-
Spontaneous anomalous Hall effect arising from an unconventional compensated magnetic phase in a semiconductor
Authors:
R. D. Gonzalez Betancourt,
J. Zubáč,
R. J. Gonzalez-Hernandez,
K. Geishendorf,
Z. Šobáň,
G. Springholz,
K. Olejník,
L. Šmejkal,
J. Sinova,
T. Jungwirth,
S. T. B. Goennenwein,
A. Thomas,
H. Reichlová,
J. Železný,
D. Kriegner
Abstract:
The anomalous Hall effect, commonly observed in metallic magnets, has been established to originate from the time-reversal symmetry breaking by an internal macroscopic magnetization in ferromagnets or by a non-collinear magnetic order. Here we observe a spontaneous anomalous Hall signal in the absence of an external magnetic field in an epitaxial film of MnTe, which is a semiconductor with a colli…
▽ More
The anomalous Hall effect, commonly observed in metallic magnets, has been established to originate from the time-reversal symmetry breaking by an internal macroscopic magnetization in ferromagnets or by a non-collinear magnetic order. Here we observe a spontaneous anomalous Hall signal in the absence of an external magnetic field in an epitaxial film of MnTe, which is a semiconductor with a collinear antiparallel magnetic ordering of Mn moments and a vanishing net magnetization. The anomalous Hall effect arises from an unconventional phase with strong time-reversal symmetry breaking and alternating spin polarization in real-space crystal structure and momentum-space electronic structure. The anisotropic crystal environment of magnetic Mn atoms due to the non-magnetic Te atoms is essential for establishing the unconventional phase and generating the anomalous Hall effect.
△ Less
Submitted 23 January, 2023; v1 submitted 13 December, 2021;
originally announced December 2021.
-
Effect of pre-oxidation treatments on the structural, microstructural, and chemical properties of (Ni,Pt)Al systems
Authors:
J. E. Garcia-Herrera,
D. G. Espinosa-Arbelaez,
L. A. Caceres-Diaz,
G. C. Mondragon-Rodriguez,
H. Ruiz-Luna,
J. Gonzalez-Hernandez,
J. Munoz-Saldana,
J. M. Alvarado-Orozco
Abstract:
The effect of isothermal pre-oxidation treatments on the \b{eta}-(Ni,Pt)Al + René N5 system degradation is here reported. The oxidation treatments were carried out from 900 (mostly θ-Al2O3 growing conditions) to 1200°C (mainly α-Al2O3 growing conditions) for 5 h, under a purified Ar-stream with a fixed pO2= 1 x 10-5 atm. Results are discussed based on the correlation between the structural, micros…
▽ More
The effect of isothermal pre-oxidation treatments on the \b{eta}-(Ni,Pt)Al + René N5 system degradation is here reported. The oxidation treatments were carried out from 900 (mostly θ-Al2O3 growing conditions) to 1200°C (mainly α-Al2O3 growing conditions) for 5 h, under a purified Ar-stream with a fixed pO2= 1 x 10-5 atm. Results are discussed based on the correlation between the structural, microstructural and chemical properties of the \b{eta}-(Ni,Pt)Al BC showing that pre-oxidation parameters have an important effect on the multi-elemental counter diffusion phenomena along BC. For instance, a significant BC+IDZ thickness increase of 55% at 1200 °C was observed with respect to as-received sample just after 5 h of oxidation resulting in a severe BC degradation.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Effect of Graded Bias Voltage on the Microstructure of arc-PVD CrN Films and its Response in Electrochemical & Mechanical Behavior
Authors:
M. L. Cedeño-Venté,
D. G. Espinosa-Arbeláez,
J. Manríquez-Rocha,
G. C. Mondragón-Rodríguez,
A. E. Gómez-Ovalle,
J. González-Hernández,
J. M. Alvarado-Orozco
Abstract:
The effect of graded or constant bias voltages (-40 V, -80 V and -40/60/80 V) on size grain and surface defects of arc PVD deposited CrN films was investigated. Corrosion resistance evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic curves (Tafel) and the mechanical behavior evaluated by means of instrumented nanoindentation and scratch testing was correlated with the…
▽ More
The effect of graded or constant bias voltages (-40 V, -80 V and -40/60/80 V) on size grain and surface defects of arc PVD deposited CrN films was investigated. Corrosion resistance evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic curves (Tafel) and the mechanical behavior evaluated by means of instrumented nanoindentation and scratch testing was correlated with the microstructural changes. It was found that the bias voltage variation affects corrosion behavior due to the presence of defects (i.e. open voids, droplets) which also affects the failure mechanisms and increasing spallation. High bias voltage (-80 V) increases nano-hardness and the elastic modulus due to the dense microstructure of the CrN coating.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Plasma-assisted nitriding of M2 tool steel: An experimental and theoretical approach
Authors:
J. M. Gonzalez-Carmona,
G. C. Mondragon-Rodriguez,
J. E. Galvan-Chaire,
A. E. Gomez-Ovalle,
L. A. Caceres-Diaz,
J. Gonzalez-Hernandez,
J. M. Alvarado-Orozco
Abstract:
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers, and adhesion) of AISI M2 tool steel. Mechanically effective compound (4 to 17.6 um) and diffusion layers (50.8 to 82.4 um) were obtained. Plasma nitriding considerably improved Surface engineering has been recognized a…
▽ More
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers, and adhesion) of AISI M2 tool steel. Mechanically effective compound (4 to 17.6 um) and diffusion layers (50.8 to 82.4 um) were obtained. Plasma nitriding considerably improved Surface engineering has been recognized as a family of technologies used to modify or improve the surface properties of a substrate. Nano-hardness, E-moduli and resistance to scratch of AISI M2 steel. Surface properties enhancement was associated to two harmonious effects at the nano-scale resulted by (a) stable nitride phases formation such as: gamma-Fe4N, epsilon-Fe2,3N, and (b) no brittle nitride networks and no critical decarburization of the steel upon nitriding. Thermodynamic calculations are in agreement with the experimental findings.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Theoretical-Experimental failure analysis of the c-Al0.66Ti0.33N-M2 steel system using nanoindentation instrumented and finite element analysis
Authors:
A. E. Gómez-Ovalle,
M. Torres,
J. M. Alvarado-Orozco,
S. M. A. Jimenez,
D. G. Espinosa-Arbelaez,
J. M. Gonzalez-Carmona,
J. Zárate-Medina,
J. González-Hernández,
G. C. Mondragón-Rodríguez
Abstract:
A theoretical-experimental methodology for failure analysis of the c-Al0.66Ti0.33N / Interface / M2 steel coating system is proposed here. This c-Al0.66Ti0.33N coating was deposited by the arc-PVD technique. For coating modeling the traction-separation law and the extended finite element method-XFEM were applied, the cohesive zones model was used for interface modeling and the Ramberg-Osgood law f…
▽ More
A theoretical-experimental methodology for failure analysis of the c-Al0.66Ti0.33N / Interface / M2 steel coating system is proposed here. This c-Al0.66Ti0.33N coating was deposited by the arc-PVD technique. For coating modeling the traction-separation law and the extended finite element method-XFEM were applied, the cohesive zones model was used for interface modeling and the Ramberg-Osgood law for substrate modeling. Experimental values using the instrumented nanoindentation technique, the scratch test and tensile stress test were obtained and introduced into the model. By means of nanoindentation the elastic modulus of coating, the fracture energy release rate and the nano-hardness. Normal and shear stress values of the interface were obtained with the scratch test, at the adhesive and cohesive critical loads. Vickers indentation was used to generate cracking patterns in the c-Al0.66Ti0.33N / Interface / M2 steel coating system. Radial and lateral cracks were generated and analyzed after transversal FIB cuts of the fracture zones. A finite element analysis was carried out to understand the relationship between the load-displacement curve and mechanical failure of in the system, associating the pop-in with nucleation, crack growth and cracking pattern. This works present a theoretical-experimental methodology for failure analysis of hard coatings (monolithic body) allowing to calculate fracture toughness of the coating material and model cracking patterns caused by contact mechanics.
△ Less
Submitted 13 October, 2018;
originally announced October 2018.
-
Phase stability and elastic properties in the $Al_{1-x-y}Cr_{x}Ti_{y}N$ system from first principles
Authors:
Erik Gutiérrez-Valladares,
Rurick Santos-Fragoso,
Guillermo Vázquez-Tovar,
Andrés Manuel Garay-Tapia,
Diego Germán Espinosa-Arbeláez,
Raymundo Arróyave,
Jesús González-Hernández,
Juan Manuel Alvarado-Orozco
Abstract:
Multicomponent nitrides are a hot research topic in the search of hard coatings. The effect of substitutions on the phase stabilities, magnetic, and elastic properties of $Al_{1-x-y}Cr_{x}Ti_{y}N$ $(0\leq x,y\leq1)$ was studied using first principles calculations based on the density functional theory. These calculations provide the lattice parameter, formation energy, mixing enthalpy and elastic…
▽ More
Multicomponent nitrides are a hot research topic in the search of hard coatings. The effect of substitutions on the phase stabilities, magnetic, and elastic properties of $Al_{1-x-y}Cr_{x}Ti_{y}N$ $(0\leq x,y\leq1)$ was studied using first principles calculations based on the density functional theory. These calculations provide the lattice parameter, formation energy, mixing enthalpy and elastic constants. The calculated values are in good agreement with experiments and compare well with other theoretical results. A magnetic transition from antiferromagnetic to ferromagnetic state occurs at concentrations of B1-TiN higher than 60$\%$. The quaternary zone has a lower aluminum solubility than the constituent ternary systems. The Poisson's ratio, Shear and Young modulus were used as predictors of the hardness, indicating that the higher hardness values are found on the transition line from B1 to B4. The obtained results enable the design of new $Al_{1-x-y}Cr_{x}Ti_{y}N$-based materials for coating applications.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Diamond-Like Carbon Coatings on Plasma Nitrided M2 Steel: effect of deposition parameters on adhesion properties
Authors:
A. Moreno-Barcenas,
J. M Alvarado-Orozco,
J. M. Gonzalez Carmona,
G. C. Mondragon-Rodriguez,
J. Gonzalez-Hernandez,
A. Garcia-Garcia
Abstract:
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further improvements are needed and substrate pre-treatment plays an important role in supporting and enforcing the adhesion and service performance of the DLC coatings. In t…
▽ More
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further improvements are needed and substrate pre-treatment plays an important role in supporting and enforcing the adhesion and service performance of the DLC coatings. In this work, the synergetic effect of low-pressure arc plasma-assisted-nitriding (PAN) treatment of M2 steel and plasma-enhanced chemical vapor deposition (PECVD) on the DLC coatings adhesion was analyzed. Adhesion strength of a duplex DLC + nitriding coating system was compared to the performance of DLC-coatings applied on non-nitrided M2 steel substrates. The nitrided layer was analyzed by optical microscopy, X-ray diffraction, Vickers microhardness and atomic force microscopy. DLC coatings were analyzed using Raman spectroscopy revealing that DLC a-C:H type was obtained. The adhesion properties were analyzed by scratch testing supported by optical microscopy and Scanning Electron Microscope. Results showed an improvement of the DLC adhesion on the plasma nitrided surfaces.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Effect of thermal treatments in high purity Ar on the oxidation behavior of arc-PVD c-Al0.66Ti0.33N coatings
Authors:
G. C. Mondragon Rodriguez,
Y. Chipatecua-Godoy,
N. Camacho,
D. G. Espinosa-Arbelaez,
J. Gonzalez-Hernandez,
J. M. Alvarado-Orozco
Abstract:
The effect of temperature in high purity Ar (low oxygen partial pressure) on the oxidation and crystal phase evolution of c-Al0.66Ti0.33N arc-PVD coatings was investigated. High temperature tribology in Ar jet and adhesion behavior of the oxidized coating were addressed. The use of Ar protects the coating from the oxidation reactions and allowed to shed light into the details and paths of the nitr…
▽ More
The effect of temperature in high purity Ar (low oxygen partial pressure) on the oxidation and crystal phase evolution of c-Al0.66Ti0.33N arc-PVD coatings was investigated. High temperature tribology in Ar jet and adhesion behavior of the oxidized coating were addressed. The use of Ar protects the coating from the oxidation reactions and allowed to shed light into the details and paths of the nitride oxidation process. The c-Al0.66Ti0.33N nitrides were slightly oxidized in Ar even at high temperature. The surface chemistry evaluation shows very thin Al- and Ti-based oxide layers formation after 700C in Ar. However, the onset formation of the rutile TiO2 oxide was detected only after 900C and was clearly found by low-angle XRD diffraction after 1000C. XPS analysis of the oxidized samples at 800C indicated the formation of extremely thin layers mainly composed of mixed oxides a-Al2O3 g-Al2O3 and r-TiO2. Gradual changes in the chemical composition of the oxidized coatings observed at 900C clearly demonstrate the formation of gradient boundaries between Al-rich and Ti-rich oxy-nitride layers. After 1000C at least four oxides and oxi-nitrides layers and interlayers were found. Additionally, it is suspected that the transition oxide phases such as c-TiO, c-Al0.54Ti2.46O0.28N4.58, alpha-Al2TiO5 and TiOxNy might be precursors leading to the formation of thermodynamically stable rutile and alumina phases. Surface inspection after high temperature tribology in Ar jet showed formation of tensile cracks in the wear tracks and wear processes due to high size particle adhesion-abrasion and low size particle micro-ploughing of hard nitrides, oxi-nitrides and brittle oxide particles. Adhesion tests performed after high temperature tribology in Ar showed critical load decrease related to cohesive and adhesive damages at the contact point of the scratch track.
△ Less
Submitted 25 January, 2019; v1 submitted 11 October, 2018;
originally announced October 2018.
