Reduction of Spikes on the Sides of Patterned Thin Films for Magnetic Tunnel Junction Based Molecular Device Fabrication
Authors:
Pawan Tyagi,
Edward Friebe,
Beachrhell Jacques,
Tobias Goulet,
Stanley Travers
Abstract:
Sputter thin film deposition after photolithography often produces unwanted spikes along the side edges. These spikes are a significant issue for the development of magnetic tunnel junction (MTJ)-based memory and molecular spintronics devices, microelectronics, and micro-electro-mechanical systems because they influence the properties of the other films deposited on the top. Our molecular spintron…
▽ More
Sputter thin film deposition after photolithography often produces unwanted spikes along the side edges. These spikes are a significant issue for the development of magnetic tunnel junction (MTJ)-based memory and molecular spintronics devices, microelectronics, and micro-electro-mechanical systems because they influence the properties of the other films deposited on the top. Our molecular spintronics devices that utilize MTJ as the testbed are almost short-lived and encountered high background current that masked the effect of molecular transport channels placed along the sides of MTJs. Therefore, tapered thin film edges are critically needed in devices. Here, we report a very cost-efficient and fast way of creating an optimum photoresist profile for the production of spike-free patterned films. This approach is based on performing a soaking in the photoresist developer after baking and before the UV exposure. However, the success of this method depends on multiple factors accounted for during photolithography - photoresist thickness (spin speed), baking temperature, soaking time and exposure time. Our recent experiments systematically studied the effect of these factors by following the L9 experimental scheme of the Taguchi Design of the experiment (TDOE). We discovered that baking temperature was the most influential parameter; presoak time and photoresist thickness were two other influential factors; exposure time was the least effective factor. We also found that 4000 rpm, 100 C soft baking, 60 s soaking, and 15 s UV exposure yielded the best results. Finally, the paper also discusses the interdependence of selected factors, and the impact of the individual levels of each factor. This study is expected to benefit MEMS and micro/nanoelectronics device researchers because it attempts at finding a cheaper and faster alternative to creating an optimum photoresist profile.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
Nanoscale Tantalum Layer Controlling the Magnetic Coupling between Two Ferromagnetic Electrodes via Insulator of a Magnetic Tunnel Junction
Authors:
Pawan Tyagi,
Tobias Goulet
Abstract:
Ability to tailor the nature of the magnetic coupling between two ferromagnetic electrodes can enable the realization of new spintronics device systems. This paper discusses our finding that deposition of an ultrathin tantalum (Ta) on the NiFe top electrode reversed the nature of inter-ferromagnetic electrode coupling. We observed that the deposition of ~ 5 nm Ta on the top of a magnetic tunnel ju…
▽ More
Ability to tailor the nature of the magnetic coupling between two ferromagnetic electrodes can enable the realization of new spintronics device systems. This paper discusses our finding that deposition of an ultrathin tantalum (Ta) on the NiFe top electrode reversed the nature of inter-ferromagnetic electrode coupling. We observed that the deposition of ~ 5 nm Ta on the top of a magnetic tunnel junction with Ta( 2 nm)/Co(5 nm)/NiFe (5 nm)/AlOx( 2 nm)/NiFe (10-15 nm) configuration changed the magnetic coupling between two ferromagnetic electrodes from antiferromagnetic to ferromagnetic. We investigated Ta effect using multiple magnetic characterizations like ferromagnetic resonance, magnetometry, and polarized neutron reflectometry. Ferromagnetic resonance characterization was very sensitive for detecting the changes in magnetic coupling via the insulating spacer. This simple approach of adding Ta film to alter the magnetic coupling can impact the other burgeoning areas like molecular spintronics. We found that preexisting magnetic coupling between two ferromagnetic electrodes impacted the resultant magnetic properties of magnetic tunnel junctions based molecular spintronics devices.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
