-
Mechanical complexity of living cells can be mapped onto simple homogeneous equivalents
Authors:
Sebastian Wohlrab,
Sebastian J. Müller,
Stephan Gekle
Abstract:
Biological cells are built up from many different constituents of varying size and stiffness which all contribute to the cell's mechanical properties. Despite this heterogeneity, in the analysis of experimental measurements such as atomic force microscopy or microfluidic characterisation a strongly simplified homogeneous cell is typically assumed and a single elastic modulus is assigned to the ent…
▽ More
Biological cells are built up from many different constituents of varying size and stiffness which all contribute to the cell's mechanical properties. Despite this heterogeneity, in the analysis of experimental measurements such as atomic force microscopy or microfluidic characterisation a strongly simplified homogeneous cell is typically assumed and a single elastic modulus is assigned to the entire cell. This ad-hoc simplification has so far mostly been used without proper justification. Here, we use computer simulations to show that indeed a heterogeneous cell can effectively be replaced by a homogeneous equivalent cell with a volume averaged elastic modulus. To study the validity of this approach, we investigate a hyperelastic cell with a heterogeneous interior under compression as well as in shear and channel flow, mimicking atomic force and microfluidic measurements, respectively. We find that the homogeneous equivalent cell reproduces quantitatively the behavior of its inhomogeneous counterpart, and that this equality is largely independent of the stiffness or spatial distribution of the heterogeneity.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Cell-free layer of red blood cells in a constricted microfluidic channel under steady and time-dependent flow conditions
Authors:
Steffen M. Recktenwald,
Katharina Graessel,
Yazdan Rashidi,
Jann Niklas Steuer,
Thomas John,
Stephan Gekle,
Christian Wagner
Abstract:
Constricted blood vessels in the circulatory system can severely impact the spatiotemporal organization of red blood cells (RBCs) causing various physiological complications. In lab-on-a-chip applications, constrictions are commonly used for cell sorting and plasma separation based on the formation of a cell-free layer (CFL) at the channel boundary. However, such devices usually employ a steady fl…
▽ More
Constricted blood vessels in the circulatory system can severely impact the spatiotemporal organization of red blood cells (RBCs) causing various physiological complications. In lab-on-a-chip applications, constrictions are commonly used for cell sorting and plasma separation based on the formation of a cell-free layer (CFL) at the channel boundary. However, such devices usually employ a steady flow, although time-dependent and pulsatile flow conditions enhance many microfluidic operations and possess significant relevance for in-vitro studies under physiologically relevant flow conditions. In this study, we examine the CFL dynamics in a constricted microchannel under steady and time-dependent flow. Therefore, we develop an image processing routine that allows us to resolve the spatiotemporal evolution of the CFL under time-dependent driving of the flow with arbitrary waveform. First, we perform a characterization of the CFL and the cell-free area (CFA) before and after the constriction under steady flow conditions. Second, we employ our method to study the effect of the hematocrit and the parameters of the flow modulations on the CFL and CFA using a sinusoidal pressure profile. Our results highlight the dominant effects of the RBC concentration and the amplitude of the applied pressure signal predominantly on the CFA dynamics. Moreover, we observe a dampening of the CFA amplitude with increasing hematocrit or decreasing pressure amplitude, and a peculiar phase shift of the CFA oscillations pre- and post-constriction. Complementary numerical simulations reveal how the time-dependent CFA dynamics are coupled with the dynamically changing flow field at the constriction. Due to the increasing demand for investigations and applications under time-dependent flow conditions, our study provides crucial insight into the flow behavior of complex fluids in unsteady microscale flows.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Predicting cell stress and strain during extrusion bioprinting
Authors:
Sebastian Johannes Müller,
Ben Fabry,
Stephan Gekle
Abstract:
Bioprinting of living cells can cause major shape deformations, which may severely affect cell survival and functionality. While the shear stresses occurring during cell flow through the printer nozzle have been quantified to some extent, the extensional stresses occurring as cells leave the nozzle into the free printing strand have been mostly ignored. Here we use Lattice-Boltzmann simulations to…
▽ More
Bioprinting of living cells can cause major shape deformations, which may severely affect cell survival and functionality. While the shear stresses occurring during cell flow through the printer nozzle have been quantified to some extent, the extensional stresses occurring as cells leave the nozzle into the free printing strand have been mostly ignored. Here we use Lattice-Boltzmann simulations together with a finite-element based cell model to study cell deformation at the nozzle exit. Our simulation results are in good qualitative agreement with experimental microscopy images. We show that for cells flowing in the center of the nozzle extensional stresses can be significant, while for cells flowing off-center their deformation is dominated by the shear flow inside the nozzle. From the results of these simulations, we develop two simple methods that only require the printing parameters (nozzle diameter, flow rate, bioink rheology) to (i) accurately predict the maximum cell stress occurring during the 3D bioprinting process and (ii) approximately predict the cell strains caused by the elongational flow at the nozzle exit.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Red blood cell shape transitions and dynamics in time-dependent capillary flows
Authors:
Steffen M. Recktenwald,
Katharina Graessel,
Felix M. Maurer,
Thomas John,
Stephan Gekle,
Christian Wagner
Abstract:
The dynamics of single red blood cells (RBCs) determine microvascular blood flow by adapting their shape to the flow conditions in the narrow vessels. In this study, we explore the dynamics and shape transitions of RBCs on the cellular scale under confined and unsteady flow conditions using a combination of microfluidic experiments and numerical simulations. Tracking RBCs in a comoving frame in ti…
▽ More
The dynamics of single red blood cells (RBCs) determine microvascular blood flow by adapting their shape to the flow conditions in the narrow vessels. In this study, we explore the dynamics and shape transitions of RBCs on the cellular scale under confined and unsteady flow conditions using a combination of microfluidic experiments and numerical simulations. Tracking RBCs in a comoving frame in time-dependent flows reveals that the mean transition time from the symmetric croissant to the off-centered, non-symmetric slipper shape is significantly faster than the opposite shape transition, which exhibits pronounced cell rotations. Complementary simulations indicate that these dynamics depend on the orientation of the RBC membrane in the channel during the time-dependent flow. Moreover, we show how the tank-treading movement of slipper-shaped RBCs in combination with the narrow channel leads to oscillations of the cell's center of mass. The frequency of these oscillations depends on the cell velocity, the viscosity of the surrounding fluid, and the cytosol viscosity. These results provide a potential framework to identify and study pathological changes of RBC properties.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
On the accuracy and performance of the lattice Boltzmann method with 64-bit, 32-bit and novel 16-bit number formats
Authors:
Moritz Lehmann,
Mathias J. Krause,
Giorgio Amati,
Marcello Sega,
Jens Harting,
Stephan Gekle
Abstract:
Fluid dynamics simulations with the lattice Boltzmann method (LBM) are very memory-intensive. Alongside reduction in memory footprint, significant performance benefits can be achieved by using FP32 (single) precision compared to FP64 (double) precision, especially on GPUs. Here, we evaluate the possibility to use even FP16 and Posit16 (half) precision for storing fluid populations, while still car…
▽ More
Fluid dynamics simulations with the lattice Boltzmann method (LBM) are very memory-intensive. Alongside reduction in memory footprint, significant performance benefits can be achieved by using FP32 (single) precision compared to FP64 (double) precision, especially on GPUs. Here, we evaluate the possibility to use even FP16 and Posit16 (half) precision for storing fluid populations, while still carrying arithmetic operations in FP32. For this, we first show that the commonly occurring number range in the LBM is a lot smaller than the FP16 number range. Based on this observation, we develop novel 16-bit formats - based on a modified IEEE-754 and on a modified Posit standard - that are specifically tailored to the needs of the LBM. We then carry out an in-depth characterization of LBM accuracy for six different test systems with increasing complexity: Poiseuille flow, Taylor-Green vortices, Karman vortex streets, lid-driven cavity, a microcapsule in shear flow (utilizing the immersed-boundary method) and finally the impact of a raindrop (based on a Volume-of-Fluid approach). We find that the difference in accuracy between FP64 and FP32 is negligible in almost all cases, and that for a large number of cases even 16-bit is sufficient. Finally, we provide a detailed performance analysis of all precision levels on a large number of hardware microarchitectures and show that significant speedup is achieved with mixed FP32/16-bit.
△ Less
Submitted 31 January, 2022; v1 submitted 16 December, 2021;
originally announced December 2021.
-
A hyperelastic model for simulating cells in flow
Authors:
Sebastian J. Müller,
Franziska Weigl,
Carina Bezold,
Ana Sancho,
Christian Bächer,
Krystyna Albrecht,
Stephan Gekle
Abstract:
In the emerging field of 3D bioprinting, cell damage due to large deformations is considered a main cause for cell death and loss of functionality inside the printed construct. Those deformations, in turn, strongly depend on the mechano-elastic response of the cell to the hydrodynamic stresses experienced during printing. In this work, we present a numerical model to simulate the deformation of bi…
▽ More
In the emerging field of 3D bioprinting, cell damage due to large deformations is considered a main cause for cell death and loss of functionality inside the printed construct. Those deformations, in turn, strongly depend on the mechano-elastic response of the cell to the hydrodynamic stresses experienced during printing. In this work, we present a numerical model to simulate the deformation of biological cells in arbitrary three-dimensional flows. We consider cells as an elastic continuum according to the hyperelastic Mooney-Rivlin model. We then employ force calculations on a tetrahedralized volume mesh. To calibrate our model, we perform a series of FluidFM(R) compression experiments with REF52 cells demonstrating that all three parameters of the Mooney-Rivlin model are required for a good description of the experimental data at very large deformations up to 80%. In addition, we validate the model by comparing to previous AFM experiments on bovine endothelial cells and artificial hydrogel particles. To investigate cell deformation in flow, we incorporate our model into Lattice Boltzmann simulations via an Immersed-Boundary algorithm. In linear shear flows, our model shows excellent agreement with analytical calculations and previous simulation data.
△ Less
Submitted 18 December, 2020; v1 submitted 6 March, 2020;
originally announced March 2020.
-
Frequency-dependent higher-order Stokes singularities near a planar elastic boundary: implications for the hydrodynamics of an active microswimmer near an elastic interface
Authors:
Abdallah Daddi-Moussa-Ider,
Christina Kurzthaler,
Christian Hoell,
Andreas Zöttl,
Mehdi Mirzakhanloo,
Mohammad-Reza Alam,
Andreas M. Menzel,
Hartmut Löwen,
Stephan Gekle
Abstract:
The emerging field of self-driven active particles in fluid environments has recently created significant interest in the biophysics and bioengineering communities owing to their promising future biomedical and technological applications. These microswimmers move autonomously through aqueous media where under realistic situations they encounter a plethora of external stimuli and confining surfaces…
▽ More
The emerging field of self-driven active particles in fluid environments has recently created significant interest in the biophysics and bioengineering communities owing to their promising future biomedical and technological applications. These microswimmers move autonomously through aqueous media where under realistic situations they encounter a plethora of external stimuli and confining surfaces with peculiar elastic properties. Based on a far-field hydrodynamic model, we present an analytical theory to describe the physical interaction and hydrodynamic couplings between a self-propelled active microswimmer and an elastic interface that features resistance toward shear and bending. We model the active agent as a superposition of higher-order Stokes singularities and elucidate the associated translational and rotational velocities induced by the nearby elastic boundary. Our results show that the velocities can be decomposed in shear and bending related contributions which approach the velocities of active agents close to a no-slip rigid wall in the steady limit. The transient dynamics predict that contributions to the velocities of the microswimmer due to bending resistance are generally more pronounced than to shear resistance. Our results provide insight into the control and guidance of artificial and synthetic self-propelling active microswimmers near elastic confinements.
△ Less
Submitted 25 September, 2019; v1 submitted 16 July, 2019;
originally announced July 2019.
-
Anti-margination of microparticles and platelets in the vicinity of branching vessels
Authors:
C. Bächer,
A. Kihm,
L. Schrack,
L. Kaestner,
M. W. Laschke,
C. Wagner,
S. Gekle
Abstract:
We investigate the margination of microparticles/platelets in blood flow through complex geometries typical for in vivo vessel networks: a vessel confluence and a bifurcation. Using 3D Lattice-Boltzmann simulations, we confirm that behind the confluence of two vessels a cell-free layer devoid of red blood cells develops in the channel center. Despite its small size of roughly one micrometer, this…
▽ More
We investigate the margination of microparticles/platelets in blood flow through complex geometries typical for in vivo vessel networks: a vessel confluence and a bifurcation. Using 3D Lattice-Boltzmann simulations, we confirm that behind the confluence of two vessels a cell-free layer devoid of red blood cells develops in the channel center. Despite its small size of roughly one micrometer, this central cell-free layer persists for up to 100 $μ$m after the confluence. Most importantly, we show from simulations that this layer also contains a significant amount of microparticles/platelets and validate this result by in vivo microscopy in mouce venules. At bifurcations, however, a similar effect does not appear and margination is largely unaffected by the geometry. This anti-margination towards the vessel center after a confluence may explain in vivo observations by Woldhuis et al. [Am. J. Physiol. 262, H1217 (1992)] where platelet concentrations near the vessel wall are seen to be much higher on the arteriolar side (containing bifurcations) than on the venular side (containing confluences) of the vascular system.
△ Less
Submitted 11 May, 2018; v1 submitted 26 January, 2018;
originally announced January 2018.
-
3D tomography of cells in micro-channels
Authors:
S. Quint,
A. F. Christ,
A. Guckenberger,
S. Himbert,
L. Kaestner,
S. Gekle,
C. Wagner
Abstract:
We combine confocal imaging, microfluidics and image analysis to record 3D-images of cells in flow. This enables us to recover the full 3D representation of several hundred living cells per minute. Whereas 3D confocal imaging has thus far been limited to steady specimen, we overcome this restriction and present a method to access the 3D shape of moving objects. The key of our principle is a tilted…
▽ More
We combine confocal imaging, microfluidics and image analysis to record 3D-images of cells in flow. This enables us to recover the full 3D representation of several hundred living cells per minute. Whereas 3D confocal imaging has thus far been limited to steady specimen, we overcome this restriction and present a method to access the 3D shape of moving objects. The key of our principle is a tilted arrangement of the micro-channel with respect to the focal plane of the microscope. This forces cells to traverse the focal plane in an inclined manner. As a consequence, individual layers of passing cells are recorded which can then be assembled to obtain the volumetric representation. The full 3D information allows for a detailed comparisons with theoretical and numerical predictions unfeasible with e.g.\ 2D imaging. Our technique is exemplified by studying flowing red blood cells in a micro-channel reflecting the conditions prevailing in the microvasculature. We observe two very different types of shapes: `croissants' and `slippers'. Additionally, we perform 3D numerical simulations of our experiment to confirm the observations. Since 3D confocal imaging of cells in flow has not yet been realized, we see high potential in the field of flow cytometry where cell classification thus far mostly relies on 1D scattering and fluorescence signals.
△ Less
Submitted 17 September, 2017;
originally announced September 2017.
-
Brownian motion near an elastic cell membrane: A theoretical study
Authors:
Abdallah Daddi-Moussa-Ider,
Stephan Gekle
Abstract:
Elastic confinements are an important component of many biological systems and dictate the transport properties of suspended particles under flow. In this chapter, we review the Brownian motion of a particle moving in the vicinity of a living cell whose membrane is endowed with a resistance towards shear and bending. The analytical calculations proceed through the computation of the frequency-depe…
▽ More
Elastic confinements are an important component of many biological systems and dictate the transport properties of suspended particles under flow. In this chapter, we review the Brownian motion of a particle moving in the vicinity of a living cell whose membrane is endowed with a resistance towards shear and bending. The analytical calculations proceed through the computation of the frequency-dependent mobility functions and the application of the fluctuation-dissipation theorem. Elastic interfaces endow the system with memory effects that lead to a long-lived anomalous subdiffusive regime of nearby particles. In the steady limit, the diffusional behavior approaches that near a no-slip hard wall. The analytical predictions are validated and supplemented with boundary-integral simulations.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Hydrodynamic mobility of a solid particle nearby a spherical elastic membrane. I. Axisymmetric motion
Authors:
Abdallah Daddi-Moussa-Ider,
Stephan Gekle
Abstract:
We use the image solution technique to compute the leading order frequency-dependent self-mobility function of a small solid particle moving perpendicular to the surface of a spherical capsule whose membrane possesses shearing and bending rigidities. Comparing our results with those obtained earlier for an infinitely extended planar elastic membrane, we find that membrane curvature leads to the ap…
▽ More
We use the image solution technique to compute the leading order frequency-dependent self-mobility function of a small solid particle moving perpendicular to the surface of a spherical capsule whose membrane possesses shearing and bending rigidities. Comparing our results with those obtained earlier for an infinitely extended planar elastic membrane, we find that membrane curvature leads to the appearance of a prominent additional peak in the mobility. This peak is attributed to the fact that the shear resistance of the curved membrane involves a contribution from surface-normal displacements which is not the case for planar membranes. In the vanishing frequency limit, the particle self-mobility near a no-slip hard sphere is recovered only when the membrane possesses a non-vanishing resistance towards shearing. We further investigate capsule motion, finding that the pair-mobility function is solely determined by membrane shearing properties. Our analytical predictions are validated by fully resolved boundary integral simulations where a very good agreement is obtained.
△ Less
Submitted 14 December, 2016;
originally announced December 2016.
-
Mobility of an axisymmetric particle near an elastic interface
Authors:
Abdallah Daddi-Moussa-Ider,
Maciej Lisicki,
Stephan Gekle
Abstract:
Using a fully analytical theory, we compute the leading order corrections to the translational, rotational and translation-rotation coupling mobilities of an arbitrary axisymmetric particle immersed in a Newtonian fluid moving near an elastic cell membrane that exhibits resistance towards stretching and bending. The frequency-dependent mobility corrections are expressed as general relations involv…
▽ More
Using a fully analytical theory, we compute the leading order corrections to the translational, rotational and translation-rotation coupling mobilities of an arbitrary axisymmetric particle immersed in a Newtonian fluid moving near an elastic cell membrane that exhibits resistance towards stretching and bending. The frequency-dependent mobility corrections are expressed as general relations involving separately the particle's shape-dependent bulk mobility and the shape-independent parameters such as the membrane-particle distance, the particle orientation and the characteristic frequencies associated with shearing and bending of the membrane. This makes the equations applicable to an arbitrary-shaped axisymmetric particle provided that its bulk mobilities are known, either analytically or numerically. For a spheroidal particle, these general relations reduce to simple expressions in terms of the particle's eccentricity. We find that the corrections to the translation-rotation coupling mobility are primarily determined by bending, whereas shearing manifests itself in a more pronounced way in the rotational mobility. We demonstrate the validity of the analytical approximations by a detailed comparison with boundary integral simulations of a truly extended spheroidal particle. They are found to be in a good agreement over the whole range of applied frequencies.
△ Less
Submitted 10 December, 2016; v1 submitted 12 October, 2016;
originally announced October 2016.
-
Clustering of microscopic particles in constricted blood flow
Authors:
Christian Bächer,
Lukas Schrack,
Stephan Gekle
Abstract:
A mixed suspension of red blood cells (RBCs) and microparticles flows through a cylindrical channel with a constriction mimicking a stenosed blood vessel. Our three-dimensional Lattice-Boltzmann simulations show that the RBCs are depleted right ahead and after the constriction. Although the RBC mean concentration (hematocrit) is 16.5% or 23.7%, their axial concentration profile is very similar to…
▽ More
A mixed suspension of red blood cells (RBCs) and microparticles flows through a cylindrical channel with a constriction mimicking a stenosed blood vessel. Our three-dimensional Lattice-Boltzmann simulations show that the RBCs are depleted right ahead and after the constriction. Although the RBC mean concentration (hematocrit) is 16.5% or 23.7%, their axial concentration profile is very similar to that of isolated tracer particles flowing along the central axis. Most importantly, however, we find that the stiff microparticles exhibit the opposite behavior. Arriving on a marginated position near the channel wall, they can pass through the constriction only if they find a suitable gap to dip into the dense plug of RBCs occupying the channel center. This leads to a prolonged dwell time and, as a consequence, to a pronounced increase in microparticle concentration right in front of the constriction. For biochemically active particles such as drug delivery agents or activated platelets this clustering may lead to physiologically relevant hot spots of biochemical activity.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
Cross-stream transport of asymmetric particles driven by oscillating shear
Authors:
Matthias Laumann,
Paul Bauknecht,
Stephan Gekle,
Diego Kienle,
Walter Zimmermann
Abstract:
We study the dynamics of asymmetric, deformable particles in oscillatory, linear shear flow. By simulating the motion of a dumbbell, a ring polymer, and a capsule we show that cross-stream migration occurs for asymmetric elastic particles even in linear shear flow if the shear rate varies in time. The migration is generic as it does not depend on the particle dimension. Importantly, the migration…
▽ More
We study the dynamics of asymmetric, deformable particles in oscillatory, linear shear flow. By simulating the motion of a dumbbell, a ring polymer, and a capsule we show that cross-stream migration occurs for asymmetric elastic particles even in linear shear flow if the shear rate varies in time. The migration is generic as it does not depend on the particle dimension. Importantly, the migration velocity and migration direction are robust to variations of the initial particle orientation, making our proposed scheme suitable for sorting particles with asymmetric material properties.
△ Less
Submitted 19 August, 2016;
originally announced August 2016.
-
Hydrodynamic interaction between particles near elastic interfaces
Authors:
Abdallah Daddi-Moussa-Ider,
Stephan Gekle
Abstract:
We present an analytical calculation of the hydrodynamic interaction between two spherical particles near an elastic interface such as a cell membrane. The theory predicts the frequency dependent self- and pair-mobilities accounting for the finite particle size up to the 5th order in the ratio between particle diameter and wall distance as well as between diameter and interparticle distance. We fi…
▽ More
We present an analytical calculation of the hydrodynamic interaction between two spherical particles near an elastic interface such as a cell membrane. The theory predicts the frequency dependent self- and pair-mobilities accounting for the finite particle size up to the 5th order in the ratio between particle diameter and wall distance as well as between diameter and interparticle distance. We find that particle motion towards a membrane with pure bending resistance always leads to mutual repulsion similar as in the well-known case of a hard-wall. In the vicinity of a membrane with shearing resistance, however, we observe an attractive interaction in a certain parameter range which is in contrast to the behavior near a hard wall. This attraction might facilitate surface chemical reactions. Furthermore, we show that there exists a frequency range in which the pair-mobility for perpendicular motion exceeds its bulk value, leading to short-lived superdiffusive behavior. Using the analytical particle mobilities we compute collective and relative diffusion coefficients. The appropriateness of the approximations in our analytical results is demonstrated by corresponding boundary integral simulations which are in excellent agreement with the theoretical predictions.
△ Less
Submitted 21 June, 2016;
originally announced June 2016.
-
Particle mobility between two planar elastic membranes: Brownian motion and membrane deformation
Authors:
Abdallah Daddi-Moussa-Ider,
Achim Guckenberger,
Stephan Gekle
Abstract:
We study the motion of a solid particle immersed in a Newtonian fluid and confined between two parallel elastic membranes possessing shear and bending rigidity. The hydrodynamic mobility depends on the frequency of the particle motion due to the elastic energy stored in the membrane. Unlike the single-membrane case, a coupling between shearing and bending exists. The commonly used approximation of…
▽ More
We study the motion of a solid particle immersed in a Newtonian fluid and confined between two parallel elastic membranes possessing shear and bending rigidity. The hydrodynamic mobility depends on the frequency of the particle motion due to the elastic energy stored in the membrane. Unlike the single-membrane case, a coupling between shearing and bending exists. The commonly used approximation of superposing two single-membrane contributions is found to give reasonable results only for motions in the parallel, but not in the perpendicular direction. We also compute analytically the membrane deformation resulting from the motion of the particle, showing that the presence of the second membrane reduces deformation. Using the fluctuation-dissipation theorem we compute the Brownian motion of the particle, finding a long-lasting subdiffusive regime at intermediate time scales. We finally assess the accuracy of the employed point-particle approximation via boundary-integral simulations for a truly extended particle. They are found to be in excellent agreement with the analytical predictions.
△ Less
Submitted 20 May, 2016;
originally announced May 2016.
-
Long-lived anomalous thermal diffusion induced by elastic cell membranes on nearby particles
Authors:
Abdallah Daddi-Moussa-Ider,
Achim Guckenberger,
Stephan Gekle
Abstract:
The physical approach of a small particle (virus, medical drug) to the cell membrane represents the crucial first step before active internalization and is governed by thermal diffusion. Using a fully analytical theory we show that the stretching and bending of the elastic membrane by the approaching particle induces a memory in the system which leads to anomalous diffusion, even though the partic…
▽ More
The physical approach of a small particle (virus, medical drug) to the cell membrane represents the crucial first step before active internalization and is governed by thermal diffusion. Using a fully analytical theory we show that the stretching and bending of the elastic membrane by the approaching particle induces a memory in the system which leads to anomalous diffusion, even though the particle is immersed in a purely Newtonian liquid. For typical cell membranes the transient subdiffusive regime extends beyond 10 ms and can enhance residence times and possibly binding rates up to 50\%. Our analytical predictions are validated by numerical simulations.
△ Less
Submitted 20 January, 2016; v1 submitted 9 January, 2016;
originally announced January 2016.
-
Non-continuous Froude number scaling for the closure depth of a cylindrical cavity
Authors:
Stephan Gekle,
Arjan van der Bos,
Raymond Bergmann,
Devaraj van der Meer,
Detlef Lohse
Abstract:
A long, smooth cylinder is dragged through a water surface to create a cavity with an initially cylindrical shape. This surface void then collapses due to the hydrostatic pressure, leading to a rapid and axisymmetric pinch-off in a single point. Surprisingly, the depth at which this pinch-off takes place does not follow the expected Froude$^{1/3}$ power-law. Instead, it displays two distinct sca…
▽ More
A long, smooth cylinder is dragged through a water surface to create a cavity with an initially cylindrical shape. This surface void then collapses due to the hydrostatic pressure, leading to a rapid and axisymmetric pinch-off in a single point. Surprisingly, the depth at which this pinch-off takes place does not follow the expected Froude$^{1/3}$ power-law. Instead, it displays two distinct scaling regimes separated by discrete jumps, both in experiment and in numerical simulations (employing a boundary integral code). We quantitatively explain the above behavior as a capillary waves effect. These waves are created when the top of the cylinder passes the water surface. Our work thus gives further evidence for the non-universality of the void collapse.
△ Less
Submitted 20 December, 2006;
originally announced December 2006.
-
Opinion dynamics in a three-choice system
Authors:
S. Gekle,
S. Galam,
L. Peliti
Abstract:
We generalize Galam's model of opinion spreading by introducing three competing choices. At each update, the population is randomly divided in groups of three agents, whose members adopt the opinion of the local majority. In the case of a tie, the local group adopts opinion A, B or C with probabilities alpha, beta and (1-alpha-beta) respectively. We derive the associated phase diagrams and dynam…
▽ More
We generalize Galam's model of opinion spreading by introducing three competing choices. At each update, the population is randomly divided in groups of three agents, whose members adopt the opinion of the local majority. In the case of a tie, the local group adopts opinion A, B or C with probabilities alpha, beta and (1-alpha-beta) respectively. We derive the associated phase diagrams and dynamics by both analytical means and simulations. Polarization is always reached within very short time scales. We point out situations in which an initially very small minority opinion can invade the whole system.
△ Less
Submitted 22 April, 2005; v1 submitted 11 April, 2005;
originally announced April 2005.
