Showing 1–3 of 3 results for author: Fedchak, J

$Λ$-enhanced gray molasses in a tetrahedral laser beam geometry

Authors: D. S. Barker, E. B. Norrgard, N. N. Klimov, J. A. Fedchak, J. Scherschligt, S. Eckel

Abstract: We report observation of sub-Doppler cooling of lithium using an irregular-tetrahedral laser beam arrangement, which is produced by a nanofabricated diffraction grating. We are able to capture 11(2) % of the lithium atoms from a grating magneto-optical trap into $Λ$-enhanced $D_1$ gray molasses. The molasses cools the captured atoms to a radial temperature of 60(9) $μ$K and an axial temperature of… ▽ More We report observation of sub-Doppler cooling of lithium using an irregular-tetrahedral laser beam arrangement, which is produced by a nanofabricated diffraction grating. We are able to capture 11(2) % of the lithium atoms from a grating magneto-optical trap into $Λ$-enhanced $D_1$ gray molasses. The molasses cools the captured atoms to a radial temperature of 60(9) $μ$K and an axial temperature of 23(3) $μ$K. In contrast to results from conventional counterpropagating beam configurations, we do not observe cooling when our optical fields are detuned from Raman resonance. An optical Bloch equation simulation of the cooling dynamics agrees with our data. Our results show that grating magneto-optical traps can serve as a robust source of cold atoms for tweezer-array and atom-chip experiments, even when the atomic species is not amenable to sub-Doppler cooling in bright optical molasses. △ Less

Submitted 6 October, 2021; originally announced October 2021.

Comments: 12 pages, 5 figures

A Bitter-type electromagnet for complex atomic trapping and manipulation

Authors: J. L. Siegel, D. S. Barker, J. Fedchak, J. Scherschligt, S. Eckel

Abstract: We create a pair of symmetric Bitter-type electromagnet assemblies capable of producing multiple field configurations including uniform magnetic fields, spherical quadruple traps, or Ioffe-Pritchard magnetic bottles. Unlike other designs, our coil allows both radial and azimuthal cooling water flows by incorporating an innovative 3D-printed water distribution manifold. Combined with a double-coil… ▽ More We create a pair of symmetric Bitter-type electromagnet assemblies capable of producing multiple field configurations including uniform magnetic fields, spherical quadruple traps, or Ioffe-Pritchard magnetic bottles. Unlike other designs, our coil allows both radial and azimuthal cooling water flows by incorporating an innovative 3D-printed water distribution manifold. Combined with a double-coil geometry, such orthogonal flows permit stacking of non-concentric Bitter coils. We achieve a low thermal resistance of 4.2(1) K/kW and high water flow rate of 10.0(3) L/min at a pressure of 190(10) kPa. △ Less

Submitted 11 February, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: 4 pages, 3 figures

A radiofrequency voltage-controlled current source for quantum spin manipulation

Authors: D. S. Barker, A. Restelli, J. A. Fedchak, J. Scherschligt, S. Eckel

Abstract: We present a design for a wide-bandwidth, voltage-controlled current source that is easily integrated with radiofrequency magnetic field coils. Our design uses current feedback to compensate for the frequency-dependent impedance of a radiofrequency antenna. We are able to deliver peak currents greater than 100 mA over a 300 kHz to 54 MHz frequency span. The radiofrequency current source fits onto… ▽ More We present a design for a wide-bandwidth, voltage-controlled current source that is easily integrated with radiofrequency magnetic field coils. Our design uses current feedback to compensate for the frequency-dependent impedance of a radiofrequency antenna. We are able to deliver peak currents greater than 100 mA over a 300 kHz to 54 MHz frequency span. The radiofrequency current source fits onto a printed circuit board smaller than $4~\text{cm}^2$ and consumes less than 1.3 W of power. It is suitable for use in deployable quantum sensors and nuclear-magnetic-resonance systems. △ Less

Submitted 15 October, 2020; v1 submitted 22 April, 2020; originally announced April 2020.

Comments: 8 pages, 3 figures, accepted version

Journal ref: Review of Scientific Instruments 91, 104708 (2020)