-
Impact of interface defects on the band alignment and performance of TiO$_2$/MAPI/Cu$_2$O perovskite solar cells
Authors:
Nicolae Filipoiu,
Marina Cuzminschi,
Calin-Andrei Pantis-Simut,
Kristinn Torfason,
Rachel Elizabeth Brophy,
Andrei Manolescu,
Roxana E. Patru,
Cristina Besleaga,
George E. Stan,
Ioana Pintilie,
George Alexandru Nemnes
Abstract:
Optimizing the interfaces in perovskite solar cells (PSCs) is essential for enhancing their performance, improving their stability, and making them commercially viable for large-scale deployment in solar energy harvesting applications. Point defects, like vacancies, have a dual role, as they can inherently provide a proper doping, but they can also reduce the collected current by trap-assisted rec…
▽ More
Optimizing the interfaces in perovskite solar cells (PSCs) is essential for enhancing their performance, improving their stability, and making them commercially viable for large-scale deployment in solar energy harvesting applications. Point defects, like vacancies, have a dual role, as they can inherently provide a proper doping, but they can also reduce the collected current by trap-assisted recombination. Moreover, they can play an active role in ion migration. Using {\it ab initio} density functional theory (DFT) calculations we investigate the changes in the band alignment induced by interfacial vacancy defects in a TiO$_2$/MAPI/Cu$_2$O based PSC. Depending on the type of the vacancy (Ti, Cu, O, Pb, I) in the oxide and perovskite materials, additional doping is superimposed on the already existing background. Their effect on the performance of the PSCs becomes visible, as shown by SCAPS simulations. The most significant impact is observed for $p$ type doping of TiO$_2$ and $n$ type doping of Cu$_2$O, while the effective doping of the perovskite layer affects one of the two interfaces. We discuss these results based on modification of the band structure near the active interfaces and provide further insights concerning the optimization of electron and hole collection.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Electron transporting bilayers for perovskite solar cells: spray coating deposition of c-TiO2/m-SnO2-quantum dots
Authors:
Anca G. Mirea,
Ioana D. Vlaicu,
Sarah Derbali,
Florentina Neatu,
Andrei G. Tomulescu,
Cristina Besleaga,
Monica Enculescu,
Andrei C. Kuncser,
Alexandra C. Iacoban,
Nicolae Filipoiu,
Marina Cuzminschi,
George A. Nemnes,
Andrei Manolescu,
Mihaela Florea,
Ioana Pintilie
Abstract:
Herein we present a comparative study among different mesoporous electron transporter layers (ETLs), namely nanometric m-TiO2, m-SnO2 and m-SnO2 quantum dots (QDs), deposited by spray coating method. The experimental data correlated with the photovoltaic parameters indicate that the SnO2 mesoporous layer obtained from the spray deposition of the in-house prepared QDs solution is the best candidate…
▽ More
Herein we present a comparative study among different mesoporous electron transporter layers (ETLs), namely nanometric m-TiO2, m-SnO2 and m-SnO2 quantum dots (QDs), deposited by spray coating method. The experimental data correlated with the photovoltaic parameters indicate that the SnO2 mesoporous layer obtained from the spray deposition of the in-house prepared QDs solution is the best candidate between the three used mesoporous ETLs. The use of the in-house prepared SnO2 QDs solution presents smaller agglomerates composed of 3 nm NPs resulting in the formation of a thinner, more uniform, and compact mesoporous ETL, compared with the other two ETL solutions. The formamidinium-methylamonium-potassium (FAMA@10K) perovskite deposited on this m-SnO2 QDs ETL presents a lower RMS, more uniformity and, a higher amount of PbI2. Interestingly, this higher concentration for PbI2 seems to enhance the performance of the perovskite solar cells (PSC), compared to the other two mesoporous ETLs. Our work reveals that SnO2 QDs solution can be easily produced in the laboratory and it is more suited for the deposition of the mesoporous ETL when choosing a FAMA@10K configuration perovskite solar cell with power conversion efficiency (PCE) higher than 10%.
△ Less
Submitted 1 July, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
OH$^-$ ions can reduce the iodide migration in MAPI
Authors:
R. E. Brophy,
M. Kateb,
I. Ghitiu,
N. Filipoiu,
K. Torfason,
H. G. Svavarsson,
G. A. Nemnes,
I. Pintilie,
A. Manolescu
Abstract:
One of the main degradation mechanisms of methylammonium lead iodine (MAPI), which is an important material for perovskite based solar cells, is the migration of iodide ions. It is believed that this phenomenon is in fact dominated by the diffusion of iodide vacancies. In this paper, we suggest that the addition of a small amount of OH$^-$ ions can help suppress the migration of iodide and increas…
▽ More
One of the main degradation mechanisms of methylammonium lead iodine (MAPI), which is an important material for perovskite based solar cells, is the migration of iodide ions. It is believed that this phenomenon is in fact dominated by the diffusion of iodide vacancies. In this paper, we suggest that the addition of a small amount of OH$^-$ ions can help suppress the migration of iodide and increase the overall stability of the material. Through the use of molecular dynamics simulations, we show that the OH$^-$ ions can bind to the positively charged iodide vacancies and can block the access of the negative iodide ions into those vacancies.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Optoelectronic and stability properties of quasi-2D alkylammonium based perovskites
Authors:
N. Filipoiu,
Anca G. Mirea,
Sarah Derbali,
C. -A. Pantis-Simut,
D. -V. Anghel,
A. Manolescu,
Ioana Pintilie,
Mihaela Florea,
G. A. Nemnes
Abstract:
Electronic and stability properties of quasi-2D alkylammonium perovskites are investigated using density functional theory (DFT) calculations and validated experimentally on selected classes of compounds. Our analysis is focused on perovskite structures of formula (A)$_2$(A$'$)$_{n-1}$Pb$_n$X$_{3n+1}$, with large cations A = butyl-, pentyl-, hexylammonium (BA, PA, HXA), small cations A$'$ = methyl…
▽ More
Electronic and stability properties of quasi-2D alkylammonium perovskites are investigated using density functional theory (DFT) calculations and validated experimentally on selected classes of compounds. Our analysis is focused on perovskite structures of formula (A)$_2$(A$'$)$_{n-1}$Pb$_n$X$_{3n+1}$, with large cations A = butyl-, pentyl-, hexylammonium (BA, PA, HXA), small cations A$'$ = methylammonium, formamidinium, ethylammonium, guanidinium (MA,FA,EA,GA) and halogens X = I, Br, Cl. The role of the halogen ions is outlined for the band structure, stability and defect formation energies. Two opposing trends are found for the absorption efficiency versus stability, the latter being assessed with respect to possible degradation mechanisms. Experimental validation is performed on quasi-2D perovskites based on pentylammonium cations, namely: (PA)$_2$PbX$_4$ and (PA)$_2$(MA)Pb$_2$X$_7$, synthesized by antisolvent-assisted vapor crystallization. Structural and optical analysis are inline with the DFT based calculations. In addition, the thermogravimetric analysis shows an enhanced stability of bromide and chloride based compounds, in agreement with the theoretical predictions.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Capacitive and inductive effects in perovskite solar cells: the different roles of ionic current and ionic charge accumulation
Authors:
Nicolae Filipoiu,
Amanda Teodora Preda,
Dragos Victor Anghel,
Roxana Patru,
Rachel Elizabeth Brophy,
Movaffaq Kateb,
Cristina Besleaga,
Andrei Gabriel Tomulescu,
Ioana Pintilie,
Andrei Manolescu,
George Alexandru Nemnes
Abstract:
Dynamic hysteresis effects have been long known to occur in the J-V characteristics of perovskite solar cells (PSCs), with the ionic migration being identified as the primary factor. The hysteretic effects impacted early studies by the uncertainty in the evaluation of the power conversion efficiency, while currently, potential links to degradation mechanisms are in the focus. Therefore, understand…
▽ More
Dynamic hysteresis effects have been long known to occur in the J-V characteristics of perovskite solar cells (PSCs), with the ionic migration being identified as the primary factor. The hysteretic effects impacted early studies by the uncertainty in the evaluation of the power conversion efficiency, while currently, potential links to degradation mechanisms are in the focus. Therefore, understanding ion migration is a central goal, typically addressed by performing a combined large- and small signal analysis. The reported large capacitive and inductive effects created controversies with respect to the underlying mechanisms, yielding essentially two classes of models, one based on large accumulation capacitances and the other based on ionic modulation of the collected current. We introduce here an equivalent circuit model and interpret these phenomena in terms of recombination current modulation, identifying the distinct contributions from ion current and ionic charge accumulations. These contributions to the recombination current are associated with capacitive and inductive effects, respectively, and we corroborate the numerical simulations with electrochemical impedance spectroscopy (EIS) measurements. These show the role of the recombination currents of photogenerated carriers in producing both capacitive and inductive effects as the illumination is varied. Moreover, we provide a bridging point between the two classes of models and suggest a framework of investigation of defect states based on the observed inductive behavior, which would further aid the mitigation of the degradation effects.
△ Less
Submitted 30 November, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
