-
Gain compression in Josephson Traveling-Wave Parametric Amplifiers
Authors:
Gwenael Le Gal,
Guilliam Butseraen,
Arpit Ranadive,
Giulio Cappelli,
Bekim Fazliji,
Edgar Bonet,
Eric Eyraud,
Luca Planat,
Nicolas Roch
Abstract:
Superconducting traveling-wave parametric amplifiers (TWPAs) are increasingly used in various applications, including quantum computing, quantum sensing, and dark matter detection. However, one important characteristic of these amplifiers, gain compression, has not received much attention. As a result, there is a lack of comprehensive experimental exploration of this phenomenon in the existing lit…
▽ More
Superconducting traveling-wave parametric amplifiers (TWPAs) are increasingly used in various applications, including quantum computing, quantum sensing, and dark matter detection. However, one important characteristic of these amplifiers, gain compression, has not received much attention. As a result, there is a lack of comprehensive experimental exploration of this phenomenon in the existing literature. In this study, we present an experimental investigation of gain compression in a Josephson traveling-wave parametric amplifier based on a four-wave mixing process. We have implemented a novel setup to monitor the complex transmission of both the pump and signal tones, which allows us to simultaneously track pump depletion and signal amplification as functions of signal power and frequency across the entire bandwidth of the device. Our findings indicate that, while pump depletion occurs during gain compression, it is not the only mechanism involved in the saturation of a TWPA. Power-induced phase-matching processes also take place within the device. This study provides valuable insights for optimizing TWPAs for applications that require high total input power, such as multiplexed qubit readout or broadband photon emission.
△ Less
Submitted 26 May, 2025; v1 submitted 5 February, 2025;
originally announced February 2025.
-
A Traveling Wave Parametric Amplifier Isolator
Authors:
Arpit Ranadive,
Bekim Fazliji,
Gwenael Le Gal,
Giulio Cappelli,
Guilliam Butseraen,
Edgar Bonet,
Eric Eyraud,
Sina Böhling,
Luca Planat,
A. Metelmann,
Nicolas Roch
Abstract:
Superconducting traveling-wave parametric amplifiers have emerged as highly promising devices for near-quantum-limited broadband amplification of microwave signals and are essential for high quantum-efficiency microwave readout lines. Built-in isolation, as well as gain, would address their primary limitation: lack of true directionality due to potential backward travel of electromagnetic radiatio…
▽ More
Superconducting traveling-wave parametric amplifiers have emerged as highly promising devices for near-quantum-limited broadband amplification of microwave signals and are essential for high quantum-efficiency microwave readout lines. Built-in isolation, as well as gain, would address their primary limitation: lack of true directionality due to potential backward travel of electromagnetic radiation to their input port. Here, we demonstrate a Josephson-junction-based traveling-wave parametric amplifier isolator. It utilizes third-order nonlinearity for amplification and second-order nonlinearity for frequency upconversion of backward propagating modes to provide reverse isolation. These parametric processes, enhanced by a novel phase matching mechanism, exhibit gain of up to 20~dB and reverse isolation of up to 30~dB over a static 3~dB bandwidth greater than 500~MHz, while keeping near-quantum limited added noise. This demonstration of a broadband truly directional amplifier ultimately paves the way towards broadband quantum-limited microwave amplification lines without bulky magnetic isolators and with inhibited back-action.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Direct detection of down-converted photons spontaneously produced at a single Josephson junction
Authors:
Dorian Fraudet,
Izak Snyman,
Denis M. Basko,
Sébastien Léger,
Théo Sépulcre,
Arpit Ranadive,
Gwenael Le Gal,
Alba Torras-Coloma,
Serge Florens,
Nicolas Roch
Abstract:
We study spontaneous photon decay into multiple photons triggered by strong non-linearities in a superconducting quantum simulator of the boundary sine-Gordon impurity model. Previously, spectroscopic signatures of photon-conversion were reported and evidenced as resonances in the many-body spectrum of these systems. Here, we report on the observation of multi-mode fluorescence of a small Josephso…
▽ More
We study spontaneous photon decay into multiple photons triggered by strong non-linearities in a superconducting quantum simulator of the boundary sine-Gordon impurity model. Previously, spectroscopic signatures of photon-conversion were reported and evidenced as resonances in the many-body spectrum of these systems. Here, we report on the observation of multi-mode fluorescence of a small Josephson junction embedded in a high impedance superconducting transmission line. Measurement of the down-converted photons is achieved using state-of-the-art broadband parametric amplifiers. Photon triplet emission is explicitly demonstrated at a given frequency as the counterpart of inelastic photon decay at three-times the emission frequency. These results open exciting prospects for the burgeoning field of many-body quantum optics and offer a direct signature of the ultra-strong light-matter coupling.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Ohmic contact engineering in few-layer black Phosphorus field effect transistors
Authors:
Francesca Telesio,
Gwenael le Gal,
Manuel Serrano-Ruiz,
Federico Prescimone,
Stefano Toffanin,
Maurizio Peruzzini,
Stefan Heun
Abstract:
Achieving good quality Ohmic contacts to van der Waals materials is a challenge, since at the interface between metal and van der Waals material, different conditions can occur, ranging from the presence of a large energy barrier between the two materials to the metallization of the layered material below the contacts. In black phosphorus (bP), a further challenge is its high reactivity to oxygen…
▽ More
Achieving good quality Ohmic contacts to van der Waals materials is a challenge, since at the interface between metal and van der Waals material, different conditions can occur, ranging from the presence of a large energy barrier between the two materials to the metallization of the layered material below the contacts. In black phosphorus (bP), a further challenge is its high reactivity to oxygen and moisture, since the presence of uncontrolled oxidation can substantially change the behavior of the contacts. In this study, we investigate the influence of the metal used for the contacts to bP against the variability between different flakes and different samples, using three of the most used metals as contacts: Chromium, Titanium, and Nickel. Using the transfer length method, from an analysis of ten devices, both at room temperature and at low temperature, Ni results to be the best metal for Ohmic contacts to bP, providing the lowest contact resistance and minimum scattering between different devices. Moreover, we investigate the gate dependence of the current-voltage characteristics of these devices. In the accumulation regime, we observe good linearity for all metals investigated.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
