Showing 1–50 of 56 results for author: Gomez, J

Structural, magnetic, and nanoacoustic characterization of Co/Pt superlattices

Authors: E. R. Cardozo de Oliveira, C. Xiang, C. Borrazás, S. Sandeep, J. E. Gómez, M. Vásquez Mansilla, N. Findling, L. Largeau, N. D. Lanzillotti-Kimura, M. Granada

Abstract: Superlattices presenting a spatial modulation of the elastic properties appear as a main tool to reach the THz regime in nanoacoustic devices. The exploration of alternative materials with multifunctional properties remains a fertile domain of research. In this work, we study the structural, magnetic, and acoustic characteristics of nanometric superlattices made of Pt/Co. The samples present a w… ▽ More Superlattices presenting a spatial modulation of the elastic properties appear as a main tool to reach the THz regime in nanoacoustic devices. The exploration of alternative materials with multifunctional properties remains a fertile domain of research. In this work, we study the structural, magnetic, and acoustic characteristics of nanometric superlattices made of Pt/Co. The samples present a well defined periodicity, as determined by X-ray reflectometry, whereas scanning transmission electron microscopy with local compositional analysis reveals that the superlattices present a modulation in composition instead of sharp interfaces. The policrystalline nature of the superlattices is evidenced both by X ray diffraction and transmission electron microscopy. Magnetization measurements show a perpendicular magnetic anisotropy for the higher Co concentrations. Picosecond acoustic experiments evidence that the studied samples support short-lived acoustic modes up to 900 GHz, and up to 7 acoustic echoes at lower frequencies.These are promising results for the development of magnetoacoustic devices working at ultrahigh frequencies. △ Less

Submitted 25 May, 2025; originally announced May 2025.

Comments: 21 pages, 8 figures, 1 table

Strain-Induced Enhancement of Spin Pumping in Pt/YIG Bilayers

Authors: Lara M. Solis, Santiago J. Carreira, Javier Gómez, Alejandro Butera, María Abellán, Carlos García, Fernando Bonetto, Paolo Vavassori, Javier Briático, Laura B. Steren, Myriam H. Aguirre

Abstract: Enhancing spin-to-charge (S$\rightarrow$C) conversion efficiency remains a key challenge in spintronic materials research. In this work we investigate the effect of substrate-induced strains onto the S$\rightarrow$C efficiency. On one hand, we analyze strains-induced magnetic anisotropies in yttrium iron garnet (Y$_3$Fe$_5$O$_{12}$, YIG) by comparing the magnetic and structural properties of YIG f… ▽ More Enhancing spin-to-charge (S$\rightarrow$C) conversion efficiency remains a key challenge in spintronic materials research. In this work we investigate the effect of substrate-induced strains onto the S$\rightarrow$C efficiency. On one hand, we analyze strains-induced magnetic anisotropies in yttrium iron garnet (Y$_3$Fe$_5$O$_{12}$, YIG) by comparing the magnetic and structural properties of YIG films grown on Gd$_3$Ga$_5$O$_{12}$ (GGG) and (CaGd)$_3$(MgZrGa)$_5$O$_{12}$ (SGGG) substrates. Differences in lattice mismatch - YIG//GGG ($η= -0.06 \%$) and YIG//SGGG ($η= -0.83 \%$) - lead to out-of-plane tensile strains in the first case and unexpected compressive strain in the latter. On the other hand, we study the spin injection efficiency on Pt/YIG bilayers evaluated by the Inverse Spin Hall Effect (ISHE). We find that the resulting perpendicular magnetic anisotropy in YIG//SGGG, while not dominant over shape anisotropy, correlates with enhanced ISHE signals as observed in Spin Pumping Ferromagnetic Resonance (SP-FMR) and Spin Seebeck effect (SSE) experiments. Strain engineering proves effective in enhancing spin-to-charge conversion, providing insight into the design of efficient spintronic devices. △ Less

Submitted 22 April, 2025; originally announced April 2025.

Magnetization process in epitaxial Fe$_{85}$Co$_{15}$ thin films via anisotropic magnetoresistance

Authors: L. Saba, J. E. Gómez, D. J. Pérez-Morelo, S. Anguiano, D. Velázquez Rodriguez, A. Butera, M. Granada, L. Avilés-Félix

Abstract: The effects of the crystalline symmetry on the magnetotransport properties in ferromagnetic alloys are being reexamined in recent years particularly due to the role of the anisotropic magnetoresistance on the electrical detection of magnetization dynamics, which is relevant to estimate spin transport parameters such as the spin Hall angle or the damping constant. In this work we investigated the c… ▽ More The effects of the crystalline symmetry on the magnetotransport properties in ferromagnetic alloys are being reexamined in recent years particularly due to the role of the anisotropic magnetoresistance on the electrical detection of magnetization dynamics, which is relevant to estimate spin transport parameters such as the spin Hall angle or the damping constant. In this work we investigated the crystalline dependent anisotropic magnetoresistance in epitaxial Fe85Co15 films and discuss the magnetization process through the magnetotransport properties by varying the relative orientations between the electric current, the external magnetic field and the Fe85Co15 crystallographic directions. We have found that the anisotropic magnetoresistance ratio depends on the current direction with respect to the crystal axes of Fe85Co15 and determine a ratio of 0.20 % and 0.17 % when the current is applied along the [110] hard and [100] easy axes, respectively. We fit our experimental data using the Stoner-Wohlfarth model to describe the path followed by the magnetization during the magnetization process and to extract the anisotropy constants. The fitted cubic and uniaxial anisotropy constants are Kc = 21 kJ/m3 and Ku = 11 kJ/m3, which are comparable with reported values from the angular variation of ferromagnetic resonance experiments. Our results contribute to the understanding of the interplay between the crystalline structure and the magnetotransport properties of FeCo alloys. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Inferring High-Order Couplings with Neural Networks

Authors: Aurélien Decelle, Alfonso de Jesús Navas Gómez, Beatriz Seoane

Abstract: Maximum entropy methods, based on the inverse Ising/Potts problem from statistical mechanics, are essential for modeling interactions between pairs of variables in data-driven problems across disciplines such as bioinformatics, ecology, and neuroscience. Despite their considerable success, these methods typically fail to capture higher-order interactions that are often essential for understanding… ▽ More Maximum entropy methods, based on the inverse Ising/Potts problem from statistical mechanics, are essential for modeling interactions between pairs of variables in data-driven problems across disciplines such as bioinformatics, ecology, and neuroscience. Despite their considerable success, these methods typically fail to capture higher-order interactions that are often essential for understanding complex systems. Conversely, modern machine learning methods capture these complex interactions, but the computational cost of interpretable frameworks makes them impractical for real-world applications. Restricted Boltzmann Machines (RBMs) provide a computationally efficient way to capture statistical correlations using hidden nodes in a bipartite neural network. In this study, we introduce a new method that maps RBMs to generalized Potts models, allowing for the extraction of interactions up to any specified order. This method utilizes large-$N$ approximations, enabled by the RBM's simple structure, to extract effective many-body couplings with minimal computational effort. Furthermore, we propose a robust framework for extracting higher-order interactions in more complex probabilistic models and a simple gauge-fixing method within the effective many-body Potts model. Our validation on synthetic datasets confirms the method's ability to recover two- and three-body interactions accurately. When applied to protein sequence data, the framework competently reconstructs protein contact maps and provides performance comparable to the best inverse Potts models. These findings confirm that RBMs are an effective and streamlined tool for exploring higher-order interactions within complex systems. △ Less

Submitted 10 February, 2025; v1 submitted 10 January, 2025; originally announced January 2025.

Comments: 16 Pages and 5 Figures

Magnetization reversal and direct observation of magnetic domains on FePt thin films

Authors: Augusto Roman, Javier Gomez, Alejandro Butera, Paolo Vavassori, Laura B. Steren

Abstract: In ferromagnetic thin films, the presence of an out-of-plane component of the magnetic anisotropy may induce a transition from planar to stripe-like magnetic domains above a critical thickness, $t_c$. Because of the changes in the domain structure, important changes in the magnetization reversal mechanisms are observed. We present the analysis of the magnetization reversal in FePt thin films, wher… ▽ More In ferromagnetic thin films, the presence of an out-of-plane component of the magnetic anisotropy may induce a transition from planar to stripe-like magnetic domains above a critical thickness, $t_c$. Because of the changes in the domain structure, important changes in the magnetization reversal mechanisms are observed. We present the analysis of the magnetization reversal in FePt thin films, where this phenomenon is observed, through the experimental observation of magnetic domains by magneto-optic Kerr effect microscopy. The observed reversal mechanisms are strongly dependent on the thickness of the sample. For $t<t_c$, the reversal process is a combination of domain wall movement and rotation of domains. Meanwhile, for $t>t_c$, the stripe-domain structure determines the magnetization reversal. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Journal ref: IEEE Transactions on Magnetics ( Volume: 60, Issue: 9, September 2024)

Self-induced spin pumping and inverse spin Hall effect in single FePt thin films

Authors: J. L. Ampuero, A. Anadón, H. Damas, J. Ghanbaja, S. Petit-Watelot, J. -C. Rojas-Sánchez, D. Velázquez Rodriguez, J. E. Gómez, A. Butera, L. Avilés-Félix

Abstract: In this study, we investigate the spin-charge current conversion characteristics of chemically disordered ferromagnetic single FePt thin films by spin-pumping ferromagnetic resonance experiments performed on both a resonance cavity and on patterned devices. We clearly observe a self-induced signal in a single FePt layer. The sign of a single FePt spin pumping voltage signal is consistent with a ty… ▽ More In this study, we investigate the spin-charge current conversion characteristics of chemically disordered ferromagnetic single FePt thin films by spin-pumping ferromagnetic resonance experiments performed on both a resonance cavity and on patterned devices. We clearly observe a self-induced signal in a single FePt layer. The sign of a single FePt spin pumping voltage signal is consistent with a typical bilayer with a positive spin Hall angle layer such as that of Pt on top of a ferromagnet (FM), substrate//FM/Pt. Structural analysis shows a strong composition gradient due to natural oxidation at both FePt interfaces, with the Si substrate and with the air. The FePt-thickness dependence of the self-induced charge current produced allowed us to obtain $λ_ \text{FePt}=(1.5\pm 0.1)$ nm and self-induced $θ_ \text{self-FePt}=0.047 \pm 0.003$, with efficiency for reciprocal effects applications $θ_ \text{self-FePt} \times λ_ \text{FePt} = 0.071$ nm which is comparable to that of Pt, $θ_ \text{SH-Pt} \times λ_ \text{Pt} = 0.2$ nm. Moreover, by studying bilayer systems such as Si//FePt/Pt and Si//Pt//FePt we independently could extract the individual contributions of the external inverse spin Hall effect of Pt and the self-induced inverse spin Hall effect of FePt. Notably, this method gives consistent values of charge currents produced due to only self-induced inverse spin Hall effect in FePt layers. These results advance our understanding of spin-to-charge interconversion mechanisms in composite thin films and pave the way for the development of next-generation spintronics devices based on self-torque. △ Less

Submitted 9 February, 2025; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 13 pages, 7 figures

Evidence for charge mediated coupling in Fe-Ga/PMN-PT composite multiferroic

Authors: M. Tortarolo, D. Goijman, M. A. Barral, S. Di Napoli, A. A. Pérez Martínez, G. Ramírez, A. Sarmiento, J. Gómez, A. Zakharova, S. E. Bayram, F. Stramaglia, C. A. F. Vaz, J. Milano, C. Piamonteze

Abstract: We present an experimental study of the magnetoelectric coupling (MEC) in the Fe-Ga/PMN-PT thin film multiferroic composite by means of x-ray magnetic circular dichroism (XMCD) and ferromagnetic resonance (FMR). Our measurements show evidence for a charge mediated coupling mechanism, suggested by the asymmetric magnetic remanence (M$_{rem}$) behaviour under opposite electric fields ($\pm$ E) and t… ▽ More We present an experimental study of the magnetoelectric coupling (MEC) in the Fe-Ga/PMN-PT thin film multiferroic composite by means of x-ray magnetic circular dichroism (XMCD) and ferromagnetic resonance (FMR). Our measurements show evidence for a charge mediated coupling mechanism, suggested by the asymmetric magnetic remanence (M$_{rem}$) behaviour under opposite electric fields ($\pm$ E) and the asymmetric resonance field (H$_r$) in the FMR measurements. Also, the FMR measurements reveal a perpendicular magnetic anisotropy (PMA), that can be related to an interface charge effect. and it is tunable by E field. Ab initio calculations support the existence of a charge mediated coupling at the Fe-Ga/PMN-PT interface. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: 7 pages, 5 figures, Supplemental Material

Journal ref: J. Appl. Phys. 137, 014101 (2025)

Inferring effective couplings with Restricted Boltzmann Machines

Authors: Aurélien Decelle, Cyril Furtlehner, Alfonso De Jesus Navas Gómez, Beatriz Seoane

Abstract: Generative models offer a direct way of modeling complex data. Energy-based models attempt to encode the statistical correlations observed in the data at the level of the Boltzmann weight associated with an energy function in the form of a neural network. We address here the challenge of understanding the physical interpretation of such models. In this study, we propose a simple solution by implem… ▽ More Generative models offer a direct way of modeling complex data. Energy-based models attempt to encode the statistical correlations observed in the data at the level of the Boltzmann weight associated with an energy function in the form of a neural network. We address here the challenge of understanding the physical interpretation of such models. In this study, we propose a simple solution by implementing a direct mapping between the Restricted Boltzmann Machine and an effective Ising spin Hamiltonian. This mapping includes interactions of all possible orders, going beyond the conventional pairwise interactions typically considered in the inverse Ising (or Boltzmann Machine) approach, and allowing the description of complex datasets. Earlier works attempted to achieve this goal, but the proposed mappings were inaccurate for inference applications, did not properly treat the complexity of the problem, or did not provide precise prescriptions for practical application. To validate our method, we performed several controlled inverse numerical experiments in which we trained the RBMs using equilibrium samples of predefined models with local external fields, 2-body and 3-body interactions in different sparse topologies. The results demonstrate the effectiveness of our proposed approach in learning the correct interaction network and pave the way for its application in modeling interesting binary variable datasets. We also evaluate the quality of the inferred model based on different training methods. △ Less

Submitted 24 January, 2024; v1 submitted 5 September, 2023; originally announced September 2023.

Comments: 17 figures, 39 pages

Journal ref: SciPost Phys. 16, 095 (2024)

Plasma induced surface modification of sapphire and its influence on graphene grown by PECVD

Authors: Miguel Sinusia Lozano, Ignacio Bernat-Montoya, Todora Ivanova Angelova, Alberto Boscá Mojena, Francisco J. Díaz-Fernández, Miroslavna Kovylina, Alejandro Martínez, Elena Pinilla Cienfuegos, Víctor J. Gómez

Abstract: The catalyst-free synthesis of graphene on dielectrics prevents the damage induced by the transfer process. Although challenging, to master this synthesis would boost the integration of graphene on consumer electronics since defects hinder its optoelectronic properties. In this work, the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via… ▽ More The catalyst-free synthesis of graphene on dielectrics prevents the damage induced by the transfer process. Although challenging, to master this synthesis would boost the integration of graphene on consumer electronics since defects hinder its optoelectronic properties. In this work, the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via plasma-enhanced chemical vapour deposition (PECVD) is studied. The different terminations of the sapphire surface are controlled by a plasma etching process. A design of experiments (DoE) procedure was carried out to evaluate the major effects governing the etching process of four different parameters: i.e. discharge power, time, pressure and gas employed. In the characterization of the substrate, two sapphire surface terminations were identified and characterized by means of contact angle measurements, being a hydrophilic (hydrophobic) surface the fingerprint of an Al- (OH-) terminated surface, respectively. The defects within the synthesized graphene were analysed by Raman spectroscopy. Notably, we found that the ID/IG ratio decreases for graphene grown on OH-terminated surfaces. Furthermore, two different regimes related to the nature of graphene defects were identified and depending on the sapphire terminated surface are bound either to vacancy or boundary like defects. Finally, studying the density of defects and the crystallite area, as well as their relationship with the sapphire surface termination paves the way for increasing the crystallinity of the synthesized graphene. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 27 pages, 6 figures

Magnetization reversal in FePt thin films: Experiments and simulations

Authors: Augusto Román, Agustín Lopez Pedroso, Karim Bouzehouane, Javier Enrique Gómez, Alejandro Butera, Myriam Haydee Aguirre, Marcio Soares Medeiros, Carlos Garcia, Laura Beatriz Steren

Abstract: The competition between shape and perpendicular magnetic anisotropies (PMA) in magnetic thin films gives rise to unusual magnetic behaviors. In ferromagnetic films with moderate PMA the magnetic domain configuration transitions from planar to stripe-like domains above a critical thickness, $t_c$. In this article, we present a detailed study of the magnetization switching mechanism in FePt thin fil… ▽ More The competition between shape and perpendicular magnetic anisotropies (PMA) in magnetic thin films gives rise to unusual magnetic behaviors. In ferromagnetic films with moderate PMA the magnetic domain configuration transitions from planar to stripe-like domains above a critical thickness, $t_c$. In this article, we present a detailed study of the magnetization switching mechanism in FePt thin films, where this phenomenon is observed. Using micromagnetic simulations and experiments, we found that below $t_c$ the reversal mechanism is well described by the two-phase model while above this thickness the magnetization within each stripe reverses by coherent rotation. We also analyzed the PMA and its temperature dependence, probing that substrate-induced strains are responsible for the abnormal coercive field behavior observed for FePt films with $t>t_c$. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Comments: 7 pages, 13 figures

Report number: A01

Computational Determination of the Electronic Structure for different Graphene Quantum Dot geometries

Authors: Alexander Leon, Juan E. Gomez, Freddy R. Perez

Abstract: The interaction between carbon nanostructures like quantum dots and radiation can generate different effects inside the nanomaterial, with the use of computational methods such effects can be predicted and optimize the material allowing a desired output. In this work, a theoretical model for pristine graphene quantum dots is studied, allowing to explain the shape and size dependence for the electr… ▽ More The interaction between carbon nanostructures like quantum dots and radiation can generate different effects inside the nanomaterial, with the use of computational methods such effects can be predicted and optimize the material allowing a desired output. In this work, a theoretical model for pristine graphene quantum dots is studied, allowing to explain the shape and size dependence for the electronic properties and how the bandgap can be tuned with the functionalization of the nanostructure at the edges. △ Less

Submitted 6 May, 2022; originally announced May 2022.

Comments: 10 pages, 10 figures

Analysis of the directionality on periodic materials

Authors: Nicolás Guarín-Zapata, Camilo Valencia, Juan Gómez

Abstract: There is an increasing interest in the study of metamaterials and periodic materials across disciplines. These are anisotropic and their properties present directionality. For example, the wave speed depends on the propagation direction. Furthermore, they are heterogeneous, and their directionality depends on their spectra. Common approaches to describe anisotropy have been used in the large-wavel… ▽ More There is an increasing interest in the study of metamaterials and periodic materials across disciplines. These are anisotropic and their properties present directionality. For example, the wave speed depends on the propagation direction. Furthermore, they are heterogeneous, and their directionality depends on their spectra. Common approaches to describe anisotropy have been used in the large-wavelength approximation corresponding to static properties. Here we present an anisotropy measure based on the dynamic behavior. It receives dispersion surfaces from Bloch analyses and outputs a curve/surface with bulk directionality encoded on it. We present results for elastodynamics, but it is applicable to other phenomena. △ Less

Submitted 3 July, 2023; v1 submitted 20 September, 2021; originally announced September 2021.

Comments: 22 pages, 15 figures. Mechanics of Advanced Materials and Structures (2023)

MSC Class: 74J05; 74S05; 78A48;

Variational principles and finite element Bloch analysis in couple stress elastodynamics

Authors: Nicolás Guarín-Zapata, Juan Gomez, Ali Reza Hadjesfandiari, Gary F. Dargush

Abstract: We address the numerical simulation of periodic solids (phononic crystals) within the framework of couple stress elasticity. The additional terms in the elastic potential energy lead to dispersive behavior in shear waves, even in the absence of material periodicity. To study the bulk waves in these materials, we establish an action principle in the frequency domain and present a finite element for… ▽ More We address the numerical simulation of periodic solids (phononic crystals) within the framework of couple stress elasticity. The additional terms in the elastic potential energy lead to dispersive behavior in shear waves, even in the absence of material periodicity. To study the bulk waves in these materials, we establish an action principle in the frequency domain and present a finite element formulation for the wave propagation problem related to couple stress theory subject to an extended set of Bloch-periodic boundary conditions. A major difference from the traditional finite element formulation for phononic crystals is the appearance of higher-order derivatives. We solve this problem with the use of a Lagrange-multiplier approach. After presenting the variational principle and general finite element treatment, we particularize it to the problem of finding dispersion relations in elastic bodies with periodic material properties. The resulting implementation is used to determine the dispersion curves for homogeneous and porous couple stress solids, in which the latter is found to exhibit an interesting bandgap structure. △ Less

Submitted 15 June, 2021; originally announced June 2021.

Comments: 29 pages, 8 figures

MSC Class: 74J05; 74S05 ACM Class: J.2

Journal ref: Wave Motion, 106, 102809 (2021)

Ultrafast Measurements of the Interfacial Spin Seebeck Effect in Au and Rare-Earth Iron Garnet Bilayers

Authors: Victor H. Ortiz, Michael J. Gomez, Yawen Liu, Mohammed Aldosary, Jing Shi, Richard B. Wilson

Abstract: We investigate picosecond spin-currents across Au/iron-garnet interfaces in response to ultrafast laser heating of the electrons in the Au film. In the picoseconds after optical heating, interfacial spin currents occur due to an interfacial temperature difference between electrons in the metal and magnons in the insulator. We report measurements of this interfacial longitudinal spin Seebeck effect… ▽ More We investigate picosecond spin-currents across Au/iron-garnet interfaces in response to ultrafast laser heating of the electrons in the Au film. In the picoseconds after optical heating, interfacial spin currents occur due to an interfacial temperature difference between electrons in the metal and magnons in the insulator. We report measurements of this interfacial longitudinal spin Seebeck effect between Au and rare-earth iron-garnet insulators, i.e. RE$_3$ Fe$_5$O$_{12}$, where RE is Y, Eu, Tb, Tm. We use time domain thermoreflectance (TDTR) measurements to characterize the thermal response of the bilayer to ultrafast optical heating. We use time-resolved magneto-optic Kerr effect (TR-MOKE) measurements of the Au layer to measure the time-evolution of spin accumulation in the Au film. We observe a spin Seebeck effect between Au/TmIG that is three times larger than for an Au/YIG bilayer. The interfacial thermal conductance between electrons in the Au and magnons in the TmIG layer is ~ 3 $\frac{MW}{m^2 K}$. △ Less

Submitted 15 August, 2021; v1 submitted 11 April, 2021; originally announced April 2021.

Journal ref: Phys. Rev. Materials 5, 074401 (2021)

Absence of moment fragmentation in the mixed $B$-site pyrochlore Nd$_{2}$GaSbO$_{7}$

Authors: S. J. Gomez, P. M. Sarte, M. Zelensky, A. M. Hallas, B. A. Gonzalez, K. H. Hong, E. J. Pace, S. Calder, M. B. Stone, Y. Su, E. Feng, M. D. Le, C. Stock, J. P. Attfield, S. D. Wilson, C. R. Wiebe, A. A. Aczel

Abstract: Nd-based pyrochlore oxides of the form Nd$_{2}B_{2}$O$_{7}$ have garnered a significant amount of interest owing to the moment fragmentation physics observed in Nd$_{2}$Zr$_{2}$O$_{7}$ and speculated in Nd$_{2}$Hf$_{2}$O$_{7}$. Notably this phenomenon is not ubiquitous in this family, as it is absent in Nd$_{2}$Sn$_{2}$O$_{7}$, which features a smaller ionic radius on the $B$-site. Here, we explor… ▽ More Nd-based pyrochlore oxides of the form Nd$_{2}B_{2}$O$_{7}$ have garnered a significant amount of interest owing to the moment fragmentation physics observed in Nd$_{2}$Zr$_{2}$O$_{7}$ and speculated in Nd$_{2}$Hf$_{2}$O$_{7}$. Notably this phenomenon is not ubiquitous in this family, as it is absent in Nd$_{2}$Sn$_{2}$O$_{7}$, which features a smaller ionic radius on the $B$-site. Here, we explore the necessary conditions for moment fragmentation in the Nd pyrochlore family through a detailed study of the mixed $B$-site pyrochlore Nd$_{2}$GaSbO$_{7}$. The $B$-site of this system is characterized by significant disorder and an extremely small average ionic radius. Similarly to Nd$_{2}$Sn$_{2}$O$_{7}$, we find no evidence for moment fragmentation through our bulk characterization and neutron scattering experiments, indicating that chemical pressure (and not necessarily the $B$-site disorder) plays a key role in the presence or absence of this phenomenon in this material family. Surprisingly, the presence of significant $B$-site disorder in Nd$_{2}$GaSbO$_{7}$ does not generate a spin glass ground state and instead the same all-in-all-out magnetic order identified in other Nd pyrochlores is found here. △ Less

Submitted 1 April, 2021; originally announced April 2021.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. B 103, 214419 (2021)

The effect of nitriding on the humidity sensing properties of hydrogenated amorphous carbon films

Authors: Giuliano Frattini, Sindry Torres, Leonel I Silva, Carlos E Repetto, Bernardo J Gómez, Ariel Dobry

Abstract: We have studied the effect of nitriding on the humidity sensing properties of hydrogenated amorphous carbon (a-C:H) films. The films were prepared in two stages combining the techniques of physical deposition in vapor phase evaporation (PAPVD) and plasma pulsed nitriding. By deconvolution of the Raman spectrum we identified two peaks corresponding to the D and G modes characteristic of a-C:H. Afte… ▽ More We have studied the effect of nitriding on the humidity sensing properties of hydrogenated amorphous carbon (a-C:H) films. The films were prepared in two stages combining the techniques of physical deposition in vapor phase evaporation (PAPVD) and plasma pulsed nitriding. By deconvolution of the Raman spectrum we identified two peaks corresponding to the D and G modes characteristic of a-C:H. After the N$_2$-H$_2$ plasma treating, the peaks narrowed and shifted to the right, which we associated with the incorporation of N into the structure. We compared the sensitivity to the relative humidity (RH) of the films before and after the N$_2$-H$_2$ plasma treatment. The nitriding improved the humidity sensitivity measured as the low frequency resistance. By impedance spectroscopy we studied the frequency dependence of the AC conductivity $σ$ at different RH conditions. Before nitriding $σ(ω)\sim A ω^s$, it seemed to have the universal behaviour seen in other amorphous systems. The humidity changed the overall scale $A$. After nitriding, the exponent $s$ increased, and became RH dependent. We associated this behaviour to the change of the interaction mechanism between the water molecule and the substrate when the samples were nitriding. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Comments: 11 pages, 7 figures

Boron Nitride and Oxide Supported on Dendritic Fibrous Nanosilica for Catalytic Oxidative Dehydrogenation of Propane

Authors: Rajesh Belgamwar, Andrew G. M. Rankin, Ayan Maity, Amit Kumar Mishra, Jennifer S. Gómez, Julien Trébosc, Chathakudath P. Vinod, Olivier Lafon, Vivek Polshettiwar

Abstract: In this work, we were able to significantly increase the activity of boron nitride catalysts used for the oxidative dehydrogenation (ODH) of propane by designing and synthesising boron nitride (BN) supported on dendritic fibrous nanosilica (DFNS). DFNS/BN showed a markedly increased catalytic efficiency, accompanied by exceptional stability and selectivity. Textural characterisation together with… ▽ More In this work, we were able to significantly increase the activity of boron nitride catalysts used for the oxidative dehydrogenation (ODH) of propane by designing and synthesising boron nitride (BN) supported on dendritic fibrous nanosilica (DFNS). DFNS/BN showed a markedly increased catalytic efficiency, accompanied by exceptional stability and selectivity. Textural characterisation together with solid-state NMR and X-ray photoelectron spectroscopic analyses indicate the presence of a combination of unique fibrous morphology of DFNS and various boron sites connected to silica to be the reason for this increase in the catalytic performance. Notably, DFNS/B${}_2$O${}_3$ also showed catalytic activity, although with more moderate selectivity compared to that of DFNS/BN. Solid-state NMR spectra indicates that the higher selectivity of DFNS/BN might stem from a larger amount of hydrogen-bonded hydroxyl groups attached to B atoms. This study indicates that both boron nitride and oxide are active catalysts and by using high surface area support (DFNS), conversion from propane to propene as well as productivity of olefins was significantly increased. △ Less

Submitted 2 November, 2020; originally announced November 2020.

Industrial manufacturing and characterization of multiscale CFRP laminates made from prepregs containing graphene-related materials

Authors: Veronica Rodriguez-Garcia, Julio Gomez, Francesco Cristiano, Maria R. Gude

Abstract: The introduction of graphene-related materials (GRMs) in carbon fibre-reinforced polymers (CFRP) has been proved to enhance their mechanical and electrical properties. However, methodologies to produce the 3-phase materials (multiscale composites) at an industrial scale and in an efficient manner are still lacking. In this paper, multiscale CFRP composites containing different GRMs have been manuf… ▽ More The introduction of graphene-related materials (GRMs) in carbon fibre-reinforced polymers (CFRP) has been proved to enhance their mechanical and electrical properties. However, methodologies to produce the 3-phase materials (multiscale composites) at an industrial scale and in an efficient manner are still lacking. In this paper, multiscale CFRP composites containing different GRMs have been manufactured following standard procedures currently used in the aerospace industry with the aim to evaluate its potential application. Graphite nanoplateletelets (GNPs), in situ exfoliated graphene oxide (GO) and reduced graphene oxide (rGO) have been dispersed into an epoxy resin to subsequently impregnate aeronautical grade carbon fibre tape. The resulting prepregs have been used for manufacturing laminates by hand lay-up and autoclave curing at 180 °C. Abroad characterization campaign has been carried out to understand the behaviour of the different multiscale laminates manufactured. The degree of cure, glass transition temperature and degradation temperature have been evaluated by thermal evolution techniques. Similarly, their mechanical properties (tensile, flexural, in-plane shear, interlaminar shear and mode I interlaminar fracture toughness) have been analysed together with their electrical conductivity. The manufacturing process resulted appropriated for producing three-phase laminates and their quality was as good as in conventional CFRPs. The addition ofGOand rGO resulted in an enhancement of the in-plane shear properties and delamination resistance while the addition ofGNPimproved the electrical conductivity. △ Less

Submitted 25 July, 2020; originally announced July 2020.

Journal ref: Materials Research Express 7 (2020) 075601

Impact of growth conditions on the domain nucleation and domain wall propagation in Pt/Co/Pt stacks

Authors: C. P. Quinteros, M. J. Cortes Burgos, L. J. Albornoz, J. Gomez, P. Granell, F. Golmar, M. L. Ibarra, S. Bustingorry, J. Curiale, M. Granada

Abstract: Understanding the effect of fabrication conditions on domain wall motion in thin films with perpendicular magnetization is a mandatory issue in order to tune their properties aiming to design spintronics devices based on such phenomenon. In this context, the present work intends to show how different growth conditions may affect domain wall motion in the prototypical system Pt/Co/Pt. The trilayers… ▽ More Understanding the effect of fabrication conditions on domain wall motion in thin films with perpendicular magnetization is a mandatory issue in order to tune their properties aiming to design spintronics devices based on such phenomenon. In this context, the present work intends to show how different growth conditions may affect domain wall motion in the prototypical system Pt/Co/Pt. The trilayers were deposited by dc sputtering, and the parameters varied in this study were the Co thickness, the substrate roughness, and the base pressure in the deposition chamber. Magneto-optical Kerr effect-based magnetometry and microscopy combined with X-ray reflectometry, atomic force microscopy, and transmission electron microscopy were adopted as experimental techniques. This permitted us to elucidate the impact on the hysteresis loops and on the domain wall dynamics, produced by different growth conditions. As other authors, we found that Co thickness is strongly determinant for both the coercive field and the domain wall velocity. On the contrary, the topographic roughness of the substrate and the base pressure of the deposition chamber evidence a selective impact on the nucleation of magnetic domains and on domain wall propagation, respectively, providing a tool to tune these properties. △ Less

Submitted 29 July, 2020; v1 submitted 7 January, 2020; originally announced January 2020.

Report number: Journal of Physics D: Applied Physics, Volume 54, Number 1

Journal ref: J. Phys. D: Appl. Phys. 54 015002 (2021)

Computational characterization of the wave propagation behaviour of multi-stable periodic cellular materials

Authors: Camilo Valencia, David Restrepo, Nilesh D. mankame, Pablo D. Zavattieri, Juan Gomez

Abstract: In this work, we present a computational analysis of the planar wave propagation behavior of a one-dimensional periodic multi-stable cellular material. Wave propagation in these materials is interesting because they combine the ability of periodic cellular materials to exhibit stop and pass bands with the ability to dissipate energy through cell-level elastic instabilities. Here, we use Bloch peri… ▽ More In this work, we present a computational analysis of the planar wave propagation behavior of a one-dimensional periodic multi-stable cellular material. Wave propagation in these materials is interesting because they combine the ability of periodic cellular materials to exhibit stop and pass bands with the ability to dissipate energy through cell-level elastic instabilities. Here, we use Bloch periodic boundary conditions to compute the dispersion curves and introduce a new approach for computing wide band directionality plots. Also, we deconstruct the wave propagation behavior of this material to identify the contributions from its various structural elements by progressively building the unit cell, structural element by element, from a simple, homogeneous, isotropic primitive. Direct integration time domain analyses of a representative volume element at a few salient frequencies in the stop and pass bands are used to confirm the existence of partial band gaps in the response of the cellular material. Insights gained from the above analyses are then used to explore modifications of the unit cell that allow the user to tune the band gaps in the response of the material. We show that this material behaves like a locally resonant material that exhibits low frequency band gaps for small amplitude planar waves. Moreover, modulating the geometry or material of the central bar in the unit cell provides a path to adjust the position of the band gaps in the material response. △ Less

Submitted 30 September, 2019; originally announced November 2019.

Comments: 24 pages, 7 figures

Finite element modeling of micropolar-based phononic crystals

Authors: Nicolás Guarín-Zapata, Juan Gomez, Camilo Valencia, Gary F. Dargush, Ali Reza Hadjesfandiari

Abstract: The performance of a Cosserat/micropolar solid as a numerical vehicle to represent dispersive media is explored. The study is conducted using the finite element method with emphasis on Hermiticity, positive definiteness, principle of virtual work and Bloch-Floquet boundary conditions. The periodic boundary conditions are given for both translational and rotational degrees of freedom and for the as… ▽ More The performance of a Cosserat/micropolar solid as a numerical vehicle to represent dispersive media is explored. The study is conducted using the finite element method with emphasis on Hermiticity, positive definiteness, principle of virtual work and Bloch-Floquet boundary conditions. The periodic boundary conditions are given for both translational and rotational degrees of freedom and for the associated force- and couple-traction vectors. Results in terms of band structures for different material cells and mechanical parameters are provided. △ Less

Submitted 13 September, 2019; originally announced September 2019.

Comments: 30 pages, 11 figures

MSC Class: 74B99; 74J99; 74S05

Effect of different buffer layers on the quality of InGaN layers grown on Si

Authors: V. J. Gómez, J. Grandal, A. Núñez-Cascajero, F. B. Naranjo, M. Varela, M. A. Sánchez-García, E. Calleja

Abstract: This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical conduction of n-InGaN/buffer-layer/p-Si heterostructures, with In composition near 46%, which theoretically produces an alignment of the bands, is analyzed. Droplet e… ▽ More This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical conduction of n-InGaN/buffer-layer/p-Si heterostructures, with In composition near 46%, which theoretically produces an alignment of the bands, is analyzed. Droplet elimination by radical-beam irradiation was successfully applied to grow high quality InGaN films on Si substrates for the first time. Among several buffer choices, an AlN buffer layer with a thickness above 24 nm improves the structural and optical quality of the InGaN epilayer while keeping a top to bottom ohmic behavior. These results will allow fabricating double-junction InGaN/Si solar cells without the need of tunnel junctions between the two sub-cells, therefore simplifying the device design. △ Less

Submitted 29 August, 2019; originally announced August 2019.

Journal ref: AIP Advances 8, 105026 (2018)

A general-purpose element-based approach to compute dispersion relations in periodic materials with existing finite element codes

Authors: Camilo Valencia, Juan Gomez, Nicolás Guarín-Zapata

Abstract: In most of standard Finite Element (FE) codes it is not easy to calculate dispersion relations from periodic materials. Here we propose a new strategy to calculate such dispersion relations with available FE codes using user element subroutines. Typically, the Bloch boundary conditions are applied to the global assembled matrices of the structure through a transformation matrix or row-and-column o… ▽ More In most of standard Finite Element (FE) codes it is not easy to calculate dispersion relations from periodic materials. Here we propose a new strategy to calculate such dispersion relations with available FE codes using user element subroutines. Typically, the Bloch boundary conditions are applied to the global assembled matrices of the structure through a transformation matrix or row-and-column operations. Such a process is difficult to implement in standard FE codes since the user does not have access to the global matrices. In this work, we apply those Bloch boundary conditions directly at the elemental level. The proposed strategy can be easily implemented in any FE code. This strategy can be used either in real or complex algebra solvers. It is general enough to permit any spatial dimension and physical phenomena involving periodic structures. A detailed process of calculation and assembly of the elemental matrices is shown. We verify our method with available analytical solutions and external numerical results, using different material models and unit cell geometries △ Less

Submitted 1 April, 2019; originally announced April 2019.

Comments: 24 pages, 14 figures

MSC Class: 62P35; 74A40; 74S05

Journal ref: Journal of Theoretical and Computational Acoustics, Vol. 28, No. 01, 1950005 (2020)

Enhancing sensitivity to rotations with quantum solitonic currents

Authors: Piero Naldesi, Juan Polo Gomez, Vanja Dunjko, Hélène Perrin, Maxim Olshanii, Luigi Amico, Anna Minguzzi

Abstract: Quantum mechanics is characterized by quantum coherence and entanglement. After having discovered how these fundamental concepts govern physical reality, scientists have been devoting intense efforts to harness them to shape future science and technology. This is a highly nontrivial task because most often quantum coherence and entanglement are difficult to access. Here, we demonstrate the enhance… ▽ More Quantum mechanics is characterized by quantum coherence and entanglement. After having discovered how these fundamental concepts govern physical reality, scientists have been devoting intense efforts to harness them to shape future science and technology. This is a highly nontrivial task because most often quantum coherence and entanglement are difficult to access. Here, we demonstrate the enhancement of the sensitivity of a quantum many-body system with specific coherence and entanglement properties. Our physical system is made of strongly correlated attracting neutral bosons flowing in a ring-shaped potential of mesoscopic size. Because of attractive interactions, quantum analogs of bright solitons are formed. As a genuine quantum-many-body feature, we demonstrate that angular momentum fractionalization occurs. As a consequence, the matter-wave current in our system can react to very small changes of rotation or other artificial gauge fields. We work out a protocol to entangle such quantum solitonic currents, allowing them to operate rotation sensors and gyroscopes to Heisenberg-limited sensitivity. △ Less

Submitted 17 November, 2020; v1 submitted 27 January, 2019; originally announced January 2019.

Comments: 8 pages, 4 figures

Traces of integrability in scattering of one-dimensional dimers on a barrier

Authors: Juan Polo Gomez, Anna Minguzzi, Maxim Olshanii

Abstract: We consider molecules made of two one-dimensional short-range-interacting bosonic atoms. We show that in the process of scattering of these molecules off a narrow barrier, odd incident waves produce \emph{no unbound atoms, even when the incident energy exceeds the dissociation threshold}. This effect is a consequence of a prohibition on chemical reactions acting in a generally unphysical Bethe Ans… ▽ More We consider molecules made of two one-dimensional short-range-interacting bosonic atoms. We show that in the process of scattering of these molecules off a narrow barrier, odd incident waves produce \emph{no unbound atoms, even when the incident energy exceeds the dissociation threshold}. This effect is a consequence of a prohibition on chemical reactions acting in a generally unphysical Bethe Ansatz integrable system of a $C_{2}$-type, with which our system shares the spatially odd eigenstates. We suggest several experimental implementations of the effect. We also propose to use the monomer production as an alternative read-out channel in an atom interferometer: unlike in the standard interferometric schemes, no spatial separation of the output channels will be required. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Raise and fall of a bright soliton in an optical lattice

Authors: Piero Naldesi, Juan Polo Gomez, Anna Minguzzi, Boris Malomed, Maxim Olshanii, Luigi Amico

Abstract: We study an ultracold atomic gas with attractive interactions in a one-dimensional optical lattice. We find that its excitation spectrum displays a quantum soliton band, corresponding to $N$-particle bound states, and a continuum band of other, mostly extended, states. For a system of a finite size, the two branches are degenerate in energy for weak interactions, while a gap opens above a threshol… ▽ More We study an ultracold atomic gas with attractive interactions in a one-dimensional optical lattice. We find that its excitation spectrum displays a quantum soliton band, corresponding to $N$-particle bound states, and a continuum band of other, mostly extended, states. For a system of a finite size, the two branches are degenerate in energy for weak interactions, while a gap opens above a threshold value for the interaction strength. We find that the interplay between degenerate extended and bound states has important consequences for both static and dynamical properties of the system. In particular, the solitonic states turn out to be protected from spatial perturbations and random disorder. We discuss how such dynamics implies that our system effectively provides an example of a quantum many-body system that, with the variation of the bosonic lattice filling, crosses over from integrable non-ergodic to non-integrable ergodic dynamics, through non-integrable non-ergodic regimes. △ Less

Submitted 17 December, 2018; v1 submitted 26 April, 2018; originally announced April 2018.

Comments: To be published in Physical Review Letters

Journal ref: Phys. Rev. Lett. 122, 053001 (2019)

Testing the influence of the temperature, RH and filler type and content on the Universal Power Law for new reduced graphene oxide TPU composites

Authors: Julio Gómez, Elvira Villaro, Ana Navas, Imanol Recio

Abstract: In this paper, 6 different reduced graphene oxide (rGO) were prepared by a modified Hummers method and reduced by thermochemical methods. rGO materials were intentionally prepared to obtain different BET and thickness and oxygen content maintaining constant the lateral size to compare its performance on thermoplastic polyurethane (TPU) matrix. Microstructure and the effect of the incorporation of… ▽ More In this paper, 6 different reduced graphene oxide (rGO) were prepared by a modified Hummers method and reduced by thermochemical methods. rGO materials were intentionally prepared to obtain different BET and thickness and oxygen content maintaining constant the lateral size to compare its performance on thermoplastic polyurethane (TPU) matrix. Microstructure and the effect of the incorporation of rGO on the hardness and electrical properties of TPU were investigated. It has been studied the temperature and humidity dependence of the electrical conductivity and the sensitivity and the response time to humidity changes have been determined. Influence of the filler content, temperature and humidity on the Jonschers universal power law (UPL) for ac conductivity vs frequency and its fitting parameters A and n were determined. It has been observed an anomalous behaviour (according to UPL) and a linear correlation between log A and n independently of the filler content, humidity and temperature, however there is an influence of the rGO used for the preparation of the composite. To study the transport mechanisms the experimental results were adjusted to the equation and the maximum adjustment for like other carbon nanocomposites however there is not an unequivocal behaviour. △ Less

Submitted 25 April, 2018; originally announced April 2018.

Comments: 16 pages

Journal ref: Mater. Res. Express 4 (2017) 105020

Layer-by-Layer Assembly of Efficient Flame Retardant Coatings Based On High Aspect Ratio Graphene Oxide and Chitosan Capable of Preventing Ignition of PU Foam

Authors: Lorenza Maddalena, Federico Carosio, Julio Gomez, Guido Saracco, Alberto Fina

Abstract: The layer-by-layer (LbL) technique is adopted for the construction of multilayers encompassing chitosan and graphene oxide (GO) platelets capable of improving the flame retardant properties open cell PU foams. The LbL assembly follows a linear growth regime as evaluated by infrared spectroscopy and yields a multilayer structure where GO platelets are embedded within a chitosan continuous matrix. 3… ▽ More The layer-by-layer (LbL) technique is adopted for the construction of multilayers encompassing chitosan and graphene oxide (GO) platelets capable of improving the flame retardant properties open cell PU foams. The LbL assembly follows a linear growth regime as evaluated by infrared spectroscopy and yields a multilayer structure where GO platelets are embedded within a chitosan continuous matrix. 3 and 6 bi-layers (BL) can efficiently coat the complex 3D structure of the foam and substantially improve its flame retardant properties. 3BL only add 10% to the original mass and can suppress the melt dripping during flammability and reduce both the peak of heat release rate by 54% and the total smoke released by 59% in forced combustion tests. Unprecedented among other LbL assemblies employed for FR purposes, the deposition 6BL is capable of slowing down the release of combustible volatile to the limits of non-ignitability thus preventing ignition in half of the specimens during cone calorimetry tests. This has been ascribed to the formation of a protective coating where the thermally stable char produced by chitosan serves as a continuous matrix embedding GO platelets, which control volatile release while mechanically sustaining the PU foam structure. △ Less

Submitted 27 April, 2018; v1 submitted 12 November, 2017; originally announced November 2017.

Journal ref: Polymer Degradation and Stability, Volume 152, June 2018, Pages 1-9

Morphology and properties evolution upon ring-opening polymerization during extrusion of cyclic butylene terephthalate and graphene-related-materials into thermally conductive nanocomposites

Authors: S. Colonna, O. Monticelli, J. Gomez, G. Saracco, A. Fina

Abstract: In this work, the study of thermal conductivity before and after in-situ ring-opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) in presence of graphene-related materials (GRM) is addressed, to gain insight in the modification of nanocomposites morphology upon polymerization. Five types of GRM were used: one type of graphite nanoplatelets, two different grad… ▽ More In this work, the study of thermal conductivity before and after in-situ ring-opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) in presence of graphene-related materials (GRM) is addressed, to gain insight in the modification of nanocomposites morphology upon polymerization. Five types of GRM were used: one type of graphite nanoplatelets, two different grades of reduced graphene oxide (rGO) and the same rGO grades after thermal annealing for 1 hour at 1700°C under vacuum to reduce their defectiveness. Polymerization of CBT into pCBT, morphology and nanoparticle organization were investigated by means of differential scanning calorimetry, electron microscopy and rheology. Electrical and thermal properties were investigated by means of volumetric resistivity and bulk thermal conductivity measurement. In particular, the reduction of nanoflake aspect ratio during ring-opening polymerization was found to have a detrimental effect on both electrical and thermal conductivities in nanocomposites. △ Less

Submitted 7 June, 2017; v1 submitted 2 March, 2017; originally announced March 2017.

Effect of processing conditions on the thermal and electrical conductivity of poly (butylene terephthalate) nanocomposites prepared via ring-opening polymerization

Authors: S. Colonna, M. M. Bernal, G. Gavoci, J. Gomez, C. Novara, G. Saracco, A. Fina

Abstract: Successful preparation of polymer nanocomposites, exploiting graphene-related materials, via melt mixing technology requires precise design, optimization and control of processing. In the present work, the effect of different processing parameters during the preparation of poly (butylene terephthalate) nanocomposites, through ring-opening polymerization of cyclic butylene terephthalate in presence… ▽ More Successful preparation of polymer nanocomposites, exploiting graphene-related materials, via melt mixing technology requires precise design, optimization and control of processing. In the present work, the effect of different processing parameters during the preparation of poly (butylene terephthalate) nanocomposites, through ring-opening polymerization of cyclic butylene terephthalate in presence of graphite nanoplatelets (GNP), was thoroughly addressed. Processing temperature (240°C or 260°C), extrusion time (5 or 10 minutes) and shear rate (50 or 100 rpm) were varied by means of a full factorial design of experiment approach, leading to the preparation of polybutylene terephthalate/GNP nanocomposite in 8 different processing conditions. Morphology and quality of GNP were investigated by means of electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry and Raman spectroscopy. Molecular weight of the polymer matrix in nanocomposites and nanoflake dispersion were experimentally determined as a function of the different processing conditions. The effect of transformation parameters on electrical and thermal properties was studied by means of electrical and thermal conductivity measurement. Heat and charge transport performance evidenced a clear correlation with the dispersion and fragmentation of the GNP nanoflakes; in particular, gentle processing conditions (low shear rate, short mixing time) turned out to be the most favourable condition to obtain high conductivity values. △ Less

Submitted 7 June, 2017; v1 submitted 2 March, 2017; originally announced March 2017.

Attenuated Coupled Cluster: A Heuristic Polynomial Similarity Transformation Incorporating Spin Symmetry Projection Into Traditional Coupled Cluster Theory

Authors: John A. Gomez, Thomas M. Henderson, Gustavo E. Scuseria

Abstract: In electronic structure theory, restricted single-reference coupled cluster (CC) captures weak correlation but fails catastrophically under strong correlation. Spin-projected unrestricted Hartree-Fock (SUHF), on the other hand, misses weak correlation but captures a large portion of strong correlation. The theoretical description of many important processes, e.g. molecular dissociation, requires a… ▽ More In electronic structure theory, restricted single-reference coupled cluster (CC) captures weak correlation but fails catastrophically under strong correlation. Spin-projected unrestricted Hartree-Fock (SUHF), on the other hand, misses weak correlation but captures a large portion of strong correlation. The theoretical description of many important processes, e.g. molecular dissociation, requires a method capable of accurately capturing both weak- and strong correlation simultaneously, and would likely benefit from a combined CC-SUHF approach. Based on what we have recently learned about SUHF written as particle-hole excitations out of a symmetry-adapted reference determinant, we here propose a heuristic coupled cluster doubles model to attenuate the dominant spin collective channel of the quadratic terms in the coupled cluster equations. Proof of principle results presented here are encouraging and point to several paths forward for improving the method further. △ Less

Submitted 2 February, 2017; originally announced February 2017.

Comments: 20 pages, 10 figures

Effect of morphology and defectiveness of graphene-related materials on the electrical and thermal conductivity of their polymer nanocomposites

Authors: S. Colonna, O. Monticelli, J. Gomez, C. Novara, G. Saracco, A. Fina

Abstract: In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of graphite nanoplatelets (GNP) and two different grades of reduced graphene oxide (rGO) were used. Furthermore, high temperature annealing treatment under vacuum at… ▽ More In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of graphite nanoplatelets (GNP) and two different grades of reduced graphene oxide (rGO) were used. Furthermore, high temperature annealing treatment under vacuum at 1700°C was carried out on both RGO to reduce their defectiveness and study the correlation between the electrical/thermal properties of the nanocomposites and the nanoflakes structure/defectiveness. The morphology and quality of the nanomaterials were investigated by means of electron microscopy, x-ray photoelectron spectroscopy, thermogravimetry and Raman spectroscopy. Thermal, mechanical and electrical properties of the nanocomposites were investigated by means of rheology, dynamic mechanical thermal analysis, volumetric resistivity and thermal conductivity measurements. Physical properties of nanocomposites were correlated with the structure and defectiveness of nanoflakes, evidencing a strong dependence of properties on nanoflakes structure and defectiveness. In particular, a significant enhancement of both thermal and electrical conductivities was demonstrated upon the reduction of nanoflakes defectiveness. △ Less

Submitted 26 October, 2016; v1 submitted 6 September, 2016; originally announced September 2016.

Journal ref: Polymer 102 (2016) 292-300

Effect of thermal annealing on the heat transfer properties of reduced graphite oxide flakes: a nanoscale characterization via scanning thermal microscopy

Authors: M. Tortello, S. Colonna, M. Bernal, J. Gomez, M. Pavese, C. Novara, F. Giorgis, M. Maggio, G. Guerra, G. Saracco, R. S. Gonnelli, A. Fina

Abstract: This paper reports on the thermal properties of reduced graphite oxide (RGO) flakes, studied by means of scanning thermal microscopy (SThM). This technique was demonstrated to allow thermal characterization of the flakes with a spatial resolution of the order of a few tens of nanometers, while recording nanoscale topography at the same time. Several individual RGO flakes were analyzed by SThM, bot… ▽ More This paper reports on the thermal properties of reduced graphite oxide (RGO) flakes, studied by means of scanning thermal microscopy (SThM). This technique was demonstrated to allow thermal characterization of the flakes with a spatial resolution of the order of a few tens of nanometers, while recording nanoscale topography at the same time. Several individual RGO flakes were analyzed by SThM, both as obtained after conventional thermal reduction and after a subsequent annealing at 1700°C. Significant differences in the thermal maps were observed between pristine and annealed flakes, reflecting higher heat dissipation on annealed RGO flakes compared with pristine ones. This result was correlated with the reduction of RGO structure defectiveness. In particular, a substantial reduction of oxidized groups and sp3 carbons upon annealing was proven by X-ray photoelectron and Raman spectroscopies, while the increase of crystalline order was demonstrated by X-ray diffraction, in terms of higher correlation lengths both along and perpendicular to the graphene planes. Results presented in this paper provide experimental evidence for the qualitative correlation between the defectiveness of graphene-related materials and their thermal conductivity, which is clearly crucial for the exploitation of these materials into thermally conductive nanocomposites. △ Less

Submitted 15 September, 2016; v1 submitted 4 September, 2016; originally announced September 2016.

Journal ref: Carbon volume 109, November 2016, 390-401

Shear Wave Filtering in Naturally-Occurring Bouligand Structures

Authors: Nicolás Guarín-Zapata, Juan Gomez, Nick Yaraghi, David Kisailus, Pablo D. Zavattieri

Abstract: Wave propagation was investigated in the Bouligand-like structure from within the dactyl club of the Stomatopod, a crustacean that is known to smash their heavily shelled preys with high accelerations. We incorporate the layered nature in a unitary material cell through the propagator matrix formalism while the periodic nature of the material is considered via Bloch boundary conditions as applied… ▽ More Wave propagation was investigated in the Bouligand-like structure from within the dactyl club of the Stomatopod, a crustacean that is known to smash their heavily shelled preys with high accelerations. We incorporate the layered nature in a unitary material cell through the propagator matrix formalism while the periodic nature of the material is considered via Bloch boundary conditions as applied in the theory of solid state physics. Our results show that these materials exhibit bandgaps at frequencies related to the stress pulse generated by the impact of the dactyl club to its prey, and therefore exhibiting wave filtering in addition to the already known mechanisms of macroscopic isotropic behavior and toughness. △ Less

Submitted 15 May, 2015; originally announced May 2015.

Comments: 19 pages, 7 figures, In press, Acta Biomaterialia (2015)

MSC Class: 74J20; 74B05; 74E10; 74A40

Correlation between magnetic interactions and domain structure in A1 FePt ferromagnetic thin films

Authors: N. Álvarez, E. Sallica Leva, R. C. Valente, M. Vásquez Mansilla, J. Gómez, J. Milano, A. Butera

Abstract: We have investigated the relationship between the domain structure and the magnetic interactions in a series of FePt ferromagnetic thin films of varying thickness. As-made films grow in the magnetically soft and chemically disordered A1 phase that may have two distinct domain structures. Above a critical thickness $d_{cr}\sim 30$ nm the presence of an out of plane anisotropy induces the formation… ▽ More We have investigated the relationship between the domain structure and the magnetic interactions in a series of FePt ferromagnetic thin films of varying thickness. As-made films grow in the magnetically soft and chemically disordered A1 phase that may have two distinct domain structures. Above a critical thickness $d_{cr}\sim 30$ nm the presence of an out of plane anisotropy induces the formation of stripes, while for $d<d_{cr}$ planar domains occur. Magnetic interactions have been characterized using the well known DCD-IRM remanence protocols, $δM$ plots, and magnetic viscosity measurements. We have observed a strong correlation between the domain configuration and the sign of the magnetic interactions. Planar domains are associated with positive exchange-like interactions, while stripe domains have a strong negative dipolar-like contribution. In this last case we have found a close correlation between the interaction parameter and the surface dipolar energy of the stripe domain structure. Using time dependent magnetic viscosity measurements, we have also estimated an average activation volume for magnetic reversal, $\langle V_{ac}\rangle \sim 1.37\times 10^{4}$ nm$^{3},$ which is approximately independent of the film thickness or the stripe period. △ Less

Submitted 26 February, 2014; originally announced February 2014.

Comments: 25 pages, 11 figures

Journal ref: J. Appl. Phys. 115, 083907 (2014)

Giant Collective Spin-Orbit Field in a Quantum Well: Fine Structure of Spin Plasmons

Authors: Florent Baboux, Florent Perez, Carsten A. Ullrich, Irene D'Amico, Javier Gómez, Mathieu Bernard

Abstract: We employ inelastic light scattering with magnetic fields to study intersubband spin plasmons in a quantum well. We demonstrate the existence of a giant collective spin-orbit (SO) field that splits the spin-plasmon spectrum into a triplet. The effect is remarkable as each individual electron would be expected to precess in its own momentum-dependent SO field, leading to D'yakonov-Perel' dephasing.… ▽ More We employ inelastic light scattering with magnetic fields to study intersubband spin plasmons in a quantum well. We demonstrate the existence of a giant collective spin-orbit (SO) field that splits the spin-plasmon spectrum into a triplet. The effect is remarkable as each individual electron would be expected to precess in its own momentum-dependent SO field, leading to D'yakonov-Perel' dephasing. Instead, many-body effects lead to a striking organization of the SO fields at the collective level. The macroscopic spin moment is quantized by a uniform collective SO field, five times higher than the individual SO field. We provide a momentum-space cartography of this field. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Comments: 5 pages, 4 figures. Supplemental material available here as an ancillary file

Journal ref: Phys. Rev. Lett. 109, 166401 (2012)

Electrically Detected Magnetic Resonance Modeling and Fitting: An Equivalent Circuit Approach

Authors: Douglas M. G. Leite, Augusto Batagin-Neto, Oswaldo Nunes-Neto, Jorge A. Gómez, Carlos F. O. Graeff

Abstract: Continuous-wave electrically detected magnetic resonance (cw-EDMR or just EDMR) and its variants are powerful tools to investigate spin-dependent processes in materials and devices. The use of quadrature detection improves the quality and selectivity of EDMR analysis by allowing, for example, the separation of individual resonant spin lines. Here we propose an equivalent circuit model in order to… ▽ More Continuous-wave electrically detected magnetic resonance (cw-EDMR or just EDMR) and its variants are powerful tools to investigate spin-dependent processes in materials and devices. The use of quadrature detection improves the quality and selectivity of EDMR analysis by allowing, for example, the separation of individual resonant spin lines. Here we propose an equivalent circuit model in order to better understand the EDMR quadrature signal in a variety of different situations. The model considers not just the electrical response of the sample but of cables and measuring circuit and its influence on the resulting spectral lines. Recent EDMR spectra from Alq3 based OLEDs, as well as from a-Si:H reported in the literature, were successfully described by the model. Moreover, the model allows the implementation of a fitting routine that can be easily used to determine accurate values of crucial parameters such as g-factor and linewidth of the resonant lines. △ Less

Submitted 3 July, 2013; originally announced July 2013.

Comments: 10 pages, 8 figures, original research article, being submitted to Journal of Applied Physics

Horizontal Visibility graphs generated by type-I intermittency

Authors: Ángel M. Núñez, Bartolo Luque, Lucas Lacasa, José Patricio Gómez, Alberto Robledo

Abstract: The type-I intermittency route to (or out of) chaos is investigated within the Horizontal Visibility graph theory. For that purpose, we address the trajectories generated by unimodal maps close to an inverse tangent bifurcation and construct, according to the Horizontal Visibility algorithm, their associated graphs. We show how the alternation of laminar episodes and chaotic bursts has a fingerpri… ▽ More The type-I intermittency route to (or out of) chaos is investigated within the Horizontal Visibility graph theory. For that purpose, we address the trajectories generated by unimodal maps close to an inverse tangent bifurcation and construct, according to the Horizontal Visibility algorithm, their associated graphs. We show how the alternation of laminar episodes and chaotic bursts has a fingerprint in the resulting graph structure. Accordingly, we derive a phenomenological theory that predicts quantitative values of several network parameters. In particular, we predict that the characteristic power law scaling of the mean length of laminar trend sizes is fully inherited in the variance of the graph degree distribution, in good agreement with the numerics. We also report numerical evidence on how the characteristic power-law scaling of the Lyapunov exponent as a function of the distance to the tangent bifurcation is inherited in the graph by an analogous scaling of the block entropy over the degree distribution. Furthermore, we are able to recast the full set of HV graphs generated by intermittent dynamics into a renormalization group framework, where the fixed points of its graph-theoretical RG flow account for the different types of dynamics. We also establish that the nontrivial fixed point of this flow coincides with the tangency condition and that the corresponding invariant graph exhibit extremal entropic properties. △ Less

Submitted 21 January, 2013; originally announced January 2013.

Comments: 8 figures

Spin polarized transport driven by square voltage pulses in a quantum dot system

Authors: F. M. Souza, J. A. Gomez

Abstract: We calculate current, spin current and tunnel magnetoresistance (TMR) for a quantum dot coupled to ferromagnetic leads in the presence of a square wave of bias voltage. Our results are obtained via time-dependent nonequilibrium Green function. Both parallel and antiparallel lead magnetization alignments are considered. The main findings include a wave of spin accumulation and spin current that c… ▽ More We calculate current, spin current and tunnel magnetoresistance (TMR) for a quantum dot coupled to ferromagnetic leads in the presence of a square wave of bias voltage. Our results are obtained via time-dependent nonequilibrium Green function. Both parallel and antiparallel lead magnetization alignments are considered. The main findings include a wave of spin accumulation and spin current that can change sign as the time evolves, spikes in the TMR signal and a TMR sign change due to an ultrafast switch from forward to reverse current in the emitter lead. △ Less

Submitted 25 June, 2008; originally announced June 2008.

Comments: 11 pages, 5 figures

Long-range ferromagnetism of Mn12 acetate single-molecule magnets under a transverse magnetic field

Authors: F. Luis, J. Campo, J. Gomez, G. J. McIntyre, J. Luzon, D. Ruiz-Molina

Abstract: We use neutron diffraction to probe the magnetization components of a crystal of Mn12 single-molecule magnets. Each of these molecules behaves, at low temperatures, as a nanomagnet with spin S = 10 and strong anisotropy along the crystallographic c axis. Application of a magnetic field perpendicular to c induces quantum tunneling between opposite spin orientations, enabling the spins to attain t… ▽ More We use neutron diffraction to probe the magnetization components of a crystal of Mn12 single-molecule magnets. Each of these molecules behaves, at low temperatures, as a nanomagnet with spin S = 10 and strong anisotropy along the crystallographic c axis. Application of a magnetic field perpendicular to c induces quantum tunneling between opposite spin orientations, enabling the spins to attain thermal equilibrium. Below approximately 0.9 K, intermolecular interactions turn this equilibrium state into a ferromagnetically ordered phase. However, long range ferromagnetic correlations nearly disappear for fields larger 5.5 T, possibly suggesting the existence of a quantum critical point. △ Less

Submitted 26 August, 2005; originally announced August 2005.

Comments: 4 pages, 4 figures

$1/f^α$ Noise in Spectral Fluctuations of Quantum Systems

Authors: J. M. G. Gomez, A. Relano, J. Retamosa, E. Faleiro, L. Salasnich, M. Vranicar, M. Robnik

Abstract: The power law $1/f^α$ in the power spectrum characterizes the fluctuating observables of many complex natural systems. Considering the energy levels of a quantum system as a discrete time series where the energy plays the role of time, the level fluctuations can be characterized by the power spectrum. Using a family of quantum billiards, we analyze the order to chaos transition in terms of this… ▽ More The power law $1/f^α$ in the power spectrum characterizes the fluctuating observables of many complex natural systems. Considering the energy levels of a quantum system as a discrete time series where the energy plays the role of time, the level fluctuations can be characterized by the power spectrum. Using a family of quantum billiards, we analyze the order to chaos transition in terms of this power spectrum. A power law $1/f^α$ is found at all the transition stages, and it is shown that the exponent $α$ is related to the chaotic component of the classical phase space of the quantum system. △ Less

Submitted 4 February, 2005; originally announced February 2005.

Comments: 4 pages, 5 figures, accepted for publication in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 94, 084101 (2005)

Using synchronization to improve earthquake forecasting in a cellular automaton model

Authors: Álvaro González, Miguel Vázquez-Prada, Javier B. Gómez, Amalio F. Pacheco

Abstract: A new forecasting strategy for stochastic systems is introduced. It is inspired by the concept of anticipated synchronization between pairs of chaotic oscillators, recently developed in the area of Dynamical Systems, and by the earthquake forecasting algorithms in which different pattern recognition functions are used for identifying seismic premonitory phenomena. In the new strategy, copies (cl… ▽ More A new forecasting strategy for stochastic systems is introduced. It is inspired by the concept of anticipated synchronization between pairs of chaotic oscillators, recently developed in the area of Dynamical Systems, and by the earthquake forecasting algorithms in which different pattern recognition functions are used for identifying seismic premonitory phenomena. In the new strategy, copies (clones) of the original system (the master) are defined, and they are driven using rules that tend to synchronize them with the master dynamics. The observation of definite patterns in the state of the clones is the signal for connecting an alarm in the original system that efficiently marks the impending occurrence of a catastrophic event. The power of this method is quantitatively illustrated by forecasting the occurrence of characteristic earthquakes in the so-called Minimalist Model. △ Less

Submitted 23 March, 2004; originally announced March 2004.

Comments: 4 pages, 3 figures

Epidemic Incidence in Correlated Complex Networks

Authors: Yamir Moreno, Javier B. Gomez, Amalio F. Pacheco

Abstract: We introduce a numerical method to solve epidemic models on the underlying topology of complex networks. The approach exploits the mean-field like rate equations describing the system and allows to work with very large system sizes, where Monte Carlo simulations are useless due to memory needs. We then study the SIR epidemiological model on assortative networks, providing numerical evidence of t… ▽ More We introduce a numerical method to solve epidemic models on the underlying topology of complex networks. The approach exploits the mean-field like rate equations describing the system and allows to work with very large system sizes, where Monte Carlo simulations are useless due to memory needs. We then study the SIR epidemiological model on assortative networks, providing numerical evidence of the absence of epidemic thresholds. Besides, the time profiles of the populations are analyzed. Finally, we stress that the present method would allow to solve arbitrary epidemic-like models provided that they can be described by mean-field rate equations. △ Less

Submitted 19 September, 2003; originally announced September 2003.

Comments: 5 pages, 4 figures. Final version published in PRE

Journal ref: Phys. Rev. E 68, 035103(R) (2003)

Error Diagrams and Temporal Correlations in a Fracture Model with Characteristic and Power-Law Distributed Avalanches

Authors: Yamir Moreno, Miguel Vazquez-Prada, Javier B. Gomez, Amalio F. Pacheco

Abstract: Forecasting failure events is one of the most important problems in fracture mechanics and related sciences. In this paper, we use the Molchan scheme to investigate the error diagrams in a fracture model which has the notable advantage of displaying two completely different regimes according to the heterogeneity of the system. In one regime, a characteristic event is observed while for the secon… ▽ More Forecasting failure events is one of the most important problems in fracture mechanics and related sciences. In this paper, we use the Molchan scheme to investigate the error diagrams in a fracture model which has the notable advantage of displaying two completely different regimes according to the heterogeneity of the system. In one regime, a characteristic event is observed while for the second regime a power-law spectrum of avalanches is obtained reminiscent of self-organized criticality. We find that both regimes are different when predicting large avalanches and that, in the second regime, there are non-trivial temporal correlations associated to clustering of large events. Finally, we extend the discussion to seismology, where both kinds of avalanche size distributions can be seen. △ Less

Submitted 11 July, 2003; v1 submitted 16 April, 2003; originally announced April 2003.

Comments: 6 pages, 5 eps figures. Final version to appear in Eur. Phys. J. B

Journal ref: Eur. Phys. J. B 34, 489 (2003)

A Minimalist Model of Characteristic Earthquakes

Authors: Miguel Vazquez-Prada, Alvaro Gonzalez, Javier B. Gomez, Amalio F. Pacheco

Abstract: In a spirit akin to the sandpile model of self-organized criticality, we present a simple statistical model of the cellular-automaton type which produces an avalanche spectrum similar to the characteristic-earthquake behavior of some seismic faults. This model, that has no parameter, is amenable to an algebraic description as a Markov Chain. This possibility illuminates some important results, o… ▽ More In a spirit akin to the sandpile model of self-organized criticality, we present a simple statistical model of the cellular-automaton type which produces an avalanche spectrum similar to the characteristic-earthquake behavior of some seismic faults. This model, that has no parameter, is amenable to an algebraic description as a Markov Chain. This possibility illuminates some important results, obtained by Monte Carlo simulations, such as the earthquake size-frequency relation and the recurrence time of the characteristic earthquake. △ Less

Submitted 17 December, 2001; originally announced December 2001.

Comments: 9 pages, 4 figures

Exact numerical solution for a time-dependent fiber-bundle model with continuous damage

Authors: L. Moral, J. B. Gomez, Y. Moreno, A. F. Pacheco

Abstract: A time-dependent global fiber-bundle model of fracture with continuous damage was recently formulated in terms of an autonomous differential system and numerically solved by applying a discrete probabilistic method. In this paper we provide a method to obtain the exact numerical solution for this problem. It is based on the introduction of successive integrating parameters which permits a robust… ▽ More A time-dependent global fiber-bundle model of fracture with continuous damage was recently formulated in terms of an autonomous differential system and numerically solved by applying a discrete probabilistic method. In this paper we provide a method to obtain the exact numerical solution for this problem. It is based on the introduction of successive integrating parameters which permits a robust inversion of the numerical integrations appearing in the problem. △ Less

Submitted 11 September, 2001; originally announced September 2001.

Comments: 7 pages, 2 figures. Submitted for publication

Journal ref: Journal of Physics A: Math. and Gen., 34, 9983 (2001).

Instability of scale-free networks under node-breaking avalanches

Authors: Y. Moreno, J. B. Gómez, A. F. Pacheco

Abstract: The instability introduced in a large scale-free network by the triggering of node-breaking avalanches is analyzed using the fiber-bundle model as conceptual framework. We found, by measuring the size of the giant component, the avalanche size distribution and other quantities, the existence of an abrupt transition. This test of strength for complex networks like Internet is more stringent than… ▽ More The instability introduced in a large scale-free network by the triggering of node-breaking avalanches is analyzed using the fiber-bundle model as conceptual framework. We found, by measuring the size of the giant component, the avalanche size distribution and other quantities, the existence of an abrupt transition. This test of strength for complex networks like Internet is more stringent than others recently considered like the random removal of nodes, analyzed within the framework of percolation theory. Finally, we discuss the possible implications of our results and their relevance in forecasting cascading failures in scale-free networks. △ Less

Submitted 27 February, 2002; v1 submitted 7 June, 2001; originally announced June 2001.

Comments: 4 pages, 4 figures, final version to be published in Europhys. Lett

Journal ref: Europhys. Lett., 58 (4), 630 (2002).

Phase Transitions in Load Transfer Models of Fracture

Authors: Y. Moreno, J. B. Gomez, A. F. Pacheco

Abstract: The possible paralelism existing between phase transitions and fracture in disordered materials, is discussed using the well-known Fiber Bundle Models and a probabilistic approach suited to smooth fluctuations near the critical point. Two limiting cases of load redistribution are analyzed: the global transfer scheme, and the local transfer rule. The models are then studied and contrasted by defi… ▽ More The possible paralelism existing between phase transitions and fracture in disordered materials, is discussed using the well-known Fiber Bundle Models and a probabilistic approach suited to smooth fluctuations near the critical point. Two limiting cases of load redistribution are analyzed: the global transfer scheme, and the local transfer rule. The models are then studied and contrasted by defining the branching ratio as an order parameter indicative of the distance of the system to the critical point. In the case of long range interactions, i.e., the global rule, the results indicate that fracture can be seen as a second-order phase transition, whereas for the case of short range interactions (the local transfer rule) the bundle fails suddenly with no prior significant precursory activity signaling the imminent collapse of the system, this case being a first-order like phase transition. △ Less

Submitted 16 March, 2001; originally announced March 2001.

Comments: 5 figures, to appear

Journal ref: Physica A, 296, 9-23 (2001)

Time dependence of breakdown in a global fiber-bundle model with continuous damage

Authors: L. Moral, Y. Moreno, J. B. Gomez, A. F. Pacheco

Abstract: A time-dependent global fiber-bundle model of fracture with continuous damage is formulated in terms of a set of coupled non-linear differential equations. A first integral of this set is analytically obtained. The time evolution of the system is studied by applying a discrete probabilistic method. Several results are discussed emphasizing their differences with the standard time-dependent model… ▽ More A time-dependent global fiber-bundle model of fracture with continuous damage is formulated in terms of a set of coupled non-linear differential equations. A first integral of this set is analytically obtained. The time evolution of the system is studied by applying a discrete probabilistic method. Several results are discussed emphasizing their differences with the standard time-dependent model. The results obtained show that with this simple model a variety of experimental observations can be qualitatively reproduced. △ Less

Submitted 16 March, 2001; originally announced March 2001.

Comments: APS style, two columns, 4 figures. To appear in Phys. Rev. E

Journal ref: Physical Review E, 63 (06), 6106 (2001)(art.no.066106).

A model for complex aftershock sequences

Authors: Y. Moreno, A. Correig, J. B. Gomez, A. F. Pacheco

Abstract: The decay rate of aftershocks is commonly very well described by the modified Omori law, $n(t) \propto t^{-p}$, where n(t) is the number of aftershocks per unit time, t is the time after the main shock, and p is a constant in the range 0.9<p<1.5, and usually close to 1. But there are also more complex aftershock sequences for which the Omori law can be considered only as a first approximation. O… ▽ More The decay rate of aftershocks is commonly very well described by the modified Omori law, $n(t) \propto t^{-p}$, where n(t) is the number of aftershocks per unit time, t is the time after the main shock, and p is a constant in the range 0.9<p<1.5, and usually close to 1. But there are also more complex aftershock sequences for which the Omori law can be considered only as a first approximation. One of these complex aftershock sequences took place in the Eastern Pyrenees on February 18, 1996, and was described in detail by {\it Correig et al.} [1997]. In this paper, we propose a new model inspired by dynamic fiber-bundle models to interpret this type of complex aftershock sequences with sudden increases in the rate of aftershock production not directly related to the magnitude of the aftershocks (as in the epidemic-type aftershock sequences). The model is a simple, discrete, stochastic fracture model where the elements (asperities or barriers) break because of static fatigue, transfer stress according to a local load-sharing rule and then are regenerated. We find a very good agreement between the model and the Eastern Pyrenees aftershock sequence and we propose that the key mechanism for explaining aftershocks, apart from a time-dependent rock strength, is the presence of dynamic stress fluctuations which constantly reset the initial conditions for the next aftershock in the sequence. △ Less

Submitted 5 December, 2000; originally announced December 2000.

Comments: 10 pages (two column), 5 figures. To appear in Journal of Geophysical Research

Journal ref: Journal of Geophysical Research, 106 B4, 6609-6619 (2001).