Showing 1–9 of 9 results for author: Frechette, J

Interface stabilization in adhesion caused by elastohydrodynamic deformation

Authors: Preetika Karnal, Yumo Wang, Anushka Jha, Stefan Gryska, Carlos Barrios, Joelle Frechette

Abstract: Interfacial instabilities are common phenomena observed during adhesion measurements involving viscoelastic polymers or fluids. Typical probe-tack adhesion measurements with soft adhesives are conducted with rigid probes. However, in many settings, such as for medical applications, adhesives make and break contact from soft surfaces such as skin. Here we study how detachment from soft probes alter… ▽ More Interfacial instabilities are common phenomena observed during adhesion measurements involving viscoelastic polymers or fluids. Typical probe-tack adhesion measurements with soft adhesives are conducted with rigid probes. However, in many settings, such as for medical applications, adhesives make and break contact from soft surfaces such as skin. Here we study how detachment from soft probes alters the debonding mechanism of a model viscoelastic polymer film. We demonstrate that detachment from a soft probe suppresses Saffman-Taylor instabilities commonly encountered in adhesion. We suggest the mechanism for interface stabilization is elastohydrodynamic deformation of the probe and propose a scaling for the onset of stabilization. △ Less

Submitted 18 September, 2023; originally announced September 2023.

Comments: 7 pages, 5 figures

Adhesion of fluid infused silicone elastomer to glass

Authors: Anushka Jha, Preetika Karnal, Joelle Frechette

Abstract: Elastomers swollen with non-polar fluids show potential as anti-adhesive materials. We study the effect of oil fraction and contact time on the adhesion between swollen spherical probes of PDMS (polydimethylsiloxane) and flat glass surfaces. The PDMS probes are swollen with pre-determined amount of 10 cSt silicone oil to span the range where the PDMS is fluid free (via solvent extraction) up to th… ▽ More Elastomers swollen with non-polar fluids show potential as anti-adhesive materials. We study the effect of oil fraction and contact time on the adhesion between swollen spherical probes of PDMS (polydimethylsiloxane) and flat glass surfaces. The PDMS probes are swollen with pre-determined amount of 10 cSt silicone oil to span the range where the PDMS is fluid free (via solvent extraction) up to the limit where it is oil saturated. Probe tack measurements show that adhesion decreases rapidly with an increase in oil fraction. The decrease in adhesion is attributed to excess oil present at the PDMS-air interface. Contact angle measurements and optical microscopy images support this observation. Adhesion also increases with contact time for a given oil fraction. The increase in adhesion with contact time can be interpreted through different competing mechanisms that depend on the oil fraction where the dominant mechanism changes from extracted to fully swollen PDMS. For partially swollen PDMS, we observe that adhesion initially increases because of viscoelastic relaxation and at long times increases because of contact aging. In contrast, adhesion between fully swollen PDMS and glass barely increases over time and is mainly due to capillary forces. While the relaxation of PDMS in contact is well-described by a visco-poroelastic model, we do not see evidence that poroelastic relaxation of the PDMS contributes to an increase of adhesion with glass whether it is partially or fully swollen. △ Less

Submitted 4 November, 2022; originally announced November 2022.

Journal ref: Soft Matter, 2022,18, 7579-7592

Role of Hydrodynamic Drainage in Adhesion to Wet Surfaces

Authors: Rohini Gupta, Joelle Frechette

Abstract: Tree frogs possess soft structured toe pads with channels that help squeeze out fluid from the region between the toe pad and the contacting surfaces. This structure enables them to walk on wet and rough surfaces. We present our preliminary result aiming at understanding the role of surface structure on hydrodynamic drainage forces. We have used the surface forces apparatus to measure the drainage… ▽ More Tree frogs possess soft structured toe pads with channels that help squeeze out fluid from the region between the toe pad and the contacting surfaces. This structure enables them to walk on wet and rough surfaces. We present our preliminary result aiming at understanding the role of surface structure on hydrodynamic drainage forces. We have used the surface forces apparatus to measure the drainage forces (approach and retraction) in silicone oil. We compare the drainage force measured between two smooth PMMA surfaces with the one measure when one of the two surfaces has a structure with channels. We have observed that the presence of channels reduces the hydrodynamic drainage forces when the surfaces come together and reduces the adhesion when the surfaces are pulled apart. Our force measurements were compared to Reynolds theory and we discuss the possible role of elastohydrodynamic deformation in tree frog adhesion. △ Less

Submitted 15 April, 2022; originally announced April 2022.

Comments: The Adhesion Society Annual Meeting 2011

Elastic deformation during dynamic force measurements in viscous fluids

Authors: Yumo Wang, Georgia Pilkington, Charles Dhong, Joelle Frechette

Abstract: Understanding and harnessing the coupling between lubrication pressure and elasticity provides materials design strategies for applications such as adhesives, coatings, microsensors, and biomaterials. Elastic deformation of compliant solids caused by viscous forces can also occur during dynamic force measurements in instruments such as the surface forces apparatus (SFA) or the atomic force microsc… ▽ More Understanding and harnessing the coupling between lubrication pressure and elasticity provides materials design strategies for applications such as adhesives, coatings, microsensors, and biomaterials. Elastic deformation of compliant solids caused by viscous forces can also occur during dynamic force measurements in instruments such as the surface forces apparatus (SFA) or the atomic force microscope (AFM). We briefly review hydrodynamic interactions in the presence of soft, deformable interfaces in the lubrication limit. More specifically, we consider the scenario of two surfaces approaching each other in a viscous fluid where one or both surfaces is deformable, which is also relevant to many force measurement systems. In this article the basic theoretical background of the elastohydrodynamic problem is detailed, followed by a discussion of experimental validation and considerations, especially for the role of elastic deformation on surface forces measurements. Finally, current challenges to our understanding of soft hydrodynamic interactions, such as the consideration of substrate layering, poroelasticity, viscoelasticity, surface heterogeneity, as well as their implications are discussed. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Morphology of soft and slippery contact via fluid drainage

Authors: Yumo Wang, Joelle Frechette

Abstract: The dynamic of contact formation between soft materials immersed in a fluid is accompanied by fluid drainage and elastic deformation. As a result, controlling the coupling between lubrication pressure and elasticity provides strategies to design materials with reversible and dynamic adhesion to wet or flooded surfaces. We characterize the elastic deformation of a soft coating with nanometer-scale… ▽ More The dynamic of contact formation between soft materials immersed in a fluid is accompanied by fluid drainage and elastic deformation. As a result, controlling the coupling between lubrication pressure and elasticity provides strategies to design materials with reversible and dynamic adhesion to wet or flooded surfaces. We characterize the elastic deformation of a soft coating with nanometer-scale roughness as it approaches and contacts a rigid surface in a fluid environment. The lubrication pressure during the approach causes elastic deformation and prevents contact formation. We observe deformation profiles that are drastically different from those observed for elastic half-space when the thickness of the soft coating is comparable to the hydrodynamic radius. In contrast, we show that surface roughness favors fluid drainage without altering the elastic deformation. As a result, the coupling between elasticity and slip (caused by surface roughness) can lead to trapped fluid pockets in the contact region. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Elastic Deformation of Soft Coatings Due to Lubrication Forces

Authors: Yumo Wang, Matthew R. Tan, Joelle Frechette

Abstract: Elastic deformation of rigid materials with soft coatings (stratified materials) due to lubrication forces can also alter the interpretation of dynamic surface forces measurements and prevent contact formation between approaching surfaces. Understanding the role of elastic deformation on the process of fluid drainage is necessary, and the case where one (or both) of the interacting materials consi… ▽ More Elastic deformation of rigid materials with soft coatings (stratified materials) due to lubrication forces can also alter the interpretation of dynamic surface forces measurements and prevent contact formation between approaching surfaces. Understanding the role of elastic deformation on the process of fluid drainage is necessary, and the case where one (or both) of the interacting materials consists of a rigid substrate with a soft coating is still limited. We combine lubrication theory and solid linear elasticity to describe the dynamic of fluid drainage past a compliant stratified boundary. The analysis presented covers the full range of coating thicknesses, from an elastic foundation to a half-space for an incomressible coating. We decouple the individual contributions of the coating thickness and material properties on the elastic deformation, hydrodynamic forces, and fluid film thickness. We obtain a simple expression for the shift in contact position during force measurements that is valid for many experimental conditions. We compare directly the effect of stratification on the out-of-contact deformation to the well-known effect of stratification on indentation. We show that corrections developed for stratification in contact mechanics are not applicable to elastohydrodynamic deformation. Finally, we provide generalized contour maps that can be employed directly to estimate the elastic deformation present in most dynamic surface force measurements. △ Less

Submitted 17 August, 2017; originally announced August 2017.

Micropatterned Charge Heterogeneities via Vapor Deposition of Aminosilanes

Authors: Christian Pick, Christopher Argento, German Drazer, Joelle Frechette

Abstract: Aminosilanes are routinely employed for charge reversal or to create coupling layers on oxide surfaces. We present a chemical vapor deposition method to pattern mica surfaces with regions of high-quality aminosilane (3-aminopropyltriethoxysilane, APTES) monolayers. The approach relies on the vapor deposition of an aminosilane through a patterned array of through-holes in a PDMS (poly(dimethylsilox… ▽ More Aminosilanes are routinely employed for charge reversal or to create coupling layers on oxide surfaces. We present a chemical vapor deposition method to pattern mica surfaces with regions of high-quality aminosilane (3-aminopropyltriethoxysilane, APTES) monolayers. The approach relies on the vapor deposition of an aminosilane through a patterned array of through-holes in a PDMS (poly(dimethylsiloxane)) membrane that acts as a mask. In aqueous solutions the surfaces have regular patterns of charge heterogeneities with minimal topographical variations over large areas. This versatile dry lift-off deposition method alleviates issues with multilayer formation and can be used to create charge patterns on curved surfaces. We identify the necessary steps to achieve high quality monolayers and charge reversal of the underlying mica surface: 1) hexane extraction to remove unreacted PDMS oligomers from the membrane that would otherwise deposit on and contaminate the substrate, 2) oxygen plasma treatment of the top of the membrane surfaces to generate a barrier layer that blocks APTES transport through the PDMS, and 3) decrease of the vapor pressure of APTES during deposition to minimize APTES condensation at the mica-membrane-vapor contact lines and to prevent multilayer formation. Under these conditions, AFM imaging shows that the monolayers have a height of 0.9nm with an increase in height up to 3nm at the mica-membrane-vapor contact lines. Fluorescence imaging demonstrates pattern fidelity on both flat and curved surfaces, for feature sizes that vary between 6.5-40 um. We verify charge reversal by measuring the double layer forces between a homogeneous APTES monolayers and a mica surface in aqueous solution and we characterize the surface potential of APTES monolayers by measuring the double layer forces between identical APTES surfaces. We obtain a surface potential of 110mV at pH 4.0. △ Less

Submitted 16 September, 2016; originally announced September 2016.

Journal ref: Langmuir 31(39), pp 10725-10733 (2015)

Out-of-contact elastohydrodynamic deformation due to lubrication forces

Authors: Yumo Wang, Charles Dhong, Joelle Frechette

Abstract: We characterize the spatiotemporal deformation of an elastic film during the radial drainage of fluid from a narrowing gap. Elastic deformation of the film takes the form of a dimple and prevents full contact to be reached. With thinner elastic film the stress becomes increasingly supported by the underlying rigid substrate and the dimple formation is suppressed, which allows the surfaces to reach… ▽ More We characterize the spatiotemporal deformation of an elastic film during the radial drainage of fluid from a narrowing gap. Elastic deformation of the film takes the form of a dimple and prevents full contact to be reached. With thinner elastic film the stress becomes increasingly supported by the underlying rigid substrate and the dimple formation is suppressed, which allows the surfaces to reach full contact. We highlight the lag due to viscoelasticity on the surface profiles, and that for a given fluid film thickness deformation leads to stronger hydrodynamic forces than for rigid surfaces. △ Less

Submitted 20 November, 2015; v1 submitted 19 November, 2015; originally announced November 2015.

Comments: 11 pages, 4 figures

Coupled effects of applied load and surface structure on the viscous forces during peeling

Authors: Charles Dhong, Joelle Frechette

Abstract: Tree frogs are able take advantage of an interconnected network of epithelial cells in their toe pads to modulate their adhesion to surfaces under dry, wet, and flooded environments. It has been hypothesized that these interconnected drainage channels reduce the hydrodynamic repulsion to facilitate contact under a completely submerged environment (flooded conditions). Using a custom-built apparatu… ▽ More Tree frogs are able take advantage of an interconnected network of epithelial cells in their toe pads to modulate their adhesion to surfaces under dry, wet, and flooded environments. It has been hypothesized that these interconnected drainage channels reduce the hydrodynamic repulsion to facilitate contact under a completely submerged environment (flooded conditions). Using a custom-built apparatus we investigate the interplay between surface structure and loading conditions on the peeling force. By combining a normal approach and detachment by peeling we can isolate the effects of surface structure from the loading conditions. We investigate three surfaces: two rigid structured surfaces that consist of arrays of cylindrical posts and a flat surface as a control. We observe three regimes in the work required to separate the structured surface that depend on the fluid film thickness prior to pull out. These three regimes are based on hydrodynamics and our experimental results agree with a simple scaling argument that relates the surface features to the different regimes observed. Overall we find that the work of separation of a structured surface is always less than or equal to the one for a smooth surface when considering purely viscous contributions. △ Less

Submitted 7 February, 2015; originally announced February 2015.

Comments: in press Soft Matter, 23 pages, 7 figures