-
Deformation mechanisms in PBT at elevated temperatures
Authors:
Laurent Farge,
François Tournilhac,
Javier Perez,
Sandrine Hoppe,
Isabelle Bihannic,
Jérémy Bianchin,
Julien Boisse,
Stéphane André
Abstract:
The plastic deformation of Polybutylene terephthalate (PBT) is investigated at three temperatures (120$^\circ$C, 150$^\circ$C, 180$^\circ$C) representative of the span between glass transition, $T_g \approx 55^\circ$C and melting $T_m \approx 225^\circ$C temperatures. The mechanisms of tensile deformation are analyzed as a function of the true strain using a combination of temperature-controlled t…
▽ More
The plastic deformation of Polybutylene terephthalate (PBT) is investigated at three temperatures (120$^\circ$C, 150$^\circ$C, 180$^\circ$C) representative of the span between glass transition, $T_g \approx 55^\circ$C and melting $T_m \approx 225^\circ$C temperatures. The mechanisms of tensile deformation are analyzed as a function of the true strain using a combination of temperature-controlled tensile experiments coupled with 2D digital image correlation and synchrotron sourced wide angle (WAXS) and small angle (SAXS) X-ray scattering the amorphous and crystalline regions causing the transition between polymorphs, respectively from the isotropic amorphous phase to a smectic phase and from the $α$ crystalline phase to the $β$ phase.
△ Less
Submitted 13 February, 2023;
originally announced March 2023.
-
Certifying the intrinsic character of a constitutive law for semi-crystalline polymers: a probation test
Authors:
Stéphane André,
Simon Becker,
Camille Noûs,
Laurent Farge,
Alain Delconte
Abstract:
A study of methodological nature demonstrates the efficiency of a probation test allowing for the intrinsic character of a rheological constitutive law to be assessed. Such a law is considered here for Semi-Crystalline Polymers exhibiting necking and for large deformation. In the framework of a $(\dotσ, σ, \dot\varepsilon, \varepsilon)$ behavior's law, tensile experiments conducted at an imposed c…
▽ More
A study of methodological nature demonstrates the efficiency of a probation test allowing for the intrinsic character of a rheological constitutive law to be assessed. Such a law is considered here for Semi-Crystalline Polymers exhibiting necking and for large deformation. In the framework of a $(\dotσ, σ, \dot\varepsilon, \varepsilon)$ behavior's law, tensile experiments conducted at an imposed constant strain rate $\dot\varepsilon_0$ bring true stress responses from which constitutive (material) parameters can be identified from Model-Based Metrology concepts. The same experiment repeated at various strain rates gives then access to the dependence of the non-elastic parameters on the strain rate. Then the intrinsic law is tested severely by considering a new set of experiments carried out for constant displacement rates of the grips. In that case, the specimens show local strain rates which evolve strongly during the test (by a factor of 5-10 here). The parameter identification process requires then the introduction of the exact realized input strain and strain-rate command into the model. Accounting for strain rate dependency requires additionally the knowledge of the preliminary identified strain rate dependence of the non-elastic constitutive parameters for good predictions of the experimental response directly. This is what is proven here. The conclusion speaks in favor of a possible upgrade of international standards for the mechanical characterization of polymers based on constant strain-rate tensile tests and properly applied model-based metrology.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Use of Digital Image Correlation to study the effect of temperature on the development of plastic instabilities in a semi-crystalline polymer
Authors:
Laurent Farge,
Stéphane André,
Julien Boisse
Abstract:
The plastic deformation processes that occur in a tensily deformed High Density Polyethylene specimen were studied from full-field strain and strain rate measurements obtained by 3D DIC (Digital Image Correlation).The tensile tests were performed every 10{\textdegree}C from room temperature to 120{\textdegree}C . For temperatures below 60{\textdegree}C , it is shown that the strain localization…
▽ More
The plastic deformation processes that occur in a tensily deformed High Density Polyethylene specimen were studied from full-field strain and strain rate measurements obtained by 3D DIC (Digital Image Correlation).The tensile tests were performed every 10{\textdegree}C from room temperature to 120{\textdegree}C . For temperatures below 60{\textdegree}C , it is shown that the strain localization effect becomes less pronounced when the temperature increases. For temperatures higher than 60{\textdegree}C , the material is found to exhibit double yielding behavior. By analyzing the DIC data in Lagrangian representation, it was possible to quantitatively highlight the strain localization effect that is specifically associated with the second yield. The second yield strain (E_{Y_2}) was measured and appeared to be independent of temperature. For temperatures smaller than 60{\textdegree}C , it was found that the threshold strain corresponding to (E_{Y_2}) also marks the onset of the deformation process phase during which the volume strain strongly increases. Based on previous studies of our research team and on literature we concluded that the critical strain (E_{Y_2}) corresponds to the onset of the lamellar morphology destruction. At high strain levels, the neck stabilization phase was shown to proceed according to a strain driven scheme characterized by threshold strains that are temperature independent. The experimental values of the threshold strain marking the onset of the stabilization phase are found to be in good agreement with those found using the Haward-Thackray model.
△ Less
Submitted 30 November, 2018;
originally announced December 2018.
-
A Mechanical Study of a Glass Fabric-Thermoplastic Resin Composite: 3D-DIC and X-ray tomographic observations explained by numerical simulations based on a spectral solver
Authors:
Zakariya Boufaida,
Julien Boisse,
Stéphane André,
Laurent Farge
Abstract:
In the study presented in this paper, we analyzed the mechanical response of a glass fiber plain weave/polymer composite at the fabric millimetric mesoscale. The detail of the stress and strain fields in a fabric repeating unit cell was numerically calculated using CraFT (Composite response and Fourier Transforms), a code specifically conceived for simulating the mechanical behaviour of materials…
▽ More
In the study presented in this paper, we analyzed the mechanical response of a glass fiber plain weave/polymer composite at the fabric millimetric mesoscale. The detail of the stress and strain fields in a fabric repeating unit cell was numerically calculated using CraFT (Composite response and Fourier Transforms), a code specifically conceived for simulating the mechanical behaviour of materials with complex microstructure. The local strain fields obtained by simulation were found to be in very good agreement with measurements carried out using 3D Digital Image Correlation (3D DIC). From numerical stress fields calculated with the CraFT solver, we also highlighted the subregions inside the periodic mesostructure where there is maximum stress. Furthermore, with X-ray tomography post mortem measurements, we were able to confirm that certain damage modes were well initiated in these microstructure subregions of stress concentration.
△ Less
Submitted 28 April, 2016;
originally announced May 2016.
