-
Co-diffusion of hydrogen and oxygen for dense oxyhydride synthesis
Authors:
Masaya Fujioka,
Mihiro Hoshino,
Suguru Iwasaki,
Katsuhiro Nomura,
Aman Sharma,
Mineyuki Hattori,
Reina Utsumi,
Yuki Nakahira,
Hiroyuki Saitoh
Abstract:
Oxyhydrides are gaining attention for their diverse functionality. However, evaluating electron, ion, and phonon transport properties and comprehending their mechanism remains challenging due to the difficulty in oxyhydride synthesis involving the trade-off between achieving density sintering and preventing hydrogen evolution. High-temperature treatments, often required to reduce intergranular res…
▽ More
Oxyhydrides are gaining attention for their diverse functionality. However, evaluating electron, ion, and phonon transport properties and comprehending their mechanism remains challenging due to the difficulty in oxyhydride synthesis involving the trade-off between achieving density sintering and preventing hydrogen evolution. High-temperature treatments, often required to reduce intergranular resistance, typically cause hydrogen evolution before sufficient sintering. Instead of a post-annealing process aiming for strong chemical connections between oxyhydride particles, this research demonstrates a novel synthesis technique that converts pre-sintered bulk oxides into oxyhydrides while preserving the dense state. The process employs a high-pressure diffusion control method, facilitating the co-diffusion of hydride and oxide ions.
△ Less
Submitted 30 December, 2024;
originally announced December 2024.
-
Elemental Reactivity Maps for Materials Discovery
Authors:
Yuki Inada,
Masaya Fujioka,
Haruhiko Morito,
Tohru Sugahara,
Hisanori Yamane,
Yukari Katsura
Abstract:
When searching for novel inorganic materials, limiting the combination of constituent elements can greatly improve the search efficiency. In this study, we used machine learning to predict elemental combinations with high reactivity for materials discovery. The essential issue for such prediction is the uncertainty of whether the unreported combinations are non-reactive or not just investigated, t…
▽ More
When searching for novel inorganic materials, limiting the combination of constituent elements can greatly improve the search efficiency. In this study, we used machine learning to predict elemental combinations with high reactivity for materials discovery. The essential issue for such prediction is the uncertainty of whether the unreported combinations are non-reactive or not just investigated, though the reactive combinations can be easily collected as positive datasets from the materials databases. To construct the negative datasets, we developed a process to select reliable non-reactive combinations by evaluating the similarity between unreported and reactive combinations. The machine learning models were trained by both datasets and the prediction results were visualized by two-dimensional heatmaps: elemental reactivity maps to identify elemental combinations with high reactivity but no reported stable compounds. The maps predicted high reactivity (i.e., synthesizability) for the Co_Al_Ge ternary system, and two novel ternary compounds were synthesized: Co4Ge3.19Al0.81 and Co2Al1.24Ge1.76.
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
Novel Diamond Anvil Cell for Electrical Measurements using Boron-doped Metallic Diamond Electrodes
Authors:
R. Matsumoto,
Y. Sasama,
M. Fujioka,
T. Irifune,
M. Tanaka,
T. Yamaguchi,
H. Takeya,
Y. Takano
Abstract:
A novel diamond anvil cell suitable for electrical transport measurements under high pressure has been developed. A boron-doped metallic diamond film was deposited as an electrode onto a nano-polycrystalline diamond anvil using a microwave plasma-assisted chemical vapor deposition technique combined with electron beam lithography. The electrical transport measurements of Pb were performed up to 8…
▽ More
A novel diamond anvil cell suitable for electrical transport measurements under high pressure has been developed. A boron-doped metallic diamond film was deposited as an electrode onto a nano-polycrystalline diamond anvil using a microwave plasma-assisted chemical vapor deposition technique combined with electron beam lithography. The electrical transport measurements of Pb were performed up to 8 GPa, and the maximum pressure reached was above 30 GPa. The boron-doped metallic diamond electrodes showed no signs of degradation after repeated compression measurements.
△ Less
Submitted 17 March, 2016;
originally announced March 2016.
-
Pressure-Induced Superconductivity in BiS2-based EuFBiS2
Authors:
Kouji Suzuki,
Masashi Tanaka,
Saleem James Denholme,
Masaya Fujioka,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
We measured the electrical resistivity of a BiS2-based compound EuFBiS2 under high pressure. Polycrystalline EuFBiS2 shows insulator-metal transition and pressure-induced superconductivity above 0.7 GPa. The superconducting transition temperature increases with increasing applied pressure and shows the maximum value around 8.6 K at 1.8 GPa.
We measured the electrical resistivity of a BiS2-based compound EuFBiS2 under high pressure. Polycrystalline EuFBiS2 shows insulator-metal transition and pressure-induced superconductivity above 0.7 GPa. The superconducting transition temperature increases with increasing applied pressure and shows the maximum value around 8.6 K at 1.8 GPa.
△ Less
Submitted 29 October, 2015; v1 submitted 29 May, 2015;
originally announced May 2015.
-
Origin of the Higher-$T_\rm{c}$ Phase in the K$_x$Fe$_{2-y}$Se$_2$ System
Authors:
Masashi Tanaka,
Yusuke Yanagisawa,
Masaya Fujioka,
Saleem J. Denholme,
Shiro Funahashi,
Yoshitaka Matsushita,
Nobuo Ishizawa,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
Single crystals of K$_x$Fe$_{2-y}$Se$_2$ are prepared by quenching at various temperatures. The crystals obtained at higher quenching temperatures have a surface morphology with mesh-like texture. They show a sharp superconducting transition at $T_\rm{c}$ ~32 K with a large shielding volume fraction. On the other hand, the crystals prepared without quenching show an onset superconducting transitio…
▽ More
Single crystals of K$_x$Fe$_{2-y}$Se$_2$ are prepared by quenching at various temperatures. The crystals obtained at higher quenching temperatures have a surface morphology with mesh-like texture. They show a sharp superconducting transition at $T_\rm{c}$ ~32 K with a large shielding volume fraction. On the other hand, the crystals prepared without quenching show an onset superconducting transition at ~44 K and a zero resistivity around ~33 K, and they possess island-like regions on the surface with a larger amount of Fe incorporation. In-situ high-temperature single crystal X-ray diffraction measurements tell us the Fe-vacancy ordered phase is generated at a temperature region around 270 °C via iron diffusion. The creation of this Fe-vacancy ordered phase may become a driving force of the growth of the higher $T_\rm{c}$ phase. The superconductivity at ~44 K is attributed to a metallic phase with no Fe-vacancy.
△ Less
Submitted 25 February, 2016; v1 submitted 16 April, 2015;
originally announced April 2015.
-
Electrochemical deposition of FeSe on RABiTS tapes
Authors:
Satoshi Demura,
Masashi Tanaka,
Aichi Yamashita,
Saleem J. Denholme,
Hiroyuki Okazaki,
Masaya Fujioka,
Takahide Yamaguchi,
Hiroyuki Takeya,
Kazumasa Iida,
Bernhard Holzapfel,
Hideaki Sakata,
Yoshihiko Takano
Abstract:
FeSe film is successfully fabricated onto Rolling Assisted Biaxially Textured Substrate (RABiTS) tapes by an electrochemical deposition technique. The deposited FeSe films tend to become high crystallinity with a decrease in the applied voltage to -1.0 V, and the compositional ratio of Fe to Se approaches 1:1. The sample deposited at -1.0 V shows a superconducting transition approximately 8.0 K in…
▽ More
FeSe film is successfully fabricated onto Rolling Assisted Biaxially Textured Substrate (RABiTS) tapes by an electrochemical deposition technique. The deposited FeSe films tend to become high crystallinity with a decrease in the applied voltage to -1.0 V, and the compositional ratio of Fe to Se approaches 1:1. The sample deposited at -1.0 V shows a superconducting transition approximately 8.0 K in the magnetic susceptibility.
△ Less
Submitted 3 December, 2015; v1 submitted 29 December, 2014;
originally announced December 2014.
-
Site Selectivity on Chalcogen Atoms in Superconducting La(O,F)BiSSe
Authors:
Masashi Tanaka,
Takuma Yamaki,
Yoshitaka Matsushita,
Masaya Fujioka,
Saleem J. Denholme,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
Single crystals of La(O,F)BiSSe were successfully grown by a CsCl flux method. Single crystal X-ray structural analysis revealed that the crystal structure is isostructural with BiS$_2$- or BiSe$_2$-based compounds with space group $P4/nmm$ (lattice parameters $a$ = 4.1110(2) Å, $c$ = 13.6010(7) Å). However, the S atoms are selectively occupied at the apical site of the Bi-SSe pyramids in the supe…
▽ More
Single crystals of La(O,F)BiSSe were successfully grown by a CsCl flux method. Single crystal X-ray structural analysis revealed that the crystal structure is isostructural with BiS$_2$- or BiSe$_2$-based compounds with space group $P4/nmm$ (lattice parameters $a$ = 4.1110(2) Å, $c$ = 13.6010(7) Å). However, the S atoms are selectively occupied at the apical site of the Bi-SSe pyramids in the superconducting layer. The single crystals show a superconducting transition at 4.2 K in the magnetic susceptibility and resistivity measurement. The superconducting anisotropic parameter is determined to be 34 from its upper critical magnetic field. The anisotropy is in the same range with that of other members of the La(O,F)BiCh$_2$ ($Ch$ = S, Se) family under ambient pressure.
△ Less
Submitted 12 March, 2015; v1 submitted 29 December, 2014;
originally announced December 2014.
-
Pressure-dependent magnetization and magnetoresistivity studies on the tetragonal FeS (mackinawite): revealing its intrinsic metallic character
Authors:
S. J. Denholme,
H. Okazaki,
S. Demura,
K. Deguchi,
M. Fujioka,
T. Yamaguchi,
H. Takeya,
M. ElMassalami,
H. Fujiwara,
T. Wakita,
T. Yokoya,
Y. Takano
Abstract:
The transport and magnetic properties of the tetragonal Fe$_{1+δ}$S were investigated using magnetoresistivity and magnetization within 2$\leq T\leq $300 K, $H\leq$70 kOe and $P\leq$ 3.0 GPa. In addition, room-temperature X-ray diffraction and photoelectron spectroscopy were also applied. In contrast to previously reported nonmetallic character, Fe$_{1+δ}$S is intrinsically metallic but due to a p…
▽ More
The transport and magnetic properties of the tetragonal Fe$_{1+δ}$S were investigated using magnetoresistivity and magnetization within 2$\leq T\leq $300 K, $H\leq$70 kOe and $P\leq$ 3.0 GPa. In addition, room-temperature X-ray diffraction and photoelectron spectroscopy were also applied. In contrast to previously reported nonmetallic character, Fe$_{1+δ}$S is intrinsically metallic but due to a presence of a weak localization such metallic character is not exhibited below room temperature. An applied pressure reduces strongly this additional resistive contribution and as such enhances the temperature range of the metallic character which, for $\sim$3 GPa, is evident down to 75 K. The absence of superconductivity as well as the mechanism behind the weak localization will be discussed.
△ Less
Submitted 10 October, 2014;
originally announced October 2014.
-
Pressure-induced phase transition for single crystalline LaO0.5F0.5BiSe2
Authors:
Masaya Fujioka,
Masashi Tanaka,
Saleem J. Denholme,
Takuma Yamaki,
Hiroyuki Takeya,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We have demonstrated a pressure-induced phase transition from a low-Tc phase to a high-Tc phase in a single crystal of the superconductor LaO0.5F0.5BiSe2. The high-Tc phase appears at 2.16 GPa and the maximum superconducting transition temperature (Tc) is observed at 6.7 K under 2.44 GPa. Although the anisotropy (γ) for the low-Tc phase is estimated to be 20, it is reduced by around half (9.3) in…
▽ More
We have demonstrated a pressure-induced phase transition from a low-Tc phase to a high-Tc phase in a single crystal of the superconductor LaO0.5F0.5BiSe2. The high-Tc phase appears at 2.16 GPa and the maximum superconducting transition temperature (Tc) is observed at 6.7 K under 2.44 GPa. Although the anisotropy (γ) for the low-Tc phase is estimated to be 20, it is reduced by around half (9.3) in the high-Tc phase. This tendency is the same for the BiS2 system. The Tc of LaO0.5F0.5BiSe2 has continued to increase up to the maximum pressure of this study (2.44 GPa). Therefore applied further pressure has the potential to induce a much higher Tc in this system.
△ Less
Submitted 1 August, 2014;
originally announced August 2014.
-
Superconductivity in FeTe{1-x}S_x induced by electrochemical reaction using ionic liquid solution
Authors:
Aichi Yamashita,
Satoshi Demura,
Masashi Tanaka,
Keita Deguchi,
Takuma Yamaki,
Hiroshi Hara,
Kouji Suzuki,
Yunchao Zhang,
Saleem J. Denholme,
Hiroyuki Okazaki,
Masaya Fujioka,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
Superconductivity in FeTe0.8S0.2 is successfully induced by an electrochemical reaction using an ionic liquid solution. A clear correlation between the Fe concentration in the solution and the manifestation of superconductivity was confirmed, suggesting that superconductivity was induced by the deintercalation of excess iron.
Superconductivity in FeTe0.8S0.2 is successfully induced by an electrochemical reaction using an ionic liquid solution. A clear correlation between the Fe concentration in the solution and the manifestation of superconductivity was confirmed, suggesting that superconductivity was induced by the deintercalation of excess iron.
△ Less
Submitted 18 July, 2014;
originally announced July 2014.
-
High-Tc Phase of PrO0.5F0.5BiS2 single crystal induced by uniaxial pressure
Authors:
Masaya Fujioka,
Masanori Nagao,
Saleem J. Denholme,
Masashi Tanaka,
Hiroyuki Takeya,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We demonstrated a pressure-induced phase transition from a low-Tc phase (3.5 K) to a high-Tc phase (8.7 K) in single crystalline PrO0.5F0.5BiS2. The high-Tc phase is easily observed even at 0.7 GPa by uniaxial pressure obtained from a geometric effect of a single crystal with an extremely-thin thickness. For this phase transition, superconducting anisotropy and the coherence length along the c axi…
▽ More
We demonstrated a pressure-induced phase transition from a low-Tc phase (3.5 K) to a high-Tc phase (8.7 K) in single crystalline PrO0.5F0.5BiS2. The high-Tc phase is easily observed even at 0.7 GPa by uniaxial pressure obtained from a geometric effect of a single crystal with an extremely-thin thickness. For this phase transition, superconducting anisotropy and the coherence length along the c axis change from γ = 20 to 9.3 and from ξc = 0.56 to 0.71 nm respectively. It is suggested that a shrinkage in the c lattice constant by applied uniaxial pressure enhances the three dimensionality in the superconducting state.
△ Less
Submitted 19 July, 2014; v1 submitted 15 June, 2014;
originally announced June 2014.
-
First single crystal growth and structural analysis of superconducting layered bismuth oxyselenide; La(O,F)BiSe2
Authors:
Masashi Tanaka,
Masanori Nagao,
Yoshitaka Matsushita,
Masaya Fujioka,
Saleem J. Denholme,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
Single crystal of La(O,F)BiSe2 was successfully grown for the first time by the CsCl flux method. Single crystal X-ray structural analysis clearly showed that La(O,F)BiSe2 crystalizes with space group P4/nmm (lattice parameters a = 4.1408(2) Å, c = 14.1096(6) Å). The structure is composed of alternating BiSe2 and LaO layers. Magnetic susceptibility and resistivity measurements showed the supercond…
▽ More
Single crystal of La(O,F)BiSe2 was successfully grown for the first time by the CsCl flux method. Single crystal X-ray structural analysis clearly showed that La(O,F)BiSe2 crystalizes with space group P4/nmm (lattice parameters a = 4.1408(2) Å, c = 14.1096(6) Å). The structure is composed of alternating BiSe2 and LaO layers. Magnetic susceptibility and resistivity measurements showed the superconducting transition at 3.6 K, which is higher than that of as-grown La(O,F)BiS2. The structural analysis implies that La(O,F)BiSe2 is potential superconductor having higher Tc under high pressure.
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
Superconductivity in FeTe0.8S0.2 induced by battery-like reaction
Authors:
Aichi Yamashita,
Satoshi Demura,
Masashi Tanaka,
Keita Deguchi,
Takuma Yamaki,
Hiroshi Hara,
Kouji Suzuki,
Yunchao Zhang,
Saleem James Denholme,
Hiroyuki Okazaki,
Masaya Fujioka,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
Superconductivity is successfully induced by utilizing a battery-like reaction found in a typical Li-ion battery. Excess Fe in FeTe0.8S0.2 is electrochemically de-intercalated by applying a voltage in a citric acid solution. The superconducting properties improve with an increase in the applied voltage up to 1.5 V. This result suggests that an electrochemical reaction can be used as a novel method…
▽ More
Superconductivity is successfully induced by utilizing a battery-like reaction found in a typical Li-ion battery. Excess Fe in FeTe0.8S0.2 is electrochemically de-intercalated by applying a voltage in a citric acid solution. The superconducting properties improve with an increase in the applied voltage up to 1.5 V. This result suggests that an electrochemical reaction can be used as a novel method to develop new superconducting materials.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
-
Synthesis and physical properties of Ca1-xRExFeAs2 with RE = La ~ Gd
Authors:
Alberto Sala,
Hiroyuki Yakita,
Hiraku Ogino,
Tomoyuki Okada,
Akiyasu Yamamoto,
Kohji Kishio,
Shigeyuki Ishida,
Akira Iyo,
Hiroshi Eisaki,
Masaya Fujioka,
Yoshihiko Takano,
Marina Putti,
Jun-ichi Shimoyama
Abstract:
Synthesis of a series of layered iron arsenides Ca1-xRExFeAs2 (112) was attempted by heating at 1000 C under a high-pressure of 2 GPa. The 112 phase successfully forms with RE = La, Ce, Nd, Sm, Eu and Gd, while Tb, Dy and Ho substituted and RE free samples does not contain the 112 phase. The Ce, Nd, Sm, Eu and Gd doped Ca1-xRExFeAs2 are new compounds. All of them exhibit superconducting transition…
▽ More
Synthesis of a series of layered iron arsenides Ca1-xRExFeAs2 (112) was attempted by heating at 1000 C under a high-pressure of 2 GPa. The 112 phase successfully forms with RE = La, Ce, Nd, Sm, Eu and Gd, while Tb, Dy and Ho substituted and RE free samples does not contain the 112 phase. The Ce, Nd, Sm, Eu and Gd doped Ca1-xRExFeAs2 are new compounds. All of them exhibit superconducting transition except for the Ce doped sample. The behaviour of the critical temperature, with the RE ionic radii have been investigated.
△ Less
Submitted 10 April, 2014;
originally announced April 2014.
-
The effect of exceptionally high fluorine doping on the anisotropy of single crystalline SmFeAsO1-xFx
Authors:
Masaya Fujioka,
Saleem J. Denholme,
Masashi Tanaka,
Hiroyuki Takeya,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We succeeded in growing single crystalline SmFeAsO1-xFx with exceptionally high fluorine concentration by using a CsCl flux method. Comparing to conventional flux methods, this method can introduce about double the amount of fluorine into the oxygen site. The obtained single crystal shows the highest superconducting transition temperature (Tc = 57.5 K) in single crystalline iron pnictides. In addi…
▽ More
We succeeded in growing single crystalline SmFeAsO1-xFx with exceptionally high fluorine concentration by using a CsCl flux method. Comparing to conventional flux methods, this method can introduce about double the amount of fluorine into the oxygen site. The obtained single crystal shows the highest superconducting transition temperature (Tc = 57.5 K) in single crystalline iron pnictides. In addition, the residual resistivity ratio (RRR) is almost three times as large as that of previously reported single crystals. This suggests that our single crystals are suitable for investigation of the intrinsic superconducting properties since they have few defects and impurities. Using both the Werthamer-Helfand-Hohenberg model and the effective mass model, we demonstrated that a higher fluorine concentration suppresses the anisotropic superconductivity of SmFeAsO1-xFx.
△ Less
Submitted 9 July, 2014; v1 submitted 22 January, 2014;
originally announced January 2014.
-
Coexistence of bulk superconductivity and ferromagnetism in CeO1-xFxBiS2
Authors:
Satoshi Demura,
Keita Deguchi,
Yoshikazu Mizuguchi,
Kazuki Sato,
Ryouta Honjyo,
Aichi Yamashita,
Takuma Yamaki,
Hiroshi Hara,
Tohru Watanabe,
Saleem J. Denholme,
Masaya Fujioka,
Hiroyuki Okazaki,
Toshinori Ozaki,
Osuke Miura,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
We show the observation of the coexistence of bulk superconductivity and ferromagnetism in CeO1-xFxBiS2(x = 0 - 1.0) prepared by annealing under high-pressure. In CeO1-xFxBiS2 system, both superconductivity and two types of ferromagnetism with respective magnetic transition temperatures of 4.5 K and 7.5 K are induced upon systematic F substitution. This fact suggests that carriers generated by the…
▽ More
We show the observation of the coexistence of bulk superconductivity and ferromagnetism in CeO1-xFxBiS2(x = 0 - 1.0) prepared by annealing under high-pressure. In CeO1-xFxBiS2 system, both superconductivity and two types of ferromagnetism with respective magnetic transition temperatures of 4.5 K and 7.5 K are induced upon systematic F substitution. This fact suggests that carriers generated by the substitution of O by F are supplied to not only the BiS2 superconducting layers but also the CeO blocking layers. Furthermore, the highest superconducting transition temperature is observed when the ferromagnetism is also enhanced, which implies that superconductivity and ferromagnetism are linked to each other in the CeO1-xFxBiS2 system.
△ Less
Submitted 18 November, 2013;
originally announced November 2013.
-
Sulfur annealing effect for superconductivity in iron chalcogenide compounds
Authors:
K. Deguchi,
A. Yamashita,
T. Yamaki,
H. Hara,
S. Demura,
S. J. Denholme,
M. Fujioka,
H. Okazaki,
H. Takeya,
T. Yamaguchi,
Y. Takano
Abstract:
We discovered a novel annealing method for Fe-chalcogenide superconductors. It was found that sulfur annealing deintercalated excess Fe via formation of FeS2. Due to its specifics, sulfur annealing is applicable when preparing Fe-chalcogenide-based wires or cables.
We discovered a novel annealing method for Fe-chalcogenide superconductors. It was found that sulfur annealing deintercalated excess Fe via formation of FeS2. Due to its specifics, sulfur annealing is applicable when preparing Fe-chalcogenide-based wires or cables.
△ Less
Submitted 26 August, 2013;
originally announced August 2013.
-
Phase diagram and superconductivity at 58.1 K in α-FeAs free SmFeAsO1-xFx
Authors:
Masaya Fujioka,
Saleem James Denholme,
Toshinori Ozaki,
Hiroyuki Okazaki,
Keita Deguchi,
Satoshi Demura,
Hiroshi Hara,
Tohru Watanabe,
Hiroyuki Takeya,
Takahide Yamaguchi,
Hiroaki Kumakura,
Yoshihiko Takano
Abstract:
The Phase diagram of SmFeAsO1-xFx in terms of x is exhibited in this study. SmFeAsO1-xFx from x = 0 to x = 0.3 were prepared by low temperature sintering with slow cooling. The low temperature sintering suppresses the formation of the amorphous FeAs, which is inevitably produced as an impurity by using high temperature sintering. Moreover, slow cooling is effective to obtain the high fluorine conc…
▽ More
The Phase diagram of SmFeAsO1-xFx in terms of x is exhibited in this study. SmFeAsO1-xFx from x = 0 to x = 0.3 were prepared by low temperature sintering with slow cooling. The low temperature sintering suppresses the formation of the amorphous FeAs, which is inevitably produced as an impurity by using high temperature sintering. Moreover, slow cooling is effective to obtain the high fluorine concentration. The compositional change from feedstock composition is quite small after this synthesis. We can reproducibly observe a record superconducting transition for an iron based superconductor at 58.1 K. This achievement of a high superconducting transition is due to the success in a large amount of fluorine substitution. A shrinking of the a lattice parameter caused by fluorine substitution is observed and the substitutional rate of fluorine changes at x =0.16.
△ Less
Submitted 16 July, 2013; v1 submitted 15 March, 2013;
originally announced March 2013.
-
α-FeAs-free SmFeAsO1-xFx by low temperature sintering with slow cooling
Authors:
Masaya Fujioka,
Saleem James Denholme,
Toshinori Ozaki,
Hiroyuki Okazaki,
Keita Deguchi,
Satoshi Demura,
Hiroshi Hara,
Tohru Watanabe,
Hiroyuki Takeya,
Takahide Yamaguchi,
Hiroaki Kumakura,
Yoshihiko Takano
Abstract:
We obtained amorphous-FeAs-free SmFeAsO1-xFx using a low temperature sintering with slow cooling. SmFeAsO1-xFx is sintered at 980 °C for 40 hours and cooled slowly down to 600 °C. The low temperature sintering suppresses the formation of amorphous FeAs, and the slow cooling introduces much fluorine into SmFeAsO1-xFx. The superconductivity of this sample appears at 57.8 K and the superconducting vo…
▽ More
We obtained amorphous-FeAs-free SmFeAsO1-xFx using a low temperature sintering with slow cooling. SmFeAsO1-xFx is sintered at 980 °C for 40 hours and cooled slowly down to 600 °C. The low temperature sintering suppresses the formation of amorphous FeAs, and the slow cooling introduces much fluorine into SmFeAsO1-xFx. The superconductivity of this sample appears at 57.8 K and the superconducting volume fraction reaches 96 %. To study the change of fluorine concentration during the cooling process, samples are quenched by water at 950 °C, 900 °C, 850 °C, 800 °C, 750 °C and 700 °C. It is found that fluorine is substituted not only at the maximum heating temperature but also during the cooling process. The low temperature sintering with slow cooling is very effective to obtain a homogeneous SmFeAsO1-xFx with high fluorine concentration.
△ Less
Submitted 7 August, 2013; v1 submitted 6 March, 2013;
originally announced March 2013.
-
The effect of simultaneous substitution on the electronic band structure and thermoelectric properties of Se-doped Co3SnInS2 with the Kagome lattice
Authors:
Masaya Fujioka,
Taizo Shibuya,
Junya Nakai,
Keigo Yoshiyasu,
Yuki Sakai,
Yoshihiko Takano,
Yoichi Kamihara,
Masanori Matoba
Abstract:
The thermoelectric properties and electronic band structures for Se-doped Co3SnInS2 were examined. The parent compound of this material (Co3Sn2S2) has two kinds of Sn sites (Sn1 and Sn2 sites). The density functional theory (DFT) calculations show that the indium substitution at the Sn2 site induces a metallic band structure, on the other hand, a semiconducting band structure is obtained from subs…
▽ More
The thermoelectric properties and electronic band structures for Se-doped Co3SnInS2 were examined. The parent compound of this material (Co3Sn2S2) has two kinds of Sn sites (Sn1 and Sn2 sites). The density functional theory (DFT) calculations show that the indium substitution at the Sn2 site induces a metallic band structure, on the other hand, a semiconducting band structure is obtained from substitution at the Sn1 site. However, according to the previous reports, since the indium atom prefers to replace the tin atom at the Sn1 site rather than the Sn2 site, the resistivity of Co3SnInS2 shows semiconducting-like behavior. In this study we have demonstrated that metallic behavior and a decrease in resistivity for Se-doped Co3SnInS2 occurs without suppression of the Seebeck coefficient. From the DFT calculations, when the selenium content is above 0.5, the total crystallographic energy shows that a higher indium occupancy at Sn2 site is more stable. Therefore, it is suggested that the selenium doping suppress the site preference for indium substitution. This is one of the possible explanations for the metallic conductivity observed in Se-doped Co3SnInS2
△ Less
Submitted 15 October, 2014; v1 submitted 19 November, 2012;
originally announced November 2012.
-
Superconductivity in Fe1+dTe0.9Se0.1 induced by deintercalation of excess Fe using alcoholic beverage treatment
Authors:
K. Deguchi,
S. Demura,
H. Hara,
T. Watanabe,
S. J. Denholme,
M. Fujioka,
H. Okazaki,
T. Ozaki,
H. Takeya,
T. Yamaguchi,
Y. Takano
Abstract:
Superconductivity in polycrystalline Fe1+dTe0.9Se0.1 was enhanced by heating in alcoholic beverages. We found that part of the excess Fe was deintercalated from the interlayer sites by the treatment and the shielding volume fractions were increased with the reduction of excess Fe content in sample. This behavior is similar to the case of Fe1+dTe1-xSx. Thus the technique of alcoholic beverage treat…
▽ More
Superconductivity in polycrystalline Fe1+dTe0.9Se0.1 was enhanced by heating in alcoholic beverages. We found that part of the excess Fe was deintercalated from the interlayer sites by the treatment and the shielding volume fractions were increased with the reduction of excess Fe content in sample. This behavior is similar to the case of Fe1+dTe1-xSx. Thus the technique of alcoholic beverage treatment can be applied generally to the Fe-chalcogenide superconductors.
△ Less
Submitted 22 October, 2012;
originally announced October 2012.
-
Effect of the indium addition on the superconducting property and the impurity phase in polycrystalline SmFeAsO1-xFx
Authors:
Masaya Fujioka,
Toshinori Ozaki,
Hiroyuki Takeya,
Keita Deguchi,
Satoshi Demura,
Hiroshi Hara,
Tohru Watanabe,
Denholme Saleem James,
Hiroyuki Okazaki,
Takahide Yamaguchi,
Hiroaki Kumakura,
Yoshihiko Takano
Abstract:
We report enhancement in the magnetic critical current density of indium added polycrystalline SmFeAsO1-xFx. The value of magnetic Jc is around 25 kA/cm2 at 4.2 K under self-magnetic field. Polycrystalline SmFeAsO1-xFx is mainly composed of the superconducting grains and a little of amorphous FeAs compounds. These areas randomly co-exist and amorphous areas are located between superconducting grai…
▽ More
We report enhancement in the magnetic critical current density of indium added polycrystalline SmFeAsO1-xFx. The value of magnetic Jc is around 25 kA/cm2 at 4.2 K under self-magnetic field. Polycrystalline SmFeAsO1-xFx is mainly composed of the superconducting grains and a little of amorphous FeAs compounds. These areas randomly co-exist and amorphous areas are located between superconducting grains. Therefore, the superconducting current is prevented by the amorphous areas. In this study, it is found that indium addition to polycrystalline SmFeAsO1-xFx removes these amorphous areas and induces the bringing together the superconducting grains. It means the total contact surfaces of grains are increased. We suggest that the enhancement of the magnetic critical current density is a direct effect of the indium addition.
△ Less
Submitted 21 October, 2012;
originally announced October 2012.
-
Evolution of superconductivity in LaO1-xFxBiS2 prepared by high pressure technique
Authors:
K. Deguchi,
Y. Mizuguchi,
S. Demura,
H. Hara,
T. Watanabe,
S. J. Denholme,
M. Fujioka,
H. Okazaki,
T. Ozaki,
H. Takeya,
T. Yamaguchi,
O. Miura,
Y. Takano
Abstract:
Novel BiS2-based superconductors LaO1-xFxBiS2 prepared by the high pressure synthesis technique were systematically studied. It was found that the high pressure annealing strongly the lattice as compared to the LaO1-xFxBiS2 samples prepared by conventional solid state reaction at ambient pressure. Bulk superconductivity was observed within a wide F-concentration range of x = 0.2 ~ 0.7. On the basi…
▽ More
Novel BiS2-based superconductors LaO1-xFxBiS2 prepared by the high pressure synthesis technique were systematically studied. It was found that the high pressure annealing strongly the lattice as compared to the LaO1-xFxBiS2 samples prepared by conventional solid state reaction at ambient pressure. Bulk superconductivity was observed within a wide F-concentration range of x = 0.2 ~ 0.7. On the basis of those results, we have established a phase diagram of LaO1-xFxBiS2.
△ Less
Submitted 18 September, 2012;
originally announced September 2012.
-
Evolution of superconductivity in isovalent Te-substituted KxFe2-ySe2 crystals
Authors:
Toshinori Ozaki,
Hiroyuki Takeya,
Keita Deguchi,
Satoshi Demura,
Hiroshi Hara,
Tohru Watanabe,
Denholme Saleem James,
Hiroyuki Okazaki,
Masaya Fujioka,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We report the evolution of superconductivity and the phase diagram of the KxFe2-ySe2-zTez (z=0-0.6) crystals grown by a simple one-step synthesis. No structural transition is observed in any crystals, while lattice parameters exhibit a systematic expansion with Te content. The Tc exhibits a gradual decrease with increasing Te content from Tconset = 32.9 K at z = 0 to Tconset = 27.9 K at z = 0.5, f…
▽ More
We report the evolution of superconductivity and the phase diagram of the KxFe2-ySe2-zTez (z=0-0.6) crystals grown by a simple one-step synthesis. No structural transition is observed in any crystals, while lattice parameters exhibit a systematic expansion with Te content. The Tc exhibits a gradual decrease with increasing Te content from Tconset = 32.9 K at z = 0 to Tconset = 27.9 K at z = 0.5, followed by a sudden suppression of superconductivity at z = 0.6. Upon approaching a Te concentration of 0.6, the shielding volume fraction decreases and eventually drops to zero. Simultaneously, hump positions in r-T curve shift to lower temperatures. These results suggest that isovalent substitution of Te for Se in KxFe2-ySe2 crystals suppresses the superconductivity in this system.
△ Less
Submitted 2 April, 2013; v1 submitted 10 September, 2012;
originally announced September 2012.
-
BiS2 - based superconductivity in F-substituted NdOBiS2
Authors:
Satoshi Demura,
Yoshikazu Mizuguchi,
Keita Deguchi,
Hiroyuki Okazaki,
Hiroshi Hara,
Tohru Watanabe,
Saleem James Denholme,
Masaya Fujioka,
Toshinori Ozaki,
Hiroshi Fujihisa,
Yoshito Gotoh,
Osuke Miura,
Takahide Yamaguchi,
Hiroyuki Takeya,
Yoshihiko Takano
Abstract:
We have successfully synthesized a new BiS2-based superconductor NdOBiS2 with F-doping. This compound is composed of superconducting BiS2 layers and blocking NdO layers, which indicates that the BiS2 layer is the one of the common superconducting layers like the CuO2 layer of cuprates or Fe-As layer of Fe-based superconductors. We can obtain NdO1-xFxBiS2 with bulk superconductivity by a solid-stat…
▽ More
We have successfully synthesized a new BiS2-based superconductor NdOBiS2 with F-doping. This compound is composed of superconducting BiS2 layers and blocking NdO layers, which indicates that the BiS2 layer is the one of the common superconducting layers like the CuO2 layer of cuprates or Fe-As layer of Fe-based superconductors. We can obtain NdO1-xFxBiS2 with bulk superconductivity by a solid-state reaction under ambient pressure. Therefore, NdO1-xFxBiS2 should be the suitable material to elucidate the mechanism of superconductivity in the BiS2-layer.
△ Less
Submitted 22 July, 2012;
originally announced July 2012.
-
Analysis of interdiffusion between SmFeAsO0.92F0.08 and metals for ex situ fabrication of superconducting wire
Authors:
Masaya Fujioka,
Masanori Matoba,
Toshinori Ozaki,
Yoshihiko Takano,
Hiroaki Kumakura,
Yoichi Kamihara
Abstract:
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the…
▽ More
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the F content, thereby preventing a decrease in the superconducting transition temperature and a shrinking of the superconducting volume fraction. Thus, in the superconducting Sm-1111 wire with the binder, the transport critical current density reaches the highest value of ~4000 A/cm2 at 4.2 K.
△ Less
Submitted 28 June, 2011; v1 submitted 7 June, 2011;
originally announced June 2011.
-
Effective Ex-Situ Fabrication of F-Doped SmFeAsO Wire for High Transport Critical Current Density
Authors:
Masaya Fujioka,
Tomohiro Kota,
Masanori Matoba,
Toshinori Ozaki,
Yoshihiko Takano,
Hiroaki Kumakura,
Yoichi Kamihara
Abstract:
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the…
▽ More
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the F content, thereby preventing a decrease in the superconducting transition temperature and a shrinkage of the superconducting volume fraction. Thus, in the superconducting Sm-1111 wire with the binder, the transport critical current density reaches the highest value of ~4 kA/cm2 at 4.2 K.
△ Less
Submitted 28 June, 2011; v1 submitted 17 May, 2011;
originally announced May 2011.
