-
A high-speed, high-resolution Transition Edge Sensor spectrometer for soft X-rays at the Advanced Photon Source
Authors:
Orlando Quaranta,
Don Jensen,
Kelsey Morgan,
Joel C. Weber,
Jessica L. McChesney,
Hao Zheng,
Tejas Guruswamy,
Jonathan Baldwin,
Ben Mates,
Nathan Ortiz,
Johnathon Gard,
Doug Bennet,
Dan Schmidt,
Lisa Gades,
Antonino Miceli
Abstract:
This project explores the design and development of a transition edge sensor (TES) spectrometer for resonant soft X- ray scattering (RSXS) measurements developed in collaboration between Argonne National Laboratory (ANL) and the National Institute of Standards and Technology (NIST). Soft X-ray scattering is a powerful technique for studying the electronic and magnetic properties of materials on a…
▽ More
This project explores the design and development of a transition edge sensor (TES) spectrometer for resonant soft X- ray scattering (RSXS) measurements developed in collaboration between Argonne National Laboratory (ANL) and the National Institute of Standards and Technology (NIST). Soft X-ray scattering is a powerful technique for studying the electronic and magnetic properties of materials on a microscopic level. However, the lack of high-performance soft X-ray spectrometers has limited the potential of this technique. TES spectrometers have the potential to overcome these limitations due to their high energy resolution, high efficiency, and broad energy range. This project aims to optimize the design of a TES spectrometer for RSXS measurements and more generally soft X-ray spectroscopy at the Advanced Photon Source (APS) 29-ID, leading to improved understanding of advanced materials. We will present a detailed description of the instrument design and implementation. The spectrometer consists of a large array of approximately 250 high-speed and high-resolution pixels. The pixels have saturation energies of approximately 1 keV, sub-ms pulse duration and energy resolution of approximately 1 eV. The array is read out using microwave multiplexing chips with MHz bandwidth per channel, enabling efficient data throughput. To facilitate measurement of samples in situ under ultra-high vacuum conditions at the beamline, the spectrometer is integrated with an approximately 1 m long snout.
△ Less
Submitted 3 January, 2025;
originally announced January 2025.
-
High-resolution Compton spectroscopy using X-ray microcalorimeters
Authors:
U. Patel,
T. Guruswamy,
A. J. Krzysko,
H. Charalambous,
L. Gades,
K. Wiaderek,
O. Quaranta,
Y. Ren,
A. Yakovenko,
A. Miceli
Abstract:
X-ray Compton spectroscopy is one of the few direct probes of the electron momentum distribution of bulk materials in ambient and operando environments. We report high-resolution inelastic X-ray scattering experiments with high momentum and energy transfer performed at a storage-ring-based high-energy X-ray light source facility using an X-ray microcalorimeter detector. Compton profiles were measu…
▽ More
X-ray Compton spectroscopy is one of the few direct probes of the electron momentum distribution of bulk materials in ambient and operando environments. We report high-resolution inelastic X-ray scattering experiments with high momentum and energy transfer performed at a storage-ring-based high-energy X-ray light source facility using an X-ray microcalorimeter detector. Compton profiles were measured for lithium and cobalt oxide powders relevant to lithium-ion battery research. Spectroscopic analysis of the measured Compton profiles shows high-sensitivity to the low-Z elements and oxidation states. The lineshape analysis of the measured Compton profiles in comparison with computed Hartree-Fock profiles is limited by the resolution of the energy-resolving semiconductor detector. We have characterized an X-ray transition-edge sensor microcalorimeter detector for high-resolution Compton scattering experiments using a bending magnet source at the Advanced Photon Source (APS) with a double crystal monochromator providing monochromatic photon energies near 27.5 keV. The momentum resolution below 0.16 atomic units was measured yielding an improvement of more than a factor of 7 over a state-of-the-art silicon drift detector for the same scattering geometry. Furthermore, the lineshapes of narrow valence and broad core electron profiles of sealed lithium metal were clearly resolved using an X-ray microcalorimeter detector compared to smeared and broadened lineshapes observed when using a silicon drift detector. High-resolution Compton scattering using the energy-resolving detector shown here presents new opportunities for spatial imaging of electron momentum distributions for a wide class of materials with applications ranging from electrochemistry to condensed matter physics.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Devices for Thermal Conductivity Measurements of Electroplated Bi for X-ray TES Absorbers
Authors:
Orlando Quaranta,
Lisa M. Gades,
Cindy Xue,
Ralu Divan,
Umeshkumar M. Patel,
Tejas Guruswamy,
Antonino Miceli
Abstract:
Electroplated Bismuth (Bi) is commonly used in Transition-Edge Sensors (TESs) for X-rays because of its high stopping power and low heat capacity. Electroplated Bi is usually grown on top of another metal that acts as seed layer, typically gold (Au), making it challenging to extrapolate its thermoelectric properties. In this work, we present four-wire resistance measurement structures that allow u…
▽ More
Electroplated Bismuth (Bi) is commonly used in Transition-Edge Sensors (TESs) for X-rays because of its high stopping power and low heat capacity. Electroplated Bi is usually grown on top of another metal that acts as seed layer, typically gold (Au), making it challenging to extrapolate its thermoelectric properties. In this work, we present four-wire resistance measurement structures that allow us to measure resistance as a function of temperature of electroplated Bi independently of Au. The results show that the thermal conductivity of the Bi at 3 K is high enough to guarantee the correct thermalization of X-ray photons when used as an absorber for TESs.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Beamline Spectroscopy of Integrated Circuits With Hard X-ray Transition Edge Sensors at the Advanced Photon Source
Authors:
T. Guruswamy,
L. Gades,
A. Miceli,
U. Patel,
O. Quaranta
Abstract:
At Argonne National Laboratory, we are developing hard X-ray (2 to 20 keV) Transition Edge Sensor (TES) arrays for beamline science. The significantly improved energy resolution provided by superconducting detectors compared to semiconductor-based energy-dispersive detectors, but with better collection efficiency than wavelength-dispersive instruments, will enable greatly improved X-ray emission a…
▽ More
At Argonne National Laboratory, we are developing hard X-ray (2 to 20 keV) Transition Edge Sensor (TES) arrays for beamline science. The significantly improved energy resolution provided by superconducting detectors compared to semiconductor-based energy-dispersive detectors, but with better collection efficiency than wavelength-dispersive instruments, will enable greatly improved X-ray emission and absorption spectroscopic measurements. A prototype instrument with 24 microwave-frequency multiplexed pixels is now in testing at the Advanced Photon Source (APS) 1-BM beamline. Initial measurements show an energy resolution ten times better (150 eV compared to < 15 eV) than the silicon-drift detectors currently available to APS beamline users, and in particular demonstrate the ability to resolve closely-spaced emission lines in samples containing multiple transition metal elements, such as integrated circuits. Comparing fluorescence spectra of integrated circuits measured with our TESs at the beamline to those measured with silicon detectors, we find emission lines and elements largely hidden (e.g. Hf alongside Cu) from a semiconductor-based detector but well resolved by a TES. This directly shows the strengths of TES-based instruments in fluorescence mapping.
△ Less
Submitted 12 March, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Hard X-ray Fluorescence measurements with TESs at the Advanced Photon Source
Authors:
Tejas Guruswamy,
Lisa M. Gades,
Antonino Miceli,
Umeshkumar M. Patel,
John T. Weizeorick,
Orlando Quaranta
Abstract:
Transition Edge Sensor (TES) spectrometers for hard X-ray beamline science will enable improved X-ray emission and absorption spectroscopy in the information-rich 2 to 20 keV energy range. We are building a TES-based instrument for the Advanced Photon Source (APS) synchrotron, to be made available to beamline users. 24-pixel prototype arrays have recently been fabricated and tested. The first spec…
▽ More
Transition Edge Sensor (TES) spectrometers for hard X-ray beamline science will enable improved X-ray emission and absorption spectroscopy in the information-rich 2 to 20 keV energy range. We are building a TES-based instrument for the Advanced Photon Source (APS) synchrotron, to be made available to beamline users. 24-pixel prototype arrays have recently been fabricated and tested. The first spectroscopy measurements using these arrays are promising, with a best single-pixel energy resolution of 11.2 eV and saturation energy > 20 keV. We present a series of recent X-ray Fluorescence measurements involving transition metal elements and multi-element samples with closely spaced emission lines, in particular a Cu-Ni-Co thin film and a foil of Cu and Hf. The TES-measured spectra are directly compared to spectra measured with silicon drift detectors at an APS beamline, demonstrating the improved X-ray science made possible by TES spectrometers.
△ Less
Submitted 12 September, 2019;
originally announced September 2019.
-
Broadband illumination of superconducting pair breaking photon detectors
Authors:
Tejas Guruswamy,
David J. Goldie,
Stafford Withington
Abstract:
Understanding the detailed behaviour of superconducting pair breaking photon detectors such as Kinetic Inductance Detectors requires knowledge of the nonequilibrium quasiparticle energy distributions. We have previously calculated the steady state distributions resulting from uniform absorption of monochromatic sub gap and above gap frequency radiation by thin films. In this work, we use the same…
▽ More
Understanding the detailed behaviour of superconducting pair breaking photon detectors such as Kinetic Inductance Detectors requires knowledge of the nonequilibrium quasiparticle energy distributions. We have previously calculated the steady state distributions resulting from uniform absorption of monochromatic sub gap and above gap frequency radiation by thin films. In this work, we use the same methods to calculate the effect of illumination by broadband sources, such as thermal radiation from astrophysical phenomena or from the readout system. Absorption of photons at multiple above gap frequencies is shown to not change the structure of the quasiparticle energy distribution close to the superconducting gap. Hence for typical absorbed powers, we find the effects of absorption of broadband pair breaking radiation can simply be considered as the sum of the effects of absorption of many monochromatic sources. Distribution averaged quantities, like quasiparticle generation effciency $η$, match exactly a weighted average over the bandwidth of the source of calculations assuming a monochromatic source. For sub gap frequencies, however, distributing the absorbed power across multiple frequencies does change the low energy quasiparticle distribution. For moderate and high absorbed powers, this results in a significantly larger $η$ - a higher number of excess quasiparticles for a broadband source compared to a monochromatic source of equal total absorbed power. Typically in KIDs the microwave power absorbed has a very narrow bandwidth, but in devices with broad resonance characteristics (low quality factors), this increase in $η$ may be measurable.
△ Less
Submitted 22 February, 2016;
originally announced February 2016.
-
The non-equilibrium response of a superconductor to pair-breaking radiation measured over a broad frequency band
Authors:
P. J. de Visser,
S. J. C. Yates,
T. Guruswamy,
D. J. Goldie,
S. Withington,
A. Neto,
N. Llombart,
A. M. Baryshev,
T. M. Klapwijk,
J. J. A. Baselmans
Abstract:
We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice…
▽ More
We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice the pair-breaking energy. At higher frequencies, the response rises again due to trapping of pair-breaking phonons in the superconductor. In practice this is the first measurement of the frequency dependence of the quasiparticle creation efficiency due to pair-breaking in a superconductor. The efficiency, calculated from the different non-equilibrium quasiparticle distribution functions at each frequency, is in agreement with the measurements.
△ Less
Submitted 22 May, 2015;
originally announced May 2015.
-
Quasiparticle effective temperature in superconducting thin films illuminated at THz frequencies
Authors:
Tejas Guruswamy,
David J. Goldie,
Stafford Withington
Abstract:
The response of superconducting pair-breaking detectors is dependent on the details of the quasiparticle distribution. In Kinetic Inductance Detectors (KIDs), where both pair breaking and non-pair breaking photons are absorbed simultaneously, calculating the detector response therefore requires knowledge of the often nonequilibrium distributions. The quasiparticle effective temperature provides a…
▽ More
The response of superconducting pair-breaking detectors is dependent on the details of the quasiparticle distribution. In Kinetic Inductance Detectors (KIDs), where both pair breaking and non-pair breaking photons are absorbed simultaneously, calculating the detector response therefore requires knowledge of the often nonequilibrium distributions. The quasiparticle effective temperature provides a good approximation to these nonequilibrium distributions. We compare an analytical expression relating absorbed power and the quasiparticle effective temperature in superconducting thin films to full solutions for the nonequilibrium distributions, and find good agreement for a range of materials, absorbed powers, photon frequencies and temperatures typical of KIDs. This analytical expression allows inclusion of nonequilibrium effects in device models without solving for the detailed distributions. We also show our calculations of the frequency dependence of the detector response are in agreement with recent experimental measurements of the response of Ta KIDs at THz frequencies.
△ Less
Submitted 28 April, 2015;
originally announced April 2015.
-
Nonequilibrium superconducting thin films with sub-gap and pair-breaking photon illumination
Authors:
Tejas Guruswamy,
David J. Goldie,
Stafford Withington
Abstract:
We calculate nonequilibrium quasiparticle and phonon distributions for a number of widely-used low transition temperature thin-film superconductors under constant, uniform illumination by sub-gap probe and pair-breaking signal photons simultaneously. From these distributions we calculate material-characteristic parameters that allow rapid evaluation of an effective quasiparticle temperature using…
▽ More
We calculate nonequilibrium quasiparticle and phonon distributions for a number of widely-used low transition temperature thin-film superconductors under constant, uniform illumination by sub-gap probe and pair-breaking signal photons simultaneously. From these distributions we calculate material-characteristic parameters that allow rapid evaluation of an effective quasiparticle temperature using a simple analytical expression, for all materials studied (Mo, Al, Ta, Nb, and NbN) for all photon energies. We also explore the temperature and energy-dependence of the low-energy quasiparticle generation efficiency $η$ by pair-breaking signal photons finding $η\approx 0.6$ in the limit of thick films at low bath temperatures that is material-independent. Taking the energy distribution of excess quasiparticles into account, we find $η\to 1$ as the bath temperature approaches the transition temperature in agreement with the assumption of the two-temperature model of the nonequilibrium response that is appropriate in that regime. The behaviour of $η$ with signal frequency scaled by the superconducting energy gap is also shown to be material-independent, and is in qualitative agreement with recent experimental results. An enhancement of $η$ in the presence of sub-gap (probe) photons is shown to be most significant at signal frequencies near the superconducting gap frequency and arises due to multiple photon absorption events that increase the average energy of excess quasiparticles above that in the absence of the probe.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Quasiparticle generation efficiency in superconducting thin-films
Authors:
T. Guruswamy,
D. J. Goldie,
S. Withington
Abstract:
Thin-film superconductors with thickness 30 to 500 nm are used as non-equilibrium quantum detectors for photons, phonons or more exotic particles. One of the most basic questions in determining their limiting sensitivity is the efficiency with which the quanta of interest couple to the detected quasiparticles. As low temperature superconducting resonators, thin-films are attractive candidates for…
▽ More
Thin-film superconductors with thickness 30 to 500 nm are used as non-equilibrium quantum detectors for photons, phonons or more exotic particles. One of the most basic questions in determining their limiting sensitivity is the efficiency with which the quanta of interest couple to the detected quasiparticles. As low temperature superconducting resonators, thin-films are attractive candidates for producing quantum-sensitive arrayable sensors and the readout uses an additional microwave probe. We have calculated the quasiparticle generation efficiency eta_s for low energy photons in a representative, clean thin-film superconductor (Al) operating well-below its superconductingtransition temperature as a function of film thickness, within the framework of the coupled kineticequations described by Chang and Scalapino.[J. J. Chang and D. J. Scalapino, J. Low Temp. Phys. 31, 1 (1978)]. We have also included the effect of a lower frequency probe. We show that phonon loss from the thin-film reduces eta_s by as much as 40% compared to earlier models that considered relatively thick films or infinite volumes. We also show that the presence of the probe and signal enhances the generation efficiency slightly. We conclude that the ultimate limiting noise equivalent power of this class of detector is determined by the thin-film geometry.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
