-
Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures
Authors:
Hang-Xi Li,
Daryoush Shiri,
Sandoko Kosen,
Marcus Rommel,
Lert Chayanun,
Andreas Nylander,
Robert Rehammar,
Giovanna Tancredi,
Marco Caputo,
Kestutis Grigoras,
Leif Grönberg,
Joonas Govenius,
Jonas Bylander
Abstract:
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to p…
▽ More
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing.
△ Less
Submitted 30 August, 2023; v1 submitted 9 May, 2023;
originally announced May 2023.
-
Initial experimental results on a superconducting-qubit reset based on photon-assisted quasiparticle tunneling
Authors:
V. A. Sevriuk,
W. Liu,
J. Rönkkö,
H. Hsu,
F. Marxer,
T. F. Mörstedt,
M. Partanen,
J. Räbinä,
M. Venkatesh,
J. Hotari,
L. Grönberg,
J. Heinsoo,
T. Li,
J. Tuorila,
K. W. Chan,
J. Hassel,
K. Y. Tan,
M. Möttönen
Abstract:
We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispe…
▽ More
We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2--350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based of the Rabi oscillations, thus not distinguishing the residual thermal population of the qubit.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Qubit-compatible substrates with superconducting through-silicon vias
Authors:
K. Grigoras,
N. Yurttagül,
J. -P. Kaikkonen,
E. T. Mannila,
P. Eskelinen,
D. P. Lozano,
H. -X. Li,
M. Rommel,
D. Shiri,
N. Tiencken,
S. Simbierowicz,
A. Ronzani,
J. Hätinen,
D. Datta,
V. Vesterinen,
L. Grönberg,
J. Biznárová,
A. Fadavi Roudsari,
S. Kosen,
A. Osman,
M. Prunnila,
J. Hassel,
J. Bylander,
J. Govenius
Abstract:
We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the ar…
▽ More
We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration.
△ Less
Submitted 8 November, 2022; v1 submitted 25 January, 2022;
originally announced January 2022.
-
A superconductor free of quasiparticles for seconds
Authors:
E. T. Mannila,
P. Samuelsson,
S. Simbierowicz,
J. T. Peltonen,
V. Vesterinen,
L. Grönberg,
J. Hassel,
V. F. Maisi,
J. P. Pekola
Abstract:
Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order…
▽ More
Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order of one in state-of-the-art devices. However, the dynamics of the quasiparticle population as well as the time scales for adding and removing individual excitations remain largely unexplored. Here, we experimentally demonstrate a superconductor completely free of quasiparticles for periods lasting up to seconds. We monitor the quasiparticle number on a mesoscopic superconductor in real time by measuring the charge tunneling to a normal metal contact. Quiet, excitation-free periods are interrupted by random-in-time Cooper pair breaking events, followed by a burst of charge tunneling within a millisecond. Our results demonstrate the possibility of operating devices without quasiparticles with potentially improved performance. In addition, our experiment probes the origins of nonequilibrium quasiparticles in our device; the decay of the Cooper pair breaking rate over several weeks following the initial cooldown rules out processes arising from cosmic or long-lived radioactive sources.
△ Less
Submitted 5 July, 2022; v1 submitted 31 January, 2021;
originally announced February 2021.
-
Characterizing cryogenic amplifiers with a matched temperature-variable noise source
Authors:
Slawomir Simbierowicz,
Visa Vesterinen,
Joshua Milem,
Aleksi Lintunen,
Mika Oksanen,
Leif Roschier,
Leif Grönberg,
Juha Hassel,
David Gunnarsson,
Russell E. Lake
Abstract:
We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that in…
▽ More
We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that includes a traveling wave parametric amplifier and a commercial high electron mobility transistor amplifier. We observe system noise temperatures as low as $680^{+20}_{-200}$ mK at 5.7 GHz corresponding to $1.5^{+0.1}_{-0.7}$ excess photons. The system we present has immediate applications in the validation of solid-state qubit readout lines.
△ Less
Submitted 25 February, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Photon-number-dependent effective Lamb shift
Authors:
Arto Viitanen,
Matti Silveri,
Máté Jenei,
Vasilii Sevriuk,
Kuan Yen Tan,
Matti Partanen,
Jan Goetz,
Leif Grönberg,
Vasilii Vadimov,
Valtteri Lahtinen,
Mikko Möttönen
Abstract:
The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environmen…
▽ More
The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environment for a linear resonator mode and observe that the photon number in the environment can dramatically increase both the dissipation and the effective Lamb shift of the mode. Our observations are quantitatively described by a first-principles model which we develop here also to guide device design for future quantum-technological applications. The device demonstrated here can be utilized as a fully rf-operated quantum-circuit refrigerator to quickly reset superconducting qubits.
△ Less
Submitted 4 August, 2021; v1 submitted 19 August, 2020;
originally announced August 2020.
-
Fast control of dissipation in a superconducting resonator
Authors:
Vasilii Sevriuk,
Kuan Yen Tan,
Eric Hyyppä,
Matti Silveri,
Matti Partanen,
Máté Jenei,
Shumpei Masuda,
Jan Goetz,
Visa Vesterinen,
Leif Grönberg,
Mikko Möttönen
Abstract:
We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping…
▽ More
We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping rate by nearly four orders of magnitude. The control of the QCR is fully electrical, with the shortest implemented operation times in the range of 10 ns. This experiment constitutes a fast active reset of a superconducting quantum circuit. In the future, a similar scheme can potentially be used to initialize superconducting quantum bits.
△ Less
Submitted 27 June, 2019;
originally announced June 2019.
-
Calibration of cryogenic amplification chains using normal-metal--insulator--superconductor junctions
Authors:
Eric Hyyppä,
Máté Jenei,
Shumpei Masuda,
Kuan Yen Tan,
Matti Silveri,
Jan Goetz,
Matti Partanen,
Russel E. Lake,
Leif Grönberg,
Mikko Möttönen
Abstract:
Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tun…
▽ More
Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tunneling across voltage-biased NIS junctions. We derive an analytical equation that relates the generated power to the applied bias voltage which is the only control parameter of the device. After the setup has been characterized using a standard voltage reflection measurement, the total gain and the noise temperature are extracted by fitting the analytical equation to the microwave power measured at the output of the amplification chain. The 1$σ$ uncertainty of the total gain of 51.84 dB appears to be of the order of 0.1 dB.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Optimized heat transfer at exceptional points in quantum circuits
Authors:
Matti Partanen,
Jan Goetz,
Kuan Yen Tan,
Kassius Kohvakka,
Vasilii Sevriuk,
Russell E. Lake,
Roope Kokkoniemi,
Joni Ikonen,
Dibyendu Hazra,
Akseli Mäkinen,
Eric Hyyppä,
Leif Grönberg,
Visa Vesterinen,
Matti Silveri,
Mikko Möttönen
Abstract:
Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realiz…
▽ More
Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realize an EP in a superconducting microwave circuit consisting of two resonators. The EP is a singularity point of the Hamiltonian, and corresponds to the most efficient heat transfer between the resonators without oscillation of energy. We observe a crossover from underdamped to overdamped coupling via the EP by utilizing photon-assisted tunneling as an \emph{in situ} tunable dissipative element in one of the resonators. The methods studied here can be applied to different circuits to obtain fast dissipation, for example, for initializing qubits to their ground states. In addition, these results pave the way towards thorough investigation of parity--time ($\mathcal{PT}$) symmetric systems and the spontaneous symmetry breaking in superconducting microwave circuits operating at the level of single energy quanta.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Two SQUID amplifiers intended to alleviate the summing node inductance problem in multiplexed arrays of Transition Edge Sensors
Authors:
Mikko Kiviranta,
Leif Grönberg,
Jan van der Kuur
Abstract:
Frequency Domain Multiplexed detector arrays constructed of superconducting Transition Edge Sensors in the current-summing configuration suffer from the finite impedance of the summing node which should ideally be zero. We suggest two circuits to alleviate the effect. The first circuit uses a capacitive resonant transformer to increase the voltages and decrease the currents of TES signals to overc…
▽ More
Frequency Domain Multiplexed detector arrays constructed of superconducting Transition Edge Sensors in the current-summing configuration suffer from the finite impedance of the summing node which should ideally be zero. We suggest two circuits to alleviate the effect. The first circuit uses a capacitive resonant transformer to increase the voltages and decrease the currents of TES signals to overcome the parasitic inductance of the interconnections. On the SQUID chip impedance transform to the opposite direction takes place. The second circuit implements a power combiner having a better branch-to-branch isolation than a simple T-junction. Two SQUID devices have been designed and fabricated for a proof-of-principle demonstration of the circuits.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
Efficient thermionic operation and phonon isolation by a semiconductor-superconductor junction
Authors:
Emma Mykkänen,
Janne S. Lehtinen,
Leif Grönberg,
Andrey Shchepetov,
Andrey V. Timofeev,
David Gunnarsson,
Antti Kemppinen,
Antti J. Manninen,
Mika Prunnila
Abstract:
Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers an…
▽ More
Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers and thermal detectors for electromagnetic radiation, especially, rely on the maximization of electro-thermal response and blockade of phonon transport. In this work, we propose and demonstrate that efficient electro-thermal operation and phonon transfer blocking can be achieved in a single solid-state thermionic junction. Our experimental demonstration relies on suspended semiconductor-superconductor junctions where the electro-thermal response arises from the superconducting energy gap, and the phonon blocking naturally results from the transmission bottleneck at the junction. We suspend different size degenerately doped silicon chips (up to macroscopic scale) directly from the junctions and cool these by biasing the junctions. The electronic cooling operation characteristics are accompanied by measurement and analysis of the thermal resistance components in the structures indicating the operation principle of phonon blocking in the junctions.
△ Less
Submitted 9 September, 2018;
originally announced September 2018.
-
Observation of a broadband Lamb shift in an engineered quantum system
Authors:
Matti Silveri,
Shumpei Masuda,
Vasilii Sevriuk,
Kuan Y. Tan,
Máté Jenei,
Eric Hyyppä,
Fabian Hassler,
Matti Partanen,
Jan Goetz,
Russell E. Lake,
Leif Grönberg,
Mikko Möttönen
Abstract:
The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunabl…
▽ More
The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunable environment it is challenging to resolve the Lamb shift in its original broadband case. Consequently, the observations in other than atomic systems are limited to environments comprised of narrow-band modes. Here, we observe a broadband Lamb shift in high-quality superconducting resonators, a scenario also accessing static shifts inaccessible in Lamb's experiment. We measure a continuous change of several megahertz in the fundamental resonator frequency by externally tuning the coupling strength of the engineered broadband environment which is based on hybrid normal-metal--superconductor tunnel junctions. Our results may lead to improved control of dissipation in high-quality engineered quantum systems and open new possibilities for studying synthetic open quantum matter using this hybrid experimental platform.
△ Less
Submitted 1 February, 2019; v1 submitted 4 September, 2018;
originally announced September 2018.
-
Nanobolometer with Ultralow Noise Equivalent Power
Authors:
R. Kokkoniemi,
J. Govenius,
V. Vesterinen,
R. E. Lake,
A. M. Gunyho,
K. Y. Tan,
S. Simbierowicz,
L. Grönberg,
J. Lehtinen,
M. Prunnila,
J. Hassel,
O. -P. Saira,
M. Möttönen
Abstract:
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent pow…
▽ More
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent power, $20\textrm{ zW}/\sqrt{\textrm{Hz}}$, than previously reported for any bolometer. Importantly, it is more than an order of magnitude faster than other low-noise bolometers, with a time constant of 30 $μ$s at $60\textrm{ zW}/\sqrt{\textrm{Hz}}$. These results suggest a calorimetric energy resolution of $0.3\textrm{ zJ}=h\times 0.4$ THz with a time constant of 30 $μ$s. Thus the introduced nanobolometer is a promising candidate for future applications requiring extreme precision and speed such as those in astronomy and terahertz photon counting.
△ Less
Submitted 26 June, 2018; v1 submitted 25 June, 2018;
originally announced June 2018.
-
Flux-driven Josephson parametric amplifier for sub-GHz frequencies fabricated with side-wall passivated spacer junction technology
Authors:
Slawomir Simbierowicz,
Visa Vesterinen,
Leif Grönberg,
Janne Lehtinen,
Mika Prunnila,
Juha Hassel
Abstract:
We present experimental results on a Josephson parametric amplifier tailored for readout of ultra-sensitive thermal microwave detectors. In particular, we discuss the impact of fabrication details on the performance. We show that the small volume of deposited dielectric materials enabled by the side-wall passivated spacer niobium junction technology leads to robust operation across a wide range of…
▽ More
We present experimental results on a Josephson parametric amplifier tailored for readout of ultra-sensitive thermal microwave detectors. In particular, we discuss the impact of fabrication details on the performance. We show that the small volume of deposited dielectric materials enabled by the side-wall passivated spacer niobium junction technology leads to robust operation across a wide range of operating temperatures up to 1.5 K. The flux-pumped amplifier has gain in excess of 20 dB in three-wave mixing and its center frequency is tunable between 540 MHz and 640 MHz. At 600 MHz, the amplifier adds 105 mK $\pm$ 9 mK of noise, as determined with the hot/cold source method. Phase-sensitive amplification is demonstrated with the device.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
Flux-tunable heat sink for quantum electric circuits
Authors:
Matti Partanen,
Kuan Yen Tan,
Shumpei Masuda,
Joonas Govenius,
Russell E. Lake,
Máté Jenei,
Leif Grönberg,
Juha Hassel,
Slawomir Simbierowicz,
Visa Vesterinen,
Jani Tuorila,
Tapio Ala-Nissila,
Mikko Möttönen
Abstract:
Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our dev…
▽ More
Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above $10^5$ down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.
△ Less
Submitted 29 December, 2017;
originally announced December 2017.
-
Side-wall spacer passivated sub-um Josephson junction fabrication process
Authors:
Leif Grönberg,
Mikko Kiviranta,
Visa Vesterinen,
Janne Lehtinen,
Slawomir Simbierowicz,
Juho Luomahaara,
Mika Prunnila,
Juha Hassel
Abstract:
We present a structure and a fabrication method for superconducting tunnel junctions down to the dimensions of 200 nm using i-line UV lithography. The key element is a side-wall-passivating spacer structure (SWAPS) which is shaped for smooth crossline contacting and low parasitic capacitance. The SWAPS structure enables formation of junctions with dimensions at or below the lithography-limited lin…
▽ More
We present a structure and a fabrication method for superconducting tunnel junctions down to the dimensions of 200 nm using i-line UV lithography. The key element is a side-wall-passivating spacer structure (SWAPS) which is shaped for smooth crossline contacting and low parasitic capacitance. The SWAPS structure enables formation of junctions with dimensions at or below the lithography-limited linewidth. An additional benefit is avoiding the excessive use of amorphous dielectric materials which is favorable in sub-Kelvin microwave applications often plagued by nonlinear and lossy dielectrics. We apply the structure to niobium trilayer junctions, and provide characterization results yielding evidence on wafer-scale scalability, and critical current density tuning in the range of 0.1 -- 3.0 kA/cm$^2$. We discuss the applicability of the junction process in the context of different applications, such as, SQUID magnetometers and Josephson parametric amplifiers.
△ Less
Submitted 9 March, 2018; v1 submitted 20 June, 2017;
originally announced June 2017.
-
Conformal Titanium Nitride in a Porous Silicon Matrix: a Nanomaterial for In-Chip Supercapacitors
Authors:
Kestutis Grigoras,
Jari Keskinen,
Leif Grönberg,
Elina Yli-Rantala,
Sampo Laakso,
Hannu Välimäki,
Pertti Kauranen,
Jouni Ahopelto,
Mika Prunnila
Abstract:
Today's supercapacitor energy storages are typically discrete devices aimed for printed boards and power applications. The development of autonomous sensor networks and wearable electronics and the miniaturisation of mobile devices would benefit substantially from solutions in which the energy storage is integrated with the active device. Nanostructures based on porous silicon (PS) provide a route…
▽ More
Today's supercapacitor energy storages are typically discrete devices aimed for printed boards and power applications. The development of autonomous sensor networks and wearable electronics and the miniaturisation of mobile devices would benefit substantially from solutions in which the energy storage is integrated with the active device. Nanostructures based on porous silicon (PS) provide a route towards integration due to the very high inherent surface area to volume ratio and compatibility with microelectronics fabrication processes. Unfortunately, pristine PS has limited wettability and poor chemical stability in electrolytes and the high resistance of the PS matrix severely limits the power efficiency. In this work, we demonstrate that excellent wettability and electro-chemical properties in aqueous and organic electrolytes can be obtained by coating the PS matrix with an ultra-thin layer of titanium nitride by atomic layer deposition. Our approach leads to very high specific capacitance (15 F/cm$^3$), energy density (1.3 mWh/cm$^3$), power density (up to 214 W/cm$^3$) and excellent stability (more than 13,000 cycles). Furthermore, we show that the PS-TiN nanomaterial can be integrated inside a silicon chip monolithically by combining MEMS and nanofabrication techniques. This leads to realisation of in-chip supercapacitor, i.e., it opens a new way to exploit the otherwise inactive volume of a silicon chip to store energy.
△ Less
Submitted 2 March, 2016;
originally announced March 2016.
-
Kinetic Inductance Magnetometer
Authors:
Juho Luomahaara,
Visa Vesterinen,
Leif Grönberg,
Juha Hassel
Abstract:
Ultrasensitive magnetic field detection is utilized in the fields of science, medicine and industry. We report on a novel magnetometer relying on the kinetic inductance of superconducting material. The kinetic inductance exhibits a non-linear response with respect to DC current, a fact that is exploited by applying magnetic flux through a superconducting loop to generate a shielding current and a…
▽ More
Ultrasensitive magnetic field detection is utilized in the fields of science, medicine and industry. We report on a novel magnetometer relying on the kinetic inductance of superconducting material. The kinetic inductance exhibits a non-linear response with respect to DC current, a fact that is exploited by applying magnetic flux through a superconducting loop to generate a shielding current and a change in the inductance of the loop. The magnetometer is arranged into a resonator, allowing readout through a transmission measurement that makes the device compatible with radio frequency multiplexing techniques. The device is fabricated using a single thin-film layer of NbN, simplifying the fabrication process compared to existing magnetometer technologies considerably. Our experimental data, supported by theory, demonstrates a magnetometer having potential to replace established technology in applications requiring ultra-high sensitivity.
△ Less
Submitted 3 January, 2014;
originally announced January 2014.
-
Verification of stable operation of rapid single flux quantum devices with selective dissipation
Authors:
J. Hassel,
L. Gronberg,
P. Helisto
Abstract:
It has been suggested that Rapid Single Flux Quantum (RSFQ) devices could be used as the classical interface of superconducting qubit systems. One problem is that the interface acts as a dissipative environment for a qubit. Recently ways to modify the RSFQ damping to reduce the dissipation have been introduced. One of the solutions is to damp the Josephson junctions by a frequency-dependent line…
▽ More
It has been suggested that Rapid Single Flux Quantum (RSFQ) devices could be used as the classical interface of superconducting qubit systems. One problem is that the interface acts as a dissipative environment for a qubit. Recently ways to modify the RSFQ damping to reduce the dissipation have been introduced. One of the solutions is to damp the Josephson junctions by a frequency-dependent linear circuit instead of the plain resistor. The approach has previously been experimentally tested with a simple SFQ comparator. In this paper we perform experiments with a full RSFQ circuit, and thus conclude that in terms of stable operation the approach is applicable for scalable RSFQ circuits. Realisation and optimisation issues are also discussed.
△ Less
Submitted 5 February, 2007;
originally announced February 2007.
-
High resolution superconducting single flux quantum comparator for sub kelvin temperatures
Authors:
A. M. Savin,
J. P. Pekola,
T. Holmqvist,
J. Hassel,
L. Grönberg,
P. Helistö,
A. Kidiyarova-Shevchenko
Abstract:
A design of subkelvin single flux quantum (SFQ) circuits with reduced power dissipation and additional cooling of shunt resistors for superconducting qubit control circuits has been developed and characterized. We demonstrate operation of SFQ comparators with current resolution of 40 nA at 2 GHz sampling rate. Due to improved cooling the electron temperature in shunt resistors of a SFQ comparato…
▽ More
A design of subkelvin single flux quantum (SFQ) circuits with reduced power dissipation and additional cooling of shunt resistors for superconducting qubit control circuits has been developed and characterized. We demonstrate operation of SFQ comparators with current resolution of 40 nA at 2 GHz sampling rate. Due to improved cooling the electron temperature in shunt resistors of a SFQ comparator is below 50 mK when the bath temperature is about 30 mK.
△ Less
Submitted 29 June, 2006;
originally announced June 2006.
-
Description of self-synchronization effects in distributed Josephson junction arrays using harmonic analysis and power balance
Authors:
J. Hassel,
L. Gronberg,
P. Helisto,
H. Seppa
Abstract:
Power generation and synchronisation in Josephson junction arrays have attracted attention for a long time. This stems from fundamental interest in nonlinear coupled systems as well as from potential in practical applications. In this paper we study the case of an array of junctions coupled to a distributed transmission line either driven by an external microwave or in a self-oscillating mode. W…
▽ More
Power generation and synchronisation in Josephson junction arrays have attracted attention for a long time. This stems from fundamental interest in nonlinear coupled systems as well as from potential in practical applications. In this paper we study the case of an array of junctions coupled to a distributed transmission line either driven by an external microwave or in a self-oscillating mode. We simplify the theoretical treatment in terms of harmonic analysis and power balance. We apply the model to explain the large operation margins of SNS- and SINIS-junction arrays. We show the validity of the approach by comparing with experiments and simulations with self-oscillating es-SIS junction arrays.
△ Less
Submitted 19 May, 2006;
originally announced May 2006.
-
Characterization of a fabrication process for the integration of superconducting qubits and RSFQ circuits
Authors:
Maria Gabriella Castellano,
Leif Gronberg,
Pasquale Carelli,
Fabio Chiarello,
Carlo Cosmelli,
Roberto Leoni,
Stefano Poletto,
Guido Torrioli,
Juha Hassel,
Panu Helisto
Abstract:
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low…
▽ More
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low dissipated power on the RSFQ side. For this purpose, VTT has developed a fabrication process based on Nb trilayer technology, which allows the on-chip integration of superconducting qubits and RSFQ circuits even at very low temperature. Here we present the characterization (at 4.2 K) of the process from the point of view of the Josephson devices and show that they are suitable to build integrated superconducting qubits.
△ Less
Submitted 24 April, 2006;
originally announced April 2006.
