-
High-frequency Optimally Windowed Chirp rheometry for rapidly evolving viscoelastic materials: application to a crosslinking thermoset
Authors:
Thanasis Athanasiou,
Michela Geri,
Patrice Roose,
Gareth H. McKinley,
George Petekidis
Abstract:
Abstract
Knowledge of the evolution of mechanical properties of the curing matrix is of great importance in composite parts or structure fabrication. Conventional rheometry, based on small amplitude oscillatory shear is limited by long interrogation times. In rapidly evolving materials, time sweeps can provide a meaningful measurement albeit at a single frequency. To overcome this constraint we…
▽ More
Abstract
Knowledge of the evolution of mechanical properties of the curing matrix is of great importance in composite parts or structure fabrication. Conventional rheometry, based on small amplitude oscillatory shear is limited by long interrogation times. In rapidly evolving materials, time sweeps can provide a meaningful measurement albeit at a single frequency. To overcome this constraint we utilize a combined frequency and amplitude-modulated chirped strain waveform in conjunction with a home-made sliding plate piezo-operated (PZR) and a dual-head commercial rotational rheometer (Anton Paar MCR 702) to probe the linear viscoelasticity of these time-evolving materials. The direct controllability of the PZR resulting from the absence of any kind of firmware and the microsecond actuator-sensor response renders this device ideal for exploring the advantages of this technique. The high frequency capability allows us to extend the upper limits of the accessible linear viscoelastic spectrum and most importantly, to shorten the length of the interrogating strain signal (OWCh-PZR) to sub-second scales, while retaining a high time-bandwidth product. This short duration ensures that the mutation number (NMu) is kept sufficiently low, even in fast curing resins. The method is validated via calibration tests in both instruments and the corresponding limitations are discussed. As a proof of concept the technique is applied to a curing vinylester resin. The linear viscoelastic (LVE) spectrum is assessed every 20 seconds to monitor the rapid evolution of the time- and frequency-dependence of the complex modulus. Finally, FTIR spectroscopy is utilized to gain insights on the evolution of the chemical network while the gap-dependence of the evolving material properties in these heterogeneous systems is also investigated.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
The hidden hierarchical nature of soft particulate gels
Authors:
Minaspi Bantawa,
Bavand Keshavarz,
Michela Geri,
Mehdi Bouzid,
Thibaut Divoux,
Gareth H. McKinley,
Emanuela Del Gado
Abstract:
Soft particulate gels include materials we can eat, squeeze, or 3D print. From foods to bio-inks to cement hydrates, these gels are composed of a small amount of particulate matter (proteins, polymers, colloidal particles, or agglomerates of various origins) embedded in a continuous fluid phase. The solid components assemble to form a porous matrix, providing rigidity and control of the mechanical…
▽ More
Soft particulate gels include materials we can eat, squeeze, or 3D print. From foods to bio-inks to cement hydrates, these gels are composed of a small amount of particulate matter (proteins, polymers, colloidal particles, or agglomerates of various origins) embedded in a continuous fluid phase. The solid components assemble to form a porous matrix, providing rigidity and control of the mechanical response, despite being the minority constituent. The rheological response and gel elasticity are direct functions of the particle volume fraction $φ$: however, the diverse range of different functional dependencies reported experimentally has, to date, challenged efforts to identify general scaling laws. Here we reveal a hidden hierarchical organization of fractal elements that controls the viscoelastic spectrum, and which is associated with the spatial heterogeneity of the solid matrix topology. The fractal elements form the foundations of a viscoelastic master curve, which we construct using large-scale 3D microscopic simulations of model gels, and can be described by a recursive rheological ladder model over a range of particle volume fractions and gelation rates. The hierarchy of the fractal elements provides the missing general framework required to predict the gel elasticity and the viscoelastic response of these ubiquitous complex materials.
△ Less
Submitted 7 November, 2022;
originally announced November 2022.
-
Interplay between wall slip and shear banding in a thixotropic yield stress fluid
Authors:
Michela Geri,
Brice Saint-Michel,
Thibaut Divoux,
Gareth H. McKinley,
Sebastien Manneville
Abstract:
We study the local dynamics of a thixotropic yield stress fluid that shows a pronounced non-monotonic flow curve. This mechanically unstable behavior is generally not observable from standard rheometry tests, resulting in a stress plateau that stems from the coexistence of a flowing band with an unyielded region below a critical shear rate $\dot γ_c$. Combining ultrasound velocimetry with standard…
▽ More
We study the local dynamics of a thixotropic yield stress fluid that shows a pronounced non-monotonic flow curve. This mechanically unstable behavior is generally not observable from standard rheometry tests, resulting in a stress plateau that stems from the coexistence of a flowing band with an unyielded region below a critical shear rate $\dot γ_c$. Combining ultrasound velocimetry with standard rheometry, we discover an original shear-banding scenario in the decreasing branch of the flow curve of model paraffin gels, in which the flow profile of the flowing band is set by the applied shear rate $\gd$ instead of $\dot γ_c$. As a consequence, the material slips at the walls with a velocity that shows a non-trivial dependence on the applied shear rate. To capture our observations, we propose a differential version of the so-called lever rule, describing the extent of the flowing band and the evolution of wall slip with shear rate. This phenomenological model holds down to very low shear rates, at which the dimension of the flowing band becomes comparable to the size of the wax particles that constitute the gel microstructure, leading to cooperative effects. Our approach provides a framework where constraints imposed in the classical shear-banding scenario can be relaxed, with wall slip acting as an additional degree of freedom.
△ Less
Submitted 19 February, 2024; v1 submitted 16 November, 2021;
originally announced November 2021.
-
Medium Amplitude Parallel Superposition (MAPS) Rheology, Part 2: Experimental Protocols and Data Analysis
Authors:
Kyle R. Lennon,
Michela Geri,
Gareth H. McKinley,
James W. Swan
Abstract:
An experimental protocol is developed to directly measure the new material functions revealed by medium amplitude parallel superposition (MAPS) rheology. This experimental protocol measures the medium amplitude response of a material to a simple shear deformation composed of three sine waves at different frequencies. Imposing this deformation and measuring the mechanical response reveals a rich da…
▽ More
An experimental protocol is developed to directly measure the new material functions revealed by medium amplitude parallel superposition (MAPS) rheology. This experimental protocol measures the medium amplitude response of a material to a simple shear deformation composed of three sine waves at different frequencies. Imposing this deformation and measuring the mechanical response reveals a rich data set consisting of up to 19 measurements of the third order complex modulus at distinct three-frequency coordinates. We discuss how the choice of the input frequencies influences the features of the MAPS domain studied by the experiment. A polynomial interpolation method for reducing the bias of measured values from spectral leakage and variance due to noise is discussed, including a derivation of the optimal range of amplitudes for the input signal. This leads to the conclusion that conducting the experiment in a stress-controlled fashion possesses a distinct advantage to the strain-controlled mode. The experimental protocol is demonstrated through measurements of the MAPS response of a model complex fluid: a surfactant solution of wormlike micelles. The resulting data set is indeed large and feature-rich, while still being acquired in a time comparable to similar medium amplitude oscillatory shear (MAOS) experiments. We demonstrate that the data represents measurements of an intrinsic material function by studying its internal consistency, its compatibility with low-frequency predictions for Coleman-Noll simple fluids, and its agreement with data obtained via MAOS amplitude sweeps. Finally, the data is compared to predictions from the corotational Maxwell model to demonstrate the power of MAPS rheology in determining whether a constitutive model is consistent with a material's time-dependent response.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Computing the linear viscoelastic properties of soft gels using an Optimally Windowed Chirp protocol
Authors:
Mehdi Bouzid,
Bavand Keshavarz,
Michela Geri,
Thibaut Divoux,
Emanuela Del Gado,
Gareth H. McKinley
Abstract:
We use molecular dynamics simulations of a model three-dimensional particulate gel, to investigate the linear viscoelastic response. The numerical simulations are combined with a novel test protocol (the optimally- windowed chirp or OWCh), in which a continuous exponentially-varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyze…
▽ More
We use molecular dynamics simulations of a model three-dimensional particulate gel, to investigate the linear viscoelastic response. The numerical simulations are combined with a novel test protocol (the optimally- windowed chirp or OWCh), in which a continuous exponentially-varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyzed in the Fourier domain. We show that i) OWCh leads to an accurate computation of the full frequency spectrum at a rate significantly faster than with the traditional discrete frequency sweeps, and with a reasonably high signal-to-noise ratio, and ii) the bulk viscoelastic response of the microscopic model can be described in terms of a simple mesoscopic constitutive model. The simulated gel response is in fact well described by a mechanical model corresponding to a fractional Kelvin-Voigt model with a single Scott-Blair (or springpot) element and a spring in parallel. By varying the viscous damping and the particle mass used in the microscopic simulations over a wide range of values, we demonstrate the existence of a single master curve for the frequency dependence of the viscoelastic response of the gel that is fully predicted by the constitutive model. By developing a fast and robust protocol for evaluating the linear viscoelastic spectrum of these soft solids, we open the path towards novel multiscale insight into the rheological response for such complex materials.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
Time-Resolved Mechanical Spectroscopy of Soft Materials via Optimally Windowed Chirps
Authors:
Michela Geri,
Bavand Keshavarz,
Thibaut Divoux,
Christian Clasen,
Dan J. Curtis,
Gareth H. McKinley
Abstract:
The ability to measure the bulk dynamic behavior of soft materials with combined time- and frequency-resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domain, mainly due t…
▽ More
The ability to measure the bulk dynamic behavior of soft materials with combined time- and frequency-resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domain, mainly due to the use of elementary input signals that have not been designed for fast time-evolving systems such as materials undergoing gelation, curing or self-healing. In this work, we develop an optimized and robust excitation signal for time-resolved mechanical spectroscopy through the introduction of joint frequency- and amplitude-modulated exponential chirps. Inspired by the biosonar signals of bats and dolphins, we optimize the signal profile to maximize the signal-to-noise ratio while minimizing spectral leakage with a carefully-designed modulation of the envelope of the chirp. A combined experimental and numerical investigation reveals that there exists an optimal range of window profiles that minimizes the error with respect to standard single frequency sweep methods. The minimum error is set by the noise floor of the instrument, suggesting that the accuracy of an optimally windowed chirp signal is directly comparable to that achievable with a standard frequency sweep, while the acquisition time can be reduced by up to two orders of magnitude, for comparable spectral content. Finally, we demonstrate the ability of this optimized signal to provide time- and frequency-resolved rheometric data by studying the fast gelation process of an acid-induced protein gel. The use of optimally windowed chirps enables a robust rheological characterization of a wide range of soft materials undergoing rapid mutation and has the potential to become an invaluable tool for researchers across different disciplines.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
