-
Strain-induced dynamic control over the population of quantum emitters in two-dimensional materials
Authors:
Giuseppe Ronco,
Abel Martínez-Suárez,
Davide Tedeschi,
Matteo Savaresi,
Aurelio Hierro-Rodríguez,
Stephen McVitie,
Sandra Stroj,
Johannes Aberl,
Mortiz Brehm,
Victor M. García-Suárez,
Michele B. Rota,
Pablo AlonsoGonzález,
Javier Martín-Sánchez,
Rinaldo Trotta
Abstract:
The discovery of quantum emitters (QEs) in two-dimensional materials (2D) has triggered a surge of research to assess their suitability for quantum photonics. While their microscopic origin is still the subject of intense studies, position-controlled QEs are routinely fabricated using static strain gradients, which are used to drive excitons towards localized regions of the crystal where quantum l…
▽ More
The discovery of quantum emitters (QEs) in two-dimensional materials (2D) has triggered a surge of research to assess their suitability for quantum photonics. While their microscopic origin is still the subject of intense studies, position-controlled QEs are routinely fabricated using static strain gradients, which are used to drive excitons towards localized regions of the crystal where quantum light emission takes place. However, the use of strain in a dynamic fashion to control the brightness of single-photon sources in 2D materials has not been explored so far. In this work, we address this challenge by introducing a novel hybrid semiconductorpiezoelectric device in which WSe2 monolayers are integrated onto piezoelectric pillars that provide both static and dynamic strains. The static strains are first used to induce the formation of QEs, whose emission shows photon anti-bunching. Their energy and brightness are then controlled via the application of voltages to the piezoelectric pillars. Numerical simulations combined with drift-diffusion equations show that these effects are due to a strain-induced modification of the confining-potential landscape, which in turn leads to a net redistribution of excitons among the different QEs. Our work provides a method to dynamically control the brightness of single photon sources based on 2D materials.
△ Less
Submitted 18 October, 2024; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Thermoelectric response enhanced by surface/edge states in physical nanogaps
Authors:
Víctor M. García-Suárez
Abstract:
We propose here a feasible and effective design of new thermoelectric systems based on physical gaps in nanoscale junctions. We show that, depending on the type of features, i.e. the character of surface/edge states, on both sides of the gap, it is possible to achieve rather high figures of merit. In particular, we show that for configurations that have localized states at the surfaces/edges, whic…
▽ More
We propose here a feasible and effective design of new thermoelectric systems based on physical gaps in nanoscale junctions. We show that, depending on the type of features, i.e. the character of surface/edge states, on both sides of the gap, it is possible to achieve rather high figures of merit. In particular, we show that for configurations that have localized states at the surfaces/edges, which translate into sharp resonances in the transmission, it is possible to achieve large Seebeck coefficients and figures of merit by carefully tuning their energy and their coupling to other states. We calculate the thermoelectric coefficients as a function of different parameters and find non-obvious behaviours, like the existence of a certain coupling between the localized and bulk states for which these quantities have a maximum. The highest Seebeck coefficients and figures of merit are achieved for symmetric junctions, which have the same coupling between the localized state and the bulk states on both sides of the gap. The features and trends of the thermoelectric properties and their change with various parameters that we find here cannot only be applied to systems with nanogaps, but also to many other nanoscale junctions, such as e.g. those that have surface states or states localized near the contacts between the nanoscale object and the electrodes. The model presented here can therefore be used to characterize and predict the thermoelectric properties of many different nanoscale junctions and can also serve as a guide for studying other systems. These results pave then the way for the design and fabrication of stable next-generation thermoelectric devices with robust features and improved performances.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
SIESTA: recent developments and applications
Authors:
Alberto García,
Nick Papior,
Arsalan Akhtar,
Emilio Artacho,
Volker Blum,
Emanuele Bosoni,
Pedro Brandimarte,
Mads Brandbyge,
J. I. Cerdá,
Fabiano Corsetti,
Ramón Cuadrado,
Vladimir Dikan,
Jaime Ferrer,
Julian Gale,
Pablo García-Fernández,
V. M. García-Suárez,
Sandra García,
Georg Huhs,
Sergio Illera,
Richard Korytár,
Peter Koval,
Irina Lebedeva,
Lin Lin,
Pablo López-Tarifa,
Sara G. Mayo
, et al. (11 additional authors not shown)
Abstract:
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pse…
▽ More
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pseudopotentials, and a real-space grid for the representation of charge density and potentials and the computation of their associated matrix elements. Here we describe the more recent implementations on top of that core scheme, which include: full spin-orbit interaction, non-repeated and multiple-contact ballistic electron transport, DFT+U and hybrid functionals, time-dependent DFT, novel reduced-scaling solvers, density-functional perturbation theory, efficient Van der Waals non-local density functionals, and enhanced molecular-dynamics options. In addition, a substantial effort has been made in enhancing interoperability and interfacing with other codes and utilities, such as Wannier90 and the second-principles modelling it can be used for, an AiiDA plugin for workflow automatization, interface to Lua for steering SIESTA runs, and various postprocessing utilities. SIESTA has also been engaged in the Electronic Structure Library effort from its inception, which has allowed the sharing of various low level libraries, as well as data standards and support for them, in particular the PSML definition and library for transferable pseudopotentials, and the interface to the ELSI library of solvers. Code sharing is made easier by the new open-source licensing model of the program. This review also presents examples of application of the capabilities of the code, as well as a view of on-going and future developments.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
The CECAM Electronic Structure Library and the modular software development paradigm
Authors:
Micael J. T. Oliveira,
Nick Papior,
Yann Pouillon,
Volker Blum,
Emilio Artacho,
Damien Caliste,
Fabiano Corsetti,
Stefano de Gironcoli,
Alin M. Elena,
Alberto Garcia,
Victor M. Garcia-Suarez,
Luigi Genovese,
William P. Huhn,
Georg Huhs,
Sebastian Kokott,
Emine Kucukbenli,
Ask H. Larsen,
Alfio Lazzaro,
Irina V. Lebedeva,
Yingzhou Li,
David Lopez-Duran,
Pablo Lopez-Tarifa,
Martin Luders,
Miguel A. L. Marques,
Jan Minar
, et al. (12 additional authors not shown)
Abstract:
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu…
▽ More
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers.
△ Less
Submitted 24 June, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Electronics without bridging components
Authors:
V. M. García-Suárez
Abstract:
We propose a new paradigm of electronic devices based only on two electrodes separated by a gap, i.e. without any functional element bridging them. We use a tight-binding model to show that, depending on the type of material of the electrodes and its structure, several electronic functionalities can be achieved: ohmic behaviour, rectification, negative differential resistance, spin-filtering and m…
▽ More
We propose a new paradigm of electronic devices based only on two electrodes separated by a gap, i.e. without any functional element bridging them. We use a tight-binding model to show that, depending on the type of material of the electrodes and its structure, several electronic functionalities can be achieved: ohmic behaviour, rectification, negative differential resistance, spin-filtering and magnetoresistance. In particular, we show that it is possible to deliver a given functionality by changing the coupling between the surface and bulk states and between the surface states across the gap, which dramatically changes the current-voltage characteristics. These results prove that it is possible to have functional electronic and spintronic elements on the nanoscale without having physical components bridging the electrodes.
△ Less
Submitted 20 January, 2020; v1 submitted 29 July, 2019;
originally announced July 2019.
-
Spin signatures in the electrical response of graphene nanogaps
Authors:
V. M. Garcia-Suarez,
A. Garcia-Fuente,
D. Carrascal,
E. Burzuri,
M. Koole,
H. S. J. van der Zant,
M. El Abbassi,
M. Calame,
J. Ferrer
Abstract:
We analyse the electrical response of narrow graphene nanogaps in search for transport signatures stemming from spin-polarized edge states. We find that the electrical transport across graphene nanogaps having perfectly defined zigzag edges does not carry any spin-related signature. We also analyse the magnetic and electrical properties of nanogaps whose electrodes have wedges that possibly occur…
▽ More
We analyse the electrical response of narrow graphene nanogaps in search for transport signatures stemming from spin-polarized edge states. We find that the electrical transport across graphene nanogaps having perfectly defined zigzag edges does not carry any spin-related signature. We also analyse the magnetic and electrical properties of nanogaps whose electrodes have wedges that possibly occur in the currently fabricated nanogaps. These wedges can host spin polarized wedge low-energy states due to the bipartite nature of the graphene lattice. We find that these spin-polarized low-energy modes give rise to low-voltage signatures in the differential conductance and to distinctive features in the stability diagrams. These are caused by fully spin-polarized currents.
△ Less
Submitted 19 September, 2018;
originally announced September 2018.
-
Mechanically Controlled Quantum Interference in Graphene Break Junctions
Authors:
Sabina Caneva,
Pascal Gehring,
Víctor M. García-Suárez,
Amador García-Fuente,
Davide Stefani,
Ignacio J. Olavarria-Contreras,
Jaime Ferrer,
Cees Dekker,
Herre S. J. van der Zant
Abstract:
The ability to detect and distinguish quantum interference signatures is important for both fundamental research and for the realization of devices including electron resonators, interferometers and interference-based spin filters. Consistent with the principles of subwavelength optics, the wave nature of electrons can give rise to various types of interference effects, such as Fabry-Pérot resonan…
▽ More
The ability to detect and distinguish quantum interference signatures is important for both fundamental research and for the realization of devices including electron resonators, interferometers and interference-based spin filters. Consistent with the principles of subwavelength optics, the wave nature of electrons can give rise to various types of interference effects, such as Fabry-Pérot resonances, Fano resonances and the Aharonov-Bohm effect. Quantum-interference conductance oscillations have indeed been predicted for multiwall carbon nanotube shuttles and telescopes, and arise from atomic-scale displacements between the inner and outer tubes. Previous theoretical work on graphene bilayers indicates that these systems may display similar interference features as a function of the relative position of the two sheets. Experimental verification is, however, still lacking. Graphene nanoconstrictions represent an ideal model system to study quantum transport phenomena due to the electronic coherence and the transverse confinement of the carriers. Here, we demonstrate the fabrication of bowtie-shaped nanoconstrictions with mechanically controlled break junctions (MCBJs) made from a single layer of graphene. We find that their electrical conductance displays pronounced oscillations at room temperature, with amplitudes that modulate over an order of magnitude as a function of sub-nanometer displacements. Surprisingly, the oscillations exhibit a period larger than the graphene lattice constant. Charge-transport calculations show that the periodicity originates from a combination of quantum-interference and lattice-commensuration effects of two graphene layers that slide across each other. Our results provide direct experimental observation of Fabry-Pérot-like interference of electron waves that are partially reflected/transmitted at the edges of the graphene bilayer overlap region.
△ Less
Submitted 5 October, 2018; v1 submitted 15 March, 2018;
originally announced March 2018.
-
Control of thermoelectric properties of phase-coherent molecular wires
Authors:
Víctor M. García-Suarez,
Colin J. Lambert,
David Zs. Manrique,
Thomas Wandlowski
Abstract:
We demonstrate how redox control of intra-molecular quantum interference in phase-coherent molecular wires can be used to enhance the thermopower (Seebeck coefficient) S and thermoelectric figure of merit ZT of single molecules attached to nanogap electrodes. Using first principles theory, we study the thermoelectric properties of a family of nine molecules, which consist of dithiol-terminated oli…
▽ More
We demonstrate how redox control of intra-molecular quantum interference in phase-coherent molecular wires can be used to enhance the thermopower (Seebeck coefficient) S and thermoelectric figure of merit ZT of single molecules attached to nanogap electrodes. Using first principles theory, we study the thermoelectric properties of a family of nine molecules, which consist of dithiol-terminated oligo(phenylene-ethynylenes) (OPEs) containing various central units. Uniquely, one molecule of this family possesses a conjugated acene-based central backbone attached via triple bonds to terminal sulfur atoms bound to gold electrodes and incorporates a fully conjugated hydroquinone central unit. We demonstrate that both S and the electronic contribution ZelT to the figure of merit ZT can be dramatically enhanced by oxidizing the hydroquinone to yield a second molecule, which possesses a cross-conjugated anthraquinone central unit. This enhancement originates from the conversion of the pi-conjugation in the former to cross-conjugation in the latter, which promotes the appearance of a sharp anti-resonance at the Fermi energy. Comparison with thermoelectric properties of the remaining seven conjugated molecules demonstrates that such large values of S and ZelT are unprecedented. We also evaluate the phonon contribution to the thermal conductance, which allows us to compute the full figure of merit ZT = ZelT/(1 + \k{appa}p/\k{appa}el), where \k{appa}p is the phonon contribution to the thermal conductance and \k{appa}el is the electronic contribution. For unstructured gold electrodes, \k{appa}p/\k{appa}el >> 1 and therefore strategies to reduce \k{appa}p are needed to realise the highest possible figure of merit.
△ Less
Submitted 9 September, 2015;
originally announced September 2015.
-
Effects of asymmetric contacts on single molecule conductances of HS(CH2)nCOOH in nano-electrical junctions
Authors:
S. Martin,
D. Manrique,
V. M. Garcia-Suarez,
W. Haiss,
S. J. Higgins,
C. J. Lambert,
R. J. Nichols
Abstract:
A scanning tunnelling microscope has been used to determine the conductance of single molecular wires with the configuration X-bridge-X, X-bridge-Y and Y-bridge-Y (X = thiol terminus and Y = COOH). We find that for molecular wires with mixed functional groups (X-bridge-Y) the single molecule conductance decreases with respect to the comparable symmetric molecules. These differences are confirmed b…
▽ More
A scanning tunnelling microscope has been used to determine the conductance of single molecular wires with the configuration X-bridge-X, X-bridge-Y and Y-bridge-Y (X = thiol terminus and Y = COOH). We find that for molecular wires with mixed functional groups (X-bridge-Y) the single molecule conductance decreases with respect to the comparable symmetric molecules. These differences are confirmed by theoretical computations based on a combination of density functional theory and the non-equilibrium Green functions formalism. This study demonstrates that the apparent contact resistance, as well as being highly sensitive to the type of the anchoring group is also strongly influenced by contact-asymmetry of the single molecular junction which in this case decreases the transmission. This highlights that contact asymmetry is a significant factor to be considered when evaluating nano-electrical junctions incorporating single molecules.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
GOLLUM: a next-generation simulation tool for electron, thermal and spin transport
Authors:
J. Ferrer,
C. J. Lambert,
V. M. Garcia-Suarez,
D. Zs. Manrique,
D. Visontai,
L. Oroszlany,
R. Rodriguez-Ferradas,
I. Grace,
S. W. D. Bailey,
K. Gillemot,
H. Sadeghi,
L. A. Algharagholy
Abstract:
We have developed an efficient simulation tool 'GOLLUM' for the computation of electrical, spin and thermal transport characteristics of complex nanostructures. The new multi-scale, multi-terminal tool addresses a number of new challenges and functionalities that have emerged in nanoscale-scale transport over the past few years. To illustrate the flexibility and functionality of GOLLUM, we present…
▽ More
We have developed an efficient simulation tool 'GOLLUM' for the computation of electrical, spin and thermal transport characteristics of complex nanostructures. The new multi-scale, multi-terminal tool addresses a number of new challenges and functionalities that have emerged in nanoscale-scale transport over the past few years. To illustrate the flexibility and functionality of GOLLUM, we present a range of demonstrator calculations encompassing charge, spin and thermal transport, corrections to density functional theory such as LDA+U and spectral adjustments, transport in the presence of non-collinear magnetism, the quantum-Hall effect, Kondo and Coulomb blockade effects, finite-voltage transport, multi-terminal transport, quantum pumps, superconducting nanostructures, environmental effects and pulling curves and conductance histograms for mechanically-controlled-break-junction experiments.
△ Less
Submitted 17 February, 2015;
originally announced February 2015.
-
Stability and properties of high-buckled two-dimensional tin and lead
Authors:
Pablo Rivero,
Jia-An Yan,
Victor M. Garcia-Suarez,
Jaime Ferrer,
Salvador Barraza-Lopez
Abstract:
In realizing practical non-trivial topological electronic phases stable structures need to be determined first. Tin and lead do stabilize an optimal two-dimensional high-buckled phase --a hexagonal-close packed bilayer structure with nine-fold atomic coordination-- and they do not stabilize topological fullerenes, as demonstrated by energetics, phonon dispersion curves, and the structural optimiza…
▽ More
In realizing practical non-trivial topological electronic phases stable structures need to be determined first. Tin and lead do stabilize an optimal two-dimensional high-buckled phase --a hexagonal-close packed bilayer structure with nine-fold atomic coordination-- and they do not stabilize topological fullerenes, as demonstrated by energetics, phonon dispersion curves, and the structural optimization of finite-size samples. The high-buckled phases are metallic due to their high atomic coordination. The optimal structure of fluorinated tin lacks three-fold symmetry and it stabilizes small samples too. It develops two oblate conical valleys on the first Brillouin zone coupling valley, sublattice, and spin degrees of freedom with a novel $τ_zσ_xs_x$ term, thus making it a new 2D platform for valleytronics.
△ Less
Submitted 20 November, 2014;
originally announced November 2014.
-
Jahn-Teller distortion induced magnetic phase transition in cubic BaFeO$_{3}$
Authors:
Gul Rahman,
Juliana M. Morbec,
Rubén Ferradás,
Víctor M. García-Suárez
Abstract:
Using density functional theory (DFT) with local density approximation (LDA) and generalized gradient approximation (GGA) correlation functionals, the electronic and magnetic structures of cubic BaFeO$_{3}$ in the ferromagnetic (FM) and antiferromagnetic (AFM) states are studied. Our LDA/GGA and LDA$+U$/GGA$+U$ results show that cubic BFO has a FM ground state, in agreement with recent experimenta…
▽ More
Using density functional theory (DFT) with local density approximation (LDA) and generalized gradient approximation (GGA) correlation functionals, the electronic and magnetic structures of cubic BaFeO$_{3}$ in the ferromagnetic (FM) and antiferromagnetic (AFM) states are studied. Our LDA/GGA and LDA$+U$/GGA$+U$ results show that cubic BFO has a FM ground state, in agreement with recent experimental works. Two types of Jahn-Teller (JT) distortions, denoted as JT1 and JT2, are considered. We find FM to ferrimagnetic (FIM) and FM to AFM magnetic phase transitionn in the JT1 and JT2 type of distortions, respectively. Larger strains are required for the FM-AFM transition as compared to the FM-FIM. DFT$+U$ calculations also show that the magnetic moments dramatically decrease at large strains due to strong overlapping between the Fe and O atoms. The origins of these transitions is discussed in terms of a competition between double exchange and superexchange interactions. Oxygen and Fe displacements are therefore responsible for the magnetic phase transitions and the reduction of the magnetic moments.
△ Less
Submitted 13 October, 2013;
originally announced October 2013.
-
Impact of Fano and Breit-Wigner resonances in the thermoelectric properties of nanoscale junctions
Authors:
V. M. García-Suárez,
R. Ferradás,
J. Ferrer
Abstract:
We show that the thermoelectric properties of nanoscale junctions featuring states near the Fermi level strongly depend on the type of resonance generated by such states, which can be either Fano or Breit-Wigner-like. We give general expressions for the thermoelectric coefficients generated by the two types of resonances and calculate the thermoelectric properties of these systems, which encompass…
▽ More
We show that the thermoelectric properties of nanoscale junctions featuring states near the Fermi level strongly depend on the type of resonance generated by such states, which can be either Fano or Breit-Wigner-like. We give general expressions for the thermoelectric coefficients generated by the two types of resonances and calculate the thermoelectric properties of these systems, which encompass most nanoelectronics junctions. We include simulations of real junctions where metalloporphyrin molecules bridge gold electrodes and prove that for some metallic elements the thermoelectric properties show a large variability. We find that the thermopower and figure of merit are largely enhanced when the resonance gets close to the Fermi level and reach values much higher than typical values found in other nanoscale junctions. The specific value and temperature dependence are determined by a series of factors such as the strength of the coupling between the state and other molecular states, the symmetry of the state, the strength of the coupling between the molecule and the leads and the spin filtering behavior of the junction.
△ Less
Submitted 16 December, 2013; v1 submitted 10 July, 2013;
originally announced July 2013.
-
Universality in the transport response of molecular wires physisorbed onto graphene electrodes
Authors:
V. M. García-Suárez,
R. Ferradás,
D. Carrascal,
J. Ferrer
Abstract:
We analyze the low-voltage transport response of large molecular wires bridging graphene electrodes, where the molecules are physisorbed onto the graphene sheets by planar anchor groups. In our study, the sheets are pulled away to vary the gap length and the relative atomic positions. The molecular wires are also translated in directions parallel and perpendicular to the sheets. We show that the e…
▽ More
We analyze the low-voltage transport response of large molecular wires bridging graphene electrodes, where the molecules are physisorbed onto the graphene sheets by planar anchor groups. In our study, the sheets are pulled away to vary the gap length and the relative atomic positions. The molecular wires are also translated in directions parallel and perpendicular to the sheets. We show that the energy position of the Breit-Wigner molecular resonances is universal for a given molecule, in the sense that it is independent of the details of the graphene edges, gaps lengths or of the molecule positions. We discuss the need to converge carefully the k-sampling to provide reasonable values of the conductance.
△ Less
Submitted 20 June, 2013; v1 submitted 6 March, 2013;
originally announced March 2013.
-
Stabilizing intrinsic defects in SnO$_{2}$
Authors:
Gul Rahman,
Naseem Ud Din,
Victor M. Garcia-Suarez,
Erjun Kan
Abstract:
TThe magnetism and electronic structure of Li-doped SnO$_{2}$ are investigated using first-principles LDA/LDA$+U$ calculations. We find that Li induces magnetism in SnO$_{2}$ when doped at the Sn site but becomes non-magnetic when doped at the O and interstitial sites. The calculated formation energies show that Li prefers the Sn site as compared with the O site, in agreement with previous experim…
▽ More
TThe magnetism and electronic structure of Li-doped SnO$_{2}$ are investigated using first-principles LDA/LDA$+U$ calculations. We find that Li induces magnetism in SnO$_{2}$ when doped at the Sn site but becomes non-magnetic when doped at the O and interstitial sites. The calculated formation energies show that Li prefers the Sn site as compared with the O site, in agreement with previous experimental works. The interaction of Li with native defects (Sn V$_\mathrm{Sn}$ and O V$_\mathrm{O}$ vacancies) is also studied, and we find that Li not only behaves as a spin polarizer, but also a vacancy stabilizer, i.e. Li significantly reduces the defect formation energies of the native defects and helps the stabilization of magnetic oxygen vacancies. The electronic densities of states reveals that these systems, where the Fermi level touches the conduction (valence) band, are non-magnetic (magnetic).cancies. The electronic densities of states reveal that those systems, where the Fermi levels touch the conduction (valence) band, are non-magnetic (magnetic).
△ Less
Submitted 2 May, 2013; v1 submitted 20 October, 2012;
originally announced October 2012.
-
Intrinsic Magnetism in Nanosheets of SnO$_{2}$: A First-principles Study
Authors:
Gul Rahman,
Victor M. Garcia-Suarez,
J. M. Morbec
Abstract:
We propose intrinsic magnetism in nanosheets of SnO$_{2}$, based on first-principles calculations. The electronic structure and spin density reveal that $p$ orbitals of the oxygen atoms, surrounding Sn vacancies, have a non itinerant nature which gives birth to localized magnetism. A giant decrease in defect formation energies of Sn vacancies in nanosheets is observed. We, therefore, believe that…
▽ More
We propose intrinsic magnetism in nanosheets of SnO$_{2}$, based on first-principles calculations. The electronic structure and spin density reveal that $p$ orbitals of the oxygen atoms, surrounding Sn vacancies, have a non itinerant nature which gives birth to localized magnetism. A giant decrease in defect formation energies of Sn vacancies in nanosheets is observed. We, therefore, believe that native defects can be stabilized without any chemical doping. Nanosheets of different thicknesses are also studied, and it is found that it is easier to create vacancies, which are magnetic, at the surface of the sheets. SnO$_{2}$ nanosheets can, therefore, open new opportunities in the field of spintronics.
△ Less
Submitted 11 October, 2012;
originally announced October 2012.
-
Non-equilibrium transport response from equilibrium transport theory
Authors:
V. M. García-Suárez,
J. Ferrer
Abstract:
We propose a simple scheme that describes accurately essential non-equilibrium effects in nanoscale electronics devices using equilibrium transport theory. The scheme, which is based on the alignment and dealignment of the junction molecular orbitals with the shifted Fermi levels of the electrodes, simplifies drastically the calculation of current-voltage characteristics compared to typical non-eq…
▽ More
We propose a simple scheme that describes accurately essential non-equilibrium effects in nanoscale electronics devices using equilibrium transport theory. The scheme, which is based on the alignment and dealignment of the junction molecular orbitals with the shifted Fermi levels of the electrodes, simplifies drastically the calculation of current-voltage characteristics compared to typical non-equilibrium algorithms. We probe that the scheme captures a number of non-trivial transport phenomena such as the negative differential resistance and rectification effects. It applies to those atomic-scale junctions whose relevant states for transport are spatially placed on the contact atoms or near the electrodes.
△ Less
Submitted 23 September, 2012;
originally announced September 2012.
-
Symmetry-induced interference effects in metalloporphyrin wires
Authors:
Rubén Ferradás,
Víctor M. García-Suárez,
Jaime Ferrer
Abstract:
Organo-metallic molecular structures where a single metallic atom is embedded in the organic backbone are ideal systems to study the effect of strong correlations on their electronic structure. In this work we calculate the electronic and transport properties of a series of metalloporphyrin molecules sandwiched by gold electrodes using a combination of density functional theory and scattering theo…
▽ More
Organo-metallic molecular structures where a single metallic atom is embedded in the organic backbone are ideal systems to study the effect of strong correlations on their electronic structure. In this work we calculate the electronic and transport properties of a series of metalloporphyrin molecules sandwiched by gold electrodes using a combination of density functional theory and scattering theory. The impact of strong correlations at the central metallic atom is gauged by comparing our results obtained using conventional DFT and DFT+U approaches. The zero bias transport properties may or may not show spin-filtering behavior, depending on the nature of the d state closest to the Fermi energy. The type of d state depends on the metallic atom and gives rise to interference effects that produce different Fano features. The inclusion of the U term opens a gap between the d states and changes qualitatively the conductance and spin-filtering behavior in some of the molecules. We explain the origin of the quantum interference effects found as due to the symmetry-dependent coupling between the d states and other molecular orbitals and propose the use of these systems as nanoscale chemical sensors. We also demonstrate that an adequate treatment of strong correlations is really necessary to correctly describe the transport properties of metalloporphyrins and similar molecular magnets.
△ Less
Submitted 15 August, 2012;
originally announced August 2012.
-
Impact of edge shape on the functionalities of graphene-based single-molecule electronics devices
Authors:
D. Carrascal,
V. M. García-Suárez,
J. Ferrer
Abstract:
We present an ab-initio analysis of the impact of edge shape and graphene-molecule anchor coupling on the electronic and transport functionalities of graphene-based molecular electronics devices. We analyze how Fano-like resonances, spin filtering and negative differential resistance effects may or may not arise by modifying suitably the edge shapes and the terminating groups of simple organic mol…
▽ More
We present an ab-initio analysis of the impact of edge shape and graphene-molecule anchor coupling on the electronic and transport functionalities of graphene-based molecular electronics devices. We analyze how Fano-like resonances, spin filtering and negative differential resistance effects may or may not arise by modifying suitably the edge shapes and the terminating groups of simple organic molecules. We show that the spin filtering effect is a consequence of the magnetic behavior of zigzag-terminated edges, which is enhanced by furnishing these with a wedge shape. The negative differential resistance effect is originated by the presence of two degenerate electronic states localized at each of the atoms coupling the molecule to graphene which are strongly affected by a bias voltage. The effect could thus be tailored by a suitable choice of the molecule and contact atoms if edge shape could be controlled with atomic precision.
△ Less
Submitted 13 February, 2012;
originally announced February 2012.
-
Structure and electronic properties of molybdenum monoatomic wires encapsulated in carbon nanotubes
Authors:
A. García-Fuente,
V. M. García-Suárez,
J. Ferrer,
A. Vega
Abstract:
Monoatomic chains of molybdenum encapsulated in single walled carbon nanotubes of different chiralities are investigated using density functional theory. We determine the optimal size of the carbon nanotube for encapsulating a single atomic wire, as well as the most stable atomic arrangement adopted by the wire. We also study the transport properties in the ballistic regime by computing the transm…
▽ More
Monoatomic chains of molybdenum encapsulated in single walled carbon nanotubes of different chiralities are investigated using density functional theory. We determine the optimal size of the carbon nanotube for encapsulating a single atomic wire, as well as the most stable atomic arrangement adopted by the wire. We also study the transport properties in the ballistic regime by computing the transmission coefficients and tracing them back to electronic conduction channels of the wire and the host. We predict that carbon nanotubes of appropriate radii encapsulating a Mo wire have metallic behavior, even if both the nanotube and the wire are insulators. Therefore, encapsulating Mo wires in CNT is a way to create conductive quasi one-dimensional hybrid nanostructures.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
Quantum Interference in Single Molecule Electronic Systems
Authors:
R. E. Sparks,
V. M. García-Suárez,
D. Zs. Manrique,
C. J. Lambert
Abstract:
We present a general analytical formula and an ab initio study of quantum interference in multi-branch molecules. Ab initio calculations are used to investigate quantum interference in a benzene-1,2-dithiolate (BDT) molecule sandwiched between gold electrodes and through oligoynes of various lengths. We show that when a point charge is located in the plane of a BDT molecule and its position varied…
▽ More
We present a general analytical formula and an ab initio study of quantum interference in multi-branch molecules. Ab initio calculations are used to investigate quantum interference in a benzene-1,2-dithiolate (BDT) molecule sandwiched between gold electrodes and through oligoynes of various lengths. We show that when a point charge is located in the plane of a BDT molecule and its position varied, the electrical conductance exhibits a clear interference effect, whereas when the charge approaches a BDT molecule along a line normal to the plane of the molecule and passing through the centre of the phenyl ring, interference effects are negligible. In the case of olygoynes, quantum interference leads to the appearance of a critical energy $E_c$, at which the electron transmission coefficient $T(E)$ of chains with even or odd numbers of atoms is independent of length. To illustrate the underlying physics, we derive a general analytical formula for electron transport through multi-branch structures and demonstrate the versatility of the formula by comparing it with the above ab-initio simulations. We also employ the analytical formula to investigate the current inside the molecule and demonstrate that large counter currents can occur within a ring-like molecule such as BDT, when the point charge is located in the plane of the molecule. The formula can be used to describe quantum interference and Fano resonances in structures with branches containing arbitrary elastic scattering regions connected to nodal sites.
△ Less
Submitted 7 March, 2011;
originally announced March 2011.
-
First-principles scheme for spectral adjustment in nanoscale transport
Authors:
Víctor M. García-Suárez,
Colin J. Lambert
Abstract:
We implement a general method for correcting the low-bias transport properties of nanoscale systems within an ab-initio methodology based on linear combinations of atomic orbitals. We show how the typical problem of an underestimated HOMO-LUMO gap can be corrected, leading to quantitative and qualitative agreement with experiments. We show that an alternative method based on calculating the positi…
▽ More
We implement a general method for correcting the low-bias transport properties of nanoscale systems within an ab-initio methodology based on linear combinations of atomic orbitals. We show how the typical problem of an underestimated HOMO-LUMO gap can be corrected, leading to quantitative and qualitative agreement with experiments. We show that an alternative method based on calculating the position of the relevant transport resonances and fitting them to Lorentzians can significantly underestimate the conductance and does not accurately reproduce the electron transmission coefficient between resonances. We compare this simple method in an ideal system of a benzene molecule coupled to featureless leads to more sophisticated approaches such as $GW$ and find a rather good agreement between both. We also present results for a benzene-dithiolate molecule between gold leads, where we study different coupling configurations for straight and tilted molecules, and show that this method yields the observed evolution of two-dimensional conductance histograms. We also explain the presence of low conductance zones in such histograms by taking into account different coupling configurations.
△ Less
Submitted 1 February, 2011; v1 submitted 14 January, 2011;
originally announced January 2011.
-
Effects of bonding type and interface geometry on coherent transport through the single-molecule magnet Mn12
Authors:
Kyungwha Park,
Salvador Barraza-Lopez,
Victor M. Garcia-Suarez,
Jaime Ferrer
Abstract:
We examine theoretically coherent electron transport through the single-molecule magnet Mn$_{12}$, bridged between Au(111) electrodes, using the non-equilibrium Green's function method and the density-functional theory. We analyze the effects of bonding type, molecular orientation, and geometry relaxation on the electronic properties and charge and spin transport across the single-molecule junctio…
▽ More
We examine theoretically coherent electron transport through the single-molecule magnet Mn$_{12}$, bridged between Au(111) electrodes, using the non-equilibrium Green's function method and the density-functional theory. We analyze the effects of bonding type, molecular orientation, and geometry relaxation on the electronic properties and charge and spin transport across the single-molecule junction. We consider nine interface geometries leading to five bonding mechanisms and two molecular orientations: (i) Au-C bonding, (ii) Au-Au bonding, (iii) Au-S bonding, (iv) Au-H bonding, and (v) physisorption via van der Waals forces. The two molecular orientations of Mn$_{12}$ correspond to the magnetic easy axis of the molecule aligned perpendicular [hereafter denoted as orientation (1)] or parallel [orientation (2)] to the direction of electron transport. We find that the electron transport is carried by the lowest unoccupied molecular orbital (LUMO) level in all the cases that we have simulated. Relaxation of the junction geometries mainly shifts the relevant occupied molecular levels toward the Fermi energy as well as slightly reduces the broadening of the LUMO level. As a result, the current slightly decreases at low bias voltage. Our calculations also show that placing the molecule in the orientation (1) broadens the LUMO level much more than in the orientation (2), due to the internal structure of the Mn$_{12}$. Consequently, junctions with the former orientation yield a higher current than those with the latter. Among all of the bonding types considered, the Au-C bonding gives rise to the highest current (about one order of magnitude higher than the Au-S bonding), for a given distance between the electrodes. The current through the junction with other bonding types decreases in the order of Au-Au, Au-S, and Au-H. Importantly, the spin-filtering effect in all the nine geometries stays robust and their ratios of the majority-spin to the minority-spin transmission coefficients are in the range of 10$^3$ to 10$^8$. The general trend in transport among the different bonding types and molecular orientations obtained from this study may be applied to other single-molecular magnets.
△ Less
Submitted 13 March, 2010;
originally announced March 2010.
-
Impact of dimerization and stretching on the transport properties of molybdenum atomic wires
Authors:
A. García-Fuente,
A. Vega,
V. M. García-Suárez,
J. Ferrer
Abstract:
We study the electrical and transport properties of monoatomic Mo wires with different structural characteristics. We consider first periodic wires with inter-atomic distances ranging between the dimerized wire to that formed by equidistant atoms. We find that the dimerized case has a gap in the electronic structure which makes it insulating, as opposed to the equidistant or near-equidistant cas…
▽ More
We study the electrical and transport properties of monoatomic Mo wires with different structural characteristics. We consider first periodic wires with inter-atomic distances ranging between the dimerized wire to that formed by equidistant atoms. We find that the dimerized case has a gap in the electronic structure which makes it insulating, as opposed to the equidistant or near-equidistant cases which are metallic. We also simulate two conducting one-dimensional Mo electrodes separated by a scattering region which contains a number of dimers between 1 and 6. The $I-V$ characteristics strongly depend on the number of dimers and vary from ohmic to tunneling, with the presence of different gaps. We also find that stretched chains are ferromagnetic.
△ Less
Submitted 8 February, 2010;
originally announced February 2010.
-
Current rectification in molecular junctions produced by local potential fields
Authors:
Tomasz Kostyrko,
Víctor M. García-Suárez,
Colin J. Lambert,
Bogdan R. Bułka
Abstract:
The transport properties of a octane-dithiol (ODT) molecule coupled to Au(001) leads are analyzed using density functional theory and non-equilibrium Green functions. It is shown that a symmetric molecule can turn into a diode under influence of a local electric field created by an external charged probe. The origin of the asymmetry of the current--voltage ($I-V$) dependence is traced back to th…
▽ More
The transport properties of a octane-dithiol (ODT) molecule coupled to Au(001) leads are analyzed using density functional theory and non-equilibrium Green functions. It is shown that a symmetric molecule can turn into a diode under influence of a local electric field created by an external charged probe. The origin of the asymmetry of the current--voltage ($I-V$) dependence is traced back to the appearance of a probe induced quasi--local state in the pseudogap of the ODT molecule. The induced state affects electron transport, provided it is close to the Fermi level of the leads. An asymmetric placement of the charged probe along the alkane chain makes the induced quasi--local state in the energy gap very sensitive to the bias voltage and results in rectification of the current. The results based on DFT are supported by independent calculations using a simple one--particle model Hamiltonian.
△ Less
Submitted 6 February, 2010;
originally announced February 2010.
-
Surface-induced magnetism in C-doped SnO$_{2}$
Authors:
Gul Rahman,
Víctor M. García-Suárez
Abstract:
The magnetism of C-doped SnO$_{2}$ (001) surfaces is studied using first-principles calculations. It is found that carbon does not induce magnetism in bulk SnO$_{2}$ when located at the oxygen site, but shows a large magnetic moment at the SnO$_{2}$ (001) surface. The magnetic moment is mainly contributed by the carbon atoms due to empty minority spins of $p$ orbitals and is localized at the sur…
▽ More
The magnetism of C-doped SnO$_{2}$ (001) surfaces is studied using first-principles calculations. It is found that carbon does not induce magnetism in bulk SnO$_{2}$ when located at the oxygen site, but shows a large magnetic moment at the SnO$_{2}$ (001) surface. The magnetic moment is mainly contributed by the carbon atoms due to empty minority spins of $p$ orbitals and is localized at the surface and subsurface atoms. No magnetism is observed when the carbon atom is located at the subsurface oxygen sites. The origin of magnetism is discussed in the context of surface bonding.
△ Less
Submitted 13 February, 2010; v1 submitted 14 January, 2010;
originally announced January 2010.
-
Giant thermopower and figure of merit in single-molecule devices
Authors:
C. M. Finch,
V. M. García-Suárez,
C. J. Lambert
Abstract:
We present a study of the thermopower $S$ and the dimensionless figure of merit $ZT$ in molecules sandwiched between gold electrodes. We show that for molecules with side groups, the shape of the transmission coefficient can be dramatically modified by Fano resonances near the Fermi energy, which can be tuned to produce huge increases in $S$ and $ZT$. This shows that molecules exhibiting Fano re…
▽ More
We present a study of the thermopower $S$ and the dimensionless figure of merit $ZT$ in molecules sandwiched between gold electrodes. We show that for molecules with side groups, the shape of the transmission coefficient can be dramatically modified by Fano resonances near the Fermi energy, which can be tuned to produce huge increases in $S$ and $ZT$. This shows that molecules exhibiting Fano resonances have a high efficiency of thermoelectric cooling which is not present for conventional un-gated molecules with only delocalized states along their backbone.
△ Less
Submitted 24 November, 2008; v1 submitted 18 November, 2008;
originally announced November 2008.
-
Vacancy-induced magnetism in SnO$_{2}$: A density functional study
Authors:
Gul Rahman,
Víctor M. García-Suárez,
Soon Cheol Hong
Abstract:
We study the magnetic and electronic properties of defects in SnO$_{2}$ using pseudopotential and all electron methods. Our calculations show that bulk SnO$_{2}$ is non-magnetic, but it shows magnetism with a magnetic moment around 4.00 $μ_{B}$ due to Sn vacancy (V$_\mathrm{Sn}$). The magnetic moment comes mainly from O atoms surrounding V$_\mathrm{Sn}$ and Sn atoms, which couple antiferromagnet…
▽ More
We study the magnetic and electronic properties of defects in SnO$_{2}$ using pseudopotential and all electron methods. Our calculations show that bulk SnO$_{2}$ is non-magnetic, but it shows magnetism with a magnetic moment around 4.00 $μ_{B}$ due to Sn vacancy (V$_\mathrm{Sn}$). The magnetic moment comes mainly from O atoms surrounding V$_\mathrm{Sn}$ and Sn atoms, which couple antiferromagnetically with the O atoms in the presence of V$_\mathrm{Sn}$. The coupling between different Sn vacancies is also studied and we find that these defects not only couple ferromagnetically but also antiferromagnetically and ferrimagnetically. Our calculations demonstrate that the experimentally observed giant magnetic moment of transition metal doped SnO$_{2}$ can be attributed to V$_\mathrm{Sn}$.
△ Less
Submitted 15 October, 2008;
originally announced October 2008.
-
Tuning the conductance of molecular junctions: transparent versus tunneling regimes
Authors:
J. Ferrer,
V. M. Garcia-Suarez
Abstract:
We present a theoretical study of the transport characteristics of molecular junctions, where first-row diatomic molecules are attached to (001) gold and platinum electrodes. We find that the conductance of all of these junctions is of the order of the conductance quantum unit $G_0$, spelling out that they belong to the transparent regime. We further find that the transmission coefficients show…
▽ More
We present a theoretical study of the transport characteristics of molecular junctions, where first-row diatomic molecules are attached to (001) gold and platinum electrodes. We find that the conductance of all of these junctions is of the order of the conductance quantum unit $G_0$, spelling out that they belong to the transparent regime. We further find that the transmission coefficients show wide plateaus as a function of the energy, instead of the usual sharp resonances that signal the molecular levels in the tunneling regime. We use Caroli's model to show that this is a rather generic property of the transparent regime of a junction, which is driven by a strong effective coupling between the delocalized molecular levels and the conduction channels at the electrodes. We analyse the transmission coefficients and chemical bonding of gold/Benzene and gold/Benzene-dithiolate (BDT) junctions to understand why the later show large resistances, while the former are highly conductive.
△ Less
Submitted 14 October, 2008; v1 submitted 10 October, 2008;
originally announced October 2008.
-
Huge anisotropic magneto-resistance in iridium atomic chains
Authors:
V. M. Garcia-Suarez,
D. Zs. Manrique,
C. J. Lambert,
J. Ferrer
Abstract:
We analyze in this article the magneto-resistance ratio of finite and infinite iridium and platinum chains. Our calculations, that are based on a combination of non equilibrium Green function techniques and density functional theory, include a fully self-consistent treatment of non-collinear magnetism and of the spin-orbit interaction. They indicate that, in addition to having an extremely large…
▽ More
We analyze in this article the magneto-resistance ratio of finite and infinite iridium and platinum chains. Our calculations, that are based on a combination of non equilibrium Green function techniques and density functional theory, include a fully self-consistent treatment of non-collinear magnetism and of the spin-orbit interaction. They indicate that, in addition to having an extremely large magnetic anisotropy that may overcome the super-paramagnetic limit, infinite and also realistic finite-length iridium chains show sizeable anisotropic magnetoresistance ratios. We therefore propose iridium nanostructures as promising candidates for nanospintronics logic devices.
△ Less
Submitted 7 October, 2008;
originally announced October 2008.
-
Non-trivial length dependence of the conductance and negative differential resistance in atomic molecular wires
Authors:
V. M. García-Suárez,
C. J. Lambert
Abstract:
We study the electronic and transport properties of two novel molecular wires made of atomic chains of carbon atoms (polyynes) capped with either, benzene-thiols or pyridines. While both molecules are structurally similar, the electrical conductance of benzene-thiol-capped chains attached to gold electrodes is found to be much higher than that of pyridine-capped chains. We predict that the condu…
▽ More
We study the electronic and transport properties of two novel molecular wires made of atomic chains of carbon atoms (polyynes) capped with either, benzene-thiols or pyridines. While both molecules are structurally similar, the electrical conductance of benzene-thiol-capped chains attached to gold electrodes is found to be much higher than that of pyridine-capped chains. We predict that the conductance is almost independent of molecular length, which suggests that these molecules could be ideal molecular wires for sub-10 nm circuitry. Both systems exhibit negative differential resistance (NDR) but its origin and characteristics depend on the type of molecule. We find a novel type of NDR mechanism produced by the movement of the LUMO resonance with bias. We also show that by gating the pyridine-capped molecules it is possible to make the NDR disappear and dramatically modify the $I$-$V$ characteristics and the length dependence.
△ Less
Submitted 18 August, 2008; v1 submitted 11 August, 2008;
originally announced August 2008.
-
Tailoring the Fermi level of the leads in molecular-electronic devices
Authors:
V. M. García-Suárez,
C. J. Lambert
Abstract:
The dependence of the transport properties on the specific location of the Fermi level in molecular electronics devices is studied by using electrodes of different materials. The zero-bias transport properties are shown to depend dramatically on the elemental composition of the electrodes, even though the shape of the transmission coefficients is very similar. By using alkaline materials it is p…
▽ More
The dependence of the transport properties on the specific location of the Fermi level in molecular electronics devices is studied by using electrodes of different materials. The zero-bias transport properties are shown to depend dramatically on the elemental composition of the electrodes, even though the shape of the transmission coefficients is very similar. By using alkaline materials it is possible to move the Fermi level from the HOMO-LUMO gap to the LUMO resonance and change dramatically the length dependence of the conductance of molecular wires, which opens the possibility of using molecules with different lengths and very similar conductances in nanoscale circuits. This method shows how to dramatically increase the conductance of molecular devices and alter qualitatively and quantitatively their electronic and transport properties.
△ Less
Submitted 9 November, 2008; v1 submitted 25 July, 2008;
originally announced July 2008.
-
Conformation dependence of molecular conductance: chemistry versus geometry
Authors:
C. M. Finch,
S. Sirichantaropass,
S. W. Bailey,
I. M. Grace,
V. M. García-Suárez,
C. J. Lambert
Abstract:
Recent experiments by Venkatamaran {\em et al.} [Nature (London) {\bf 442}, 904 (2006)] on a series of molecular wires with varying chemical compositions, revealed a linear dependence of the conductance on $\mathrm{cos}^2θ$, where $θ$ is the angle of twist between neighboring aromatic rings. To investigate whether or not this dependence has a more general applicability, we present a first princi…
▽ More
Recent experiments by Venkatamaran {\em et al.} [Nature (London) {\bf 442}, 904 (2006)] on a series of molecular wires with varying chemical compositions, revealed a linear dependence of the conductance on $\mathrm{cos}^2θ$, where $θ$ is the angle of twist between neighboring aromatic rings. To investigate whether or not this dependence has a more general applicability, we present a first principles theoretical study of the transport properties of this family of molecules as a function of the chemical composition, conformation and the contact atom and geometry. If the Fermi energy $E_\mathrm{F}$ lies within the HOMO-LUMO gap, then we reproduce the above experimental results. More generally, however, if $E_\mathrm{F}$ is located within either the LUMO or HOMO states, the presence of resonances destroys the linear dependence of the conductance on $\mathrm{cos}^2θ$ and gives rise to non-monotonic behaviour associated with the level structure of the different molecules. Our results suggest that the above experiments provide a novel method for extracting spectroscopic information about molecules contacted to electrodes.
△ Less
Submitted 5 March, 2007;
originally announced March 2007.
-
Predictions for the formation of new atomic chains in Mechanically Controllable Break Junction experiments
Authors:
Lucas Fernandez-Seivane,
Victor M. Garcia-Suarez,
Jaime Ferrer
Abstract:
We analyze the stability and magnetic properties of infinite zigzag atomic chains of a large number of late third, fourth and fifth-row transition metal atoms, as well as of the Group IV elements Si, Ge, Sn and Pb. We find that zigzag chains of third- and fourth-row elements are not stable, while those made of Si, Ge, Sn, Pb, W, Os, Ir, Pt and Au are. These results correlate well with known data…
▽ More
We analyze the stability and magnetic properties of infinite zigzag atomic chains of a large number of late third, fourth and fifth-row transition metal atoms, as well as of the Group IV elements Si, Ge, Sn and Pb. We find that zigzag chains of third- and fourth-row elements are not stable, while those made of Si, Ge, Sn, Pb, W, Os, Ir, Pt and Au are. These results correlate well with known data in Mechanically Controllable Break Junction experiemnts (MCBJE). We therefore conjecture that the stability of an infinite chain is at least a necessary condition for the formation of a finite sized one in MCBJE. We therefore predict that Sn and Os, and possibly W and Pb chains may be found in those experiments. We also find that the bonds in Hg chains are extremely soft. We finally show that the magnetic moments and anisotropies of Ir and Pt chains show a non-trivial behavior.
△ Less
Submitted 24 November, 2006;
originally announced November 2006.
-
Electronic Properties of Alkali- and Alkaline-Earth-Intercalated Silicon Nanowires
Authors:
S. Sirichantaropass,
V. M. García-Suárez,
C. J. Lambert
Abstract:
We present a first-principles study of the electronic properties of silicon clathrate nanowires intercalated with various types of alkali or alkaline-earth atoms. We find that the band structure of the nanowires can be tuned by varying the impurity atom within the nanowire. The electronic character of the resulting systems can vary from metallic to semiconducting with direct band gaps. These pro…
▽ More
We present a first-principles study of the electronic properties of silicon clathrate nanowires intercalated with various types of alkali or alkaline-earth atoms. We find that the band structure of the nanowires can be tuned by varying the impurity atom within the nanowire. The electronic character of the resulting systems can vary from metallic to semiconducting with direct band gaps. These properties make the nanowires specially suitable for electrical and optoelectronic applications.
△ Less
Submitted 20 January, 2007; v1 submitted 5 November, 2006;
originally announced November 2006.
-
Study of transport properties of a molecular junction as a function of distance between the leads
Authors:
Victor M. Garcia-Suarez,
Tomasz Kostyrko,
Steven Bailey,
Colin Lambert,
Bogdan R. Bulka
Abstract:
We consider a model of a molecular junction made of BDT (benzene dithiol) molecule trapped between two Au(100) leads. Using the ab initio approach implemented in the SIESTA package we look for the optimal configuration of the molecule as a function of a distance between the leads. We find that for the distance long enough the energy of the system is minimized when the molecule is bonded asymmetr…
▽ More
We consider a model of a molecular junction made of BDT (benzene dithiol) molecule trapped between two Au(100) leads. Using the ab initio approach implemented in the SIESTA package we look for the optimal configuration of the molecule as a function of a distance between the leads. We find that for the distance long enough the energy of the system is minimized when the molecule is bonded asymmetricaly, i.e. chemisorbed to one of the leads, whereas for the distance shorter than 12 Åthe energy is minimized for the molecule sitting in the middle between the leads. We discuss possible consequences of the above findings for the transport properties of the junction.
△ Less
Submitted 11 October, 2006;
originally announced October 2006.
-
Strongly correlated electron physics in nanotube-encapsulated metallocene chains
Authors:
V. M. García-Suárez,
J. Ferrer,
C. J. Lambert
Abstract:
The structural, electronic and transport properties of metallocene molecules (MCp$_2$) and isolated or nanotube-encapsulated chains are studied by using a combination of density functional theory and non-equilibrium Green's functions. The analysis first discusses the whole series of isolated MCp$_2$ molecules, where M = V, Cr, Mn, Fe, Co, Ni, Ru, and Os. The series presents a rich range of elect…
▽ More
The structural, electronic and transport properties of metallocene molecules (MCp$_2$) and isolated or nanotube-encapsulated chains are studied by using a combination of density functional theory and non-equilibrium Green's functions. The analysis first discusses the whole series of isolated MCp$_2$ molecules, where M = V, Cr, Mn, Fe, Co, Ni, Ru, and Os. The series presents a rich range of electronic and magnetic behaviors due to the interplay between the crystal field interaction and Hund's rules, as the occupation of the $d$ shell increases. The article then shows how many of these interesting properties can also be seen when MCp$_2$ molecules are linked together to form periodic chains. It is argued that encapsulation of the chains inside carbon nanotubes, that is exothermic for radii larger than 4.5 Å, provides the missing mechanical stability and electrical isolation. The structural stability, charge transfer, magnetic and electronic behavior of the ensuing chains, as well as the modification of the electrostatic potential in the nanotube wall produced by the metallocenes as thoroughly discussed. We argue that the full devices can be characterized by two doped, strongly correlated Hubbard models whose mutual hybridization is almost negligible. The charge transferred from the chains produces a strong modification of the electrostatic potential in the nanotube walls, which is amplified in case of semiconducting and endothermic nanotubes. The transport properties of isolated metallocenes between semi-infinite nanotubes are also analyzed and shown to lead to important changes in the transmission coefficients of clean nanotubes for high energies.
△ Less
Submitted 20 January, 2007; v1 submitted 26 July, 2006;
originally announced July 2006.
-
Tuning the electrical conductivity of nanotube-encapsulated metallocene wires
Authors:
V. M. Garcia-Suarez,
J. Ferrer,
C. J. Lambert
Abstract:
We analyze a new family of carbon nanotube-based molecular wires, formed by encapsulating metallocene molecules inside the nanotubes. Our simulations, that are based on a combination of non-equilibrium Green function techniques and density functional theory, indicate that these wires can be engineered to exhibit desirable magnetotransport effects for use in spintronics devices. The proposed stru…
▽ More
We analyze a new family of carbon nanotube-based molecular wires, formed by encapsulating metallocene molecules inside the nanotubes. Our simulations, that are based on a combination of non-equilibrium Green function techniques and density functional theory, indicate that these wires can be engineered to exhibit desirable magnetotransport effects for use in spintronics devices. The proposed structures should also be resilient to room-temperature fluctuations, and are expected to have a high yield.
△ Less
Submitted 9 February, 2006;
originally announced February 2006.
-
The Smeagol method for spin- and molecular-electronics
Authors:
A. R. Rocha,
V. M. García-Suárez,
S. Bailey,
C. Lambert,
J. Ferrer,
S. Sanvito
Abstract:
{\it Ab initio} computational methods for electronic transport in nanoscaled systems are an invaluable tool for the design of quantum devices. We have developed a flexible and efficient algorithm for evaluating $I$-$V$ characteristics of atomic junctions, which integrates the non-equilibrium Green's function method with density functional theory. This is currently implemented in the package {\it…
▽ More
{\it Ab initio} computational methods for electronic transport in nanoscaled systems are an invaluable tool for the design of quantum devices. We have developed a flexible and efficient algorithm for evaluating $I$-$V$ characteristics of atomic junctions, which integrates the non-equilibrium Green's function method with density functional theory. This is currently implemented in the package {\it Smeagol}. The heart of {\it Smeagol} is our novel scheme for constructing the surface Green's functions describing the current/voltage probes. It consists of a direct summation of both open and closed scattering channels together with a regularization procedure of the Hamiltonian, and provides great improvements over standard recursive methods. In particular it allows us to tackle material systems with complicated electronic structures, such as magnetic transition metals. Here we present a detailed description of {\it Smeagol} together with an extensive range of applications relevant for the two burgeoning fields of spin and molecular-electronics.
△ Less
Submitted 4 October, 2005;
originally announced October 2005.
-
Non-universal behavior of the parity effect in monovalent atomic wires
Authors:
Péter Major,
V. M. García-Suárez,
S. Sirichantaropass,
József Cserti,
C. J. Lambert,
J. Ferrer,
Géza Tichy
Abstract:
We propose a mixed analytical-ab-initio method for the accurate calculation of the conductance in monovalent atomic wires. The method relies on the most general formula for ballistic transport through a monovalent wire, whose parameters can be determined from first-principles calculations. Our central result is the demonstration of the highly non-universal behavior of the conductance, which depe…
▽ More
We propose a mixed analytical-ab-initio method for the accurate calculation of the conductance in monovalent atomic wires. The method relies on the most general formula for ballistic transport through a monovalent wire, whose parameters can be determined from first-principles calculations. Our central result is the demonstration of the highly non-universal behavior of the conductance, which depends on the fine details of the contacts to the leads. We are therefore able to reconcile a large number of the apparently contradictory results that have recently appeared in the literature.
△ Less
Submitted 27 July, 2005;
originally announced July 2005.
-
Conductance oscillations in zigzag platinum chains
Authors:
V. M. Garcia-Suarez,
A. R. Rocha,
S. W. Bailey,
C. J. Lambert,
S. Sanvito,
J. Ferrer
Abstract:
Using first principles simulations we perform a detailed study of the structural, electronic and transport properties of monoatomic platinum chains, sandwiched between platinum electrodes. First we demonstrate that the most stable atomic configuration corresponds to a zigzag arrangement that gradually straightens as the chains are stretched. Secondly, we find that the conductance at equilibrium…
▽ More
Using first principles simulations we perform a detailed study of the structural, electronic and transport properties of monoatomic platinum chains, sandwiched between platinum electrodes. First we demonstrate that the most stable atomic configuration corresponds to a zigzag arrangement that gradually straightens as the chains are stretched. Secondly, we find that the conductance at equilibrium atomic spacing does not oscillate with the number of atoms $n$ in the chain, but instead decreases almost monotonically with $n$. In contrast, the conductances of chains of fixed $n$ oscillate as the end atoms are pulled apart, due to the gradual closing and opening of conductance channels as the chain straightens.
△ Less
Submitted 13 January, 2006; v1 submitted 19 May, 2005;
originally announced May 2005.
-
Single channel conductance of H$_2$ molecules attached to platinum or palladium electrodes
Authors:
V. M. Garcia-Suarez,
A. R. Rocha,
S. W. Bailey,
C. J. Lambert,
S. Sanvito,
J. Ferrer
Abstract:
We report a detailed theoretical study of the bonding and conduction properties of an hydrogen molecule joining either platinum or palladium electrodes. We show that an atomic arrangement where the molecule is placed perpendicular to the electrodes is unstable for all distances between electrodes. In contrast, the configuration where the molecule bridges the electrodes is stable in a wide range…
▽ More
We report a detailed theoretical study of the bonding and conduction properties of an hydrogen molecule joining either platinum or palladium electrodes. We show that an atomic arrangement where the molecule is placed perpendicular to the electrodes is unstable for all distances between electrodes. In contrast, the configuration where the molecule bridges the electrodes is stable in a wide range of distances. In this last case the bonding state of the molecule does not hybridize with the leads and remains localized within the junction. As a result, this state does not transmit charge so that electronic transport is carried only through the anti-bonding state. This fact leads to conductances of 1 $G_0$ at most, where $G_0=2e^2/h$. We indeed find that G is equal to 0.9 and 0.6 $G_0$ for Pt and Pd contacts respectively.
△ Less
Submitted 29 April, 2005; v1 submitted 28 December, 2004;
originally announced December 2004.
-
Geometry dependence of the conductance oscillations of monovalent atomic chains
Authors:
Peter Major,
Geza Tichy,
Jozsef Cserti,
Victor Manuel Garcia-Suarez,
Skon Sirichantaropass
Abstract:
Using a tight binding model we calculate the conductance of monovalent atomic chains for different contact geometries. The leads connected to the chains are modelled as semi-infinite fcc lattices with different orientations and couplings. Our aim is twofold: To check the validity of a three-parametric conductance formula for differently oriented leads, and to investigate the geometry dependence…
▽ More
Using a tight binding model we calculate the conductance of monovalent atomic chains for different contact geometries. The leads connected to the chains are modelled as semi-infinite fcc lattices with different orientations and couplings. Our aim is twofold: To check the validity of a three-parametric conductance formula for differently oriented leads, and to investigate the geometry dependence of the conductance oscillations. We show that the character of these oscillations depends strongly on the geometry of the chain-lead coupling.
△ Less
Submitted 15 January, 2007; v1 submitted 12 November, 2004;
originally announced November 2004.
-
First principles simulations of the magnetic and structural properties of Iron
Authors:
V. M. Garcia-Suarez,
C. M. Newman,
C. J. Lambert,
J. M. Pruneda,
J. Ferrer
Abstract:
We have implemented non-collinear GGA and a generalized Bloch's theorem to simulate unconmensurate spiral arrangements of spins in a Density Functional Theory code based on localized wave functions. We have subsequently performed a thorough study of the different states of bulk Iron. We determine the minimal basis set required to obtain reliable orderings of ground and excited states. We find th…
▽ More
We have implemented non-collinear GGA and a generalized Bloch's theorem to simulate unconmensurate spiral arrangements of spins in a Density Functional Theory code based on localized wave functions. We have subsequently performed a thorough study of the different states of bulk Iron. We determine the minimal basis set required to obtain reliable orderings of ground and excited states. We find that the most stable fcc phase is a spiral with an equilibrium lattice constant 3.56 A.
△ Less
Submitted 18 June, 2004;
originally announced June 2004.