Showing 1–27 of 27 results for author: Grassellino, A

Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

Authors: Richard H. J. Kim, Samuel J. Haeuser, Joong-Mok Park, Randall K. Chan, Jin-Su Oh, Thomas Koschny, Lin Zhou, Matthew J. Kramer, Akshay A. Murthy, Mustafa Bal, Francesco Crisa, Sabrina Garattoni, Shaojiang Zhu, Andrei Lunin, David Olaya, Peter Hopkins, Alex Romanenko, Anna Grassellino, Jigang Wang

Abstract: Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewal… ▽ More Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Experimental Observation of Short-Range Magnetic Correlations in Amorphous Nb$_2$O$_5$ and Ta$_2$O$_5$ Thin Films

Authors: Y. V. Krasnikova, A. A. Murthy, D. Bafia, F. Crisa, A. Clairmont, Z. Sung, J. Lee, A. Cano, M. Shinde, D. M. T. van Zanten, M. Bal, A. Romanenko, A. Grassellino, R. Dhundwal, D. Fuchs, T. Reisinger, I. M. Pop, A. Suter, T. Prokscha, Z. Salman

Abstract: We used muon spin rotation/relaxation/resonance ($μ$SR) to investigate the magnetic properties of niobium pentoxide (Nb$_2$O$_5$) and tantalum pentoxide (Ta$_2$O$_5$) thin films. In their amorphous phase (sputter-deposited), both oxides exhibit magnetic behavior down to 2.8 K. However, the magnetic response is strongly structure-dependent: thermally-oxidized, poly-crystalline Ta$_2$O$_5$ shows sup… ▽ More We used muon spin rotation/relaxation/resonance ($μ$SR) to investigate the magnetic properties of niobium pentoxide (Nb$_2$O$_5$) and tantalum pentoxide (Ta$_2$O$_5$) thin films. In their amorphous phase (sputter-deposited), both oxides exhibit magnetic behavior down to 2.8 K. However, the magnetic response is strongly structure-dependent: thermally-oxidized, poly-crystalline Ta$_2$O$_5$ shows suppressed magnetism, while amorphous Ta$_2$O$_5$ demonstrates local static magnetism. In contrast, amorphous Nb$_2$O$_5$ is significantly more magnetically disordered. These results suggest that magnetic inhomogeneity in the native oxides of Ta and Nb may be a key factor in the performance of superconducting devices, particularly limiting T$_1$ for qubits and resonators. △ Less

Submitted 12 May, 2025; originally announced May 2025.

Comments: 14 pages, 17 figures

Report number: FERMILAB-PUB-25-0325-SQMS

Quantifying Trapped Magnetic Vortex Losses in Niobium Resonators at mK Temperatures

Authors: D. Bafia, B. Abdisatarov, R. Pilipenko, Y. Lu, G. Eremeev, A. Romanenko, A. Grassellino

Abstract: Trapped magnetic vortices in niobium introduce microwave losses that degrade the performance of superconducting resonators. While such losses have been extensively studied above 1~K, we report here their direct quantification in the millikelvin and low-photon regime relevant to quantum devices. Using a high-quality factor 3-D niobium cavity cooled through its superconducting transition in controll… ▽ More Trapped magnetic vortices in niobium introduce microwave losses that degrade the performance of superconducting resonators. While such losses have been extensively studied above 1~K, we report here their direct quantification in the millikelvin and low-photon regime relevant to quantum devices. Using a high-quality factor 3-D niobium cavity cooled through its superconducting transition in controlled magnetic fields, we isolate flux-induced losses and extract a sensitivity to trapped flux of approximately 2~n$Ω$/mG at 10~mK and 6~GHz. The decay rate is initially dominated by two-level system (TLS) losses from the native niobium pentoxide, with vortex-induced degradation of $T_1$ occurring above $B_{\text{trap}}\sim$~50~mG. In the absence of the oxide, even 10~mG of trapped flux limits performance $Q_0\sim$~10$^{10}$, or $T_1\sim$~350~ms, underscoring the need for stringent magnetic shielding. The sensitivity decreases with temperature and remains largely field-independent, whereas the flux-induced frequency shift exhibits a minimum near 0.8~K. These behaviors are well modeled assuming the thermal activation of pinning centers within the Gittleman-Rosenblum framework. Our results suggest that niobium-based transmon qubits can tolerate vortex-induced dissipation at trapped field levels up to several hundred mG, but achieving long coherence times still requires careful magnetic shielding to suppress lower-field losses from other mechanisms. △ Less

Submitted 27 May, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

Authors: Akshay A. Murthy, Mustafa Bal, Michael J. Bedzyk, Hilal Cansizoglu, Randall K. Chan, Venkat Chandrasekhar, Francesco Crisa, Amlan Datta, Yanpei Deng, Celeo D. Matute Diaz, Vinayak P. Dravid, David A. Garcia-Wetten, Sabrina Garattoni, Sunil Ghimire, Dominic P. Goronzy, Sebastian de Graaf, Sam Haeuser, Mark C. Hersam, Peter Hopkins, Dieter Isheim, Kamal Joshi, Richard Kim, Saagar Kolachina, Cameron J. Kopas, Matthew J. Kramer , et al. (24 additional authors not shown)

Abstract: The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying… ▽ More The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values. △ Less

Submitted 2 June, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch

Authors: Cameron J. Kopas, Dominic P. Goronzy, Thang Pham, Carlos G. Torres Castanedo, Matthew Cheng, Rory Cochrane, Patrick Nast, Ella Lachman, Nikolay Z. Zhelev, Andre Vallieres, Akshay A. Murthy, Jin-su Oh, Lin Zhou, Matthew J. Kramer, Hilal Cansizoglu, Michael J. Bedzyk, Vinayak P. Dravid, Alexander Romanenko, Anna Grassellino, Josh Y. Mutus, Mark C. Hersam, Kameshwar Yadavalli

Abstract: The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and t… ▽ More The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS. △ Less

Submitted 5 August, 2024; originally announced August 2024.

Direct Measurement of Microwave Loss in Nb Films for Superconducting Qubits

Authors: B. Abdisatarov, D. Bafia, A. Murthy, G. Eremeev, H. E. Elsayed-Ali, J. Lee, A. Netepenko, C. P. A. Carlos, S. Leith, G. J. Rosaz, A. Romanenko, A. Grassellino

Abstract: Niobium films are a key component in modern two-dimensional superconducting qubits, yet their contribution to the total qubit decay rate is not fully understood. The presence of different layers of materials and interfaces makes it difficult to identify the dominant loss channels in present two-dimensional qubit designs. In this paper we present the first study which directly correlates measuremen… ▽ More Niobium films are a key component in modern two-dimensional superconducting qubits, yet their contribution to the total qubit decay rate is not fully understood. The presence of different layers of materials and interfaces makes it difficult to identify the dominant loss channels in present two-dimensional qubit designs. In this paper we present the first study which directly correlates measurements of RF losses in such films to material parameters by investigating a high-power impulse magnetron sputtered (HiPIMS) film atop a three-dimensional niobium superconducting radiofrequency (SRF) resonator. By using a 3D SRF structure, we are able to isolate the niobium film loss from other contributions. Our findings indicate that microwave dissipation in the HiPIMS-prepared niobium films, within the quantum regime, resembles that of record-high intrinsic quality factor of bulk niobium SRF cavities, with lifetimes extending into seconds. Microstructure and impurity level of the niobium film do not significantly affect the losses. These results set the scale of microwave losses in niobium films and show that niobium losses do not dominate the observed coherence times in present two-dimensional superconducting qubit designs, instead highlighting the dominant role of the dielectric oxide in limiting the performance. We can also set a bound for when niobium film losses will become a limitation for qubit lifetimes. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 20 pages, 8 figures

Magnetic Fluctuations in Niobium Pentoxide

Authors: Y. Krasnikova, A. A. Murthy, F. Crisa, M. Bal, Z. Sung, J. Lee, A. Cano, D. M. T. van Zanten, A. Romanenko, A. Grassellino, A. Suter, T. Prokscha, Z. Salman

Abstract: Using a spin-polarized muon beam we were able to capture magnetic dynamics in an amorphous niobium pentoxide thin film. Muons are used to probe internal magnetic fields produced by defects. Magnetic fluctuations could be described by the dynamical Kubo-Toyabe model considering a time-dependent local magnetic field. We state that observed fluctuations result from the correlated motion of electron s… ▽ More Using a spin-polarized muon beam we were able to capture magnetic dynamics in an amorphous niobium pentoxide thin film. Muons are used to probe internal magnetic fields produced by defects. Magnetic fluctuations could be described by the dynamical Kubo-Toyabe model considering a time-dependent local magnetic field. We state that observed fluctuations result from the correlated motion of electron spins. We expect that oxygen vacancies play a significant role in these films and lead to a complex magnetic field distribution which is non-stationary. The characteristic average rate of magnetic field change is on the order of 100~MHz. The observed dynamics may provide insight into potential noise sources in Nb-based superconducting devices, while also highlighting the limitations imposed by amorphous oxides. △ Less

Submitted 17 December, 2023; originally announced December 2023.

Comments: 8 pages, 7 figures

Report number: FERMILAB-PUB-23-642-SQMS

Quasiparticle spectroscopy in technologically-relevant niobium using London penetration depth measurements

Authors: Sunil Ghimire, Kamal R. Joshi, Amlan Datta, Aidan Goerdt, Makariy A. Tanatar, Deborah Schlagel, Matthew J. Kramer, Jayss Marshall, Cameron J. Copas, Joshua Y. Mutus, Alexander Romanenko, Anna Grassellino, Ruslan Prozorov

Abstract: London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling,… ▽ More London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling, we correlate these different behaviors with known pair-breaking mechanisms and show that such measurements may help distinguish between different pair-breaking mechanisms, such as niobium hydrides and two-level systems (TLS). The conclusions also apply to SRF cavities when tracking the temperature-dependent quality factor and the resonant frequency. △ Less

Submitted 23 June, 2023; originally announced June 2023.

Journal ref: Materials for Quantum Technology 4, 45201 (2024)

First Direct Observation of Nanometer size Hydride Precipitations on Superconducting Niobium

Authors: Zu Hawn Sung, Arely Cano, Akshay Murthy, Evguenia Karapetrova, Jaeyel Lee, Martina Martinello, Anna Grassellino, Alexander Romanenko

Abstract: Superconducting niobium serves as a key enabling material for superconducting radio frequency (SRF) technology as well as quantum computing devices. At room temperature, hydrogen commonly occupies tetragonal sites in the Nb lattice as metal (M)-gas (H) phase. When the temperature is decreased, however, solid solution of Nb-H starts to be precipitated. In this study, we show the first identified to… ▽ More Superconducting niobium serves as a key enabling material for superconducting radio frequency (SRF) technology as well as quantum computing devices. At room temperature, hydrogen commonly occupies tetragonal sites in the Nb lattice as metal (M)-gas (H) phase. When the temperature is decreased, however, solid solution of Nb-H starts to be precipitated. In this study, we show the first identified topographical features associated with nanometer-size hydride phase (Nb1-xHx) precipitates on metallic superconducting niobium using cryogenic-atomic force microscopy (AFM). Further, high energy grazing incidence X-ray diffraction reveals information regarding the structure and stoichiometry that these precipitates exhibit. Finally, through time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we are able to locate atomic hydrogen sources near the top surface. This systematic study further explains localized degradation of RF superconductivity by the proximity effect due to hydrogen clusters. △ Less

Submitted 1 May, 2023; originally announced May 2023.

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

Authors: Mustafa Bal, Akshay A. Murthy, Shaojiang Zhu, Francesco Crisa, Xinyuan You, Ziwen Huang, Tanay Roy, Jaeyel Lee, David van Zanten, Roman Pilipenko, Ivan Nekrashevich, Andrei Lunin, Daniel Bafia, Yulia Krasnikova, Cameron J. Kopas, Ella O. Lachman, Duncan Miller, Josh Y. Mutus, Matthew J. Reagor, Hilal Cansizoglu, Jayss Marshall, David P. Pappas, Kim Vu, Kameshwar Yadavalli, Jin-Su Oh , et al. (15 additional authors not shown)

Abstract: We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigati… ▽ More We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes. △ Less

Submitted 24 January, 2024; v1 submitted 25 April, 2023; originally announced April 2023.

Journal ref: npj Quantum Inf 10, 43 (2024)

Millikelvin measurements of permittivity and loss tangent of lithium niobate

Authors: Silvia Zorzetti, Changqing Wang, Ivan Gonin, Sergey Kazakov, Timergali Khabiboulline, Alexander Romanenko, Vyacheslav P Yakovlev, Anna Grassellino

Abstract: Lithium Niobate is an electro-optic material with many applications in microwave signal processing, communication, quantum sensing, and quantum computing. In this letter, we present findings on evaluating the complex electromagnetic permittivity of lithium niobate at millikelvin temperatures. Measurements are carried out using a resonant-type method with a superconducting radio-frequency (SRF) cav… ▽ More Lithium Niobate is an electro-optic material with many applications in microwave signal processing, communication, quantum sensing, and quantum computing. In this letter, we present findings on evaluating the complex electromagnetic permittivity of lithium niobate at millikelvin temperatures. Measurements are carried out using a resonant-type method with a superconducting radio-frequency (SRF) cavity operating at 7 GHz and designed to characterize anisotropic dielectrics. The relative permittivity tensor and loss tangent are measured at 50 mK with unprecedented accuracy. △ Less

Submitted 31 May, 2023; v1 submitted 24 February, 2023; originally announced February 2023.

Comments: 5 pages, 4 figures

Understanding the Mechanism of the Performance Improvement in Nitrogen-doped Niobium Superconducting Radio Frequency Cavity

Authors: Xiaotian Fang, Jin-Su Oh, Matt Kramer, A. Romanenko, A. Grassellino, John Zasadzinski, Lin Zhou

Abstract: Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen doping surface treatment can consistently increase cavity performance by reducing surface resistance, but the improvement mechanism is not fully understood. Herein, we employed transmission el… ▽ More Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen doping surface treatment can consistently increase cavity performance by reducing surface resistance, but the improvement mechanism is not fully understood. Herein, we employed transmission electron microscopy and spectroscopy to uncover the structural and chemical differences of the Nb-air interface between the non-doped and nitrogen-doped cavities. The results indicate that nitrogen doping passivates the Nb surface by introducing a compressive strain close to the Nb/air interface, which impedes the oxygen diffusion and hydrogen atoms and reduces surface oxide thickness. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 5 figures

Stress-induced omega phase transition in Nb thin films for superconducting qubits

Authors: Jaeyel Lee, Zuhawn Sung, Akshay A. Murthy, Anna Grassellino, Alex Romanenko

Abstract: We report the observation of omega phase formation in Nb thin films deposited by high-power impulse magnetron sputtering (HiPIMS) for superconducting qubits using transmission electron microscopy (TEM). We hypothesize that this phase transformation to the omega phase with hexagonal structure from bcc phase as well as the formation of {111}<112> mechanical twins is induced by internal stress in the… ▽ More We report the observation of omega phase formation in Nb thin films deposited by high-power impulse magnetron sputtering (HiPIMS) for superconducting qubits using transmission electron microscopy (TEM). We hypothesize that this phase transformation to the omega phase with hexagonal structure from bcc phase as well as the formation of {111}<112> mechanical twins is induced by internal stress in the Nb thin films. In terms of lateral dimensions, the size of the omega phase of Nb range from 10 to 100 nm, which is comparable to the coherence length of Nb (~40 nm). In terms of overall volume fraction, ~1 vol.% of the Nb grains exhibit this omega phase. We also find that the omega phase in Nb is not observed in large grain Nb samples, suggesting that the phase transition can be suppressed through reducing the grain boundary density, which may serve as a source of strain and dislocations in this system. The current finding may indicate that the Nb thin film is prone to the omega phase transition due to the internal stress in the Nb thin film. We conclude by discussing effects of the omega phase on the superconducting properties of Nb thin films and discussing pathways to mitigate their formation. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: 5 pages, 4 figures

Multi-modal electron microscopy study on decoherence sources and their stability in Nb based superconducting qubit

Authors: Jin-Su Oh, Xiaotian Fang, Tae-Hoon Kim, Matt Lynn, Matt Kramer, Mehdi Zarea, James A. Sauls, A. Romanenko, S. Posen, A. Grassellino, Cameron J. Kopas, Mark Field, Jayss Marshall, Hilal Cansizoglu, Joshua Y. Mutus, Matthew Reagor, Lin Zhou

Abstract: Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system defects at interfaces, such as the Nb/Si and Nb/air interface. One way to improve the Nb/air interface quality is by thermal annealing, as shown by extensive stud… ▽ More Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system defects at interfaces, such as the Nb/Si and Nb/air interface. One way to improve the Nb/air interface quality is by thermal annealing, as shown by extensive studies in 3D superconducting radio frequency (SRF) cavities. However, it is unclear how the microstructure and chemistry of the interface structures change during heat treatment. To address this knowledge gap, we comprehensively characterized Nb films deposited on Si wafers by physical vapor deposition, including (1) an Nb film from a transmon and (2) an Nb film without any patterning step, using an aberration-corrected transmission electron microscope. Both Nb films exhibit columnar growth with strong [110] textures. There is a double layer between the Nb film and Si substrate, which are amorphous niobium silicides with different Nb and Si concentrations. After in-situ heating of the heterostructure at 360°C inside the microscope, the composition of the double layers at the Nb-Si interface remains almost the same despite different thickness changes. The initial amorphous niobium oxide layer on Nb surface decomposes into face-centered cubic Nb nanograins in the amorphous Nb-O matrix upon heating. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Developing a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit

Authors: Akshay A. Murthy, Paul Masih Das, Stephanie M. Ribet, Cameron Kopas, Jaeyel Lee, Matthew J. Reagor, Lin Zhou, Matthew J. Kramer, Mark C. Hersam, Mattia Checchin, Anna Grassellino, Roberto dos Reis, Vinayak P. Dravid, Alexander Romanenko

Abstract: Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a… ▽ More Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO$_2$ found closer to the niobium film and Nb$_2$O$_5$ found closer to the surface. In terms of structural analysis, we find that the Nb$_2$O$_5$ region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb$_2$O$_5$ that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb$_2$O$_5$ region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems. △ Less

Submitted 28 July, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: 13 pages, 4 figures

Materials and devices for fundamental quantum science and quantum technologies

Authors: Marco Polini, Francesco Giazotto, Kin Chung Fong, Ioan M. Pop, Carsten Schuck, Tommaso Boccali, Giovanni Signorelli, Massimo D'Elia, Robert H. Hadfield, Vittorio Giovannetti, Davide Rossini, Alessandro Tredicucci, Dmitri K. Efetov, Frank H. L. Koppens, Pablo Jarillo-Herrero, Anna Grassellino, Dario Pisignano

Abstract: Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In thi… ▽ More Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In this Perspective, we focus on advanced superconducting materials, van der Waals materials, and moiré quantum matter, summarizing recent exciting developments and highlighting a wealth of potential applications, ranging from high-energy experimental and theoretical physics to quantum materials science and energy storage. △ Less

Submitted 23 January, 2022; originally announced January 2022.

Comments: 19 pages, 4 figures, 215 references, Perspective article on solid-state quantum technologies

Internal Friction Measures to Study Precipitates Formation in EP and N-Doped Bulk Nb for SRF Applications

Authors: Tiziana Spina, Anna Grassellino, Alexander Romanenko

Abstract: Main focus of this study is the investigation of thermodynamics phenomena responsible for the High Field Q Slope (HFQS) in SRF cavities by Internal Friction (IF) measurement. Mechanical spectroscopy is, indeed, a well-established technique to study precipitate formations in BCC materials and several works on the effects of impurities as N and O on the Snoek peak have been published so far and will… ▽ More Main focus of this study is the investigation of thermodynamics phenomena responsible for the High Field Q Slope (HFQS) in SRF cavities by Internal Friction (IF) measurement. Mechanical spectroscopy is, indeed, a well-established technique to study precipitate formations in BCC materials and several works on the effects of impurities as N and O on the Snoek peak have been published so far and will be taken as reference to explain the mechanisms behind the observed dissipation effects. Internal Friction measurements were performed in Belgium at IMCE on Nb rectangular shape samples with different RRR values prepared at Fermilab by using Electro Polishing (EP), N-doping and heat treatments in order to reproduce the same conditions during the standard treatments applied on bulk Nb SRF cavities. From IF spectra, the H trapping mechanism by interstitial atoms (N and O and/or vacancies, depending on the purity level, RRR) can be easily recognized leading to results that perfectly corroborate previous findings on Q-disease, HFQS and RRR phenomena. △ Less

Submitted 16 September, 2021; originally announced September 2021.

Discovery of Nb hydride precipitates in superconducting qubits

Authors: Jaeyel Lee, Zuhawn Sung, Akshay A. Murthy, Matt Reagor, Anna Grassellino, Alexander Romanenko

Abstract: We report the first evidence of the formation of niobium hydrides within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. We combine complementary techniques including room and cryogenic temperature atomic scale high-resolution and scanning transmission electron microscopy (HR-TEM and STEM), atomic force microscopy (AFM), and the time-of-flight seconda… ▽ More We report the first evidence of the formation of niobium hydrides within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. We combine complementary techniques including room and cryogenic temperature atomic scale high-resolution and scanning transmission electron microscopy (HR-TEM and STEM), atomic force microscopy (AFM), and the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) to reveal the existence of the niobium hydride precipitates directly in the Rigetti chip areas. Electron diffraction and high-resolution transmission electron microscopy (HR-TEM) analyses are performed at room and cryogenic temperatures (~106 K) on superconducting qubit niobium film areas, and reveal the formation of three types of Nb hydride domains with different crystalline orientations and atomic structures. There is also variation in their size and morphology from small (~5 nm) irregular shape domains within the Nb grains to large (~10-100 nm) Nb grains fully converted to niobium hydride. As niobium hydrides are non-superconducting and can easily change in size and location upon different cooldowns to cryogenic temperatures, our findings highlight a new previously unknown source of decoherence in superconducting qubits, contributing to both quasiparticle and two-level system (TLS) losses, and offering a potential explanation for qubit performance changes upon cooldowns. A pathway to mitigate the formation of the Nb hydrides for superconducting qubit applications is also discussed. △ Less

Submitted 26 September, 2023; v1 submitted 23 August, 2021; originally announced August 2021.

Signatures of Enhanced Superconducting Properties in Niobium Cavities

Authors: D. Bafia, A. Grassellino, M. Checchin, J. F. Zasadzinski, A. Romanenko

Abstract: Superconducting radio-frequency (SRF) niobium cavities are critical for modern particle accelerators, as well as for advancing superconducting quantum systems and enabling ultra-sensitive searches for new physics. In this work, we report a systematic observation of an anomalous frequency dip in Nb cavities, which occurs at temperatures just below the critical temperature ($T_\mathrm{c}$), indicati… ▽ More Superconducting radio-frequency (SRF) niobium cavities are critical for modern particle accelerators, as well as for advancing superconducting quantum systems and enabling ultra-sensitive searches for new physics. In this work, we report a systematic observation of an anomalous frequency dip in Nb cavities, which occurs at temperatures just below the critical temperature ($T_\mathrm{c}$), indicative of enhanced superconducting properties at $T \ll T_c$. The magnitude of this dip is strongly correlated with the RF surface resistance, impurity distribution near the surface, and $T_\mathrm{c}$. Additionally, we report measurements of the coherence peak in the AC conductivity of two Nb SRF cavities processed using distinct methods. By comparing recent theories developed to model this experimental data, we show that the frequency dip feature, larger coherence peak height, and reduction in the temperature-dependent surface resistance with RF current occur at minimal but finite levels of disorder. △ Less

Submitted 1 April, 2025; v1 submitted 18 March, 2021; originally announced March 2021.

Comments: 8 pages, 5 figures, 2 tables

Vortex Dynamics and Dissipation Under High-amplitude Microwave Drive

Authors: Mattia Checchin, Anna Grassellino

Abstract: In this paper, we describe the vortex dynamics under high-amplitude microwave drive and its effect on the surface resistance of superconductors. The vortex surface resistance is calculated with a Montecarlo approach, where the vortex motion equation is solved for a collection of vortex flux lines each oscillating within a random pinning landscape. This approach is capable of providing a detailed d… ▽ More In this paper, we describe the vortex dynamics under high-amplitude microwave drive and its effect on the surface resistance of superconductors. The vortex surface resistance is calculated with a Montecarlo approach, where the vortex motion equation is solved for a collection of vortex flux lines each oscillating within a random pinning landscape. This approach is capable of providing a detailed description of the microscopic vortex dynamics and in turn important insights into the microwave field amplitude dependence of the vortex surface resistance. The numerical simulations are compared against experimental data of vortex surface resistance at high microwave amplitude measured by means of bulk niobium superconducting-radio frequency cavities operating at 1.3 GHz. The good qualitative agreement of simulations and experiments suggests that the non-linear dependence of the trapped flux surface resistance with the microwave field amplitude is generated by progressive microwave depinning and vortex jumps. △ Less

Submitted 4 May, 2020; v1 submitted 10 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. Applied 14, 044018 (2020)

Three-dimensional superconducting resonators at $T < 20$ mK with the photon lifetime up to $τ=2$ seconds

Authors: A. Romanenko, R. Pilipenko, S. Zorzetti, D. Frolov, M. Awida, S. Belomestnykh, S. Posen, A. Grassellino

Abstract: Very high quality factor superconducting radio frequency cavities developed for accelerators can enable fundamental physics searches with orders of magnitude higher sensitivity, as well as offer a path to a 1000-fold increase in the achievable coherence times for cavity-stored quantum states in the 3D circuit QED architecture. Here we report the first measurements of multiple accelerator cavities… ▽ More Very high quality factor superconducting radio frequency cavities developed for accelerators can enable fundamental physics searches with orders of magnitude higher sensitivity, as well as offer a path to a 1000-fold increase in the achievable coherence times for cavity-stored quantum states in the 3D circuit QED architecture. Here we report the first measurements of multiple accelerator cavities of $f_0=$1.3, 2.6, 5 GHz resonant frequencies down to temperatures of about 10~mK and field levels down to a few photons, which reveal record high photon lifetimes up to 2 seconds, while also further exposing the role of the two level systems (TLS) in the niobium oxide. We also demonstrate how the TLS contribution can be greatly suppressed by the vacuum heat treatments at 340-450$^\circ$C. △ Less

Submitted 23 December, 2019; v1 submitted 8 October, 2018; originally announced October 2018.

Comments: revised version

Journal ref: Phys. Rev. Applied 13, 034032 (2020)

Insight into bulk niobium superconducting RF cavities performances by tunneling spectroscopy

Authors: N. R. Groll, G. Ciovati, A. Grassellino, A. Romanenko, J. F. Zasadzinski, T. Proslier

Abstract: Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a high field Q drop for acceleration field E $>$ 20 MV/m and a nitrogen doped (N-doped) cavity that exhibits an increasing Q up to fields approaching 15 MV/m. The CP… ▽ More Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a high field Q drop for acceleration field E $>$ 20 MV/m and a nitrogen doped (N-doped) cavity that exhibits an increasing Q up to fields approaching 15 MV/m. The CP cavity displays hot spot regions at high RF fields where Q-drop occurs as well as unaffected regions (cold spots). PCT data on cold spots reveals a near ideal BCS density of states (DOS) with gap parameters, $Δ$ as high as 1.62 meV, that are among the highest values ever reported for Nb. Hot spot regions exhibit a wide distribution of gap values down to $Δ\sim$ 1.0 meV and DOS broadening characterized by a relatively large value of pair-breaking rate, $Γ$, indicating surface regions of significantly reduced superconductivity. In addition, hot spots commonly exhibit Kondo tunneling peaks indicative of surface magnetic moments attributed to a defective oxide. N-doped cavities reveal a more homoegeneous gap distribution centered at $Δ\sim$ 1.5 meV and relatively small values of $Γ/Δ$. The absence of regions of significantly reduced superconductivity indicates that the N interstitials are playing an important role in preventing the formation of hydride phases and other macroscopic defects which might otherwise severely affect the local, surface superconductivity that lead to hot spot formation. The N-doped cavities also display a significantly improved surface oxide, i.e., increased thickness and tunnel barrier height, compared to CP cavities. These results help explain the improved performance of N-doped cavities and give insights into the origin of the initial increasing Q with RF amplitude. △ Less

Submitted 16 May, 2018; originally announced May 2018.

Dependence of the residual surface resistance of superconducting RF cavities on the cooling dynamics around $T_\mathrm{c}$

Authors: A. Romanenko, A. Grassellino, O. Melnychuk, D. A. Sergatskov

Abstract: We report a strong effect of the cooling dynamics through $T_\mathrm{c}$ on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120$^\circ$C baking and nitrogen doping. Direct magnetic field measurements on the cavity walls show that t… ▽ More We report a strong effect of the cooling dynamics through $T_\mathrm{c}$ on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120$^\circ$C baking and nitrogen doping. Direct magnetic field measurements on the cavity walls show that the effect stems from changes in the flux trapping efficiency: slow cooling leads to almost complete flux trapping and higher residual resistance while fast cooling leads to the much more efficient flux expulsion and lower residual resistance. △ Less

Submitted 7 March, 2014; v1 submitted 30 January, 2014; originally announced January 2014.

Strong Meissner screening change in superconducting radio frequency cavities due to mild baking

Authors: A. Romanenko, A. Grassellino, F. Barkov, A. Suter, Z. Salman, T. Prokscha

Abstract: We investigate "hot" regions with anomalous high field dissipation in bulk niobium superconducting radio frequency cavities for particle accelerators by using low energy muon spin rotation (LE-$μ$SR) on corresponding cavity cutouts. We demonstrate that superconducting properties at the hot region are well described by the non-local Pippard/BCS model for niobium in the clean limit with a London pen… ▽ More We investigate "hot" regions with anomalous high field dissipation in bulk niobium superconducting radio frequency cavities for particle accelerators by using low energy muon spin rotation (LE-$μ$SR) on corresponding cavity cutouts. We demonstrate that superconducting properties at the hot region are well described by the non-local Pippard/BCS model for niobium in the clean limit with a London penetration depth $λ_\mathrm{L} = 23 \pm 2$ nm. In contrast, a cutout sample from the 120$^\circ$C baked cavity shows a much larger $λ> 100$ nm and a depth dependent mean free path, likely due to gradient in vacancy concentration. We suggest that these vacancies can efficiently trap hydrogen and hence prevent the formation of hydrides responsible for rf losses in hot regions. △ Less

Submitted 27 November, 2013; originally announced November 2013.

Dependence of the microwave surface resistance of superconducting niobium on the magnitude of the rf field

Authors: A. Romanenko, A. Grassellino

Abstract: Utilizing difference in temperature dependencies we decoupled BCS and residual components of the microwave surface resistance of superconducting niobium at all rf fields up to $B_\mathrm{rf}\sim110$ mT. We reveal that the residual resistance decreases with field at $B_\mathrm{rf} \lesssim$ 40 mT and strongly increases in chemically treated niobium at $B_\mathrm{rf} > 80$ mT. We find that BCS surfa… ▽ More Utilizing difference in temperature dependencies we decoupled BCS and residual components of the microwave surface resistance of superconducting niobium at all rf fields up to $B_\mathrm{rf}\sim110$ mT. We reveal that the residual resistance decreases with field at $B_\mathrm{rf} \lesssim$ 40 mT and strongly increases in chemically treated niobium at $B_\mathrm{rf} > 80$ mT. We find that BCS surface resistance is weakly dependent on field in the clean limit, whereas a strong and peculiar field dependence emerges after $120^\circ$C vacuum baking. △ Less

Submitted 16 April, 2013; originally announced April 2013.

Muon spin rotation studies of niobium for superconducting RF applications

Authors: A. Grassellino, C. Beard, P. Kolb, R. Laxdal, N. S. Lockyer, D. Longuevergne, J. E. Sonier

Abstract: In this work we investigate superconducting properties of niobium samples via application of the muon spin rotation/relaxation (muSR) technique. We employ for the first time the muSR technique to study samples that are cutout from large and small grain 1.5 GHz radio frequency (RF) single cell niobium cavities. The RF test of these cavities was accompanied by full temperature mapping to characteriz… ▽ More In this work we investigate superconducting properties of niobium samples via application of the muon spin rotation/relaxation (muSR) technique. We employ for the first time the muSR technique to study samples that are cutout from large and small grain 1.5 GHz radio frequency (RF) single cell niobium cavities. The RF test of these cavities was accompanied by full temperature mapping to characterize the RF losses in each of the samples. Results of the muSR measurements show that standard cavity surface treatments like mild baking and buffered chemical polishing (BCP) performed on the studied samples affect their surface pinning strength. We find an interesting correlation between high field RF losses and field dependence of the sample magnetic volume fraction measured via muSR. The muSR line width observed in ZF-muSR measurements matches the behavior of Nb samples doped with minute amounts of Ta or N impurities. An upper bound for the upper critical field Hc2 of these cutouts is found. △ Less

Submitted 31 March, 2013; v1 submitted 26 March, 2013; originally announced March 2013.

Comments: 20 pages, 14 figures

Journal ref: Phys. Rev. ST Accel. Beams 16, 062002 (2013)

Proximity breakdown of hydrides in superconducting niobium cavities

Authors: A. Romanenko, F. Barkov, L. D. Cooley, A. Grassellino

Abstract: Many modern and proposed future particle accelerators rely on superconducting radio frequency cavities made of bulk niobium as primary particle accelerating structures. Such cavities suffer from the anomalous field dependence of their quality factors Q0. High field degradation - so-called high field Q-slope - is yet unexplained even though an empirical cure is known. Here we propose a mechanism ba… ▽ More Many modern and proposed future particle accelerators rely on superconducting radio frequency cavities made of bulk niobium as primary particle accelerating structures. Such cavities suffer from the anomalous field dependence of their quality factors Q0. High field degradation - so-called high field Q-slope - is yet unexplained even though an empirical cure is known. Here we propose a mechanism based on the presence of proximity-coupled niobium hydrides, which can explain this effect. Furthermore, the same mechanism can be present in any surface-sensitive experiments or superconducting devices involving niobium. △ Less

Submitted 13 January, 2013; v1 submitted 13 December, 2012; originally announced December 2012.

Journal ref: Supercond. Sci. Technol. 26 (2013) 035003