-
Experimental investigation of Lord Kelvins isentropic cooling and heating expression in tensile bars for two engineering alloys
Authors:
S. J. Burns,
C. E. Pratt,
J. Carrock,
J-P Gagnon,
A. B. Sefkow
Abstract:
Solids when rapidly and elastically stressed change temperature, the effect proposed by Lord Kelvin is adiabatic thermo-elastic cooling or heating depending on the sign of the stress. A fast sensitive IR camera has measured temperature both decreasing and increasing. Temperature measurements made from the reversible, elastic part of the stress-strain curve during fast uniaxial tensile loading have…
▽ More
Solids when rapidly and elastically stressed change temperature, the effect proposed by Lord Kelvin is adiabatic thermo-elastic cooling or heating depending on the sign of the stress. A fast sensitive IR camera has measured temperature both decreasing and increasing. Temperature measurements made from the reversible, elastic part of the stress-strain curve during fast uniaxial tensile loading have been investigated. The isentropic temperature cooling from the loading curve is recovered by heating after the specimen fractures when the load is released. These measurements establish for the first time isentropic thermal recovery in two engineering alloys. The materials tested are an AISI 4340 steel and an aluminum 2024 alloy. Measurements of the isentropic thermo-elastic stress cooling are -0.61 K/GPa for steel and -1.7 K/GPa for aluminum alloy. The isentropic thermo-elastic stress heating is -1.16 K/GPa for steel and -1.6 K/GPa for aluminum alloy. The isentropic, elastic part of the temperature is fully recoverable even after extensive plastic deformation upon fracture.
△ Less
Submitted 1 September, 2025; v1 submitted 10 November, 2023;
originally announced November 2023.
-
Renormalization of stochastic differential equations with multiplicative noise using effective potential methods
Authors:
Jean-Sebastien Gagnon,
David Hochberg,
Juan Perez-Mercader
Abstract:
We present a new method to renormalize stochastic differential equations subjected to multiplicative noise. The method is based on the widely used concept of effective potential in high energy physics, and has already been successfully applied to the renormalization of stochastic differential equations subjected to additive noise. We derive a general formula for the one-loop effective potential of…
▽ More
We present a new method to renormalize stochastic differential equations subjected to multiplicative noise. The method is based on the widely used concept of effective potential in high energy physics, and has already been successfully applied to the renormalization of stochastic differential equations subjected to additive noise. We derive a general formula for the one-loop effective potential of a single ordinary stochastic differential equation (with arbitrary interaction terms) subjected to multiplicative Gaussian noise (provided the noise satisfies a certain normalization condition). To illustrate the usefulness (and limitations) of the method, we use the effective potential to renormalize a toy chemical model based on a simplified Gray-Scott reaction. In particular, we use it to compute the scale dependence of the toy model's parameters (in perturbation theory) when subjected to a Gaussian power-law noise with short time correlations.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Selection and control of pathways by using externally adjustable noise on a stochastic cubic autocatalytic chemical system
Authors:
Jean-Sebastien Gagnon,
David Hochberg,
Juan Perez-Mercader
Abstract:
We investigate the effect of noisy feed rates on the behavior of a cubic autocatalytic chemical reaction model. By combining the renormalization group and stoichiometric network analysis, we demonstrate how externally adjustable random perturbations (extrinsic noise) can be used to select reaction pathways and therefore control reaction yields. This method is general and provides the means to expl…
▽ More
We investigate the effect of noisy feed rates on the behavior of a cubic autocatalytic chemical reaction model. By combining the renormalization group and stoichiometric network analysis, we demonstrate how externally adjustable random perturbations (extrinsic noise) can be used to select reaction pathways and therefore control reaction yields. This method is general and provides the means to explore the impact that changing statistical parameters in a noisy external environment (such as noisy feed rates, fluctuating reaction rates induced by noisy light, etc) has on chemical fluxes and pathways, thus demonstrating how external noise may be used to control, promote, direct and optimize chemical progress through a given reaction pathway.
△ Less
Submitted 30 November, 2018;
originally announced November 2018.
-
Effects of spatial and temporal noise on a cubic-autocatalytic reaction-diffusion model
Authors:
Jean-Sebastien Gagnon,
David Hochberg,
Juan Perez-Mercader
Abstract:
We characterize the influence that external noise, with both spatial and temporal correlations, has on the scale dependence of the reaction parameters of a cubic autocatalytic reaction diffusion (CARD) system. Interpreting the CARD model as a primitive reaction scheme for a living system, the results indicate that power-law correlations in environmental fluctuations can either decrease or increase…
▽ More
We characterize the influence that external noise, with both spatial and temporal correlations, has on the scale dependence of the reaction parameters of a cubic autocatalytic reaction diffusion (CARD) system. Interpreting the CARD model as a primitive reaction scheme for a living system, the results indicate that power-law correlations in environmental fluctuations can either decrease or increase the rates of nutrient decay and the rate of autocatalysis (replication) on small spatial and temporal scales.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
Small-scale properties of a stochastic cubic-autocatalytic reaction-diffusion model
Authors:
Jean-Sebastien Gagnon,
David Hochberg,
Juan Perez-Mercader
Abstract:
We investigate the small-scale properties of a stochastic cubic-autocatalytic reaction-diffusion (CARD) model using renormalization techniques. We renormalize noise-induced ultraviolet divergences and obtain beta functions for the decay rate and coupling at one-loop. Assuming colored (power law) noise, our results show that the behavior of both decay rate and coupling with scale depends crucially…
▽ More
We investigate the small-scale properties of a stochastic cubic-autocatalytic reaction-diffusion (CARD) model using renormalization techniques. We renormalize noise-induced ultraviolet divergences and obtain beta functions for the decay rate and coupling at one-loop. Assuming colored (power law) noise, our results show that the behavior of both decay rate and coupling with scale depends crucially on the noise exponent. Interpreting the CARD model as a proxy for a (very simple) living system, our results suggest that power law correlations in environmental fluctuations can both decrease or increase the growth of structures at smaller scales.
△ Less
Submitted 1 October, 2015;
originally announced October 2015.
-
Clues on chemical mechanisms from renormalizability: The example of a noisy cubic autocatalytic model
Authors:
Jean-Sebastien Gagnon,
Juan Perez-Mercader
Abstract:
We study the effect of noise on the renormalizability of a specific reaction-diffusion system of equations describing a cubic autocatalytic chemical reaction. The noise we are using is gaussian with power-law correlations in space, characterized by an amplitude $A$ and a noise exponent $y$. We show that changing the noise exponent is equivalent to the substitution…
▽ More
We study the effect of noise on the renormalizability of a specific reaction-diffusion system of equations describing a cubic autocatalytic chemical reaction. The noise we are using is gaussian with power-law correlations in space, characterized by an amplitude $A$ and a noise exponent $y$. We show that changing the noise exponent is equivalent to the substitution $d_{s} \rightarrow d_{\rm eff} = d_{s} - y$ and thus modifies the divergence structure of loop integrals ($d_{s}$ is the dimension of space). The model is renormalizable at one-loop for $d_{\rm eff} < 6$ and nonrenormalizable for $d_{\rm eff} \geq 6$. The effects of noise-generated higher order interactions are discussed. In particular, we show how noise induces new interaction terms that can be interpreted as a manifestation of some (internal) "chemical mechanism". We also show how ideas of effective field theory can be applied to construct a more fundamental chemical model for this system.
△ Less
Submitted 30 September, 2015;
originally announced September 2015.
-
X,Y,Z-Waves: Extended Structures in Nonlinear Lattices
Authors:
P. G. Kevrekidis,
J. Gagnon,
D. J. Frantzeskakis,
B. A. Malomed
Abstract:
Motivated by recent experimental and theoretical results on optical X-waves, we propose a new type of waveforms in 2D and 3D discrete media -- multi-legged extended nonlinear structures (ENS), built as arrays of lattice solitons (tiles or stones, in the 2D and 3D cases, respectively). First, we study the stability of the tiles and stones analytically, and then extend them numerically to complete…
▽ More
Motivated by recent experimental and theoretical results on optical X-waves, we propose a new type of waveforms in 2D and 3D discrete media -- multi-legged extended nonlinear structures (ENS), built as arrays of lattice solitons (tiles or stones, in the 2D and 3D cases, respectively). First, we study the stability of the tiles and stones analytically, and then extend them numerically to complete ENS forms for both 2D and 3D lattices. The predicted patterns are relevant to a variety of physical settings, such as Bose-Einstein condensates in deep optical lattices, lattices built of microresonators, photorefractive crystals with optically induced lattices (in the 2D case) and others.
△ Less
Submitted 14 March, 2006;
originally announced March 2006.
