Showing 1–50 of 82 results for author: Guo, R

Free Energy Distribution and Relaxation Dynamics Near the First-Order Transition Line

Authors: Ranran Guo, Xiaobing Li, Mingmei Xu, Jinghua Fu, Yuanfang Wu

Abstract: Using the three-dimensional kinetic Ising model with Metropolis algorithm, we calculate the free energy in the whole phase boundary, particularly near the first phase transition line (1st-PTL).The results show that along the 1st-PTL, as the temperature decreases, the energy barrier between the two coexisting phases diverges. This results in more difficulty to reach the equilibrium, i.e., ultra-slo… ▽ More Using the three-dimensional kinetic Ising model with Metropolis algorithm, we calculate the free energy in the whole phase boundary, particularly near the first phase transition line (1st-PTL).The results show that along the 1st-PTL, as the temperature decreases, the energy barrier between the two coexisting phases diverges. This results in more difficulty to reach the equilibrium, i.e., ultra-slow relaxation, which has been recently demonstrated. Meanwhile, we exam the randomness of the equilibrium time. It is found that near the 1st-PTL the equilibrium time is self-diverging, in contrast to the non-self-averaging near the critical point. △ Less

Submitted 21 April, 2025; originally announced April 2025.

Comments: 7 pages, 4 figures

Extending the Low-Frequency Limit of Time-Domain Thermoreflectance via Periodic Waveform Analysis

Authors: Mingzhen Zhang, Tao Chen, Shangzhi Song, Yunjia Bao, Ruiqiang Guo, Weidong Zheng, Puqing Jiang, Ronggui Yang

Abstract: Time-domain thermoreflectance (TDTR) is a powerful technique for characterizing the thermal properties of layered materials. However, its effectiveness at modulation frequencies below 0.1 MHz is hindered by pulse accumulation effects, limiting its ability to accurately measure in-plane thermal conductivities below 6 W/(m K). Here, we present a periodic waveform analysis-based TDTR (PWA-TDTR) metho… ▽ More Time-domain thermoreflectance (TDTR) is a powerful technique for characterizing the thermal properties of layered materials. However, its effectiveness at modulation frequencies below 0.1 MHz is hindered by pulse accumulation effects, limiting its ability to accurately measure in-plane thermal conductivities below 6 W/(m K). Here, we present a periodic waveform analysis-based TDTR (PWA-TDTR) method that extends the measurable frequency range down to 50 Hz with minimal modifications to the conventional setup. This advancement greatly enhances measurement sensitivity, enabling accurate measurements of in-plane thermal conductivities as low as 0.2 W/(m K). We validate the technique by measuring polymethyl methacrylate (PMMA) and fused silica, using PWA-TDTR to obtain in-plane thermal diffusivity and conventional TDTR to measure cross-plane thermal effusivity. Together, these allow the extraction of both thermal conductivity and volumetric heat capacity, with results in excellent agreement with literature values. We further demonstrate the versatility of PWA-TDTR through (1) thermal conductivity and heat capacity measurements of thin liquid films and (2) depth-resolved thermal conductivity profiling in lithium niobate crystals, revealing point defect-induced inhomogeneities at depths up to 100 um. By overcoming frequency and sensitivity constraints, PWA-TDTR significantly expands the applicability of TDTR, enabling detailed investigations of thermal transport in materials and conditions that were previously challenging to study. △ Less

Submitted 20 April, 2025; originally announced April 2025.

Comments: 19 pages, 4 figures

Wave characteristics and anisotropic homogenization theory of soft matters layered structure

Authors: Rui. Guo, Kai Zhang, Nicholas X. Fang

Abstract: We investigate in this work the wave characteristics and homogenization theory of soft matter layered structure in the limit of low-frequency P-wave. Using the method of potentials, we derive closed-form dispersion relationship and identify three distinct modes of the soft matter layered structure: quasistatic mode, resonance mode, and slip mode. These modes differ based on their equivalent interf… ▽ More We investigate in this work the wave characteristics and homogenization theory of soft matter layered structure in the limit of low-frequency P-wave. Using the method of potentials, we derive closed-form dispersion relationship and identify three distinct modes of the soft matter layered structure: quasistatic mode, resonance mode, and slip mode. These modes differ based on their equivalent interface conditions: a continuous interface for quasistatic mode, a spring-like interface for resonance mode, and a slip like interface for slip mode. Additionally, we propose a simplified model capturing P-wave wave characteristics in the S-wave high-frequency regime. Our findings unify wave-structure relationships across solid, liquid, and soft matter composites, offering a predictive framework for engineering metamaterials with programmable wave responses. This study offers new insight on the fundamental understanding of layered media and providing direct design principles for applications in acoustic cloaking, vibration damping, and biomedical imaging. △ Less

Submitted 19 April, 2025; originally announced April 2025.

Comments: 10 pages, 4 figures

Quantum Fluctuation-enhanced Milli-Kelvin Magnetic Refrigeration in Triangular Lattice Magnet GdBO3

Authors: Weijie Lin, Nan Zhao, Zhaoyi Li, Weiran An, Ruixin Guo, Jianqiao Wang, Changzhao Pan, Bo Wen, Jieming Sheng, Liusuo Wu, Shu Guo

Abstract: Rare-earth-based triangular lattice antiferromagnets, with strong quantum fluctuations and weak magnetic interactions, can often retain large magnetic entropy down to very low temperatures, making them excellent candidates for magnetic refrigeration at ultra-low temperatures. These materials exhibit a substantial magnetocaloric effect (MCE) due to enhanced spin fluctuations, particularly near quan… ▽ More Rare-earth-based triangular lattice antiferromagnets, with strong quantum fluctuations and weak magnetic interactions, can often retain large magnetic entropy down to very low temperatures, making them excellent candidates for magnetic refrigeration at ultra-low temperatures. These materials exhibit a substantial magnetocaloric effect (MCE) due to enhanced spin fluctuations, particularly near quantum critical points, which leads to significant changes in magnetic entropy. This study reports on the crystal growth, structure, magnetism, and MCE of a Gd-based triangular lattice material, GdBO3, characterized by a large spin quantum number (S = 7/2). Successive phase transitions (T1 = 0.52 K, T2 = 0.88 K, and T3 = 1.77 K) were observed in zero-field specific heat measurements. Furthermore, thermal dynamic analysis under external magnetic fields identified five distinct phase regions and three quantum critical points for GdBO3. Due to its broad specific heat features and the high density of magnetic Gd3+ ions, we achieved a minimum temperature of 50 mK near the field-induced quantum critical point, using a custom-designed GdBO3-based adiabatic demagnetization refrigerator. Our findings reveal significant quantum fluctuations below 2 K, demonstrating GdBO3's potential for milli-Kelvin magnetic cooling applications. △ Less

Submitted 11 April, 2025; originally announced April 2025.

POINT$^{2}$: A Polymer Informatics Training and Testing Database

Authors: Jiaxin Xu, Gang Liu, Ruilan Guo, Meng Jiang, Tengfei Luo

Abstract: The advancement of polymer informatics has been significantly propelled by the integration of machine learning (ML) techniques, enabling the rapid prediction of polymer properties and expediting the discovery of high-performance polymeric materials. However, the field lacks a standardized workflow that encompasses prediction accuracy, uncertainty quantification, ML interpretability, and polymer sy… ▽ More The advancement of polymer informatics has been significantly propelled by the integration of machine learning (ML) techniques, enabling the rapid prediction of polymer properties and expediting the discovery of high-performance polymeric materials. However, the field lacks a standardized workflow that encompasses prediction accuracy, uncertainty quantification, ML interpretability, and polymer synthesizability. In this study, we introduce POINT$^{2}$ (POlymer INformatics Training and Testing), a comprehensive benchmark database and protocol designed to address these critical challenges. Leveraging the existing labeled datasets and the unlabeled PI1M dataset, a collection of approximately one million virtual polymers generated via a recurrent neural network trained on the realistic polymers, we develop an ensemble of ML models, including Quantile Random Forests, Multilayer Perceptrons with dropout, Graph Neural Networks, and pretrained large language models. These models are coupled with diverse polymer representations such as Morgan, MACCS, RDKit, Topological, Atom Pair fingerprints, and graph-based descriptors to achieve property predictions, uncertainty estimations, model interpretability, and template-based polymerization synthesizability across a spectrum of properties, including gas permeability, thermal conductivity, glass transition temperature, melting temperature, fractional free volume, and density. The POINT$^{2}$ database can serve as a valuable resource for the polymer informatics community for polymer discovery and optimization. △ Less

Submitted 30 March, 2025; originally announced March 2025.

Visualizing Nanodomain Superlattices in Halide Perovskites Giving Picosecond Quantum Transients

Authors: Dengyang Guo, Thomas A. Selby, Simon Kahmann, Sebastian Gorgon, Linjie Dai, Milos Dubajic, Terry Chien-Jen Yang, Simon M. Fairclough, Thomas Marsh, Ian E. Jacobs, Baohu Wu, Renjun Guo, Satyawan Nagane, Tiarnan A. S. Doherty, Kangyu Ji, Cheng Liu, Yang Lu, Taeheon Kang, Capucine Mamak, Jian Mao, Peter Müller-Buschbaum, Henning Sirringhaus, Paul A. Midgley, Samuel D. Stranks

Abstract: The high optoelectronic quality of halide perovskites lends them to be utilized in optoelectronic devices and recently in emerging quantum emission applications. Advancements in perovskite nanomaterials have led to the discovery of processes in which luminescence decay times are sub-100 picoseconds, stimulating the exploration of even faster radiative rates for advanced quantum applications, which… ▽ More The high optoelectronic quality of halide perovskites lends them to be utilized in optoelectronic devices and recently in emerging quantum emission applications. Advancements in perovskite nanomaterials have led to the discovery of processes in which luminescence decay times are sub-100 picoseconds, stimulating the exploration of even faster radiative rates for advanced quantum applications, which have only been prominently realised in III-V materials grown through costly epitaxial growth methods. Here, we discovered ultrafast quantum transients of time scales ~2 picoseconds at low temperature in bulk formamidinium lead iodide films grown through scalable solution or vapour approaches. Using a multimodal strategy, combining ultrafast spectroscopy, optical and electron microscopy, we show that these transients originate from quantum tunnelling in nanodomain superlattices. The outcome of the transient decays, photoluminescence, mirrors the photoabsorption of the states, with an ultra-narrow linewidth at low temperature as low as <2 nm (~4 meV). Localized correlation of the emission and structure reveals that the nanodomain superlattices are formed by alternating ordered layers of corner sharing and face sharing octahedra. This discovery opens new applications leveraging intrinsic quantum properties and demonstrates powerful multimodal approaches for quantum investigations. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Comments: Main text and supplementary information. Main text 18 pages, 4 figures. Supplementary information 47 pages, 34 figures

A Tale of Two Sides of Wafer: Physical Implementation and Block-Level PPA on Flip FET with Dual-sided Signals

Authors: Haoran Lu, Xun Jiang, Yanbang Chu, Ziqiao Xu, Rui Guo, Wanyue Peng, Yibo Lin, Runsheng Wang, Heng Wu, Ru Huang

Abstract: As the conventional scaling of logic devices comes to an end, functional wafer backside and 3D transistor stacking are consensus for next-generation logic technology, offering considerable design space extension for powers, signals or even devices on the wafer backside. The Flip FET (FFET), a novel transistor architecture combining 3D transistor stacking and fully functional wafer backside, was re… ▽ More As the conventional scaling of logic devices comes to an end, functional wafer backside and 3D transistor stacking are consensus for next-generation logic technology, offering considerable design space extension for powers, signals or even devices on the wafer backside. The Flip FET (FFET), a novel transistor architecture combining 3D transistor stacking and fully functional wafer backside, was recently proposed. With symmetric dual-sided standard cell design, the FFET can deliver around 12.5% cell area scaling and faster but more energy-efficient libraries beyond other stacked transistor technologies such as CFET. Besides, thanks to the novel cell design with dual-sided pins, the FFET supports dual-sided signal routing, delivering better routability and larger backside design space. In this work, we demonstrated a comprehensive FFET evaluation framework considering physical implementation and block-level power-performance-area (PPA) assessment for the first time, in which key functions are dual-sided routing and dual-sided RC extraction. A 32-bit RISC-V core was used for the evaluation here. Compared to the CFET with single-sided signals, the FFET with single-sided signals achieved 23.3% post-P&R core area reduction, 25.0% higher frequency and 11.9% lower power at the same utilization, and 16.0 % higher frequency at the same core area. Meanwhile, the FFET supports dual-sided signals, which can further benefit more from flexible allocation of cell input pins on both sides. By optimizing the input pin density and BEOL routing layer number on each side, 10.6% frequency gain was realized without power degradation compared to the one with single-sided signal routing. Moreover, the routability and power efficiency of FFET barely degrades even with the routing layer number reduced from 12 to 5 on each side, validating the great space for cost-friendly design enabled by FFET. △ Less

Submitted 25 January, 2025; originally announced January 2025.

Comments: Accepted by DATE 2025

Journal ref: Proc. of DATE 2025

Relaxation behavior near the first-order phase transition line

Authors: Xiaobing Li, Ranran Guo, Mingmei Xu, Jinghua Fu, Lizhu Chen, Yu Zhou, Yuanfang Wu

Abstract: Using the Metropolis algorithm, we simulate the relaxation process of the three-dimensional kinetic Ising model. Starting from a random initial configuration, we first present the average equilibration time across the entire phase boundary. It is observed that the average equilibration time increases significantly as the temperature decreases far from the critical temperature $T_{\rm c}$. The aver… ▽ More Using the Metropolis algorithm, we simulate the relaxation process of the three-dimensional kinetic Ising model. Starting from a random initial configuration, we first present the average equilibration time across the entire phase boundary. It is observed that the average equilibration time increases significantly as the temperature decreases far from the critical temperature $T_{\rm c}$. The average equilibration time along the first-order phase transition (1st-PT) line exhibits an ultra-slow relaxation. We also investigate the dynamic scaling behavior with system sizes, and find that dynamic scaling holds not only near $T_{\rm c}$, but also at $T\ll T_{\rm c}$. The dynamic exponent at $T\ll T_{\rm c}$ is larger than that near $T_{\rm c}$. Additionally, we analyze the dynamic scaling of the average autocorrelation time and find that it depends on system size only near $T_{\rm c}$, while it becomes size-independent both above and below $T_{\rm c}$. The extremely slow relaxation dynamics observed near the 1st-PT is attributed to the complex structure of the free energy. △ Less

Submitted 24 January, 2025; v1 submitted 25 December, 2024; originally announced December 2024.

Comments: 7 pages, 4 figures

Unusual topological polar texture in moiré ferroelectrics

Authors: Yuhao Li, Yuanhao Wei, Ruiping Guo, Yifei Wang, Hanhao Zhang, Takashi Taniguchi, Kenji Watanabe, Yan Shi, Yi Shi, Chong Wang, Zaiyao Fei

Abstract: Topological polar textures in ferroelectrics have attracted significant interest for their potential for energy-efficient and high-density data storage and processing. Among these, polar merons and antimerons are predicted in strained and twisted bilayers of inversion symmetry broken systems. However, experimental observation of these polar textures within twisted two-dimensional van der Waals (2D… ▽ More Topological polar textures in ferroelectrics have attracted significant interest for their potential for energy-efficient and high-density data storage and processing. Among these, polar merons and antimerons are predicted in strained and twisted bilayers of inversion symmetry broken systems. However, experimental observation of these polar textures within twisted two-dimensional van der Waals (2D vdW) materials remains challenging. Here, we utilize vector piezoresponse force microscopy (PFM) to reconstruct the polarization fields in R-type marginally twisted hexagonal boron nitride (hBN). We observe alternating out-of-plane (OOP) polarizations at domain regions and in-plane (IP) vortex-like polarization patterns along domain walls (DWs), indicative of a network of polar merons and antimerons. Notably, the OOP polarization exhibits three polarity reversals across a DW. Similar polar textures are identified in marginally twisted MoSe2 and WSe2 homobilayers. Our theoretical simulations attribute these unusual polarization reversals near the DWs to the competition between moiré ferroelectricity and piezoelectricity. These results provide experimental evidence of complex polar textures in moiré ferroelectrics, offering new insights into the electronic band topology in twisted transition metal dichalcogenides (TMDCs). △ Less

Submitted 24 December, 2024; originally announced December 2024.

Magnetorotons in Moiré Fractional Chern Insulators

Authors: Xiaoyang Shen, Chonghao Wang, Xiaodong Hu, Ruiping Guo, Hong Yao, Chong Wang, Wenhui Duan, Yong Xu

Abstract: The discovery of fractional Chern insulators (FCIs) unlocks exciting opportunities to explore emergent physical excitations arising from topological and geometric effects in novel phases of quantum matter. Here we investigate the intraband neutral excitations, namely magnetorotons, in moiré FCIs within twisted $\rm{MoTe}_2$ by applying the Girvin, MacDonald, and Platzman (GMP) ansatz together with… ▽ More The discovery of fractional Chern insulators (FCIs) unlocks exciting opportunities to explore emergent physical excitations arising from topological and geometric effects in novel phases of quantum matter. Here we investigate the intraband neutral excitations, namely magnetorotons, in moiré FCIs within twisted $\rm{MoTe}_2$ by applying the Girvin, MacDonald, and Platzman (GMP) ansatz together with the method of dynamical geometric response. We reveal the universal existence of the finite-momentum magnetorotons in moiré FCIs and predict their characteristic scales. Furthermore, we explore the geometric nature of magnetorotons in the long-wavelength limit, identifying their gapped chiral nature with angular momentum-2, which originates from the momentum-space incompressibility of FCIs. Utilizing the excellent tunability of moiré systems, we extend our analysis to other incompressible phases and uncover the dynamical properties of geometric excitations influenced by quantum phase transitions. Finally, we provide experimental proposals for detecting and advancing the study of intraband neutral excitations in moiré FCIs. △ Less

Submitted 21 February, 2025; v1 submitted 2 December, 2024; originally announced December 2024.

Comments: 5+9 pages

Simultaneous Measurement of Thermal Conductivity, Heat Capacity, and Interfacial Thermal Conductance by Leveraging Negative Delay-Time Data in Time-Domain Thermoreflectance

Authors: Mingzhen Zhang, Tao Chen, Ao Zeng, Jialin Tang, Ruiqiang Guo, Puqing Jiang

Abstract: Time-domain thermoreflectance (TDTR) is a widely used technique for characterizing the thermal properties of bulk and thin-film materials. Traditional TDTR analyses typically focus on positive delay time data for fitting, often requiring multiple-frequency measurements to simultaneously determine thermal conductivity and heat capacity. However, this multiple-frequency approach is cumbersome and ma… ▽ More Time-domain thermoreflectance (TDTR) is a widely used technique for characterizing the thermal properties of bulk and thin-film materials. Traditional TDTR analyses typically focus on positive delay time data for fitting, often requiring multiple-frequency measurements to simultaneously determine thermal conductivity and heat capacity. However, this multiple-frequency approach is cumbersome and may introduce inaccuracies due to inconsistencies across different frequency measurements. In this study, we propose a novel solution to these challenges by harnessing the often-overlooked negative delay time data in TDTR. By integrating these data points, we offer a streamlined, single-frequency method that simultaneously measures thermal conductivity, heat capacity, and interface thermal conductance for both bulk and thin-film materials, enhancing measurement efficiency and accuracy. We demonstrate the effectiveness of this method by measuring several bulk samples including sapphire, silicon, diamond, and Si0.992Ge0.008, and several thin-film samples including a 1.76-μm-thick gallium nitride (GaN) film epitaxially grown on a silicon substrate, a 320-nm-thick gallium oxide (ε-Ga2O3) film epitaxially grown on a silicon carbide substrate, and a 330-nm-thick tantalum nitride (TaN) film deposited on a sapphire substrate, all coated with an aluminum (Al) transducer layer on the surface. Our results show that the new method accurately determines the thermal conductivity and heat capacity of these samples as well as the Al/sample interface thermal conductance using a single modulation frequency, except for the Si0.992Ge0.008 sample. This study sheds light on the untapped potential of TDTR, offering a new, efficient, and accurate avenue for thermal analysis in material science. △ Less

Submitted 24 November, 2024; originally announced November 2024.

Deep Band Crossings Enhanced Nonlinear Optical Effects

Authors: Nianlong Zou, He Li, Meng Ye, Haowei Chen, Minghui Sun, Ruiping Guo, Yizhou Liu, Bing-Lin Gu, Wenhui Duan, Yong Xu, Chong Wang

Abstract: Nonlinear optical (NLO) effects in materials with band crossings have attracted significant research interests due to the divergent band geometric quantities around these crossings. Most current research has focused on band crossings between the valence and conduction bands. However, such crossings are absent in insulators, which are more relevant for NLO applications. In this work, we demonstrate… ▽ More Nonlinear optical (NLO) effects in materials with band crossings have attracted significant research interests due to the divergent band geometric quantities around these crossings. Most current research has focused on band crossings between the valence and conduction bands. However, such crossings are absent in insulators, which are more relevant for NLO applications. In this work, we demonstrate that NLO effects can be significantly enhanced by band crossings within the valence or conduction bands, which we designate as "deep band crossings" (DBCs). As an example, in two dimensions, we show that shift conductivity can be substantially enhanced or even divergent due to a mirror-protected "deep Dirac nodal point". In three dimensions, we propose GeTe as an ideal material where shift conductivity is enhanced by "deep Dirac nodal lines". The ubiquity of this enhancement is further confirmed by high-throughput calculations. Other types of DBCs and NLO effects are also discussed. By manipulating band crossings between arbitrary bands, our work offers a simple, practical, and universal way to greatly enhance NLO effects. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Fractional Chern insulators in moiré flat bands with high Chern numbers

Authors: Chonghao Wang, Xiaoyang Shen, Ruiping Guo, Chong Wang, Wenhui Duan, Yong Xu

Abstract: Recent discoveries of zero-field fractional Chern insulators in moiré materials have attracted intensive research interests. However, most current theoretical and experimental attempts focus on systems with low Chern number bands, in analogy to the Landau levels. Here we propose candidate material systems for realizing fractional Chern insulators with higher Chern numbers. The material setup invol… ▽ More Recent discoveries of zero-field fractional Chern insulators in moiré materials have attracted intensive research interests. However, most current theoretical and experimental attempts focus on systems with low Chern number bands, in analogy to the Landau levels. Here we propose candidate material systems for realizing fractional Chern insulators with higher Chern numbers. The material setup involves $Γ$-valley twisted homobilayer transition metal dichalcogenides in proximity to a skyrmion lattice. The skyrmion exchange potential induces a flat band with a high Chern number $C = -2$. Using the momentum-space projected exact diagonalization method, we perform a comprehensive study at various filling factors, confirming the generalized Jain series. Our research provides theoretical guidance on realizing unconventional fractional Chern insulators beyond the Landau level picture. △ Less

Submitted 6 August, 2024; originally announced August 2024.

Comments: 6 pages, 4 figures

Enhancing and Mapping Thermal Boundary Conductance across Bonded Si/SiC Interface

Authors: Rulei Guo, Bin Xu, Fengwen Mu, Junichiro Shiomi

Abstract: SiC is a promising substrate for Si-on-insulator (SOI) wafers for efficient thermal management owing to its high thermal conductivity and large bandgap. However, fabricating a Si device layer on a SiC substrate with a high and uniform thermal-boundary conductance (TBC) at the wafer scale is challenging. In this study, a 4-inch Si-on-SiC wafer was fabricated using a room-temperature surface-activat… ▽ More SiC is a promising substrate for Si-on-insulator (SOI) wafers for efficient thermal management owing to its high thermal conductivity and large bandgap. However, fabricating a Si device layer on a SiC substrate with a high and uniform thermal-boundary conductance (TBC) at the wafer scale is challenging. In this study, a 4-inch Si-on-SiC wafer was fabricated using a room-temperature surface-activated bonding method, and the TBC was measured using the time-domain thermoreflectance (TDTR) method. The obtained TBC was 109 MW/m2K in the as-bonded sample, improving to 293 MW/m2K after annealing at 750 oC, representing a 78% increase compared to previously reported values for a Si-SiC interface formed by bonding methods. Such enhancement is attributed to the absence of an oxide layer at the interface. Furthermore, we assessed the actual spatial distribution of the TBC in the SOI system by combining the TDTR mapping with a mathematical model to remove the influence of random errors in the experiment. The spatial distributions before and after annealing were 7% and 17%, respectively. Such variation highlights the need to consider the TBC distribution when designing thermal management systems. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Polaron-assisted dielectric relaxation processes in donor-doped BaTiO3-based ceramics

Authors: T. H. T. Rosa, M. A. Oliveira, Y. Mendez-Gonzalez, F. Guerrero, R. Guo, A. S. Bhalla, J. D. S. Guerra

Abstract: Perovskite structure materials based on the Ba1-xGdxTiO3 system, where x = 0.001, 0.002, 0.003, 0.004 and 0.005, were prepared via the Pechini chemical synthesis route. The dielectric properties have been analyzed over a wide temperature and frequency range, revealing a significant contribution of the conduction mechanisms in the dielectric response of the studied ceramics. In fact, by using the D… ▽ More Perovskite structure materials based on the Ba1-xGdxTiO3 system, where x = 0.001, 0.002, 0.003, 0.004 and 0.005, were prepared via the Pechini chemical synthesis route. The dielectric properties have been analyzed over a wide temperature and frequency range, revealing a significant contribution of the conduction mechanisms in the dielectric response of the studied ceramics. In fact, by using the Davidson-Cole formalism, the observed electrical behavior was found to be associated with relaxation processes related to intrinsic defects mobility promoted by a thermally-activated polaronic mechanism. The obtained values of the activation energy for the relaxation processes, estimated from the Arrhenius law for the mean relaxation time, revealed a decrease from 0.29 up to 0.21 eV as the Gd-doping concentration increases, which suggests the conduction process to be associated with the polaronic effects due to the coexistence of Ti4+ and Ti3+ ions in the structure. Analysis from the conductivity formalism, by using the Jonscher universal power-law, confirmed the polaron-type conduction mechanism for the dielectric dispersion, as suggested by the dielectric analysis, being the nature of the hopping mechanism governed by small polaron hopping (SPH) charge transport in the studied Ba1-xGdxTiO3 ceramics. △ Less

Submitted 13 June, 2024; v1 submitted 8 June, 2024; originally announced June 2024.

Comments: 26 pages, 9 figures, 1 table

Journal ref: Journal of Alloys and Compounds 1008 (2024) 176510

Ineffectiveness of Formamidine in Suppressing Ultralow Thermal Conductivity in Cubic Hybrid Perovskite FAPbI3

Authors: Jiongzhi Zheng, Zheng Chang, Changpeng Lin, Chongjia Lin, Yanguang Zhou, Baoling Huang, Ruiqiang Guo, Geoffroy Hautier

Abstract: Fundamentally understanding the lattice dynamics and microscopic mechanisms of thermal transport in cubic hybrid organic-inorganic perovskites remains elusive, primarily due to their strong anharmonicity and frequent phase transitions. In this work, we comprehensively investigate the thermal transport behavior in cubic hybrid perovskite FAPbI3, integrating first principles-based anharmonic lattice… ▽ More Fundamentally understanding the lattice dynamics and microscopic mechanisms of thermal transport in cubic hybrid organic-inorganic perovskites remains elusive, primarily due to their strong anharmonicity and frequent phase transitions. In this work, we comprehensively investigate the thermal transport behavior in cubic hybrid perovskite FAPbI3, integrating first principles-based anharmonic lattice dynamics with a linearized Wigner transport formula. The Temperature Dependent Effective Potential (TDEP) technique allows us to stabilize the negative soft modes, primarily dominated by organic cations, at finite temperatures in cubic FAPbI3. We then predict an ultra-low thermal conductivity of ~0.63 Wm^(-1) K^(-1) in cubic FAPbI3 at 300 K, with a temperature dependence of T^(-0.740), suggesting a good crystalline nature of phonon transport. Notably, the ultra-low thermal conductivity in cubic FAPbI3 is primarily attributed to the [PbI3]1- units, challenging the conventional focus on organic FA+ cations. This shift in focus is due to the presence of Pb(s)-I(p) anti-bonding sates within the [PbI3]1- units. Furthermore, thermal transport in cubic FAPbI3 is predominantly governed by the particle-like phonon propagation channel across the entire temperature range of 300-500 K, a result of diminished suppression of low-frequency phonons by FA+ cations and large inter-branch spacings. Finally, our findings underscore that the anharmonic force constants are highly temperature-sensitive, leading to underestimations of thermal conductivity when relying on 0-K anharmonic force constants. Our study not only elucidates the microscopic mechanisms of thermal transport in cubic FAPbI3 but also provides a crucial framework for the discovery, design, and understanding of hybrid organic-inorganic compounds with ultra-low thermal conductivity. △ Less

Submitted 14 May, 2025; v1 submitted 3 June, 2024; originally announced June 2024.

"Stumbling-to-Fetters" mechanism and Virginia Creeper model in hydrogel for designing bionic cardiovascular system

Authors: Hanqing Dai, Wenqing Dai, Yuanyuan Chen, Wanlu Zhang, Yimeng Wang, Ruiqian Guo, Guoqi Zhang

Abstract: Manufacturing hydrogels with identical electrochemical properties are typically riddled with unresolved inquiries and challenges. Here, we utilized ultra-light graphene flakes to trace the influence of convection phenomena during reactions on hydrogels' formation and structural non-uniformity, elucidating its mechanisms. Furthermore, we confirmed that an external electric field induced the orienta… ▽ More Manufacturing hydrogels with identical electrochemical properties are typically riddled with unresolved inquiries and challenges. Here, we utilized ultra-light graphene flakes to trace the influence of convection phenomena during reactions on hydrogels' formation and structural non-uniformity, elucidating its mechanisms. Furthermore, we confirmed that an external electric field induced the orientation of functional groups of hydrogels along the direction of this field, revealing the mechanism of its influence on the structural non-uniformity and electrochemical properties of hydrogels. Additionally, we discovered that ion diffusion was "Stumbling-to-Fetters" by the functional groups on the polymer chains within the hydrogel, unveiling this mechanism and developing the Virginia Creeper (VC) model for hydrogels. We demonstrated the scalability and application of the VC model. Furthermore, we proposed a molecular-ion diffusion and current decay equation to describe the electrochemical properties of hydrogels. As an application of the VC model, we developed a bionic cardiovascular system and proved its potential to seamlessly interface with living organisms and generate bio-like bioelectricity. Our findings provide novel insights into triboelectricity and guidance for producing hydrogels with identical electrochemical properties, and offer a new pathway for bioelectric generation and the design of new hydrogel devices. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Stabilizing fractional Chern insulators via exchange interaction in moiré systems

Authors: Xiaoyang Shen, Chonghao Wang, Ruiping Guo, Zhiming Xu, Wenhui Duan, Yong Xu

Abstract: Recent experimental discovery of fractional Chern insulator in moiré Chern band in twisted transition metal dichalocogenide homobilayers has sparked intensive interest in exploring the ways of engineering band topology and correlated states in moiré systems. In this letter, we demonstrate that, with an additional exchange interaction induced by proximity effect, the topology and bandwidth of the m… ▽ More Recent experimental discovery of fractional Chern insulator in moiré Chern band in twisted transition metal dichalocogenide homobilayers has sparked intensive interest in exploring the ways of engineering band topology and correlated states in moiré systems. In this letter, we demonstrate that, with an additional exchange interaction induced by proximity effect, the topology and bandwidth of the moiré minibands of twisted $\mathrm{MoTe_2}$ homobilayers can be easily tuned. Fractional Chern insulators at -2/3 filling are found to appear at enlarged twist angles over a large range of twist angles with enhanced many-body gaps. We further discover a topological phase transition between the fractional Chern insulator, quantum anomalous Hall crystal, and charge density wave. Our results shed light on the interplay between topology and correlation physics. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 7 pages, 4 figures

Low thermal boundary resistance at bonded GaN/diamond interface by controlling ultrathin heterogeneous amorphous layer

Authors: Bin Xu, Fengwen Mu, Yingzhou Liu, Rulei Guo, Shiqian Hu, Junichiro Shiomi

Abstract: Thermal boundary resistance (TBR) in semiconductor-on-diamond structure bottlenecks efficient heat dissipation in electronic devices. In this study, to reduce the TBR between GaN and diamond, surface-activated bonding with a hybrid SiOx-Ar ion source was applied to achieve an ultrathin interfacial layer. The simultaneous surface activation and slow deposition of the SiOx binder layer enabled preci… ▽ More Thermal boundary resistance (TBR) in semiconductor-on-diamond structure bottlenecks efficient heat dissipation in electronic devices. In this study, to reduce the TBR between GaN and diamond, surface-activated bonding with a hybrid SiOx-Ar ion source was applied to achieve an ultrathin interfacial layer. The simultaneous surface activation and slow deposition of the SiOx binder layer enabled precise control over layer thickness (2.5-5.3 nm) and formation of an amorphous heterogeneous nanostructure comprising a SiOx region between two inter-diffusion regions. Crucially, the 2.5-nm-thick interfacial layer achieved a TBR of 8.3 m2-W/GW, a record low for direct-bonded GaN/diamond interface. A remarkable feature is that the TBR is extremely sensitive to the interfacial thickness; rapidly increasing to 34 m2-K/GW on doubling the thickness to 5.3 nm. Theoretical analysis revealed the origin of this increase: a diamond/SiOx interdiffusion layer extend the vibrational frequency, far-exceeding that of crystalline diamond, which increases the lattice vibrational mismatch and suppresses phonon transmission. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Superior Polymeric Gas Separation Membrane Designed by Explainable Graph Machine Learning

Authors: Jiaxin Xu, Agboola Suleiman, Gang Liu, Michael Perez, Renzheng Zhang, Meng Jiang, Ruilan Guo, Tengfei Luo

Abstract: Gas separation using polymer membranes promises to dramatically drive down the energy, carbon, and water intensity of traditional thermally driven separation, but developing the membrane materials is challenging. Here, we demonstrate a novel graph machine learning (ML) strategy to guide the experimental discovery of synthesizable polymer membranes with performances simultaneously exceeding the emp… ▽ More Gas separation using polymer membranes promises to dramatically drive down the energy, carbon, and water intensity of traditional thermally driven separation, but developing the membrane materials is challenging. Here, we demonstrate a novel graph machine learning (ML) strategy to guide the experimental discovery of synthesizable polymer membranes with performances simultaneously exceeding the empirical upper bounds in multiple industrially important gas separation tasks. Two predicted candidates are synthesized and experimentally validated to perform beyond the upper bounds for multiple gas pairs (O2/N2, H2/CH4, and H2/N2). Notably, the O2/N2 separation selectivity is 1.6-6.7 times higher than existing polymer membranes. The molecular origin of the high performance is revealed by combining the inherent interpretability of our ML model, experimental characterization, and molecule-level simulation. Our study presents a unique explainable ML-experiment combination to tackle challenging energy material design problems in general, and the discovered polymers are beneficial for industrial gas separation. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Journal ref: Cell Reports Physical Science, Volume 5, Issue 7, 2024, 102067, ISSN 2666-3864

Superconductivity of the New Medium-Entropy Alloy V4Ti2W with a Body-Centered Cubic Structure

Authors: Kuan Li, Weijie Lin, Ruixin Guo, Shu Guo, Lingyong Zeng, Longfu Li, Peifeng Yu, Kangwang Wang, Chao Zhang, Huixia Luo

Abstract: Medium- and high-entropy alloy (MEA and HEA) superconductors have attracted considerable interest since their discovery. This paper reports the superconducting properties of ternary tungsten-containing MEA V4Ti2W for the first time. V4Ti2W is a type II superconductor with a body-centered cubic (BCC) structure. Experimental results of resistivity, magnetization, and heat capacity indicate that the… ▽ More Medium- and high-entropy alloy (MEA and HEA) superconductors have attracted considerable interest since their discovery. This paper reports the superconducting properties of ternary tungsten-containing MEA V4Ti2W for the first time. V4Ti2W is a type II superconductor with a body-centered cubic (BCC) structure. Experimental results of resistivity, magnetization, and heat capacity indicate that the superconducting transition temperature of the MEA V4Ti2W is roughly 5.0 K. The critical magnetic fields at the upper and lower ends are 9.93(2) T and 40.7(3) mT, respectively. Interestingly, few BCC MEA superconductors with VEC greater than 4.8 have been found. The addition of tungsten leads to a VEC of 4.83 e/a for V4Ti2W, which is rarely higher than the 4.8 value. Adding tungsten element expands the variety of MEA alloys, which may improve the microstructure and mechanical properties of materials and even superconducting properties. This material could potentially offer a new platform for the investigation of innovative MEA and HEA superconductors. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: 20 pages, 6 figures

Journal ref: Materials Today Communications, 2024, 38, 108444

Nonequilibrium magnonic thermal transport engineering

Authors: Takamasa Hirai, Toshiaki Morita, Subrata Biswas, Jun Uzuhashi, Takashi Yagi, Yuichiro Yamashita, Varun Kushwaha Kumar, Fuya Makino, Rajkumar Modak, Yuya Sakuraba, Tadakatsu Ohkubo, Rulei Guo, Bin Xu, Junichiro Shiomi, Daichi Chiba, Ken-ichi Uchida

Abstract: Thermal conductivity, a fundamental parameter characterizing thermal transport in solids, is typically determined by electron and phonon transport. Although other transport properties including electrical conductivity and thermoelectric conversion coefficients have material-specific values, it is known that thermal conductivity can be modulated artificially via phonon engineering techniques. Here,… ▽ More Thermal conductivity, a fundamental parameter characterizing thermal transport in solids, is typically determined by electron and phonon transport. Although other transport properties including electrical conductivity and thermoelectric conversion coefficients have material-specific values, it is known that thermal conductivity can be modulated artificially via phonon engineering techniques. Here, we demonstrate another way of artificially modulating the heat conduction in solids: magnonic thermal transport engineering. The time-domain thermoreflectance measurements using ferromagnetic metal/insulator junction systems reveal that the thermal conductivity of the ferromagnetic metals and interfacial thermal conductance vary significantly depending on the spatial distribution of nonequilibrium spin currents. Systematic measurements of the thermal transport properties with changing the boundary conditions for spin currents show that the observed thermal transport modulation stems from magnon origin. This observation unveils that magnons significantly contribute to the heat conduction even in ferromagnetic metals at room temperature, upsetting the conventional wisdom that the thermal conductivity mediated by magnons is very small in metals except at low temperatures. The magnonic thermal transport engineering offers a new principle and method for active thermal management. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Extrinsic Contribution to Nonlinear Current Induced Spin Polarization

Authors: Ruda Guo, Yue-Xin Huang, Xiaoxin Yang, Yi Liu, Cong Xiao, Zhe Yuan

Abstract: Nonlinear spin polarization occurring in the second order of driving electric current is the dominant source of nonequilibrium magnetization in centrosymmetric or weakly noncentrosymmetric nonmagnetic materials, and induces nonlinear spin-orbit torque in magnets. Up to now, only the intrinsic mechanism based on anomalous spin polarizability dipole, which is the spin counterpart of Berry curvature… ▽ More Nonlinear spin polarization occurring in the second order of driving electric current is the dominant source of nonequilibrium magnetization in centrosymmetric or weakly noncentrosymmetric nonmagnetic materials, and induces nonlinear spin-orbit torque in magnets. Up to now, only the intrinsic mechanism based on anomalous spin polarizability dipole, which is the spin counterpart of Berry curvature dipole, has been studied, while disorder induced mechanisms are still missing. Here, we derive these contributions, which include not only the anomalous distribution function due to skew scattering and coordinate shift, but also interband coherence effects given by disorder induced spin shift and electric field induced anomalous scattering amplitude. We demonstrate these terms and show their importance in a minimal model. A scaling law for nonlinear current-induced spin polarization is constructed, which may help analyze experimental data in the future. △ Less

Submitted 7 March, 2024; v1 submitted 12 February, 2024; originally announced February 2024.

Dirac mass induced by optical gain and loss

Authors: Letian Yu, Haoran Xue, Ruixiang Guo, Eng Aik Chan, Yun Yong Terh, Cesare Soci, Baile Zhang, Y. D. Chong

Abstract: Mass is commonly regarded as an intrinsic property of matter, but modern physics reveals particle masses to have complex origins, such as the Higgs mechanism in high-energy physics. In crystal lattices such as graphene, relativistic Dirac particles can exist as low-energy quasiparticles with masses imparted by lattice symmetry-breaking perturbations. These mass-generating mechanisms all assume Her… ▽ More Mass is commonly regarded as an intrinsic property of matter, but modern physics reveals particle masses to have complex origins, such as the Higgs mechanism in high-energy physics. In crystal lattices such as graphene, relativistic Dirac particles can exist as low-energy quasiparticles with masses imparted by lattice symmetry-breaking perturbations. These mass-generating mechanisms all assume Hermiticity, or the conservation of energy in detail. Using a photonic synthetic lattice, we show experimentally that Dirac masses can be generated via non-Hermitian perturbations based on optical gain and loss. We then explore how the space-time engineering of the gain/loss-induced Dirac mass affects the quasiparticles. As we show, the quasiparticles undergo Klein tunnelling at spatial boundaries, but a local breaking of a non-Hermitian symmetry can produce a novel flux nonconservation effect at the domain walls. At a temporal boundary that abruptly flips the sign of the Dirac mass, we observe a variant of the time reflection phenomenon: in the nonrelativistic limit, the Dirac quasiparticle reverses its velocity, while in the relativistic limit the original velocity is retained. △ Less

Submitted 14 April, 2024; v1 submitted 27 January, 2024; originally announced January 2024.

Different effects of suprathermal electrons and ions on drift instabilities in non-uniform plasmas

Authors: Ran Guo

Abstract: The paper studies the drift instability in Kappa-distributed inhomogeneous plasmas. Weak inhomogeneity and local approximation are assumed. The linear dispersion relation is expressed in a novel integral representation that involves the standard plasma dispersion functions defined in Maxwellian plasmas rather than the generalized plasma dispersion function modified by the Kappa distribution. The a… ▽ More The paper studies the drift instability in Kappa-distributed inhomogeneous plasmas. Weak inhomogeneity and local approximation are assumed. The linear dispersion relation is expressed in a novel integral representation that involves the standard plasma dispersion functions defined in Maxwellian plasmas rather than the generalized plasma dispersion function modified by the Kappa distribution. The analytical solutions of wave frequency and growth rate are derived when the wave speed is larger than the ion thermal speed but smaller than the electron thermal speed. The unstable drift mode is found to have a lower limit of wavenumber due to the suprathermal electrons, which does not exist in Maxwellian plasmas. The population of suprathermal ions affects the critical wavenumber for instability but does not determine its emergence. Moreover, the wave frequency, growth rate, and critical wavenumber are numerically solved from the dispersion relation. The results suggest that the critical wavenumber cannot be neglected with the typical parameters of space plasmas. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Comments: 22 pages, 4 figures. Accepted by Physics of Plasmas

Journal ref: Phys. Plasmas 30, 122113 (2023)

Superconductivity in the high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx with possible nontrivial band topology

Authors: Lingyong Zeng, Xunwu Hu, Yazhou Zhou, Mebrouka Boubeche, Ruixin Guo, Yang Liu, Si-Chun Luo, Shu Guo, Kuan Li, Peifeng Yu, Chao Zhang, Wei-Ming Guo, Liling Sun, Dao-Xin Yao, Huixia Luo

Abstract: Topological superconductors have drawn significant interest from the scientific community due to the accompanying Majorana fermions. Here, we report the discovery of electronic structure and superconductivity in high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx (x = 1 and 0.8) combined with experiments and first-principles calculations. The Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx high-entropy ceramics show bu… ▽ More Topological superconductors have drawn significant interest from the scientific community due to the accompanying Majorana fermions. Here, we report the discovery of electronic structure and superconductivity in high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx (x = 1 and 0.8) combined with experiments and first-principles calculations. The Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx high-entropy ceramics show bulk type-II superconductivity with Tc about 4.00 K (x = 1) and 2.65 K (x = 0.8), respectively. The specific heat jump is equal to 1.45 (x = 1) and 1.52 (x = 0.8), close to the expected value of 1.43 for the BCS superconductor in the weak coupling limit. The high-pressure resistance measurements show that a robust superconductivity against high physical pressure in Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2C, with a slight Tc variation of 0.3 K within 82.5 GPa. Furthermore, the first-principles calculations indicate that the Dirac-like point exists in the electronic band structures of Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2C, which is potentially a topological superconductor. The Dirac-like point is mainly contributed by the d orbitals of transition metals M and the p orbitals of C. The high-entropy ceramics provide an excellent platform for the fabrication of novel quantum devices, and our study may spark significant future physics investigations in this intriguing material. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Comments: 28 pages, 7 figures,The manuscript with the same title will be published by Advanced Science

Wave-like Tunneling of Phonons Dominates Glass-like Thermal Transport in Quasi-1D Copper Halide CsCu2I3

Authors: Jiongzhi Zheng, Changpeng Lin, Chongjia Lin, Baoling Huang, Ruiqiang Guo, Geoffroy Hautier

Abstract: Fundamental understanding of thermal transport in compounds with ultra-low thermal conductivity remains challenging, primarily due to the limitations of conventional lattice dynamics and heat transport models. In this study, we investigate the thermal transport in quasi-one-dimensional (1D) copper halide CsCu2I3 by employing a combination of first principles-based self-consistent phonon calculatio… ▽ More Fundamental understanding of thermal transport in compounds with ultra-low thermal conductivity remains challenging, primarily due to the limitations of conventional lattice dynamics and heat transport models. In this study, we investigate the thermal transport in quasi-one-dimensional (1D) copper halide CsCu2I3 by employing a combination of first principles-based self-consistent phonon calculations and a dual-channel thermal transport model. Our results show that the 0-K unstable soft modes, primarily dominated by Cs and I atoms in CsCu2I3, can be an-harmonically stabilized at ~ 75 K. Furthermore, we predict an ultra-low thermal conductivity of 0.362 Wm^(-1) K^(-1) along the chain axis and 0.201 Wm^(-1) K^(-1) along cross chain direction in CsCu2I3 at 300 K. Importantly, we find that an unexpected anomalous trend of increasing cross-chain thermal conductivity with increasing temperature for CsCu2I3, following a temperature dependence of ~T 0.106, which is atypical for a single crystal and classified as an abnormal glass-like behavior. The peculiar temperature-dependent behavior of thermal conductivity is elucidated by the dominant wave-like tunnelling of phonons in thermal transport of CsCu2I3 along cross-chain direction. In contrast, particle-like phonon propagation primarily contributes to the chain-axis thermal conductivity across the entire temperature range of 300-700 K. The sharp difference in the dominant thermal transport channels between the two crystallographic directions can be attributed to the unique chain-like quasi-1D structure of CsCu2I3. Our study not only illustrates the microscopic mechanisms of thermal transport in CsCu2I3 but also paves the way for searching for and designing materials with ultra-low thermal conductivity. △ Less

Submitted 9 November, 2023; v1 submitted 20 October, 2023; originally announced October 2023.

Turning non-magnetic two-dimensional molybdenum disulfide into room temperature magnets by the synergistic effect of strain engineering and charge injection

Authors: Jing Wu, Ruyi Guo, Daoxiong Wu, Xiuling Li, Xiaojun Wu

Abstract: The development of two-dimensional (2D) room temperature magnets is of great significance to the practical application of spintronic devices. However, the number of synthesized intrinsic 2D magnets is limited and the performances of them are not satisfactory, e.g. typically with low Curie temperature and poor environmental stability. Magnetic modulation based on developed 2D materials, especially… ▽ More The development of two-dimensional (2D) room temperature magnets is of great significance to the practical application of spintronic devices. However, the number of synthesized intrinsic 2D magnets is limited and the performances of them are not satisfactory, e.g. typically with low Curie temperature and poor environmental stability. Magnetic modulation based on developed 2D materials, especially non-magnetic 2D materials, can bring us new breakthroughs. Herein, we report room temperature ferromagnetism in halogenated MoS2 monolayer under the synergistic effect of strain engineering and charge injection, and the combined implementation of these two processes is based on the halogenation of MoS2. The adsorbed halogen atoms X (X = F, Cl, and Br) on the surface leads to lattice superstretching and hole injection, resulting in MoS2 monolayer exhibiting half-metallic properties, with one spin channel being gapless in the band structure. The Curie temperature of halogenated MoS2 monolayer is 513~615 K, which is much higher than the room temperature. In addition, large magnetic anisotropy energy and good environmental stability make halogenated MoS2 display great advantages in practical spintronic nanodevices. △ Less

Submitted 22 October, 2023; v1 submitted 5 October, 2023; originally announced October 2023.

Superconductivity in the cobalt-doped V3Si A15 intermetallic compound

Authors: Lingyong Zeng, Huawei Zhou, Hong Du, Ruidan Zhong, Ruixin Guo, Shu Guo, Wanzhen Su, Kuan Li, Chao Zhang, Peifeng Yu, Huixia Luo

Abstract: The A15 structure of superconductors is a prototypical type-II superconductor that has generated considerable interest since the early history of superconducting materials. This paper discusses the superconducting properties of previously unreported V3-xCoxSi alloys. It is found that the lattice parameter decreases with increasing cobalt-doped content and leads to an increased residual resistivity… ▽ More The A15 structure of superconductors is a prototypical type-II superconductor that has generated considerable interest since the early history of superconducting materials. This paper discusses the superconducting properties of previously unreported V3-xCoxSi alloys. It is found that the lattice parameter decreases with increasing cobalt-doped content and leads to an increased residual resistivity ratio (RRR) value of the V3-xCoxSi system. Meanwhile, the superconducting transition temperature (Tc) cobalt-doped content. Furthermore, the fitted data show that the increase of cobalt-doped content also reduces the lower/upper critical fields of the V3-xCoxSi system. Type-II superconductivity is demonstrated on all V3-xCoxSi samples. With higher Co-doped content, V3-xCoxSi alloys may have superconducting and structural phase transitions at low-temperature regions. As the electron/atom (e/a) ratio increases, the Tc variation trend of V3Si is as pronounced as in crystalline alloys and monotonically follows the trend observed for amorphous superconductors. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Comments: 20 pages, 7 figures

Journal ref: Supercond. Sci. Technol.2023,36,035003

Magnetic phase transitions in the triangular-lattice spin-1 dimer compound K2Ni2(SeO3)3

Authors: Lei Yue, Ziyou Lu, Kun Yan, Le Wang, Shu Guo, Ruixin Guo, Peng Chen, Xiaobin Chen, Jia-Wei Mei

Abstract: In our study, we conduct magnetization and heat capacity measurements to investigate field induced magnetic phase transitions within the newly synthesized compound K2Ni2(SeO3)3, a spin-1 dimer system arranged on a triangular lattice. From our first-principles simulations, we determine that the spin system in K2Ni2(SeO3)3 can be represented as a two-dimensional triangular-lattice spin-1 dimer model… ▽ More In our study, we conduct magnetization and heat capacity measurements to investigate field induced magnetic phase transitions within the newly synthesized compound K2Ni2(SeO3)3, a spin-1 dimer system arranged on a triangular lattice. From our first-principles simulations, we determine that the spin system in K2Ni2(SeO3)3 can be represented as a two-dimensional triangular-lattice spin-1 dimer model, including an intra-dimer exchange of J1 = 0.32 meV, an inter-dimer exchange of J2 = 0.79 meV, and an easy-axis anisotropy of D = 0.14 meV. The presence of easy-axis magnetic anisotropy explains the distinct magnetic phase diagrams observed under c-axis directional and in-plane magnetic fields. Notably, our investigation unveils a two-step phase transition with the magnetic field aligned with the c direction. Our findings yield valuable insights into the magnetic phase transitions inherent to geometrically frustrated magnetic systems featuring dimer structures. △ Less

Submitted 29 May, 2024; v1 submitted 19 September, 2023; originally announced September 2023.

Comments: 11 pages, 11 figures

Superconductivity in the medium-entropy alloy TiVNbTa with a body-centered cubic structure

Authors: Kuan Li, Xunwu Hu, Ruixin Guo, Wenrui Jiang, Lingyong Zeng, Longfu Li, Peifeng Yu, Kangwang Wang, Chao Zhang, Shu Guo, Ruidan Zhong, Tao Xie, DaoXin Yao, Huixia Luo

Abstract: Here we report the TiVNbTa medium-entropy alloy (MEA) superconductor with the mixed 3d - 5d elements synthesized by an arc-melting method. The TiVNbTa material has a body-centered cubic structure. The superconducting properties of TiVNbTa were studied by resistivity, magnetic susceptibility, and specific heat measurements. The experimental results show that the bulk superconducting phase transitio… ▽ More Here we report the TiVNbTa medium-entropy alloy (MEA) superconductor with the mixed 3d - 5d elements synthesized by an arc-melting method. The TiVNbTa material has a body-centered cubic structure. The superconducting properties of TiVNbTa were studied by resistivity, magnetic susceptibility, and specific heat measurements. The experimental results show that the bulk superconducting phase transition temperature of TiVNbTa is about 4.65 K, and the upper and lower critical fields are 49.3(4) mT and 5.9(5) T, respectively, which indicates TiVNbTa is a type-II superconductor. First-principles calculations show that the d electrons of Ti, V, Nb, and Ta atoms play a significant role near the Fermi level. The results show TiVNbTa is a traditional s-wave superconductor. △ Less

Submitted 30 August, 2023; originally announced August 2023.

Comments: 20 pages, 7 figures

Journal ref: J.Phys.Chem.C 2023,127,16211-16218

Discovery of the high-entropy carbide ceramic topological superconductor candidate (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C

Authors: Lingyong Zeng, Zequan Wang, Jing Song, Gaoting Lin, Ruixin Guo, Si-Chun Luo, Shu Guo, Kuan Li, Peifei Yu, Chao Zhang, Wei-Ming Guo, Jie Ma, Yusheng Hou, Huixia Luo

Abstract: High-entropy ceramics (HECs) are solid solutions of inorganic compounds with one or more Wyckoff sites shared by equal or near-equal atomic ratios of multi-principal elements. Material design and property tailoring possibilities emerge from this new class of materials. Here, we report the discovery of superconductivity around 2.35 K and topological properties in the (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C hi… ▽ More High-entropy ceramics (HECs) are solid solutions of inorganic compounds with one or more Wyckoff sites shared by equal or near-equal atomic ratios of multi-principal elements. Material design and property tailoring possibilities emerge from this new class of materials. Here, we report the discovery of superconductivity around 2.35 K and topological properties in the (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C high-entropy carbide ceramic (HECC), which has not been observed before in any of the investigated HECC. Density functional theory calculations showed that six type-II Dirac points exist in (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C, which mainly contributed from the t2g orbitals of transition metals and the p orbitals of C. Due to the stability of the structure, we also observed robust superconductivity under pressure in this HEC superconductor. This study expands the physical properties of HECs, which may become a new material platform for superconductivity research, especially for studying the coupling between superconductivity and topological physics. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Comments: 30 pages, 5 figures

Journal ref: Adv. Funct. Mater. 2023, 2301929

Hall anomaly by vacancies vs fragments of vortex lattice: Quantitative analyses of new evidences

Authors: Ruonan Guo, Yong-Cong Chen, Da Jiang, Ping Ao

Abstract: Despite numerous recent studies on the Hall anomaly following the discovery of cuprate superconductivity, the origin of this phenomenon remains contentious. We demonstrate that a previously proposed mechanism, in which vacancy-on-fragment of the flux-line crystal, provides an alternative explanation for the observations of $\rm{Bi_{2}Sr_{2}CaCu_{2}O_{x}}$ thin films made by Nitzav and Kanigel [Phy… ▽ More Despite numerous recent studies on the Hall anomaly following the discovery of cuprate superconductivity, the origin of this phenomenon remains contentious. We demonstrate that a previously proposed mechanism, in which vacancy-on-fragment of the flux-line crystal, provides an alternative explanation for the observations of $\rm{Bi_{2}Sr_{2}CaCu_{2}O_{x}}$ thin films made by Nitzav and Kanigel [Phys. Rev. B. 107, 094516 (2023)], without the need for adjustable parameters. Specifically, we show that the power-law behavior of $ρ_{xy}$ over $ρ_{xx}$, with and without sign reversal, is consistent with the picture of vacancies versus fragments. Interestingly, we find that the effective length of vortex lines is consistently 1.5 unit cells (UC) across different experiments, independent of film thickness. △ Less

Submitted 27 November, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2206.03384

The nonequilibrium evolution near the phase boundary

Authors: Xiaobing Li, Yuming Zhong, Ranran Guo, Mingmei Xu, Yu Zhou, Jinghua Fu, Yuanfang Wu

Abstract: Using the single-spin flipping dynamics, we study the nonequilibrium evolution near the entire phase boundary of the 3D Ising model, and find that the average of relaxation time (RT) near the first-order phase transition line (1st-PTL) is significantly larger than that near the critical point (CP). As the system size increases, the average of RT near the 1st-PTL increases at a higher power compare… ▽ More Using the single-spin flipping dynamics, we study the nonequilibrium evolution near the entire phase boundary of the 3D Ising model, and find that the average of relaxation time (RT) near the first-order phase transition line (1st-PTL) is significantly larger than that near the critical point (CP). As the system size increases, the average of RT near the 1st-PTL increases at a higher power compared to that near the CP. We further show that RT near the 1st-PTL is not only non-self-averaging, but actually self-diverging: relative variance of RT increases with system size. The presence of coexisting and metastable states results in a substantial increase in randomness near the 1st-PTL, and therefore makes the equilibrium more difficult to achieve. △ Less

Submitted 11 March, 2024; v1 submitted 29 May, 2023; originally announced May 2023.

Comments: 6 pages, 3 figures

Electron-phonon coupling and non-equilibrium thermal conduction in ultrafast heating systems

Authors: Chuang Zhang, Rulei Guo, Meng Lian, Junichiro Shiomi

Abstract: The electron-phonon coupling in ultrafast heating systems is studied within the framework of Boltzmann transport equation (BTE) with coupled electron and phonon transport. A discrete unified gas kinetic scheme is developed to solve the BTE, in which the electron/phonon advection, scattering and electron-phonon interactions are coupled together within one time step by solving the BTE again at the c… ▽ More The electron-phonon coupling in ultrafast heating systems is studied within the framework of Boltzmann transport equation (BTE) with coupled electron and phonon transport. A discrete unified gas kinetic scheme is developed to solve the BTE, in which the electron/phonon advection, scattering and electron-phonon interactions are coupled together within one time step by solving the BTE again at the cell interface. Numerical results show that the present scheme can correctly predict the electron-phonon coupling constant, and is in excellent agreement with typical two-temperature model (TTM) and experimental results in existing literatures and our performed time-domain thermoreflectance technique. It can also capture the ballistic or thermal wave effects when the characteristic length/time is comparable to or smaller than the mean free path/relaxation time where the TTM fails. Finally, the electron-phonon coupling in transient thermal grating geometry and Au/Pt bilayer metals with interfacial thermal resistance is simulated and discussed. For the former, heat flow from phonon to electron is predicted in both the ballistic and diffusive regimes. For the latter, the reflected signal increases in the early tens of picoseconds and then decreases with time after the heat source is removed. △ Less

Submitted 24 August, 2023; v1 submitted 11 May, 2023; originally announced May 2023.

Comments: 16 pages, 12 figures

MSC Class: 82D37; 80A05 80A19

Electron doping induced stable ferromagnetism in two-dimensional GdI_3 monolayer

Authors: Rong Guo, Yilv Guo, Yehui Zhang, Xiaoshu Gong, Tingbo Zhang, Xing Yu, Shijun Yuan, Jinlan Wang

Abstract: As a two-dimensional material with a hollow hexatomic ring structure, Néel-type anti-ferromagnetic (AFM) GdI3 can be used as a theoretical model to study the effect of electron doping. Based on first-principles calculations, we find that the Fermi surface nesting occurs when more than 1/3 electron per Gd is doped, resulting in the failure to obtain a stable ferromagnetic (FM) state. More interesti… ▽ More As a two-dimensional material with a hollow hexatomic ring structure, Néel-type anti-ferromagnetic (AFM) GdI3 can be used as a theoretical model to study the effect of electron doping. Based on first-principles calculations, we find that the Fermi surface nesting occurs when more than 1/3 electron per Gd is doped, resulting in the failure to obtain a stable ferromagnetic (FM) state. More interestingly, GdI3 with appropriate Mg/Ca doping (1/6 Mg/Ca per Gd) turns to be half-metallic FM state. This AFM-FM transition results from the transfer of doped electrons to the spatially expanded Gd-5d orbital, which leads to the FM coupling of local half-full Gd-4f electrons through 5d-4f hybridization. Moreover, the shortened Gd-Gd length is the key to the formation of the stable ferromagnetic coupling. Our method provides new insights into obtaining stable FM materials from AFM materials. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 16 pages, 6 figures

Direct Linearly-Polarised Electroluminescence from Perovskite Nanoplatelet Superlattices

Authors: Junzhi Ye, Aobo Ren, Linjie Dai, Tomi Baikie, Renjun Guo, Debapriya Pal, Sebastian Gorgon, Julian E. Heger, Junyang Huang, Yuqi Sun, Rakesh Arul, Gianluca Grimaldi, Kaiwen Zhang, Javad Shamsi, Yi-Teng Huang, Hao Wang, Jiang Wu, A. Femius Koenderink, Laura Torrente Murciano, Matthias Schwartzkopf, Stephen V. Roth, Peter Muller-Buschbaum, Jeremy J. Baumberg, Samuel D. Stranks, Neil C. Greenham , et al. (4 additional authors not shown)

Abstract: Polarised light is critical for a wide range of applications, but is usually generated by filtering unpolarised light, which leads to significant energy losses and requires additional optics. Herein, the direct emission of linearly-polarised light is achieved from light-emitting diodes (LEDs) made of CsPbI3 perovskite nanoplatelet superlattices. Through use of solvents with different vapour pressu… ▽ More Polarised light is critical for a wide range of applications, but is usually generated by filtering unpolarised light, which leads to significant energy losses and requires additional optics. Herein, the direct emission of linearly-polarised light is achieved from light-emitting diodes (LEDs) made of CsPbI3 perovskite nanoplatelet superlattices. Through use of solvents with different vapour pressures, the self-assembly of perovskite nanoplatelets is achieved to enable fine control over the orientation (either face-up or edge-up) and therefore the transition dipole moment. As a result of the highly-uniform alignment of the nanoplatelets, as well as their strong quantum and dielectric confinement, large exciton fine-structure splitting is achieved at the film level, leading to pure-red LEDs exhibiting a high degree of linear polarisation of 74.4% without any photonic structures. This work unveils the possibilities of perovskite nanoplatelets as a highly promising source of linearly-polarised electroluminescence, opening up the development of next-generation 3D displays and optical communications from this highly versatile, solution-processable system. △ Less

Submitted 8 February, 2023; v1 submitted 7 February, 2023; originally announced February 2023.

Comments: 26 pages, 5 figures

Unravelling Ultralow Thermal Conductivity in Double Perovskite Cs2AgBiBr6: Dominant Wave-like Phonon Tunnelling, Strong Quartic Anharmonicity and Lattice Instability

Authors: Jiongzhi Zheng, Changpeng Lin, Chongjia Lin, Geoffroy Hautier, Ruiqiang Guo, Baoling Huang

Abstract: In this work, we investigate the microscopic mechanisms of anharmonic lattice dynamics and thermal transport in lead-free halide double perovskite Cs2AgBiBr6 from first principles. We combine self-consistent phonon calculations with bubble diagram correction and a unified theory of lattice thermal transport that considers both the particle-like phonon propagation and wave-like tunnelling of phonon… ▽ More In this work, we investigate the microscopic mechanisms of anharmonic lattice dynamics and thermal transport in lead-free halide double perovskite Cs2AgBiBr6 from first principles. We combine self-consistent phonon calculations with bubble diagram correction and a unified theory of lattice thermal transport that considers both the particle-like phonon propagation and wave-like tunnelling of phonons. An ultra-low thermal conductivity at room temperature (~0.21 Wm-1K-1) is predicted with weak temperature dependence(~T-0.45), in sharp contrast to the conventional ~T-1 dependence. Particularly, the vibrational properties of Cs2AgBiBr6 are featured by strong anharmonicity and wave-like tunnelling of phonons. Anharmonic phonon renormalization from both the cubic and quartic anharmonicities are found essential in precisely predicting the phase transition temperature in Cs2AgBiBr6 while the negative phonon energy shifts induced by cubic anharmonicity has a significant influence on particle-like phonon propagation. Further, the contribution of the wave-like tunnelling to the total thermal conductivity surpasses that of the particle-like propagation above around 340 K, indicating the breakdown of the phonon gas picture conventionally used in the Peierls-Boltzmann Transport Equation. Importantly, further including four-phonon scatterings is required in achieving the dominance of wave-like tunnelling, as compared to the dominant particle-like propagation channel when considering only three-phonon scatterings. Our work highlights the importance of lattice anharmonicity and wave-like tunnelling of phonons in the thermal transport in lead-free halide double perovskites. △ Less

Submitted 12 December, 2023; v1 submitted 28 January, 2023; originally announced January 2023.

The unexpected magnetism in 2D group-IV-doped GaN for spintronic applications

Authors: Rui Zhao, Rui Guo, Yanfeng Ge, Yong Liu, Wenhui Wan

Abstract: In this study, the structural and magnetic properties of group-IV-doped monolayer GaN were systematically investigated by first-principles calculations. Among all the group-IV dopants, only Ge and Sn atoms prefer to substitute the Ga atom of monolayer GaN and form a buckling structure with a magnetic moment of 1 $μ_B$ per dopant. The N-rich growth conditions are more desirable for such a substitut… ▽ More In this study, the structural and magnetic properties of group-IV-doped monolayer GaN were systematically investigated by first-principles calculations. Among all the group-IV dopants, only Ge and Sn atoms prefer to substitute the Ga atom of monolayer GaN and form a buckling structure with a magnetic moment of 1 $μ_B$ per dopant. The N-rich growth conditions are more desirable for such a substitution process than the Ga-rich grow conditions. With a large diffusion barrier vertical to the monolayer GaN, both Ge and Sn atoms tend to stay on the same side of monolayer GaN with an antiferromagnetic coupling between them. When intrinsic vacancies exist in monolayer GaN, the magnetic moments of group-IV dopants vanish due to the charge transferring from the dopants to Ga or N vacancies. The precondition creation of Ga vacancies, a plentiful supply of Ge or Sn dopants, and the N-rich conditions can be adopted to maintain the magnetic properties of group-IV-doped monolayer GaN. These theoretical results help to promote the applications of 2D GaN-based materials in spintronics. △ Less

Submitted 5 April, 2023; v1 submitted 18 January, 2023; originally announced January 2023.

Machine Learning Interatomic Potential for Anisotropic Thermal Transport in Bulk Hexagonal Boron Nitride

Authors: Jialin Tang, Qi Wang, Jiongzhi Zheng, Lin Cheng, Ruiqiang Guo

Abstract: The highly anisotropic thermal conductivity in layered materials is crucial for a broad range of applications such as thermal management of electronic devices, thermal insulation, and thermoelectrics. Understanding of anisotropic thermal transport in layered materials largely depends on atomistic simulations based on density functional theory (DFT) or empirical potentials, which however suffer eit… ▽ More The highly anisotropic thermal conductivity in layered materials is crucial for a broad range of applications such as thermal management of electronic devices, thermal insulation, and thermoelectrics. Understanding of anisotropic thermal transport in layered materials largely depends on atomistic simulations based on density functional theory (DFT) or empirical potentials, which however suffer either low computational efficiency or accuracy. Recently, machine learning interatomic potentials (MLIPs) are emerging as a powerful tool to bridge the gap. Despite the recent progress in developing MLIPs, little attention has been paid to constructing a potential that can accurately predict the thermal properties of layered materials, which is more challenging compared with the case of isotropic materials because of the highly anisotropic bonding and weak van der Waals interactions in layered materials. Here, we introduce a MLIP within the Gaussian approximation potential (GAP) framework for bulk hexagonal boron nitride (h-BN) with a typical layered structure. The GAP can well predict the highly anisotropic phonon transport properties and thermal conductivity of bulk h-BN with DFT-level accuracy at orders of magnitude reduced cost. Our work demonstrates the ability of GAP to reproduce the subtle features of anisotropic potential energy surfaces of bulk h-BN and potentially other layered materials. Atomistic simulations based on MLIPs are expected to be able to greatly promote the understanding of phonon transport and the prediction of thermophysical properties in layered materials. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Comments: 31 pages, 8 figures, 62 references

2D-XY ferromagnetism with high transition temperature in Janus monolayer V$_{2}$XN (X = P, As)

Authors: Wenhui Wan, Botao Fu, Chang Liu, Rui Guo, Yanfeng Ge, Yong Liu

Abstract: Two-dimensional (2D) XY magnets with easy magnetization planes support the nontrivial topological spin textures whose dissipationless transport is highly desirable for 2D spintronic devices. Here, we predicted that Janus monolayer V$_{2}$XN (X = P, As) with a square lattice are 2D-XY ferromagnets by first-principles calculations. Both the magnetocrystalline anisotropy and magnetic shape anisotropy… ▽ More Two-dimensional (2D) XY magnets with easy magnetization planes support the nontrivial topological spin textures whose dissipationless transport is highly desirable for 2D spintronic devices. Here, we predicted that Janus monolayer V$_{2}$XN (X = P, As) with a square lattice are 2D-XY ferromagnets by first-principles calculations. Both the magnetocrystalline anisotropy and magnetic shape anisotropy favor an in-plane magnetization, leading to an easy magnetization $xy$-plane in Janus monolayer V$_{2}$XN. Resting on the Monte Carlo simulations, we observed the Berezinskii-Kosterlitz-Thouless (BKT) phase transition in monolayer V$_{2}$XN with transition temperature $T_{\rm BKT}$ being above the room temperature. Especially, monolayer V$_{2}$AsN has a magnetic anisotropy energy (MAE) of 292.0 $μ$eV per V atom and a $T_{\rm BKT}$ of 434 K, which is larger than that of monolayer V$_{2}$PN. Moreover, a tensile strain of 5\% can further improve the $T_{\rm BKT}$ of monolayer V$_{2}$XN to be above 500 K. Our results indicated that Janus monolayer V$_{2}$XN (X = P, As) were candidate materials to realize high-temperature 2D-XY ferromagnetism for spintronics applications. △ Less

Submitted 22 February, 2023; v1 submitted 13 August, 2022; originally announced August 2022.

Comments: 18 pages, 7 figures

Hall anomaly by vacancies in pinned lattice of vortices: A quantitative analysis on the thin-film data of BSCCO

Authors: Ruonan Guo, Yong-Cong Chen, Ping Ao

Abstract: Hall anomaly, as appears in the mixed-state Hall resistivity of type-II superconductors, has had numerous theories but yet a consensus on its origin. In this work, we conducted a quantitative analysis of the magnetotransport measurements on BSCCO thin films by Zhao et al. [Phys. Rev. Lett. 122, 247001 (2019)] and validate a previously proposed vacancy mechanism [cf. J. Phys. Condens. Matter. 10, L… ▽ More Hall anomaly, as appears in the mixed-state Hall resistivity of type-II superconductors, has had numerous theories but yet a consensus on its origin. In this work, we conducted a quantitative analysis of the magnetotransport measurements on BSCCO thin films by Zhao et al. [Phys. Rev. Lett. 122, 247001 (2019)] and validate a previously proposed vacancy mechanism [cf. J. Phys. Condens. Matter. 10, L677 (1998)] with many-body vortex correlations for the phenomenon. The model attributes the Hall anomaly to the motion of vacancies in pinned fragments of vortex lattice. Its validity is first examined by an exploration on the vortex states near the Kosterlitz-Thouless transition on the vortex crystal. Comparisons are then carried out between the measured activation energies with the calculated creation energy of the vortex-anti-vortex pair and the vacancy energy on the flux-line lattice, with no adjustable parameter. Our analysis elucidates the theoretical basis and prerequisites of the vacancy model. In particular, the vacancy activation energies are an order of magnitude smaller than that of a sole vortex line. The proposed mechanism may provide a macro-theoretical framework for other studies. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Soft magnetic microrobot doped with porous silica for stability-enhanced multimodal locomotion in nonideal environment

Authors: Shangsong Li, Dong Liu, Yuping Hu, Zhijie Su, Xinai Zhang, Ruirui Guo, Dan Li, Yuan Lu

Abstract: As an emerging field of robotics, magnetic-field-controlled soft microrobot has broad application prospects for its flexibility, locomotion diversity as well as remote controllability. Magnetic soft microrobots can perform multimodal locomotion under the control of a magnetic field, which may have potential applications in precision medicine. However, previous researches mainly focus on new locomo… ▽ More As an emerging field of robotics, magnetic-field-controlled soft microrobot has broad application prospects for its flexibility, locomotion diversity as well as remote controllability. Magnetic soft microrobots can perform multimodal locomotion under the control of a magnetic field, which may have potential applications in precision medicine. However, previous researches mainly focus on new locomotion in a relatively ideal environment, lacking exploration on the ability of magnetic microrobot locomotion to resist external disturbances and proceed in a nonideal environment. Here, a porous silica-doped soft magnetic microrobot is constructed for enhanced stability of multimodal locomotion in the nonideal biological environment. Porous silica spheres are doped into NdFeB-silicone elastomer base, improving adhesion properties as well as refining the comprehensive mechanical properties of the microrobot. Multimodal locomotions are achieved, and the influence of porous silica doping on the stability of each locomotion in nonideal environment is explored in depth. Motions in nonideal circumstances such as climbing, loading, current rushing, wind blowing, and obstacle hindering are conducted successfully with porous silica doping. Such a stability-enhanced multimodal locomotion system can be used in biocatalysis as well as thrombus removal, and its prospect for precision medicine is highlighted by in vivo demonstration of multimodal locomotion with nonideal disturbance. △ Less

Submitted 14 November, 2021; originally announced November 2021.

Comments: 55 pages and 11 figures for the main body, 43 pages and 11 figures for the supplementary information

Phase-transition-induced giant Thomson effect for thermoelectric cooling

Authors: Rajkumar Modak, Masayuki Murata, Dazhi Hou, Asuka Miura, Ryo Iguchi, Bin Xu, Rulei Guo, Junichiro Shiomi, Yuya Sakuraba, Ken-ichi Uchida

Abstract: The Seebeck and Peltier effects have been widely studied and used in various thermoelectric technologies, including thermal energy harvesting and solid-state heat pumps. However, basic and applied studies on the Thomson effect, another fundamental thermoelectric effect in conductors, are limited despite the fact that the Thomson effect allows electronic cooling through the application of a tempera… ▽ More The Seebeck and Peltier effects have been widely studied and used in various thermoelectric technologies, including thermal energy harvesting and solid-state heat pumps. However, basic and applied studies on the Thomson effect, another fundamental thermoelectric effect in conductors, are limited despite the fact that the Thomson effect allows electronic cooling through the application of a temperature gradient bias rather than the construction of junction structures. In this article, we report the observation of a giant Thomson effect that appears owing to magnetic phase transitions. The Thomson coefficient of FeRh-based alloys reaches large values approaching $-$1,000 $μ$VK$^{-1}$ around room temperature because of the steep temperature dependence of the Seebeck coefficient associated with the antiferromagnetic-ferromagnetic phase transition. The Thomson coefficient is several orders of magnitude larger than the Seebeck coefficient of the alloys. Using the active thermography technique, we demonstrate that the Thomson cooling can be much larger than Joule heating in the same material even in a nearly steady state. The operation temperature of the giant Thomson effect in the FeRh-based alloys can be tuned over a wide range by applying an external magnetic field or by slightly changing the composition. Our findings provide a new direction in the materials science of thermoelectrics and pave the way for thermal management applications using the Thomson effect. △ Less

Submitted 1 February, 2022; v1 submitted 4 November, 2021; originally announced November 2021.

Comments: 14 pages, 6 figures, 1 table. In Fig. 3, 4, and 5, the definition of the spatial coordinates is changed for easy comparison with previous studies and the arrows showing the charge current directions are reversed to correct a mistake. This revision does not change the conclusion and discussion of the present work and the figures in this version are the same as those in the published version

Journal ref: Applied Physics Reviews, Volume 9, Issue 1, 011414 (2022)

Enhancement of Anomalous Boundary Current by High Temperature

Authors: Ruiping Guo, Rong-Xin Miao

Abstract: Recently it is found that Weyl anomaly leads to novel anomalous currents in the spacetime with a boundary. However, the anomalous current is suppressed by the mass of charge carriers and the distance to the boundary, which makes it difficult to be measured. In this paper, we explore the possible mechanisms for the enhancement of anomalous currents. Interestingly, we find that the anomalous current… ▽ More Recently it is found that Weyl anomaly leads to novel anomalous currents in the spacetime with a boundary. However, the anomalous current is suppressed by the mass of charge carriers and the distance to the boundary, which makes it difficult to be measured. In this paper, we explore the possible mechanisms for the enhancement of anomalous currents. Interestingly, we find that the anomalous current can be significantly enhanced by the high temperature, which makes easier the experimental detection. For free theories, the anomalous current is proportional to the temperature in the high temperature limit. Note that the currents can be enhanced by thermal effects only at high temperatures. In general, this is not the case at low temperatures. For general temperatures, the absolute value of the current of Neumann boundary condition first decreases and then increases with the temperature, while the current of Dirichlet boundary condition always increases with the temperature. It should be mentioned that the enhancement does not have an anomalous nature. In fact, the so-called anomalous current in this paper is not always related to Weyl anomaly. Instead, it is an anomalous effect due to the boundary. △ Less

Submitted 11 August, 2021; v1 submitted 1 February, 2021; originally announced February 2021.

Comments: 16 pages, 6 figures,references added, minor revision accepted for publication in EPJC

Scalable monolayer-functionalized nanointerface for thermal conductivity enhancement in copper/diamond composite

Authors: Bin Xu, Shih-Wei Hung, Shiqian Hu, Cheng Shao, Rulei Guo, Junho Choi, Takashi Kodama, Fu-Rong Chen, Junichiro Shiomi

Abstract: Aiming at developing high thermal conductivity copper/diamond composite, an unconventional approach applying self-assembled monolayer (SAM) prior to the high-temperature sintering of copper/diamond composite was utilized to enhance the thermal boundary conductance (TBC) between copper and diamond. The enhancement was first systematically confirmed on a model interface system by detailed SAM morpho… ▽ More Aiming at developing high thermal conductivity copper/diamond composite, an unconventional approach applying self-assembled monolayer (SAM) prior to the high-temperature sintering of copper/diamond composite was utilized to enhance the thermal boundary conductance (TBC) between copper and diamond. The enhancement was first systematically confirmed on a model interface system by detailed SAM morphology characterization and TBC measurements. TBC significantly depends on the SAM coverage and ordering, and the formation of high-quality SAM promoted the TBC to 73 MW/m^2-K from 27 MW/m^2-K, the value without SAM. With the help of molecular dynamics simulations, the TBC enhancement was identified to be determined by the number of SAM bridges and the overlap of vibrational density of states. The diamond particles of 210 {\micro\metre} in size were simultaneously functionalized by SAM with the condition giving the highest TBC in the model system and sintered together with the copper to fabricate isotropic copper/diamond composite of 50% volume fraction. The measured thermal conductivity marked 711 W/m-K at room temperature, the highest value among the ones with similar diamond-particles volume fraction and size. This work demonstrates a novel strategy to enhance the thermal conductivity of composite materials by SAM functionalization. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Stationary states of polytropic plasmas

Authors: Ran Guo

Abstract: In this paper, we prove that the kappa distribution is the stationary solution of the Vlasov-Poisson system in an inhomogeneous plasma under the polytropic equation of state and an assumption restricting the local velocity distribution to a specific mathematical form. The profiles of density, temperature, and electric potential are obtained theoretically. The kappa index can be determined if the i… ▽ More In this paper, we prove that the kappa distribution is the stationary solution of the Vlasov-Poisson system in an inhomogeneous plasma under the polytropic equation of state and an assumption restricting the local velocity distribution to a specific mathematical form. The profiles of density, temperature, and electric potential are obtained theoretically. The kappa index can be determined if the initial state is known. In order to verify the theory, particle-in-cell simulations are made and the results show excellent agreement with the theoretical predictions for density, temperature, and velocity distributions of electrons. It is shown that the electron velocity distribution of spatially inhomogeneous plasma evolves from an initial Maxwellian to the final kappa distribution. It is also found that the value of kappa index in the final stationary state depends on the initial state of plasma. △ Less

Submitted 10 November, 2020; originally announced November 2020.

Journal ref: Phys. Plasmas 27, 122104 (2020)

An improved method to derive the kappa distribution in polytropic plasmas

Authors: Ran Guo

Abstract: This paper studies sufficient conditions for deriving the kappa distribution in polytropic plasmas by an improved method compared with the previous work [R. Guo, Phys. Plasmas \textbf{27}, 122104 (2020)]. We find that the polytropic equation of state can lead to the kappa distribution without any other assumptions in one dimension. In higher dimensions, an extra assumption that the global distribu… ▽ More This paper studies sufficient conditions for deriving the kappa distribution in polytropic plasmas by an improved method compared with the previous work [R. Guo, Phys. Plasmas \textbf{27}, 122104 (2020)]. We find that the polytropic equation of state can lead to the kappa distribution without any other assumptions in one dimension. In higher dimensions, an extra assumption that the global distribution must only depend on the energy is still needed. In addition, the self-consistence of the electrostatic potential is investigated in such plasmas. The study implies that in single-component plasmas, the potential is constrained by the Lane-Emden equation. However, in two-component plasmas, any arbitrary potential could exist with a suitable background ion density. Finally, we discuss the connections between the kappa distribution and the polytrope. △ Less

Submitted 30 March, 2021; v1 submitted 10 November, 2020; originally announced November 2020.

Journal ref: Phys. Plasmas 28, 044502 (2021)

Artificial two-dimensional polar metal by charge transfer to a ferroelectric insulator

Authors: W. X. Zhou, H. J. Wu, J. Zhou, S. W. Zeng, C. J. Li, M. S. Li, R. Guo, J. X. Xiao, Z. Huang, W. M. Lv, K. Han, P. Yang, C. G. Li, Z. S. Lim, H. Wang, Y. Zhang, S. J. Chua, K. Y. Zeng, T. Venkatesan, J. S. Chen, Y. P. Feng, S. J. Pennycook, A. Ariando

Abstract: Integrating multiple properties in a single system is crucial for the continuous developments in electronic devices. However, some physical properties are mutually exclusive in nature. Here, we report the coexistence of two seemingly mutually exclusive properties-polarity and two-dimensional conductivity-in ferroelectric Ba$_{0.2}$Sr$_{0.8}$TiO$_3$ thin films at the LaAlO$_3$/Ba$_{0.2}$Sr$_{0.8}$T… ▽ More Integrating multiple properties in a single system is crucial for the continuous developments in electronic devices. However, some physical properties are mutually exclusive in nature. Here, we report the coexistence of two seemingly mutually exclusive properties-polarity and two-dimensional conductivity-in ferroelectric Ba$_{0.2}$Sr$_{0.8}$TiO$_3$ thin films at the LaAlO$_3$/Ba$_{0.2}$Sr$_{0.8}$TiO$_3$ interface at room temperature. The polarity of a ~3.2 nm Ba$_{0.2}$Sr$_{0.8}$TiO$_3$ thin film is preserved with a two-dimensional mobile carrier density of ~0.05 electron per unit cell. We show that the electronic reconstruction resulting from the competition between the built-in electric field of LaAlO$_3$ and the polarization of Ba$_{0.2}$Sr$_{0.8}$TiO$_3$ is responsible for this unusual two-dimensional conducting polar phase. The general concept of exploiting mutually exclusive properties at oxide interfaces via electronic reconstruction may be applicable to other strongly-correlated oxide interfaces, thus opening windows to new functional nanoscale materials for applications in novel nanoelectronics. △ Less

Submitted 11 July, 2020; originally announced July 2020.

Comments: Main text: 25 pages, 4 figures Supplementary note: 19 pages, 11 figures

Journal ref: Commun. Phys. 2, 125 (2019)

Perpendicular magnetic anisotropy and Dzyaloshinskii-Moriya interaction at an oxide/ferromagnetic metal interface

Authors: Weinan Lin, Baishun Yang, Andy Paul Chen, Xiaohan Wu, Rui Guo, Shaohai Chen, Liang Liu, Qidong Xie, Xinyu Shu, Yajuan Hui, Gan Moog Chow, Yuanping Feng, Giovanni Carlotti, Silvia Tacchi, Hongxin Yang, Jingsheng Chen

Abstract: We report on the study of both perpendicular magnetic anisotropy (PMA) and Dzyaloshinskii-Moriya interaction (DMI) at an oxide/ferromagnetic metal (FM) interface, i.e. BaTiO3 (BTO)/CoFeB. Thanks to the functional properties of the BTO film and the capability to precisely control its growth, we are able to distinguish the dominant role of the oxide termination (TiO2 vs BaO), from the moderate effec… ▽ More We report on the study of both perpendicular magnetic anisotropy (PMA) and Dzyaloshinskii-Moriya interaction (DMI) at an oxide/ferromagnetic metal (FM) interface, i.e. BaTiO3 (BTO)/CoFeB. Thanks to the functional properties of the BTO film and the capability to precisely control its growth, we are able to distinguish the dominant role of the oxide termination (TiO2 vs BaO), from the moderate effect of ferroelectric polarization in the BTO film, on the PMA and DMI at the oxide/FM interface. We find that the interfacial magnetic anisotropy energy of the BaO-BTO/CoFeB structure is two times larger than that of the TiO2-BTO/CoFeB, while the DMI of the TiO2-BTO/CoFeB interface is larger. We explain the observed phenomena by first-principles calculations, which ascribe them to the different electronic states around the Fermi level at the oxide/ferromagnetic metal interfaces and the different spin-flip processes. This study paves the way for further investigation of the PMA and DMI at various oxide/FM structures and thus their applications in the promising field of energy-efficient devices. △ Less

Submitted 25 June, 2020; originally announced June 2020.

Comments: 14 pages, 4 figures, 1 table

Journal ref: Physical Review Letters 124, 217202 (2020)