-
Wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan-style Josephson junctions for superconducting quantum processors
Authors:
N. Muthusubramanian,
P. Duivestein,
C. Zachariadis,
M. Finkel,
S. L. M. van der Meer,
H. M. Veen,
M. W. Beekman,
T. Stavenga,
A. Bruno,
L. DiCarlo
Abstract:
We investigate die-level and wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan Josephson junctions, using multiple substrates with and without through-silicon vias (TSVs). Dolan junctions fabricated on planar substrates have the highest yield and lowest room-temperature conductance spread, equivalent to ~100 MHz in transmon frequency. In TSV-integrated substrates, Dolan junctions suf…
▽ More
We investigate die-level and wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan Josephson junctions, using multiple substrates with and without through-silicon vias (TSVs). Dolan junctions fabricated on planar substrates have the highest yield and lowest room-temperature conductance spread, equivalent to ~100 MHz in transmon frequency. In TSV-integrated substrates, Dolan junctions suffer most in both yield and disorder, making Manhattan junctions preferable. Manhattan junctions show pronounced conductance decrease from wafer centre to edge, which we qualitatively capture using a geometric model of spatially-dependent resist shadowing during junction electrode evaporation. Analysis of actual junction overlap areas using scanning electron micrographs supports the model, and further points to a remnant spatial dependence possibly due to contact resistance.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Post-fabrication frequency trimming of coplanar-waveguide resonators in circuit QED quantum processors
Authors:
S. Vallés-Sanclemente,
S. L. M. van der Meer,
M. Finkel,
N. Muthusubramanian,
M. Beekman,
H. Ali,
J. F. Marques,
C. Zachariadis,
H. M. Veen,
T. Stavenga,
N. Haider,
L. DiCarlo
Abstract:
We present the use of grounding airbridge arrays to trim the frequency of microwave coplanar-waveguide (CPW) resonators post fabrication. This method is compatible with the fabrication steps of conventional CPW airbridges and crossovers and increases device yield by allowing compensation of design and fabrication uncertainty with $100~\mathrm{MHz}$ range and $10~\mathrm{MHz}$ resolution. We showca…
▽ More
We present the use of grounding airbridge arrays to trim the frequency of microwave coplanar-waveguide (CPW) resonators post fabrication. This method is compatible with the fabrication steps of conventional CPW airbridges and crossovers and increases device yield by allowing compensation of design and fabrication uncertainty with $100~\mathrm{MHz}$ range and $10~\mathrm{MHz}$ resolution. We showcase two applications in circuit QED. The first is elimination of frequency crowding between resonators intended to readout different transmons by frequency-division multiplexing. The second is frequency matching of readout and Purcell-filter resonator pairs. Combining this matching with transmon frequency trimming by laser annealing reliably achieves fast and high-fidelity readout across 17-transmon quantum processors.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
All-microwave leakage reduction units for quantum error correction with superconducting transmon qubits
Authors:
J. F. Marques,
H. Ali,
B. M. Varbanov,
M. Finkel,
H. M. Veen,
S. L. M. van der Meer,
S. Valles-Sanclemente,
N. Muthusubramanian,
M. Beekman,
N. Haider,
B. M. Terhal,
L. DiCarlo
Abstract:
Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with…
▽ More
Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with up to $99\% $ efficacy in $220~\mathrm{ns}$, with minimum impact on the qubit subspace. As a first application in the context of quantum error correction, we demonstrate the ability of multiple simultaneous LRUs to reduce the error detection rate and to suppress leakage buildup within $1\%$ in data and ancilla qubits over 50 cycles of a weight-2 parity measurement.
△ Less
Submitted 22 March, 2023; v1 submitted 20 February, 2023;
originally announced February 2023.
-
Free-space sub-terahertz field-polarization controlled by waveguide-mode-selection
Authors:
Marc Westig,
Holger Thierschmann,
Allard Katan,
Matvey Finkel,
Teun M. Klapwijk
Abstract:
We study experimentally the free-space electro-magnetic field emitted from a multimode rectangular waveguide equipped with a diagonal-horn antenna. Using the frequency range of 215-580 GHz, a photo-mixer is used to launch a free-space circularly-polarized electro-magnetic field, exciting multiple modes at the input of the rectangular waveguide via an input diagonal-horn antenna. A second photo-mix…
▽ More
We study experimentally the free-space electro-magnetic field emitted from a multimode rectangular waveguide equipped with a diagonal-horn antenna. Using the frequency range of 215-580 GHz, a photo-mixer is used to launch a free-space circularly-polarized electro-magnetic field, exciting multiple modes at the input of the rectangular waveguide via an input diagonal-horn antenna. A second photo-mixer is used, together with a silicon mirror Fresnel scatterer, to act as a polarization-sensitive coherent detector to characterize the emitted field. We find that the radiated field, excited by the fundamental waveguide mode, is characterized by a linear polarization. In addition, we find that the polarization of the radiated field rotates by 45 degree if selectively exciting higher-order modes in the waveguide. Despite the higher-order modes, the radiated field appears to maintain a predominant Gaussian beam character, since an unidirectional coupling to a detector was possible, whereas the unidirectionality is independent of the frequency. We discuss a possible application of this finding.
△ Less
Submitted 28 August, 2021; v1 submitted 8 February, 2020;
originally announced February 2020.
-
Analysis of a single-mode waveguide at sub-terahertz frequencies as a communication channel
Authors:
Marc Westig,
Holger Thierschmann,
Allard Katan,
Matvey Finkel,
Teun M. Klapwijk
Abstract:
We study experimentally the transmission of an electro-magnetic waveguide in the frequency range from 160 to 300 GHz. Photo-mixing is used to excite and detect the fundamental TE10 mode in a rectangular waveguide with two orders-of-magnitude lower impedance. The large impedance mismatch leads to a strong frequency dependence of the transmission, which we measure with a high-dynamic range of up to…
▽ More
We study experimentally the transmission of an electro-magnetic waveguide in the frequency range from 160 to 300 GHz. Photo-mixing is used to excite and detect the fundamental TE10 mode in a rectangular waveguide with two orders-of-magnitude lower impedance. The large impedance mismatch leads to a strong frequency dependence of the transmission, which we measure with a high-dynamic range of up to 80 dB, and with high frequency-resolution. The modified transmission function is directly related to the information rate of the waveguide, which we estimate to be about 1 bit per photon. We suggest that the results are applicable to a Josephson junction employed as a single-photon source and coupled to a superconducting waveguide to achieve a simple on-demand narrow-bandwidth free-space number-state channel.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Local electrodynamics of a disordered conductor model system measured with a microwave impedance microscope
Authors:
Holger Thierschmann,
Hale Cetinay,
Matvey Finkel,
Allard J. Katan,
Marc P. Westig,
Piet Van Mieghem,
Teun M. Klapwijk
Abstract:
We study the electrodynamic impedance of percolating conductors with a pre-defined network topology using a scanning microwave impedance microscope (sMIM) at GHz frequencies. For a given percolation number we observe strong spatial variations across a sample which correlate with the connected regions (clusters) in the network when the resistivity is low such as in Aluminum. For the more resistive…
▽ More
We study the electrodynamic impedance of percolating conductors with a pre-defined network topology using a scanning microwave impedance microscope (sMIM) at GHz frequencies. For a given percolation number we observe strong spatial variations across a sample which correlate with the connected regions (clusters) in the network when the resistivity is low such as in Aluminum. For the more resistive material NbTiN the impedance becomes dominated by the local structure of the percolating network (connectivity). The results can qualitatively be understood and reproduced with a network current spreading model based on the pseudo-inverse Laplacian of the underlying network graph.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Nonequilibrium interpretation of DC properties of NbN superconducting hot electron bolometers
Authors:
M. Shcherbatenko,
I. Tretyakov,
Yu. Lobanov,
S. N. Maslennikov,
N. Kaurova,
M. Finkel,
B. Voronov,
G. Goltsman,
T. M. Klapwijk
Abstract:
We present a physically consistent interpretation of the dc electrical properties of niobiumnitride (NbN)-based superconducting hot-electron bolometer (HEB-) mixers, using concepts of nonequilibrium superconductivity. Through this we clarify what physical information can be extracted from the resistive transition and the dc current-voltage characteristics, measured at suitably chosen temperatures,…
▽ More
We present a physically consistent interpretation of the dc electrical properties of niobiumnitride (NbN)-based superconducting hot-electron bolometer (HEB-) mixers, using concepts of nonequilibrium superconductivity. Through this we clarify what physical information can be extracted from the resistive transition and the dc current-voltage characteristics, measured at suitably chosen temperatures, and relevant for device characterization and optimization. We point out that the intrinsic spatial variation of the electronic properties of disordered superconductors, such as NbN, leads to a variation from device to device.
△ Less
Submitted 4 October, 2016; v1 submitted 20 September, 2016;
originally announced September 2016.
-
Spatial conductivity mapping of unprotected and capped black phosphorus using microwave microscopy
Authors:
Pieter J. de Visser,
Rebekah Chua,
Joshua O. Island,
Matvey Finkel,
Allard J. Katan,
Holger Thierschmann,
Herre S. J. van der Zant,
Teun M. Klapwijk
Abstract:
Thin layers of black phosphorus present an ideal combination of a 2D material with a tunable direct bandgap and high carrier mobility. However the material suffers from degradation in ambient conditions due to an oxidation reaction which involves water, oxygen and light. We have measured the spatial profile of the conductivity on flakes of black phosphorus as a function of time using scanning micr…
▽ More
Thin layers of black phosphorus present an ideal combination of a 2D material with a tunable direct bandgap and high carrier mobility. However the material suffers from degradation in ambient conditions due to an oxidation reaction which involves water, oxygen and light. We have measured the spatial profile of the conductivity on flakes of black phosphorus as a function of time using scanning microwave impedance microscopy. A microwave excitation (3 GHz) allows to image a conducting sample even when covered with a dielectric layer. We observe that on bare black phosphorus, the conductivity changes drastically over the whole surface within a day. We demonstrate that the degradation process is slowed down considerably by covering the material with a 10 nm layer of hafnium oxide. It is stable for more than a week, opening up a route towards stable black phosphorus devices in which the high dielectric constant of hafnium oxide can be exploited. Covering black phosphorus with a 15 nm boron nitride flake changes the degradation process qualitatively, it is dominated by the edges of the flake indicating a diffusive process and happens on the scale of days.
△ Less
Submitted 8 March, 2016;
originally announced March 2016.
-
The electron-phonon relaxation time in thin superconducting titanium nitride films
Authors:
A. Kardakova,
M. Finkel,
D. Morozov,
V. Kovalyuk,
P. An,
C. Dunscombe,
M. Tarkhov,
P. Mauskopf,
T. M. Klapwijk,
G. Goltsman
Abstract:
We report on the direct measurement of the electron-phonon relaxation time, τeph, in disordered TiN films. Measured values of τeph are from 5.5 ns to 88 ns in the 4.2 to 1.7 K temperature range and consistent with a T-3 temperature dependence. The electronic density of states at the Fermi level N0 is estimated from measured material parameters. The presented results confirm that thin TiN films are…
▽ More
We report on the direct measurement of the electron-phonon relaxation time, τeph, in disordered TiN films. Measured values of τeph are from 5.5 ns to 88 ns in the 4.2 to 1.7 K temperature range and consistent with a T-3 temperature dependence. The electronic density of states at the Fermi level N0 is estimated from measured material parameters. The presented results confirm that thin TiN films are promising candidate-materials for ultrasensitive superconducting detectors.
△ Less
Submitted 20 December, 2013;
originally announced December 2013.
