of $R = 0.099$ and corroborating DFT and STM results. The electronic structure of the surface phase is dominated by an anisotropic downward dispersing state at the Fermi energy $E_F$ and a more isotropic upward dispersing unoccupied state at $E-E_F = + 1.43\,\textrm{eV}$. Both states coexist with bulk states of the projected band structure and are therefore surface resonances.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Surface structure and stacking of the commensurate $\left(\sqrt{13}\times\sqrt{13}\right)$R13.9° charge density wave phase of 1T-TaS$_2$(0001)
Authors:
Gevin von Witte,
Tilman Kißlinger,
Jan Gerrit Horstmann,
Kai Rossnagel,
M. Alexander Schneider,
Claus Ropers,
Lutz Hammer
Abstract:
By quantitative low-energy electron diffraction (LEED) we investigate the extensively studied commensurate charge density wave (CDW) phase of trigonal tantalum disulphide (1T-TaS$_2$), which develops at low temperatures with a $\left(\sqrt{13}\times\sqrt{13}\right)$R13.9° periodicity. A full-dynamical analysis of the energy dependence of diffraction spot intensities reveals the entire crystallogra…
▽ More
By quantitative low-energy electron diffraction (LEED) we investigate the extensively studied commensurate charge density wave (CDW) phase of trigonal tantalum disulphide (1T-TaS$_2$), which develops at low temperatures with a $\left(\sqrt{13}\times\sqrt{13}\right)$R13.9° periodicity. A full-dynamical analysis of the energy dependence of diffraction spot intensities reveals the entire crystallographic surface structure, i.e. the detailed atomic positions within the outermost two trilayers consisting of 78 atoms as well as the CDW stacking. The analysis is based on an unusually large data set consisting of spectra for 128 inequivalent beams taken in the energy range 20-250 eV and an excellent fit quality expressed by a bestfit Pendry R-factor of R=0.110. The LEED intensity analysis reveals that the well-accepted model of star-of-David-shaped clusters of Ta atoms for the bulk structure also holds for the outermost two TaS$_2$ trilayers. Specifically, in both layers the clusters of Ta atoms contract laterally by up to 0.25 $Å$ and also slightly rotate within the superstructure cell, causing respective distortions as well as heavy bucklings (up to 0.23 $Å$) in the adjacent sulphur layers. Most importantly, our analysis finds that the CDWs of the 1$^{\text{st}}$ and 2$^{\text{nd}}$ trilayer are vertically aligned, while there is a lateral shift of two units of the basic hexagonal lattice (6.71 $Å$) between the 2$^{\text{nd}}$ and 3$^{\text{rd}}$ trilayer. The results may contribute to a better understanding of the intricate electronic structure of the reference compound 1T-TaS$_2$ and guide the way to the analysis of complex structures in similar quantum materials.
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
-
Orbital-driven Rashba effect in a binary honeycomb monolayer AgTe
Authors:
Maximilian Ünzelmann,
Hendrik Bentmann,
Philipp Eck,
Tilman Kißlinger,
Begmuhammet Geldiyev,
Janek Rieger,
Simon Moser,
Raphael C. Vidal,
Katharina Kißner,
Lutz Hammer,
M. Alexander Schneider,
Thomas Fauster,
Giorgio Sangiovanni,
Domenico Di Sante,
Friedrich Reinert
Abstract:
The Rashba effect is fundamental to the physics of two-dimensional electron systems and underlies a variety of spintronic phenomena. It has been proposed that the formation of Rashba-type spin splittings originates microscopically from the existence of orbital angular momentum (OAM) in the Bloch wave functions. Here, we present detailed experimental evidence for this OAM-based origin of the Rashba…
▽ More
The Rashba effect is fundamental to the physics of two-dimensional electron systems and underlies a variety of spintronic phenomena. It has been proposed that the formation of Rashba-type spin splittings originates microscopically from the existence of orbital angular momentum (OAM) in the Bloch wave functions. Here, we present detailed experimental evidence for this OAM-based origin of the Rashba effect by angle-resolved photoemission (ARPES) and two-photon photoemission (2PPE) experiments for a monolayer AgTe on Ag(111). Using quantitative low-energy electron diffraction (LEED) analysis we determine the structural parameters and the stacking of the honeycomb overlayer with picometer precision. Based on an orbital-symmetry analysis in ARPES and supported by first-principles calculations, we unequivocally relate the presence and absence of Rashba-type spin splittings in different bands of AgTe to the existence of OAM.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
Adsorption and Intermolecular Interaction of Cobalt Phthalocyanine on CoO(111) Ultrathin Films: An STM and DFT Study
Authors:
Tobias Schmitt,
Pascal Ferstl,
Lutz Hammer,
M. Alexander Schneider,
Josef Redinger
Abstract:
We investigate the adsorption of cobalt phthalocyanine (CoPc) molecules on a thin layer of cobalt oxide grown on Ir(100). To that end we compare the results of low-temperature scanning tunneling microscopy (STM) with those of ab-initio density functional theory (DFT) calculations and reveal the adsorption geometry. We find that the CoPc molecules lie flat on the surface and that their central coba…
▽ More
We investigate the adsorption of cobalt phthalocyanine (CoPc) molecules on a thin layer of cobalt oxide grown on Ir(100). To that end we compare the results of low-temperature scanning tunneling microscopy (STM) with those of ab-initio density functional theory (DFT) calculations and reveal the adsorption geometry. We find that the CoPc molecules lie flat on the surface and that their central cobalt atom forms a chemical bond to a substrate oxygen ion. However, this bond contributes only modestly to the adsorption energy, while van-der-Waals forces dominate the potential landscape and determine to a large extend the geometry as well as the distortion of substrate and molecule. Furthermore they lead to attractive molecule-molecule interactions at higher molecular coverages. The DFT calculations predict energetic positions of the molecular orbitals which are compared to scanning tunneling spectroscopy (STS) measurements.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Monatomic Co, CoO$_2$, and CoO$_3$ Nanowires on Ir(100) and Pt(100) surfaces: Formation, Structure, and Energetics
Authors:
P. Ferstl,
F. Mittendorfer,
J. Redinger,
M. A. Schneider,
L. Hammer
Abstract:
In this study we investigate the structural and chemical changes of monatomic CoO$_2$ chains grown self-organized on the Ir(100) surface [P. Ferstl et al., PRL 117, 2016, 046101] and on Pt(100) under reducing and oxidizing conditions. By a combination of quantitative low-energy electron diffraction, scanning tunnelling microscopy, and density functional theory we show that the cobalt oxide wires a…
▽ More
In this study we investigate the structural and chemical changes of monatomic CoO$_2$ chains grown self-organized on the Ir(100) surface [P. Ferstl et al., PRL 117, 2016, 046101] and on Pt(100) under reducing and oxidizing conditions. By a combination of quantitative low-energy electron diffraction, scanning tunnelling microscopy, and density functional theory we show that the cobalt oxide wires are completely reduced by H$_2$ at temperatures above 320 K and a 3x1 ordered Ir$_2$Co or Pt$_2$Co surface alloy is formed. Depending on temperature the surface alloy on Ir(100) is either hydrogen covered (T < 400 K) or clean and eventually undergoes an irreversible order-disorder transition at about 570 K. The Pt$_2$Co surface alloy disorders with the desorption of hydrogen, whereby Co submerges into subsurface sites. Vice versa, applying stronger oxidants than O$_2$ such as NO$_2$ leads to the formation of CoO3 chains on Ir(100) in a 3x1 superstructure. On Pt(100) such a CoO$_3$ phase could not be prepared so far, which however, is due to the UHV conditions of our experiments. As revealed by theory this phase will become stable in a regime of higher pressure. In general, the structures can be reversibly switched on both surfaces using the respective agents O$_2$, NO$_2$ and H$_2$.
△ Less
Submitted 19 October, 2018;
originally announced October 2018.
-
Subsurface Cation Vacancy Stabilization of the Magnetite (001) Surface
Authors:
R. Bliem,
E. McDermott,
P. Ferstl,
M. Setvin,
O. Gamba,
J. Pavelec,
M. A. Schneider,
M. Schmid,
U. Diebold,
P. Blaha,
L. Hammer,
G. S. Parkinson
Abstract:
Iron oxides play an increasingly prominent role in heterogeneous catalysis, hydrogen production, spintronics and drug delivery. The surface or material interface can be performance limiting in these applications, so it is vital to determine accurate atomic-scale structures for iron oxides and understand why they form. Using a combination of quantitative low-energy electron diffraction, scanning tu…
▽ More
Iron oxides play an increasingly prominent role in heterogeneous catalysis, hydrogen production, spintronics and drug delivery. The surface or material interface can be performance limiting in these applications, so it is vital to determine accurate atomic-scale structures for iron oxides and understand why they form. Using a combination of quantitative low-energy electron diffraction, scanning tunneling microscopy, and density functional theory calculations, we show that an ordered array of subsurface iron vacancies and interstitials underlies the well-known (rt2xrt2)R45° reconstruction of Fe3O4(001). This hitherto unobserved stabilization mechanism occurs because the iron oxides prefer to redistribute cations in the lattice in response to oxidizing or reducing environments. Many other metal oxides also achieve stoichiometric variation in this way, so such surface structures are likely commonplace.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
