Showing 1–17 of 17 results for author: Fernandez-Pacheco, A

Fractional Skyrmion Tubes in Chiral-Interfaced Three-Dimensional Magnetic Nanowires

Authors: John Fullerton, Naëmi Leo, Jakub Jurczyk, Claire Donnelly, Dédalo Sanz-Hernández, Luka Skoric, Nicolas Mille, Stefan Stanescu, Donald A. MacLaren, Rachid Belkhou, Aurelio Hierro-Rodriguez, Amalio Fernández-Pacheco

Abstract: Magnetic skyrmions are chiral spin textures with rich physics and great potential for unconventional computing. Typically, skyrmions form in bulk crystals with reduced symmetry or ultrathin film multilayers involving heavy metals. Here, we demonstrate the formation of fractional Bloch skyrmion tubes at room temperature by 3D printing ferromagnetic double-helix nanowires with two regions of opposit… ▽ More Magnetic skyrmions are chiral spin textures with rich physics and great potential for unconventional computing. Typically, skyrmions form in bulk crystals with reduced symmetry or ultrathin film multilayers involving heavy metals. Here, we demonstrate the formation of fractional Bloch skyrmion tubes at room temperature by 3D printing ferromagnetic double-helix nanowires with two regions of opposite chirality. Using X-ray microscopy and micromagnetic simulations, we show that the coexistence of vortex and anti-parallel spin states induces the formation of fractional skyrmion tubes at zero magnetic fields, minimising the energy cost of breaking the coupling between geometric and magnetic chirality. We also demonstrate control over zero-field states, including pure vortex, or mixed skyrmion-vortex states, highlighting the magnetic reconfigurability of these 3D nanowires. This work shows how interfacing chiral geometries at the nanoscale can enable advanced forms of topological spintronics. △ Less

Submitted 18 December, 2024; originally announced December 2024.

Vortex motion in reconfigurable three-dimensional superconducting nanoarchitectures

Authors: Elina Zhakina, Luke Turnbull, Weijie Xu, Markus König, Paul Simon, Wilder Carrillo-Cabrera, Amalio Fernandez-Pacheco, Uri Vool, Dieter Suess, Claas Abert, Vladimir M. Fomin, Claire Donnelly

Abstract: When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in techn… ▽ More When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in technologies. Here, we harness three-dimensional (3D) nanopatterning to fabricate and control the emergent properties of a 3D superconducting nanostructure. Not only are we able to demonstrate the existence and motion of superconducting vortices in 3D but, with simulations, we show that the confinement leads to a well-defined bending of the vortices within the volume of the structure. Moreover, we experimentally observe a strong geometrical anisotropy of the critical field, through which we achieve the reconfigurable coexistence of superconducting and normal states in our 3D superconducting architecture, and the local definition of weak links. In this way, we uncover an intermediate regime of nanosuperconductivity, where the vortex state is truly three-dimensional and can be designed and manipulated by geometrical confinement. This insight into the influence of 3D geometries on superconducting properties offers a route to local reconfigurable control for future computing devices, sensors, and quantum technologies. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 22 pages, 12 figures

Preservation of scalar spin chirality across a metallic spacer in synthetic antiferromagnets with chiral interlayer interactions

Authors: Miguel A. Cascales Sandoval, A. Hierro-Rodríguez, S. Ruiz-Gómez, L. Skoric, M. A. Niño, S. McVitie, S. Flewett, M. Foerster, Elena Y. Vedmedenko, N. Jaouen, A. Fernández-Pacheco

Abstract: Chiral magnetic textures are key for the development of modern spintronic devices. In multilayered thin films, these are typically stabilized via the interfacial intralayer Dzyaloshinskii-Moriya interaction (DMI). Additionally, it has been recently observed that DMI may also promote vector spin chirality along the third dimension, coupling spins in different magnetic layers via non-magnetic spacer… ▽ More Chiral magnetic textures are key for the development of modern spintronic devices. In multilayered thin films, these are typically stabilized via the interfacial intralayer Dzyaloshinskii-Moriya interaction (DMI). Additionally, it has been recently observed that DMI may also promote vector spin chirality along the third dimension, coupling spins in different magnetic layers via non-magnetic spacer layers, an effect referred to as interlayer DMI (IL-DMI). This interaction holds promise for 3D nanomagnetism, from the creation of 3D spin structures such as hopfions to new forms of magnetic functionality in the vertical direction via remote control of chiral spin states. Here, we investigate via magnetic X-ray scattering and imaging techniques the chiral nature of orthogonal magnetic states that form in a synthetic antiferromagnet with IL-DMI. We find that the vector spin chirality of the textures formed in an in-plane layer is determined by the net out-of-plane spin configuration of a neighboring layer, leading as a result to complex spin states across a metallic interface where the overall scalar spin chirality is preserved. This work thus uncovers a new flavor of chiral interlayer interactions, demonstrating new ways to control magnetic chirality in three dimensions. △ Less

Submitted 10 May, 2024; v1 submitted 11 April, 2024; originally announced April 2024.

Tailoring the energy landscape of a Bloch point singularity with curvature

Authors: Sandra Ruiz-Gomez, Claas Abert, Pamela Morales-Fernández, Claudia Fernandez-Gonzalez, Sabri Koraltan, Lukas Danesi, Dieter Suess, Michael Foerster, Miguel Ángel Nino, Anna Mandziak, Dorota Wilgocka-Ślęzak, Pawel Nita, Markus Koenig, Sebastian Seifert, Aurelio Hierro Rodríguez, Amalio Fernández-Pacheco, Claire Donnelly

Abstract: Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored… ▽ More Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored. Here we harness advanced three-dimensional nanofabrication to explore the influence of chirality on Bloch point singularities by introducing curvature-induced symmetry breaking in a ferromagnetic nanowire. Combining X-ray magnetic microscopy with the application of in situ magnetic fields, we demonstrate that Bloch point singularity-containing domain walls are stabilised in straight regions of the sample, and determine that curvature can be used to tune the energy landscape of the Bloch points. Not only are we able to pattern pinning points but, by controlling the gradient of curvature, we define asymmetric potential wells to realise a robust Bloch point shift-register with non-reciprocal behaviour. These insights into the influence of symmetry and chirality on singularities offers a route to the controlled nucleation and propagation of topological textures, providing opportunities for logic and computing devices. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Determination of optimal experimental conditions for accurate 3D reconstruction of the magnetization vector via XMCD-PEEM

Authors: Miguel A. Cascales Sandoval, A. Hierro-Rodríguez, S. Ruiz-Gómez, L. Skoric, C. Donnelly, M. A. Niño, D. McGrouther, S. McVitie, S. Flewett, N. Jaouen, R. Belkhou, M. Foerster, A. Fernández-Pacheco

Abstract: In this work we present a detailed analysis on the performance of X-ray magnetic circular dichroism photo-emission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of the magnetization. For this, we choose 360$^{\circ}$ domain wall ring structures which form in a synthetic antiferromagnet as our model to conduct the quantitative analysis. We assess how the quality of the results… ▽ More In this work we present a detailed analysis on the performance of X-ray magnetic circular dichroism photo-emission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of the magnetization. For this, we choose 360$^{\circ}$ domain wall ring structures which form in a synthetic antiferromagnet as our model to conduct the quantitative analysis. We assess how the quality of the results is affected depending on the number of projections that are involved in the reconstruction process, as well as their angular distribution. For this we develop a self-consistent error metric, which indicates that the main factor of improvement comes from selecting the projections evenly spread out in space, over having a larger number of these spanning a smaller angular range. This work thus poses XMCD-PEEM as a powerful tool for vector imaging of complex 3D magnetic structures. △ Less

Submitted 25 April, 2024; v1 submitted 16 May, 2023; originally announced May 2023.

Observation and formation mechanism of 360° domain wall rings in Synthetic Anti-Ferromagnets with interlayer chiral interactions

Authors: Miguel A. Cascales Sandoval, A Hierro-Rodríguez, S. Ruiz-Gómez, L. Skoric, C. Donnelly, M. A. Niño, Elena Y. Vedmedenko, D. McGrouther, S. McVitie, S. Flewett, N. Jaouen, M. Foerster, A. Fernández-Pacheco

Abstract: The Interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) chirally couples spins in different ferromagnetic layers of multilayer heterostructures. So far, samples with IL-DMI have been investigated utilizing magnetometry and magnetotransport techniques, where the interaction manifests as a tunable chiral exchange bias field. Here, we investigate the nanoscale configuration of the magnetization vec… ▽ More The Interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) chirally couples spins in different ferromagnetic layers of multilayer heterostructures. So far, samples with IL-DMI have been investigated utilizing magnetometry and magnetotransport techniques, where the interaction manifests as a tunable chiral exchange bias field. Here, we investigate the nanoscale configuration of the magnetization vector in a synthetic anti-ferromagnet (SAF) with IL-DMI, after applying demagnetizing field sequences. We add different global magnetic field offsets to the demagnetizing sequence in order to investigate the states that form when the IL-DMI exchange bias field is fully or partially compensated. For magnetic imaging and vector reconstruction of the remanent magnetic states we utilize X-ray magnetic circular dichroism photoemission electron microscopy, evidencing the formation of 360$^{\circ}$ domain wall rings of typically 0.5-3.0 $μm$ in diameter. These spin textures are only observed when the exchange bias field due to the IL-DMI is not perfectly compensated by the magnetic field offset. From a combination of micromagnetic simulations, magnetic charge distribution and topology arguments, we conclude that a non-zero remanent effective field with components both parallel and perpendicular to the anisotropy axis of the SAF is necessary to observe the rings. This work shows how the exchange bias field due to IL-DMI can lead to complex metastable spin states during reversal, important for the development of novel spintronic devices. △ Less

Submitted 15 May, 2023; v1 submitted 12 May, 2023; originally announced May 2023.

Controlled Evolution of Three-Dimensional Magnetic States in Strongly Coupled Cylindrical Nanowire Pairs

Authors: J Fullerton, A Hierro-Rodriguez, C Donnelly, D Sanz-Hernández, L Skoric, D A MacLaren, A Fernández-Pacheco

Abstract: Cylindrical magnetic nanowires are promising systems for the development of three-dimensional spintronic devices. Here, we simulate the evolution of magnetic states during fabrication of strongly-coupled cylindrical nanowires with varying degrees of overlap. By varying the separation between wires, the relative strength of exchange and magnetostatic coupling can be tuned. Hence leading to the form… ▽ More Cylindrical magnetic nanowires are promising systems for the development of three-dimensional spintronic devices. Here, we simulate the evolution of magnetic states during fabrication of strongly-coupled cylindrical nanowires with varying degrees of overlap. By varying the separation between wires, the relative strength of exchange and magnetostatic coupling can be tuned. Hence leading to the formation of six fundamental states as a function of both inter-wire separation and wire height. In particular, two complex three-dimensional magnetic states, a 3D Landau Pattern and a Helical Domain wall, are observed to emerge for intermediate overlap. The competition of magnetic interactions and the parallel growth scheme we follow (growing both wires at the same time) favours the formation of these anti-parallel metastable states. This works shows how the engineering of strongly coupled 3D nanostructures with competing interactions can be used to create complex spin textures. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Domain wall automotion in three-dimensional magnetic helical interconnectors

Authors: L. Skoric, C. Donnelly, A. Hierro-Rodriguez, S. Ruiz-Gómez, M. Foerster, M. A. Niño Orti, R. Belkhou, C. Abert, D. Suess, A. Fernández-Pacheco

Abstract: The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nano… ▽ More The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work provides new possibilities for efficient transfer of magnetic information in three dimensions. △ Less

Submitted 9 October, 2021; originally announced October 2021.

Micromagnetic modelling of magnetic domain walls in curved cylindrical nanotubes and nanowires

Authors: L. Skoric, C. Donnelly, C. Abert, A. Hierro-Rodriguez, D. Suess, A. Fernández-Pacheco

Abstract: We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of… ▽ More We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of curvature shifts the range for which the TW is the ground state domain wall to higher diameters, and increases the range of metastability. We interpret this behavior to be primarily due to the curvature-induced effective Dzyaloshinskii-Moriya term in the exchange energy. Furthermore, we demonstrate qualitatively the same behavior in solid cylindrical nanowires. Comparing both tubes and wires, we observe how while in tubes curvature tends to suppress the transformation from the TW to VW, in wires it promotes the transformation of the VW containing the Bloch point into the TW. These findings have important implications in the fundamental understanding of domain walls in 3D geometries, and the design of future domain wall devices. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Non-planar geometrical effects on the magnetoelectrical signal in a three-dimensional nanomagnetic circuit

Authors: Fanfan Meng, Claire Donnelly, Claas Abert, Luka Skoric, Stuart Holmes, Zhuocong Xiao, Jung-Wei Liao, Peter J. Newton, Crispin H. W. Barnes, Dédalo Sanz-Hernández, Aurelio Hierro-Rodriguez, Dieter Suess, Russell P. Cowburn, Amalio Fernández-Pacheco

Abstract: Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a micr… ▽ More Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a microelectronic circuit using direct-write nanofabrication. Due to the 3D vectorial nature of both electrical current and magnetisation, a complex superposition of several magnetoelectrical effects takes place. By performing electrical measurements under the application of 3D magnetic fields, in combination with macrospin simulations and finite element modelling, we disentangle the superimposed effects, finding how a 3D geometry leads to unusual angular dependences of well-known magnetotransport effects such as the anomalous Hall effect. Crucially, our analysis also reveals a strong role of the noncollinear demagnetising fields intrinsic to 3D nanostructures, which results in an angular dependent magnon magnetoresistance contributing strongly to the total magnetoelectrical signal. These findings are key to the understanding of 3D spintronic systems and underpin further fundamental and device-based studies. △ Less

Submitted 18 November, 2020; originally announced November 2020.

Artificial double-helix for geometrical control of magnetic chirality

Authors: Dédalo Sanz-Hernández, Aurelio Hierro-Rodriguez, Claire Donnelly, Javier Pablo-Navarro, Andrea Sorrentino, Eva Pereiro, César Magén, Stephen McVitie, José María de Teresa, Salvador Ferrer, Peter Fischer, Amalio Fernández-Pacheco

Abstract: Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currentl… ▽ More Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nano-patterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality. △ Less

Submitted 20 January, 2020; originally announced January 2020.

Comments: 8 pages, 3 figures

Layer-by-layer growth of complex-shaped three-dimensional nanostructures with focused electron beams

Authors: L. Skoric, D. Sanz-Hernández, F. Meng, C. Donnelly, S. Merino-Aceituno, A. Fernández-Pacheco

Abstract: The fabrication of three-dimensional (3D) nanostructures is of great interest to many areas of nanotechnology currently challenged by fundamental limitations of conventional lithography. One of the most promising direct-write methods for 3D nanofabrication is focused electron beam-induced deposition (FEBID), owing to its high spatial resolution and versatility. Here we extend FEBID to the growth o… ▽ More The fabrication of three-dimensional (3D) nanostructures is of great interest to many areas of nanotechnology currently challenged by fundamental limitations of conventional lithography. One of the most promising direct-write methods for 3D nanofabrication is focused electron beam-induced deposition (FEBID), owing to its high spatial resolution and versatility. Here we extend FEBID to the growth of complex-shaped 3D nanostructures by combining the layer-by-layer approach of conventional macroscopic 3D printers and the proximity effect correction of electron beam lithography. This framework is based on the continuum FEBID model and is capable of adjusting for a wide range of effects present during deposition, including beam-induced heating, defocussing and gas flux anisotropies. We demonstrate the capabilities of our platform by fabricating free-standing nanowires, surfaces with varying curvatures and topologies, and general 3D objects, directly from standard stereolithography (STL) files and using different precursors. Real 3D nanoprinting as demonstrated here opens up exciting avenues for the study and exploitation of 3D nanoscale phenomena. △ Less

Submitted 28 August, 2019; originally announced August 2019.

Comments: 15 pages, 4 figures

Symmetry-Breaking Interlayer Dzyaloshinskii-Moriya Interactions in Synthetic Antiferromagnets

Authors: Amalio Fernández-Pacheco, Elena Vedmedenko, Fanny Ummelen, Rhodri Mansell, Dorothée Petit, Russell P. Cowburn

Abstract: The magnetic interfacial Dzyaloshinskii-Moriya interaction (DMI) in multi-layered thin films can lead to exotic chiral spin states, of paramount importance for future spintronic technologies. Interfacial DMI is normally manifested as an intralayer interaction, mediated via a paramagnetic heavy metal in systems lacking inversion symmetry. Here we show how, by designing synthetic antiferromagnets wi… ▽ More The magnetic interfacial Dzyaloshinskii-Moriya interaction (DMI) in multi-layered thin films can lead to exotic chiral spin states, of paramount importance for future spintronic technologies. Interfacial DMI is normally manifested as an intralayer interaction, mediated via a paramagnetic heavy metal in systems lacking inversion symmetry. Here we show how, by designing synthetic antiferromagnets with canted magnetization states, it is also possible to observe interfacial interlayer-DMI at room temperature. The interlayer-DMI breaks the symmetry of the magnetic reversal process via the emergence of noncollinear spin states, which results in chiral exchange-biased hysteresis loops. This work opens up yet unexplored avenues for the development of new chiral spin textures in multi-layered thin film systems. △ Less

Submitted 29 October, 2018; v1 submitted 3 October, 2018; originally announced October 2018.

Comments: 15 pages, 4 figures

Fabrication, detection and operation of a three-dimensional nanomagnetic conduit

Authors: Dédalo Sanz-Hernández, Ruben F. Hamans, Jung-Wei Liao, Alexander Welbourne, Reinoud Lavrijsen, Amalio Fernández-Pacheco

Abstract: Three-dimensional (3D) nanomagnetic devices such as the vertical racetrack memory have attracted a huge interest due to their potential for memory and logic applications. However, their implementation has not been realised due to great challenges regarding fabrication and characterisation of 3D nanostructures. Here, we show a 3D nanomagnetic system created by 3D nano-printing and physical vapour d… ▽ More Three-dimensional (3D) nanomagnetic devices such as the vertical racetrack memory have attracted a huge interest due to their potential for memory and logic applications. However, their implementation has not been realised due to great challenges regarding fabrication and characterisation of 3D nanostructures. Here, we show a 3D nanomagnetic system created by 3D nano-printing and physical vapour deposition, which acts a conduit for domain walls. Domains formed at the substrate level are injected into a 3D nanowire, where they are controllably trapped using vectorial magnetic fields. A dark-field magneto-optical method for parallel, independent measurement of different regions in individual 3D nanostructures is also demonstrated. This work opens a new route for the advanced study and exploitation of 3D nanomagnetic systems. △ Less

Submitted 12 June, 2017; originally announced June 2017.

Comments: 21 pages, 4 figures

Journal ref: ACS Nano 2017

Direct observation of melting in a 2-D superconducting vortex lattice

Authors: I. Guillamon, H. Suderow, A. Fernandez-Pacheco, J. Sese, R. Cordoba, J. M. De Teresa, M. R. Ibarra, S. Vieira

Abstract: Topological defects such as dislocations and disclinations are predicted to determine the twodimensional (2-D) melting transition. In 2-D superconducting vortex lattices, macroscopic measurements evidence melting close to the transition to the normal state. However, the direct observation at the scale of individual vortices of the melting sequence has never been performed. Here we provide step b… ▽ More Topological defects such as dislocations and disclinations are predicted to determine the twodimensional (2-D) melting transition. In 2-D superconducting vortex lattices, macroscopic measurements evidence melting close to the transition to the normal state. However, the direct observation at the scale of individual vortices of the melting sequence has never been performed. Here we provide step by step imaging through scanning tunneling spectroscopy of a 2-D system of vortices up to the melting transition in a focused-ion-beam nanodeposited W-based superconducting thin film. We show directly the transition into an isotropic liquid below the superconducting critical temperature. Before that, we find a hexatic phase, characterized by the appearance of free dislocations, and a smectic-like phase, possibly originated through partial disclination unbinding. These results represent a significant step in the understanding of melting of 2-D systems, with impact across several research fields, such as liquid crystal molecules, or lipids in membranes. △ Less

Submitted 14 August, 2009; originally announced August 2009.

Comments: Submitted to Nature Physics

Superconducting density of states at the border of an amorphous thin film grown by focused-ion-beam

Authors: I. Guillamon, H. Suderow, S. Vieira, A. Fernandez-Pacheco, J. Sese, R. Cordoba, J. M. De Teresa, M. R. Ibarra

Abstract: We present very low temperature Scanning Tunneling Microscopy and Spectroscopy (STM/S) measurements of a W based amorphous thin film grown with focused-ion-beam. In particular, we address the superconducting properties close to the border, where the thickness of the superconducting film decreases, and the Au substrate emerges. When approaching the Au substrate, the superconducting tunneling cond… ▽ More We present very low temperature Scanning Tunneling Microscopy and Spectroscopy (STM/S) measurements of a W based amorphous thin film grown with focused-ion-beam. In particular, we address the superconducting properties close to the border, where the thickness of the superconducting film decreases, and the Au substrate emerges. When approaching the Au substrate, the superconducting tunneling conductance strongly increases around the Fermi level, and the quasiparticle peaks do not significantly change its position. Under magnetic fields, the vortex lattice is observed, with vortices positioned very close to the Au substrate. △ Less

Submitted 24 February, 2009; originally announced February 2009.

Comments: To appear in Journal of Physics: Conference series

Nanoscale superconducting properties of amorphous W-based deposits grown with focused-ion-beam

Authors: I. Guillamon, H. Suderow, S. Vieira, A. Fernandez-Pacheco, J. Sese, R. Cordoba, J. M. De Teresa, M. R. Ibarra

Abstract: We present very low temperature Scanning Tunneling Microscopy and Spectroscopy (STM/S) measurements in W-based amorphous superconducting nanodeposits grown using a metal-organic precursor and focused-ion-beam. The superconducting gap closely follows s-wave BCS theory, and STS images under magnetic fields show a hexagonal vortex lattice whose orientation is related to features observed in the top… ▽ More We present very low temperature Scanning Tunneling Microscopy and Spectroscopy (STM/S) measurements in W-based amorphous superconducting nanodeposits grown using a metal-organic precursor and focused-ion-beam. The superconducting gap closely follows s-wave BCS theory, and STS images under magnetic fields show a hexagonal vortex lattice whose orientation is related to features observed in the topography through STM. Our results demonstrate that the superconducting properties at the surface of these deposits are very homogeneous, down to atomic scale. This, combined with the huge nanofabrication possibilities of the focused-ion-beam technique, paves the way to use focused-ion-beam to make superconducting circuitry of many different geometries. △ Less

Submitted 30 May, 2008; originally announced May 2008.