-
Demonstration of the effect of stirring on nucleation from experiments on the International Space Station using the ISS-EML facility
Authors:
A. K. Gangopadhyay,
M. E. Sellers,
G. P. Bracker,
D. Holland-Moritz,
D. C. Van Hoesen,
S. Koch,
P. K. Galenko,
A. K. Pauls,
R. W. Hyers,
K. F. Kelton
Abstract:
The effect of fluid flow on crystal nucleation in supercooled liquids is not well understood. The variable density and temperature gradients in the liquid make it difficult to study this under terrestrial gravity conditions. Nucleation experiments were therefore made in a microgravity environment using the Electromagnetic Levitation facility on the International Space Station on a bulk glass-formi…
▽ More
The effect of fluid flow on crystal nucleation in supercooled liquids is not well understood. The variable density and temperature gradients in the liquid make it difficult to study this under terrestrial gravity conditions. Nucleation experiments were therefore made in a microgravity environment using the Electromagnetic Levitation facility on the International Space Station on a bulk glass-forming Zr57Cu15.4Ni12.6Al10Nb5 (Vit106), as well as Cu50Zr50 and the quasicrystal-forming Ti39.5Zr39.5Ni21 liquids. The maximum supercooling temperatures for each alloy were measured as a function of controlled stirring by applying various combinations of radio frequency positioner and heater voltages to the water-cooled copper coils. The flow patterns were simulated from the known parameters for the coil and the levitated samples. The maximum nucleation temperatures increased systematically with increased fluid flow in the liquids for Vit106, but stayed nearly unchanged for the other two. These results are consistent with the predictions from the coupled-flux model for nucleation.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
The uncertainty of glass transition temperature in molecular dynamics simulations and numerical algorithm for its unique determination
Authors:
N. M. Chtchelkatchev,
R. E. Ryltsev,
V. Ankudinov,
V. N. Ryzhov,
M. Apel,
P. K. Galenko
Abstract:
When the cooling rate $v$ is smaller than a certain material-dependent threshold, the glass transition temperature $T_g$ becomes to a certain degree the "material parameter" being nearly independent on the cooling rate. The common method to determine $T_g$ is to extrapolate viscosity $ν$ of the liquid state at temperatures not far above the freezing conditions to lower temperatures where liquid fr…
▽ More
When the cooling rate $v$ is smaller than a certain material-dependent threshold, the glass transition temperature $T_g$ becomes to a certain degree the "material parameter" being nearly independent on the cooling rate. The common method to determine $T_g$ is to extrapolate viscosity $ν$ of the liquid state at temperatures not far above the freezing conditions to lower temperatures where liquid freezes and viscosity is hardly measurable. It is generally accepted that the glass transition occurs when viscosity drops by $13\leq n\leq17$ orders of magnitude. The accuracy of $T_g$ depends on the extrapolation quality. We propose here an algorithm for a unique determining of $T_g$. The idea is to unambiguously extrapolate $ν(T)$ to low temperatures without relying upon a specific model. It can be done using the numerical analytical continuation of $ν(T)$-function from above $T_g$ where it is measurable, to $T\gtrsim T_g$. For numerical analytical continuation, we use the Pade approximant method.
△ Less
Submitted 24 November, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Growth of different faces in a body centered cubic lattice: a case of the phase-field-crystal modeling
Authors:
Vladimir Ankudinov,
Peter K. Galenko
Abstract:
Interface energy and kinetic coefficient of crystal growth strongly depend on the face of the crystalline lattice. To investigate the kinetic anisotropy and velocity of different crystallographic faces we use the hyperbolic (modified) phase field crystal model which takes into account atomic density (as a slow thermodynamic variable) and atomic flux (as a fast thermodynamic variable). Such model c…
▽ More
Interface energy and kinetic coefficient of crystal growth strongly depend on the face of the crystalline lattice. To investigate the kinetic anisotropy and velocity of different crystallographic faces we use the hyperbolic (modified) phase field crystal model which takes into account atomic density (as a slow thermodynamic variable) and atomic flux (as a fast thermodynamic variable). Such model covers slow and rapid regimes of interfaces propagation at small and large driving forces during solidification. In example of BCC crystal lattice invading the homogeneous liquid, dynamical regimes of advancing front propagating along the selected crystallographic directions are studied. The obtained velocity and the velocity sequences for different faces are compared with known results.
△ Less
Submitted 18 March, 2020; v1 submitted 19 November, 2019;
originally announced November 2019.
-
Diffuse interface models of solidification with convection: The choice of a finite interface thickness
Authors:
Amol Subhedar,
Peter K. Galenko,
Fathollah Varnik
Abstract:
The thin interface limit aims at minimizing the effects arising from a numerical interface thickness, inherent in diffuse interface models of solidification and microstructure evolution such as the phase field model. While the original formulation of this problem is restricted to transport by diffusion, we consider here the case of melt convection. Using an analysis of the coupled phase field-flui…
▽ More
The thin interface limit aims at minimizing the effects arising from a numerical interface thickness, inherent in diffuse interface models of solidification and microstructure evolution such as the phase field model. While the original formulation of this problem is restricted to transport by diffusion, we consider here the case of melt convection. Using an analysis of the coupled phase field-fluid dynamic equations, we show here that such a thin interface limit does also exist if transport contains both diffusion and convection. This prediction is tested by comparing simulation studies, which make use of the thin-interface condition, with an analytic sharp-interface theory for dendritic tip growth under convection.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Boundary interface conditions and solute trapping near the transition to diffusionless solidification
Authors:
G. L. Buchbinder,
P. K. Galenko
Abstract:
The process of rapid solidification of a binary mixture is considered in the framework of local nonequilibrium model (LNM) based on the assumption that there is no local equilibrium in solute diffusion in the bulk liquid and at the solid-liquid interface. According to LNM the transition to complete solute trapping and diffusionless solidification occurs at a finite interface velocity $V=V_D$, wher…
▽ More
The process of rapid solidification of a binary mixture is considered in the framework of local nonequilibrium model (LNM) based on the assumption that there is no local equilibrium in solute diffusion in the bulk liquid and at the solid-liquid interface. According to LNM the transition to complete solute trapping and diffusionless solidification occurs at a finite interface velocity $V=V_D$, where $V_D$ is the diffusion speed in bulk liquid. In the present work, the boundary conditions at the phase interface moving with the velocity $V$ close to $V_D$ ($V \lesssim V_D$) have been derived to find the non-equilibrium solute partition coefficient. In the high-speed region, its comparison with the partition coefficient from the work [Phys. Rev. E 76 (2007) 031606] is given.
△ Less
Submitted 6 August, 2019;
originally announced August 2019.
-
Boundary conditions and heat resistance at the moving solid--liquid interface
Authors:
Gennady Buchbinder,
Peter Galenko
Abstract:
Boundary conditions for the solid-liquid interface of the solidifying pure melt have been derived. In the derivation the model of Gibbs interface is used. The boundary conditions include both the state quantities of bulk phases are taken at the interface and the quantities characterizing interfacial surface such as the surface temperature and the surface heat flux. Introduction of the surface temp…
▽ More
Boundary conditions for the solid-liquid interface of the solidifying pure melt have been derived. In the derivation the model of Gibbs interface is used. The boundary conditions include both the state quantities of bulk phases are taken at the interface and the quantities characterizing interfacial surface such as the surface temperature and the surface heat flux. Introduction of the surface temperature as an independent variable allows us to describe the scattering energy at the interface. For the steady-state motion of the planar interface the expression for the temperature discontinuity across the phase boundary has been obtained. Effect of Kapitza resistance on the interface velocity is considered. It is shown that heat resistance leads to non-linearity in solidification kinetics, namely, in "velocity-undercooling" relationship. The conditions of the steady--state motion of the planar interface has been found.
△ Less
Submitted 1 November, 2016;
originally announced November 2016.
-
Solute trapping and diffusionless solidification in a binary system
Authors:
Peter Galenko
Abstract:
Numerous experimental data on the rapid solidification of binary systems exhibit the formation of metastable solid phases with the initial (nominal) chemical composition. This fact is explained by complete solute trapping leading to diffusionless (chemically partitionless) solidification at a finite growth velocity of crystals. Special attention is paid to developing a model of rapid solidificat…
▽ More
Numerous experimental data on the rapid solidification of binary systems exhibit the formation of metastable solid phases with the initial (nominal) chemical composition. This fact is explained by complete solute trapping leading to diffusionless (chemically partitionless) solidification at a finite growth velocity of crystals. Special attention is paid to developing a model of rapid solidification which describes a transition from chemically partitioned to diffusionless growth of crystals. Analytical treatments lead to the condition for complete solute trapping which directly follows from the analysis of the solute diffusion around the solid-liquid interface and atomic attachment and detachment at the interface. The resulting equations for the flux balance at the interface take into account two kinetic parameters: diffusion speed $V_{DI}$ on the interface and diffusion speed $V_D$ in bulk phases. The model describes experimental data on nonequilibrium solute partitioning in solidification of Si-As alloys [M.J. Aziz et al., J. Cryst. Growth {\bf 148}, 172 (1995); Acta Mater. {\bf 48}, 4797 (2000)] for the whole range of solidification velocity investigated.
△ Less
Submitted 1 September, 2007; v1 submitted 29 August, 2007;
originally announced August 2007.
-
Diffuse-interface model for rapid phase transformations in nonequilibrium systems
Authors:
Peter Galenko,
David Jou
Abstract:
A thermodynamic approach to rapid phase transformations within a diffuse interface in a binary system is developed. Assuming an extended set of independent thermodynamic variables formed by the union of the classic set of slow variables and the space of fast variables, we introduce finiteness of the heat and solute diffusive propagation at the finite speed of the interface advancing. To describe…
▽ More
A thermodynamic approach to rapid phase transformations within a diffuse interface in a binary system is developed. Assuming an extended set of independent thermodynamic variables formed by the union of the classic set of slow variables and the space of fast variables, we introduce finiteness of the heat and solute diffusive propagation at the finite speed of the interface advancing. To describe the transformation within the diffuse interface, we use the phase-field model which allows us to follow the steep but smooth change of phases within the width of diffuse interface. The governing equations of the phase-field model are derived for the hyperbolic model, model with memory, and for a model of nonlinear evolution of transformation within the diffuse-interface. The consistency of the model is proved by the condition of positive entropy production and by the outcomes of the fluctuation-dissipation theorem. A comparison with the existing sharp-interface and diffuse-interface versions of the model is given.
△ Less
Submitted 10 November, 2004;
originally announced November 2004.
-
Linear morphological stability analysis of the solid-liquid interface in rapid solidification of a binary system
Authors:
P. K. Galenko,
D. A. Danilov
Abstract:
The interface stability against small perturbations of the planar solid-liquid interface is considered analytically in linear approximation. Following the analytical procedure of Trivedi and Kurz (Trivedi R, Kurz W. Acta Metall 1986;34:1663), which is advancing the original treatment of morphological stability by Mullins and Sekerka (Mullins WW, Sekerka RF. J Appl Phys 1964;35:444) to the case o…
▽ More
The interface stability against small perturbations of the planar solid-liquid interface is considered analytically in linear approximation. Following the analytical procedure of Trivedi and Kurz (Trivedi R, Kurz W. Acta Metall 1986;34:1663), which is advancing the original treatment of morphological stability by Mullins and Sekerka (Mullins WW, Sekerka RF. J Appl Phys 1964;35:444) to the case of rapid solidification, we extend the model by introducing the local nonequilibrium in the solute diffusion field around the interface. A solution to the heat- and mass-transport problem around the perturbed interface is given in the presence of the local nonequilibrium solute diffusion. Using the developing local nonequilibrium model of solidification, the self-consistent analysis of linear morphological stability is presented with the attribution to the marginal (neutral) and absolute morphological stability of a rapidly moving interface. Special consideration of the interface stability for the cases of solidification in negative and positive thermal gradients is given. A quantitative comparison of the model predictions for the absolute morphological stability is presented with regard to experimental results of Hoglund and Aziz (Hoglund DE, Aziz MJ. Mat Res Soc Symp Proc 1992;205:325) on critical solute concentration for the interface breakdown during rapid solidification of Si--Sn alloys.
△ Less
Submitted 6 October, 2003;
originally announced October 2003.
