-
Exploring the potential of combining over- and under-stoichiometric MIEC materials for Oxygen-Ion Batteries
Authors:
Silvère Panisset,
Alexander Schmid,
Alexander Stangl,
Juergen Fleig,
David Jauffres,
Mónica Burriel
Abstract:
The increasing demand for energy storage solutions has spurred intensive research into next-generation battery technologies. Oxygen-ion batteries (OIBs), which leverage mixed ionic-electronic conducting (MIEC) oxides, have emerged as promising candidates due to their solid, non-flammable nature and potential for high power densities. This study investigates the use of over-stoichiometric La2NiO4+d…
▽ More
The increasing demand for energy storage solutions has spurred intensive research into next-generation battery technologies. Oxygen-ion batteries (OIBs), which leverage mixed ionic-electronic conducting (MIEC) oxides, have emerged as promising candidates due to their solid, non-flammable nature and potential for high power densities. This study investigates the use of over-stoichiometric La2NiO4+delta (L2NO4) as a cathode material for OIBs, exploring its capacity for electrochemical energy storage. Half-cell measurements reveal that L2NO4 with a closed-pore microstructure can store oxygen, achieving a volumetric charge of 63 mA.h.cm-3 at 400 °C with a current density of 3.6 uA.cm-2 and potentials up to 0.75 V vs. 1 bar O2. Additionally, a functional full cell combining over-stoichiometric L2NO4 and under-stoichiometric La0.5Sr0.5Cr0.2Mn0.8O3-delta (LSCrMn) has been successfully developed, demonstrating excellent cyclability and coulomb efficiency. The full cell reaches a maximum volumetric charge of 90 mA.h.cm-3 at 400 °C, 17.8 uA.cm-2, and a cut-off voltage of 1.8 V. This proof of concept underscores the viability of combining over- and under-stoichiometric MIEC materials in OIBs and provides critical insights into optimizing electrode materials and tuning oxygen content for improved performance. This research lays the groundwork for future advancements in OIB technology, aiming to develop materials with lower resistance and higher efficiency.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Bulk and surface characterization of In$_2$O$_3$(001) single crystals
Authors:
Daniel R. Hagleitner,
Peter Jacobson,
Sara Blomberg,
Karina Schulte,
Edvin Lundgren,
Markus Kubicek,
Jürgen Fleig,
Frank Kubel,
Christoph Puls,
Andreas Limbeck,
Herbert Hutter,
Lynn A. Boatner,
Michael Schmid,
Ulrike Diebold
Abstract:
A comprehensive bulk and surface investigation of high-quality In$_2$O$_3$(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. Inductively coupled plasma mass spectrometry (ICP-MS) reveals small residues of Pb, Mg, and Pt in the crystals. Four-point-probe measurements show a resistivity of 2.0 $\pm$ 0.5 $\times$ 10$^5$ Ω cm, which…
▽ More
A comprehensive bulk and surface investigation of high-quality In$_2$O$_3$(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. Inductively coupled plasma mass spectrometry (ICP-MS) reveals small residues of Pb, Mg, and Pt in the crystals. Four-point-probe measurements show a resistivity of 2.0 $\pm$ 0.5 $\times$ 10$^5$ Ω cm, which translates into a carrier concentration of $\approx$10$^{12}$ cm$^{-3}$. The results from x-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) Å from the previously accepted value of 10.117 Å. Scanning tunneling microscopy (STM) images of a reduced (sputtered/annealed) and oxidized (exposure to atomic oxygen at 300 °C) surface show a step height of 5 Å, which indicates a preference for one type of surface termination. The surfaces stay flat without any evidence for macroscopic faceting under any of these preparation conditions. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 Å height under reducing conditions, with a surface structure corresponding to a strongly distorted indium lattice. Scanning tunneling spectroscopy (STS) reveals a pronounced surface state at the Fermi level ($E_F$). Photoelectron spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to atomic oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV is observed for the reduced surface, while the band bending of the oxidized surface is of the order of 0.1 eV or less.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Influence of defects on the critical behaviour at the \boldmath{105} K structural phase transition of SrTiO$_3$: II. The sharp component
Authors:
H. Hünnefeld,
T. Niemöller,
J. R. Schneider,
U. Rütt,
S. Rodewald,
J. Fleig,
G. Shirane
Abstract:
The depth dependence of the crystallographic parameters mosaicity, lattice parameter variation and integrated reflectivity and of the critical scattering above the 105 K structural phase transition of SrTiO$_3$ have been studied in five different single crystals by means of high resolution triple-crystal diffractometry using 100-120 keV synchrotron radiation. Depth-dependent impedance measuremen…
▽ More
The depth dependence of the crystallographic parameters mosaicity, lattice parameter variation and integrated reflectivity and of the critical scattering above the 105 K structural phase transition of SrTiO$_3$ have been studied in five different single crystals by means of high resolution triple-crystal diffractometry using 100-120 keV synchrotron radiation. Depth-dependent impedance measurements indicate that the presence of oxygen vacancies is not responsible for the two-length scale phenomenon. It is found that the sharp component occurs only in surface near regions of highly perfect single crystals and is coupled to an exponential inrease of the crystallographic quantities. The second length scale is absent at a surface where the strain fields are able to relax by a macroscopic bending of the lattice planes. The sharp component is also strongly suppressed in crystals of relatively large mosaicity. The combination of long range strain fields in highly perfect samples and the vicinity of the surface seem to be necessary conditions for the observation of the sharp component. The critical exponents for the second length scale are in satisfying agreement with scaling laws if the intensity of the critical scattering is assumed to be proportional to the square of the Lorentzian susceptibility and not, as usual in the current convention, to a Lorentzian-squared susceptibility. The critical exponents of the broad component are independent of the appearance of the sharp component.
△ Less
Submitted 26 June, 2000; v1 submitted 8 June, 2000;
originally announced June 2000.
