-
Effect of organic solvent on the cold sintering processing of SrFe12O19 platelet-based permanent magnets
Authors:
Aida Serrano,
Eduardo García-Martín,
Cecilia Granados-Miralles,
Jesús López-Sánchez,
Giulio Gorni,
Adrián Quesada,
José F. Fernández
Abstract:
In this work we have investigated the effect of the solvent during the processing of SrFe12O19 platelet-based permanent magnets by cold sintering process (CSP) plus a post-thermal treatment. Several organic solvents: glacial acetic acid, oleic acid and oleylamine have been analyzed, optimizing the CSP temperatures at 190-270 °C, under pressures of 375-670 MPa and 6-50 wt% of solvent. Modifications…
▽ More
In this work we have investigated the effect of the solvent during the processing of SrFe12O19 platelet-based permanent magnets by cold sintering process (CSP) plus a post-thermal treatment. Several organic solvents: glacial acetic acid, oleic acid and oleylamine have been analyzed, optimizing the CSP temperatures at 190-270 °C, under pressures of 375-670 MPa and 6-50 wt% of solvent. Modifications in the morphological and structural properties are identified depending on the solvent, which impacts on the magnetic response. Independently of the solvent, the mechanical integrity of ferrite magnets obtained by CSP is improved by a post-annealing at 1100 °C for 2 h, resulting in relative densities around 92 % with an average grain size of 1 μm and a fraction of SrFe12O19 phase > 91 %. Hc > 2.1 kOe and MS of 73 emu/g are obtained in the final sintered ceramic magnets, exhibiting the highest HC value of 2.8 kOe for the magnet sintered using glacial acetic acid.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
CoSb3-based skutterudite nanocomposites prepared by cold sintering process with enhanced thermoelectric properties
Authors:
Aida Serrano,
Olga Caballero-Calero,
Cecilia Granados-Miralles,
Giulio Gorni,
Cristina V. Manzano,
Marta Rull-Bravo,
Alberto Moure,
Marisol Martín-González,
José F. Fernández
Abstract:
We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures > 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb3 nanocomposites with similar…
▽ More
We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures > 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb3 nanocomposites with similar morphological and structural characteristics to the starting nanopowders obtained by ball milling in air atmosphere. The post-thermal treatment induces grain coalescence and grain growth, crystallite size growth as well as compositional changes in the nanocomposite, decreasing the amount of the main phase, CoSb3, and increasing the weight of secondary phase, CoSb2, up to a 30 wt% at 600 °C. Remarkably, the average valence for the Co, Sb and Te absorbing atoms is neither transformed by the sintering process nor by the subsequent heat treatment. The functional response of the sintered thermoelectric nanocomposites exhibits a maximum figure of merit of 0.12(3) at room temperature for the nanocomposites sintered by CSP with a subsequent post-annealing at 500 °C. This is mainly due to its low thermal conductivity in comparison with similar powders sintered by other approaches, and it is explained by the morphological and structural properties. These findings represent an attractive alternative for obtaining efficient thermoelectric skutterudites by a scalable and cost-effective route.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Hexaferrite-based permanent magnets with upper magnetic properties by cold sintering process via a non-aqueous solvent
Authors:
Aida Serrano,
Eduardo García-Martín,
Cecilia Granados-Miralles,
Giulio Gorni,
Jesús López-Sánchez,
Sandra Ruiz-Gómez,
Lucas Pérez,
Adrián Quesada,
José F. Fernández
Abstract:
The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly competitive magnetic properties reducing the fabrication temperatures and costs. Herein, a novel strategy for developing dense sintered magnets based on Sr-hexaferrites…
▽ More
The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly competitive magnetic properties reducing the fabrication temperatures and costs. Herein, a novel strategy for developing dense sintered magnets based on Sr-hexaferrites with upper functional characteristics is presented. An innovative cold sintering approach using glacial acetic acid as novelty, followed by a post-annealing at 1100 °C, achieves a densification of the ceramic magnets of 92% with respect to the theoretical density and allows controlling the particle growth. After the cold sintering process, a fraction of amorphous SrO is identified, in addition to a partial transformation to α-Fe2O3 as secondary crystalline phase. 46 wt% of SrFe12O19 remains, which is mostly recuperated after the post-thermal treatment. These findings do not significantly modify the final structure of ferrite magnets, neither at short- nor long-range order. The innovative process has a positive impact on the magnetic properties, yielding competitive ferrite magnets at lower sintering temperatures with an energy efficiency of at least 25%, which opens up a new horizon in the field of rare-earth free permanent magnets and new possibilities in other applications.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Effect of annealing in the formation of well crystallized and textured SrFe$_{12}$O$_{19}$ films grown by RF magnetron sputtering
Authors:
G. D. Soria,
A. Serrano,
J. E. Prieto,
A. Quesada,
G. Gorni,
J. de la Figuera,
J. F. Marco
Abstract:
We have studied the influence of annealing treatment on the crystalline growth of SrFe_12_O_19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without \textit{ex-situ} heating step, have been analysed and compared to determine the differences in their structural, compositional and magnetic properties. The results…
▽ More
We have studied the influence of annealing treatment on the crystalline growth of SrFe_12_O_19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without \textit{ex-situ} heating step, have been analysed and compared to determine the differences in their structural, compositional and magnetic properties. The results obtained by the different analysis techniques, in particular Mössbauer spectroscopy together with EXAFS and XANES data, suggest that the as-grown film is composed of nanocrystalline maghemite nanoparticles and amorphous strontium oxide. A strontium hexaferrite canonical structure with c-axis orientation in the sample plane was found for the annealed film.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
