Showing 1–41 of 41 results for author: Evans, M L

34 Examples of LLM Applications in Materials Science and Chemistry: Towards Automation, Assistants, Agents, and Accelerated Scientific Discovery

Authors: Yoel Zimmermann, Adib Bazgir, Alexander Al-Feghali, Mehrad Ansari, Joshua Bocarsly, L. Catherine Brinson, Yuan Chiang, Defne Circi, Min-Hsueh Chiu, Nathan Daelman, Matthew L. Evans, Abhijeet S. Gangan, Janine George, Hassan Harb, Ghazal Khalighinejad, Sartaaj Takrim Khan, Sascha Klawohn, Magdalena Lederbauer, Soroush Mahjoubi, Bernadette Mohr, Seyed Mohamad Moosavi, Aakash Naik, Aleyna Beste Ozhan, Dieter Plessers, Aritra Roy , et al. (10 additional authors not shown)

Abstract: Large Language Models (LLMs) are reshaping many aspects of materials science and chemistry research, enabling advances in molecular property prediction, materials design, scientific automation, knowledge extraction, and more. Recent developments demonstrate that the latest class of models are able to integrate structured and unstructured data, assist in hypothesis generation, and streamline resear… ▽ More Large Language Models (LLMs) are reshaping many aspects of materials science and chemistry research, enabling advances in molecular property prediction, materials design, scientific automation, knowledge extraction, and more. Recent developments demonstrate that the latest class of models are able to integrate structured and unstructured data, assist in hypothesis generation, and streamline research workflows. To explore the frontier of LLM capabilities across the research lifecycle, we review applications of LLMs through 34 total projects developed during the second annual Large Language Model Hackathon for Applications in Materials Science and Chemistry, a global hybrid event. These projects spanned seven key research areas: (1) molecular and material property prediction, (2) molecular and material design, (3) automation and novel interfaces, (4) scientific communication and education, (5) research data management and automation, (6) hypothesis generation and evaluation, and (7) knowledge extraction and reasoning from the scientific literature. Collectively, these applications illustrate how LLMs serve as versatile predictive models, platforms for rapid prototyping of domain-specific tools, and much more. In particular, improvements in both open source and proprietary LLM performance through the addition of reasoning, additional training data, and new techniques have expanded effectiveness, particularly in low-data environments and interdisciplinary research. As LLMs continue to improve, their integration into scientific workflows presents both new opportunities and new challenges, requiring ongoing exploration, continued refinement, and further research to address reliability, interpretability, and reproducibility. △ Less

Submitted 15 May, 2025; v1 submitted 5 May, 2025; originally announced May 2025.

Comments: arXiv admin note: substantial text overlap with arXiv:2411.15221. This paper is a refinement and analysis of the raw project submissions from arXiv:2411.15221

Accelerating the discovery of high-performance nonlinear optical materials using active learning and high-throughput screening

Authors: Victor Trinquet, Matthew L. Evans, Gian-Marco Rignanese

Abstract: Due to their abundant use in all-solid-state lasers, nonlinear optical (NLO) crystals are needed for many applications across diverse fields such as medicine and communication. However, because of conflicting requirements, the design of suitable inorganic crystals with strong second-harmonic generation (SHG) has proven to be challenging to both experimentalists and computational scientists. In thi… ▽ More Due to their abundant use in all-solid-state lasers, nonlinear optical (NLO) crystals are needed for many applications across diverse fields such as medicine and communication. However, because of conflicting requirements, the design of suitable inorganic crystals with strong second-harmonic generation (SHG) has proven to be challenging to both experimentalists and computational scientists. In this work, we leverage a data-driven approach to accelerate the search for high-performance NLO materials. We construct an extensive pool of candidates using databases within the OPTIMADE federation and employ an active learning strategy to gather optimal data while iteratively improving a machine learning model. The result is a publicly accessible dataset of $\sim$2,200 computed SHG tensors using density-functional perturbation theory. We further assess the performance of machine learning models on SHG prediction and introduce a multi-fidelity correction-learning scheme to refine data accuracy. This study represents a significant step towards data-driven materials discovery in the NLO field and demonstrates how new materials can be screened in an automated fashion. △ Less

Submitted 2 April, 2025; originally announced April 2025.

Reflections from the 2024 Large Language Model (LLM) Hackathon for Applications in Materials Science and Chemistry

Authors: Yoel Zimmermann, Adib Bazgir, Zartashia Afzal, Fariha Agbere, Qianxiang Ai, Nawaf Alampara, Alexander Al-Feghali, Mehrad Ansari, Dmytro Antypov, Amro Aswad, Jiaru Bai, Viktoriia Baibakova, Devi Dutta Biswajeet, Erik Bitzek, Joshua D. Bocarsly, Anna Borisova, Andres M Bran, L. Catherine Brinson, Marcel Moran Calderon, Alessandro Canalicchio, Victor Chen, Yuan Chiang, Defne Circi, Benjamin Charmes, Vikrant Chaudhary , et al. (119 additional authors not shown)

Abstract: Here, we present the outcomes from the second Large Language Model (LLM) Hackathon for Applications in Materials Science and Chemistry, which engaged participants across global hybrid locations, resulting in 34 team submissions. The submissions spanned seven key application areas and demonstrated the diverse utility of LLMs for applications in (1) molecular and material property prediction; (2) mo… ▽ More Here, we present the outcomes from the second Large Language Model (LLM) Hackathon for Applications in Materials Science and Chemistry, which engaged participants across global hybrid locations, resulting in 34 team submissions. The submissions spanned seven key application areas and demonstrated the diverse utility of LLMs for applications in (1) molecular and material property prediction; (2) molecular and material design; (3) automation and novel interfaces; (4) scientific communication and education; (5) research data management and automation; (6) hypothesis generation and evaluation; and (7) knowledge extraction and reasoning from scientific literature. Each team submission is presented in a summary table with links to the code and as brief papers in the appendix. Beyond team results, we discuss the hackathon event and its hybrid format, which included physical hubs in Toronto, Montreal, San Francisco, Berlin, Lausanne, and Tokyo, alongside a global online hub to enable local and virtual collaboration. Overall, the event highlighted significant improvements in LLM capabilities since the previous year's hackathon, suggesting continued expansion of LLMs for applications in materials science and chemistry research. These outcomes demonstrate the dual utility of LLMs as both multipurpose models for diverse machine learning tasks and platforms for rapid prototyping custom applications in scientific research. △ Less

Submitted 2 January, 2025; v1 submitted 20 November, 2024; originally announced November 2024.

Comments: Updating author information, the submission remains largely unchanged. 98 pages total

Datatractor: Metadata, automation, and registries for extractor interoperability in the chemical and materials sciences

Authors: Matthew L. Evans, Gian-Marco Rignanese, David Elbert, Peter Kraus

Abstract: Two key issues hindering the transition towards FAIR data science are the poor discoverability and inconsistent instructions for the use of data extractor tools, i.e., how we go from raw data files created by instruments, to accessible metadata and scientific insight. If the existing format conversion tools are hard to find, install, and use, their reimplementation will lead to a duplication of ef… ▽ More Two key issues hindering the transition towards FAIR data science are the poor discoverability and inconsistent instructions for the use of data extractor tools, i.e., how we go from raw data files created by instruments, to accessible metadata and scientific insight. If the existing format conversion tools are hard to find, install, and use, their reimplementation will lead to a duplication of effort, and an increase in the associated maintenance burden is inevitable. The Datatractor framework presented in this work addresses these issues. First, by providing a curated registry of such extractor tools their discoverability will increase. Second, by describing them using a standardised but lightweight schema, their installation and use is machine-actionable. Finally, we provide a reference implementation for such data extraction. The Datatractor framework can be used to provide a public-facing data extraction service, or be incorporated into other research data management tools providing added value. △ Less

Submitted 24 April, 2025; v1 submitted 24 October, 2024; originally announced October 2024.

Comments: (accepted version)

Journal ref: MRS Bulletin (2025)

Optical materials discovery and design with federated databases and machine learning

Authors: Victor Trinquet, Matthew L. Evans, Cameron J. Hargreaves, Pierre-Paul De Breuck, Gian-Marco Rignanese

Abstract: Combinatorial and guided screening of materials space with density-functional theory and related approaches has provided a wealth of hypothetical inorganic materials, which are increasingly tabulated in open databases. The OPTIMADE API is a standardised format for representing crystal structures, their measured and computed properties, and the methods for querying and filtering them from remote re… ▽ More Combinatorial and guided screening of materials space with density-functional theory and related approaches has provided a wealth of hypothetical inorganic materials, which are increasingly tabulated in open databases. The OPTIMADE API is a standardised format for representing crystal structures, their measured and computed properties, and the methods for querying and filtering them from remote resources. Currently, the OPTIMADE federation spans over 20 data providers, rendering over 30 million structures accessible in this way, many of which are novel and have only recently been suggested by machine learning-based approaches. In this work, we outline our approach to non-exhaustively screen this dynamic trove of structures for the next-generation of optical materials. By applying MODNet, a neural network-based model for property prediction, within a combined active learning and high-throughput computation framework, we isolate particular structures and chemistries that should be most fruitful for further theoretical calculations and for experimental study as high-refractive-index materials. By making explicit use of automated calculations, federated dataset curation and machine learning, and by releasing these publicly, the workflows presented here can be periodically re-assessed as new databases implement OPTIMADE, and new hypothetical materials are suggested. △ Less

Submitted 18 May, 2024; originally announced May 2024.

Journal ref: Faraday Discussions (2024)

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange

Authors: Matthew L. Evans, Johan Bergsma, Andrius Merkys, Casper W. Andersen, Oskar B. Andersson, Daniel Beltrán, Evgeny Blokhin, Tara M. Boland, Rubén Castañeda Balderas, Kamal Choudhary, Alberto Díaz Díaz, Rodrigo Domínguez García, Hagen Eckert, Kristjan Eimre, María Elena Fuentes Montero, Adam M. Krajewski, Jens Jørgen Mortensen, José Manuel Nápoles Duarte, Jacob Pietryga, Ji Qi, Felipe de Jesús Trejo Carrillo, Antanas Vaitkus, Jusong Yu, Adam Zettel, Pedro Baptista de Castro , et al. (34 additional authors not shown)

Abstract: The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea… ▽ More The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development. △ Less

Submitted 5 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Journal ref: Digital Discovery, 2024, 3, 1509-1533

14 Examples of How LLMs Can Transform Materials Science and Chemistry: A Reflection on a Large Language Model Hackathon

Authors: Kevin Maik Jablonka, Qianxiang Ai, Alexander Al-Feghali, Shruti Badhwar, Joshua D. Bocarsly, Andres M Bran, Stefan Bringuier, L. Catherine Brinson, Kamal Choudhary, Defne Circi, Sam Cox, Wibe A. de Jong, Matthew L. Evans, Nicolas Gastellu, Jerome Genzling, María Victoria Gil, Ankur K. Gupta, Zhi Hong, Alishba Imran, Sabine Kruschwitz, Anne Labarre, Jakub Lála, Tao Liu, Steven Ma, Sauradeep Majumdar , et al. (28 additional authors not shown)

Abstract: Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of mole… ▽ More Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of molecules and materials, designing novel interfaces for tools, extracting knowledge from unstructured data, and developing new educational applications. The diverse topics and the fact that working prototypes could be generated in less than two days highlight that LLMs will profoundly impact the future of our fields. The rich collection of ideas and projects also indicates that the applications of LLMs are not limited to materials science and chemistry but offer potential benefits to a wide range of scientific disciplines. △ Less

Submitted 14 July, 2023; v1 submitted 9 June, 2023; originally announced June 2023.

Effects of orientational order on modulated cylindrical interfaces

Authors: Jason Klebes, Paul S. Clegg, R. M. L. Evans

Abstract: Cylindrical interfaces occur in sheared or deformed emulsions and as biological or technological lipid monolayer or bilayer tubules. Like the corresponding spherical droplets and vesicles, these cylinder-like surfaces may host orientaional order with $n$-fold rotational symmetry, for example in the positions of lipid molecules or of spherical nanoparticles. We examine how that order interacts with… ▽ More Cylindrical interfaces occur in sheared or deformed emulsions and as biological or technological lipid monolayer or bilayer tubules. Like the corresponding spherical droplets and vesicles, these cylinder-like surfaces may host orientaional order with $n$-fold rotational symmetry, for example in the positions of lipid molecules or of spherical nanoparticles. We examine how that order interacts with and induces shape modulations of cylindrical interfaces. While on spherical droplets $2n$ topological defects necessarily exist and can induce icosahedral droplet shapes, the cylindrical topology is compatible with a defect-free patterning. Nevertheless, once a modulation is introduced by a mechanism such as spontaneous curvature, nontrivial patterns of order, including ones with excess defects, emerge and have nonlinear effects on the shape of the tube. Examining the equilibrium energetics of the system analytically and with a lattice-based Markov chain Monte Carlo simulation, we predict low-temperature morphologies of modulated cylindrical interfaces hosting orientational order. A shape modulation induces a banded pattern of alternatingly isotropic and ordered interfacial material. Furthermore cylindrical systems can be divided into Type I, without defects, and Type II, which go through a spectrum of defect states with up to $4n$ excess defects. The character of the curvature-induced shape transition from unmodulated to modulated cylinders is continuous or discontinuous accordingly. △ Less

Submitted 21 April, 2022; v1 submitted 4 February, 2022; originally announced February 2022.

Comments: 18 pages, 10 figures; figures changed, clarifications added

Journal ref: Phys. Rev. E. 105 (2022) 064802

OPTIMADE, an API for exchanging materials data

Authors: Casper W. Andersen, Rickard Armiento, Evgeny Blokhin, Gareth J. Conduit, Shyam Dwaraknath, Matthew L. Evans, Ádám Fekete, Abhijith Gopakumar, Saulius Gražulis, Andrius Merkys, Fawzi Mohamed, Corey Oses, Giovanni Pizzi, Gian-Marco Rignanese, Markus Scheidgen, Leopold Talirz, Cormac Toher, Donald Winston, Rossella Aversa, Kamal Choudhary, Pauline Colinet, Stefano Curtarolo, Davide Di Stefano, Claudia Draxl, Suleyman Er , et al. (31 additional authors not shown)

Abstract: The Open Databases Integration for Materials Design (OPTIMADE) consortium has designed a universal application programming interface (API) to make materials databases accessible and interoperable. We outline the first stable release of the specification, v1.0, which is already supported by many leading databases and several software packages. We illustrate the advantages of the OPTIMADE API throug… ▽ More The Open Databases Integration for Materials Design (OPTIMADE) consortium has designed a universal application programming interface (API) to make materials databases accessible and interoperable. We outline the first stable release of the specification, v1.0, which is already supported by many leading databases and several software packages. We illustrate the advantages of the OPTIMADE API through worked examples on each of the public materials databases that support the full API specification. △ Less

Submitted 25 August, 2021; v1 submitted 2 March, 2021; originally announced March 2021.

Comments: 11 pages, 1 table

Journal ref: Sci Data 8, 217 (2021)

Robust model benchmarking and bias-imbalance in data-driven materials science: a case study on MODNet

Authors: Pierre-Paul De Breuck, Matthew L. Evans, Gian-Marco Rignanese

Abstract: As the number of novel data-driven approaches to material science continues to grow, it is crucial to perform consistent quality, reliability and applicability assessments of model performance. In this paper, we benchmark the Materials Optimal Descriptor Network (MODNet) method and architecture against the recently released MatBench v0.1, a curated test suite of materials datasets. MODNet is shown… ▽ More As the number of novel data-driven approaches to material science continues to grow, it is crucial to perform consistent quality, reliability and applicability assessments of model performance. In this paper, we benchmark the Materials Optimal Descriptor Network (MODNet) method and architecture against the recently released MatBench v0.1, a curated test suite of materials datasets. MODNet is shown to outperform current leaders on 6 of the 13 tasks, whilst closely matching the current leaders on a further 2 tasks; MODNet performs particularly well when the number of samples is below 10,000. Attention is paid to two topics of concern when benchmarking models. First, we encourage the reporting of a more diverse set of metrics as it leads to a more comprehensive and holistic comparison of model performance. Second, an equally important task is the uncertainty assessment of a model towards a target domain. Significant variations in validation errors can be observed, depending on the imbalance and bias in the training set (i.e., similarity between training and application space). By using an ensemble MODNet model, confidence intervals can be built and the uncertainty on individual predictions can be quantified. Imbalance and bias issues are often overlooked, and yet are important for successful real-world applications of machine learning in materials science and condensed matter. △ Less

Submitted 7 July, 2021; v1 submitted 3 February, 2021; originally announced February 2021.

Journal ref: J. Phys.: Condens. Matter 33 404002 (2021)

Computational Investigation of Copper Phosphides as Conversion Anodes for Lithium-Ion Batteries

Authors: Angela F. Harper, Matthew L. Evans, Andrew J. Morris

Abstract: Using first principles structure searching with density-functional theory (DFT) we identify a novel $Fm\bar{3}m$ phase of Cu$_2$P and two low-lying metastable structures, an $I\bar{4}3d$--Cu$_3$P phase, and a $Cm$--Cu$_3$P$_{11}$ phase. The computed pair distribution function of the novel $Cm$--Cu$_3$P$_{11}$ phase shows its structural similarity to the experimentally identified $Cm$--Cu$_2$P$_7$… ▽ More Using first principles structure searching with density-functional theory (DFT) we identify a novel $Fm\bar{3}m$ phase of Cu$_2$P and two low-lying metastable structures, an $I\bar{4}3d$--Cu$_3$P phase, and a $Cm$--Cu$_3$P$_{11}$ phase. The computed pair distribution function of the novel $Cm$--Cu$_3$P$_{11}$ phase shows its structural similarity to the experimentally identified $Cm$--Cu$_2$P$_7$ phase. The relative stability of all Cu--P phases at finite temperatures is determined by calculating the Gibbs free energy using vibrational effects from phonon modes at 0 K. From this, a finite-temperature convex hull is created, on which $Fm\bar{3}m$--Cu$_2$P is dynamically stable and the Cu$_{3-x}$P ($x < 1$) defect phase $Cmc2_1$--Cu$_8$P$_3$ remains metastable (within 20 meV/atom of the convex hull) across a temperature range from 0 K to 600 K. Both CuP$_2$ and Cu$_3$P exhibit theoretical gravimetric capacities higher than contemporary graphite anodes for Li-ion batteries; the predicted Cu$_2$P phase has a theoretical gravimetric capacity of 508 mAh/g as a Li-ion battery electrode, greater than both Cu$_3$P (363 mAh/g) and graphite (372 mAh/g). Cu$_2$P is also predicted to be both non-magnetic and metallic, which should promote efficient electron transfer in the anode. Cu$_2$P's favorable properties as a metallic, high-capacity material suggest its use as a future conversion anode for Li-ion batteries; with a volume expansion of 99% during complete cycling, Cu$_2$P anodes could be more durable than other conversion anodes in the Cu--P system with volume expansions greater than 150%. △ Less

Submitted 26 June, 2020; v1 submitted 11 May, 2020; originally announced May 2020.

Comments: For associated data see https://github.com/harpaf13/data.copper-phosphides and https://doi.org/10.17863/CAM.52272

The simplest microscopic model of a complex fluid: flow phenomena and constitutive relation

Authors: R. M. L. Evans, Craig A. Hall, R. Aditi Simha, Tom Welsh

Abstract: It was shown in [PRL 114, 138301 (2015)] that a remarkably simple dynamical model exhibits many of the complex flow regimes and non-equilibrium phase transitions characteristic of complex fluids. By removing extraneous detail, this simplest microscopic model of non-Newtonian flow can reveal the universal physics relevant to all complex fluids. Here we present more detailed results and a full deriv… ▽ More It was shown in [PRL 114, 138301 (2015)] that a remarkably simple dynamical model exhibits many of the complex flow regimes and non-equilibrium phase transitions characteristic of complex fluids. By removing extraneous detail, this simplest microscopic model of non-Newtonian flow can reveal the universal physics relevant to all complex fluids. Here we present more detailed results and a full derivation of the model's compact mean-field constitutive relation, with great potential scope for insights into universality and tractable mathematics. By enforcing local conservation of angular momentum, the one-dimensional (1D) XY-model (originally used for equilibrium magnetic systems) can be driven into various flow regimes, including simple Newtonian behaviour, shear banding, solid-liquid coexistence and slip-plane motion. The model demonstrates that the phenomenon of shear banding does not rely on details of tensorial stress fields, but can exist in 1D. △ Less

Submitted 2 September, 2016; originally announced September 2016.

Comments: 16 pages

Interactions between unidirectional quantized vortex rings

Authors: T. Zhu, M. L. Evans, R. A. Brown, P. M. Walmsley, A. I. Golov

Abstract: We have used the vortex filament method to numerically investigate the interactions between pairs of quantized vortex rings that are initially traveling in the same direction but with their axes offset by a variable impact parameter. The interaction of two circular rings of comparable radii produce outcomes that can be categorized into four regimes, dependent only on the impact parameter; the two… ▽ More We have used the vortex filament method to numerically investigate the interactions between pairs of quantized vortex rings that are initially traveling in the same direction but with their axes offset by a variable impact parameter. The interaction of two circular rings of comparable radii produce outcomes that can be categorized into four regimes, dependent only on the impact parameter; the two rings can either miss each other on the inside or outside, or they can reconnect leading to final states consisting of either one or two deformed rings. The fraction of of energy went into ring deformations and the transverse component of velocity of the rings are analyzed for each regime. We find that rings of very similar radius only reconnect for a very narrow range of the impact parameter, much smaller than would be expected from geometrical cross-section alone. In contrast, when the radii of the rings are very different, the range of impact parameters producing a reconnection is close to the geometrical value. A second type of interaction considered is the collision of circular rings with a highly deformed ring. This type of interaction appears to be a productive mechanism for creating small vortex rings. The simulations are discussed in the context of experiments on colliding vortex rings and quantum turbulence in superfluid helium in the zero temperature limit. △ Less

Submitted 9 May, 2016; v1 submitted 14 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. Fluids 1, 044502 (2016)

Absence of dissipation in trajectory ensembles biased by currents

Authors: Robert L. Jack, R. M. L. Evans

Abstract: We consider biased ensembles of trajectories associated with large deviations of currents in equilibrium systems. The biased ensembles are characterised by non-zero currents and lack the time-reversal symmetry of the equilibrium state, but we show that they retain a generalised time-reversal symmetry, involving a spatial transformation that inverts the current. This means that these ensembles lack… ▽ More We consider biased ensembles of trajectories associated with large deviations of currents in equilibrium systems. The biased ensembles are characterised by non-zero currents and lack the time-reversal symmetry of the equilibrium state, but we show that they retain a generalised time-reversal symmetry, involving a spatial transformation that inverts the current. This means that these ensembles lack dissipation. Hence, they differ significantly from non-equilibrium steady states where currents are induced by external forces. One consequence of this result is that maximum entropy assumptions (MaxEnt/MaxCal), widely used for modelling thermal systems away from equilibrium, have quite unexpected implications, including apparent superfluid behaviour in a classical model of shear flow. △ Less

Submitted 11 February, 2016; originally announced February 2016.

Comments: 16 pages, 4 figs

Measuring local volume fraction, long-wavelength correlations and fractionation in a phase-separating polydisperse fluid

Authors: John J. Williamson, R. Mike L. Evans

Abstract: We dynamically simulate fractionation (partitioning of particle species) during spinodal gas-liquid separation of a size-polydisperse colloid, using polydispersity up to ~40% and a skewed parent size distribution. We introduce a novel coarse-grained Voronoi method to minimise size bias in measuring local volume fraction, along with a variety of spatial correlation functions which detect fractionat… ▽ More We dynamically simulate fractionation (partitioning of particle species) during spinodal gas-liquid separation of a size-polydisperse colloid, using polydispersity up to ~40% and a skewed parent size distribution. We introduce a novel coarse-grained Voronoi method to minimise size bias in measuring local volume fraction, along with a variety of spatial correlation functions which detect fractionation without requiring a clear distinction between the phases. These can be applied whether or not a system is phase separated, to determine structural correlations in particle size, and generalise easily to other kinds of polydispersity (charge, shape, etc.). We measure fractionation in both mean size and polydispersity between the phases, its direction differing between model interaction potentials which are identical in the monodisperse case. These qualitative features are predicted by a perturbative theory requiring only a monodisperse reference as input. The results show that intricate fractionation takes place almost from the start of phase separation, so can play a role even in nonequilibrium arrested states. The methods for characterisation of inhomogeneous polydisperse systems could in principle be applied to experiment as well as modelling. △ Less

Submitted 23 September, 2014; v1 submitted 24 July, 2014; originally announced July 2014.

Comments: 11 pages, 10 figures, in press (J. Chem. Phys.)

Numerical comparison of a constrained path ensemble and a driven quasisteady state

Authors: Milos Knezevic, R. M. L. Evans

Abstract: We investigate the correspondence between a non-equilibrium ensemble defined via the distribution of phase-space paths of a Hamiltonian system, and a system driven into a steady-state by non-equilibrium boundary conditions. To discover whether the non-equilibrium path ensemble adequately describes the physics of a driven system, we measure transition rates in a simple one-dimensional model of roto… ▽ More We investigate the correspondence between a non-equilibrium ensemble defined via the distribution of phase-space paths of a Hamiltonian system, and a system driven into a steady-state by non-equilibrium boundary conditions. To discover whether the non-equilibrium path ensemble adequately describes the physics of a driven system, we measure transition rates in a simple one-dimensional model of rotors with Newtonian dynamics and purely conservative interactions. We compare those rates with known properties of the non-equilibrium path ensemble. In doing so, we establish effective protocols for the analysis of transition rates in non-equilibrium quasi-steady states. Transition rates between potential wells and also between phase-space elements are studied, and found to exhibit distinct properties, the more coarse-grained potential wells being effectively further from equilibrium. In all cases the results from the boundary-driven system are close to the path-ensemble predictions, but the question of equivalence of the two remains open. △ Less

Submitted 24 January, 2014; v1 submitted 16 October, 2013; originally announced October 2013.

Comments: 9 pages, 17 figure panels

Journal ref: Phys. Rev. E 89, 012132 (2014)

Effects of the Carnahan-Starling free energy within theories of fluids with short-range attraction

Authors: John J. Williamson, R. Mike L. Evans, Wilson C. K. Poon, Siobhan M. Liddle

Abstract: Within the Free-Volume Asakura-Oosawa-Vrij (FVAO) theory of colloid-polymer mixtures, we show that unphysical gas-liquid binodals predicted in the regime of small attraction range (i.e. polymer size) are caused in part by the use of the Carnahan-Starling (CS) hard sphere (HS) reference free energy. Replacement of the CS expression with an alternative dramatically affects predicted phase behaviour… ▽ More Within the Free-Volume Asakura-Oosawa-Vrij (FVAO) theory of colloid-polymer mixtures, we show that unphysical gas-liquid binodals predicted in the regime of small attraction range (i.e. polymer size) are caused in part by the use of the Carnahan-Starling (CS) hard sphere (HS) reference free energy. Replacement of the CS expression with an alternative dramatically affects predicted phase behaviour and, for polydisperse colloid, the resultant fractionation predictions. Although short-range attractions render FVAO, as a perturbative HS-based theory, less accurate anyway, we argue that the particular effects of CS in this regime are an important consideration -- usually ignored -- in the evaluation of such theories. We refer to a variety of literature exhibiting similarly inaccurate gas-liquid binodals, and suggest CS's status as the de facto choice of hard sphere reference should be carefully considered where short-range attractions are present. △ Less

Submitted 2 July, 2014; v1 submitted 16 March, 2013; originally announced March 2013.

Comments: This paper has been withdrawn following a collaborative investigation of other theories which showed that the conclusions drawn here are important, for practical purposes, only in a small regime of volume fractions

The effects of polydispersity and metastability on crystal growth kinetics

Authors: John J. Williamson, R. Mike L. Evans

Abstract: We investigate the effect of metastable gas-liquid (G-L) separation on crystal growth in a system of either monodisperse or slightly size-polydisperse square well particles, using a simulation setup that allows us to focus on the growth of a single crystal. Our system parameters are such that, inside the metastable G-L binodal, a macroscopic layer of the gas phase "coats" the crystal as it grows,… ▽ More We investigate the effect of metastable gas-liquid (G-L) separation on crystal growth in a system of either monodisperse or slightly size-polydisperse square well particles, using a simulation setup that allows us to focus on the growth of a single crystal. Our system parameters are such that, inside the metastable G-L binodal, a macroscopic layer of the gas phase "coats" the crystal as it grows, consistent with experiment and theoretical free energy considerations. Crucially, the effect of this metastable G-L separation on the crystal growth rate depends qualitatively on whether the system is polydisperse. We measure reduced polydispersity and qualitatively different local size ordering in the crystal relative to the fluid, proposing that the required fractionation is dynamically facilitated by the gas layer. Our results show that polydispersity and metastability, both ubiquitous in soft matter, must be considered in tandem if their dynamical effects are to be understood. △ Less

Submitted 25 February, 2013; v1 submitted 18 August, 2012; originally announced August 2012.

Comments: Published in Soft Matter. DOI: 10.1039/C3SM27627A

Spinodal fractionation in a polydisperse square well fluid

Authors: John J. Williamson, R. Mike L. Evans

Abstract: Using Kinetic Monte Carlo simulation, we model gas-liquid spinodal decomposition in a size-polydisperse square well fluid, representing a 'near-monodisperse' colloidal dispersion. We find that fractionation (demixing) of particle sizes between the phases begins asserting itself shortly after the onset of phase ordering. Strikingly, the direction of size fractionation can be reversed by a seemingly… ▽ More Using Kinetic Monte Carlo simulation, we model gas-liquid spinodal decomposition in a size-polydisperse square well fluid, representing a 'near-monodisperse' colloidal dispersion. We find that fractionation (demixing) of particle sizes between the phases begins asserting itself shortly after the onset of phase ordering. Strikingly, the direction of size fractionation can be reversed by a seemingly trivial choice between two inter-particle potentials which, in the monodisperse case, are identical -- we rationalise this in terms of a perturbative, equilibrium theory of polydispersity. Furthermore, our quantitative results show that Kinetic Monte Carlo simulation can provide detailed insight into the role of fractionation in real colloidal systems. △ Less

Submitted 16 July, 2012; v1 submitted 17 February, 2012; originally announced February 2012.

Comments: 7 pages, 7 figures, to be published in Phys. Rev. E

Transforming from time to frequency without artefacts

Authors: R M L Evans

Abstract: I review a simple method, recently introduced to convert rheological compliance measurements into frequency-dependent moduli. New experimental data are presented, and the scientific implications of various data conversion methods discussed. I review a simple method, recently introduced to convert rheological compliance measurements into frequency-dependent moduli. New experimental data are presented, and the scientific implications of various data conversion methods discussed. △ Less

Submitted 24 November, 2009; originally announced November 2009.

Journal ref: British Society of Rheology Bulletin 50, 76 (2009)

Nonequilibrium statistical mechanics of shear flow: invariant quantities and current relations

Authors: A. Baule, R. M. L. Evans

Abstract: In modeling nonequilibrium systems one usually starts with a definition of the microscopic dynamics, e.g., in terms of transition rates, and then derives the resulting macroscopic behavior. We address the inverse question for a class of steady state systems, namely complex fluids under continuous shear flow: how does an externally imposed shear current affect the microscopic dynamics of the flui… ▽ More In modeling nonequilibrium systems one usually starts with a definition of the microscopic dynamics, e.g., in terms of transition rates, and then derives the resulting macroscopic behavior. We address the inverse question for a class of steady state systems, namely complex fluids under continuous shear flow: how does an externally imposed shear current affect the microscopic dynamics of the fluid? The answer can be formulated in the form of invariant quantities, exact relations for the transition rates in the nonequilibrium steady state, as discussed in a recent letter [A. Baule and R. M. L. Evans, Phys. Rev. Lett. 101, 240601 (2008)]. Here, we present a more pedagogical account of the invariant quantities and the theory underlying them, known as the nonequilibrium counterpart to detailed balance (NCDB). Furthermore, we investigate the relationship between the transition rates and the shear current in the steady state. We show that a fluctuation relation of the Gallavotti-Cohen type holds for systems satisfying NCDB. △ Less

Submitted 5 November, 2009; originally announced November 2009.

Comments: 24 pages, 11 figures

Statistical mechanics far from equilibrium: prediction and test for a sheared system

Authors: R. M. L. Evans, R. A. Simha, A. Baule, P. D. Olmsted

Abstract: We report the complete statistical treatment of a system of particles interacting via Newtonian forces in continuous boundary-driven flow, far from equilibrium. By numerically time-stepping the force-balance equations of a model fluid we measure occupancies and transition rates in simulation. The high-shear-rate simulation data verify the invariant quantities predicted by our statistical theory,… ▽ More We report the complete statistical treatment of a system of particles interacting via Newtonian forces in continuous boundary-driven flow, far from equilibrium. By numerically time-stepping the force-balance equations of a model fluid we measure occupancies and transition rates in simulation. The high-shear-rate simulation data verify the invariant quantities predicted by our statistical theory, thus demonstrating that a class of non-equilibrium steady states of matter, namely sheared complex fluids, is amenable to statistical treatment from first principles. △ Less

Submitted 4 November, 2009; originally announced November 2009.

Comments: 4 pages plus a 3-page pdf supplement

Measuring storage and loss moduli using optical tweezers: broadband microrheology

Authors: Manlio Tassieri, Graham M. Gibson, R. M. L. Evans, Alison M. Yao, Rebecca Warren, Miles J. Padgett, Jonathan M. Cooper

Abstract: We present an experimental procedure to perform broadband microrheological measurements with optical tweezers. A generalised Langevin equation is adopted to relate the time-dependent trajectory of a particle in an imposed flow to the frequency-dependent moduli of the complex fluid. This procedure allows us to measure the material linear viscoelastic properties across the widest frequency range a… ▽ More We present an experimental procedure to perform broadband microrheological measurements with optical tweezers. A generalised Langevin equation is adopted to relate the time-dependent trajectory of a particle in an imposed flow to the frequency-dependent moduli of the complex fluid. This procedure allows us to measure the material linear viscoelastic properties across the widest frequency range achievable with optical tweezers. △ Less

Submitted 7 October, 2009; originally announced October 2009.

Comments: 5 pages, 3 figures

Comment on `Detailed balance has a counterpart in non-equilibrium steady states'

Authors: Aditi Simha, R. M. L. Evans

Abstract: Transition rates in continuously driven steady states were derived in [Evans R M L, 2005 J. Phys. A: Math. Gen. 38, 293] by demanding that no information other than the microscopic laws of motion and the macroscopic observables of the system be used to describe it. In addition to the mean energy at equilibrium, and unlike them, these driven states have a finite throughput of flux. This implies t… ▽ More Transition rates in continuously driven steady states were derived in [Evans R M L, 2005 J. Phys. A: Math. Gen. 38, 293] by demanding that no information other than the microscopic laws of motion and the macroscopic observables of the system be used to describe it. In addition to the mean energy at equilibrium, and unlike them, these driven states have a finite throughput of flux. This implies that the (nonequilibrium) reservoir, to which the system is weakly coupled, is fully characterised by its mean energy and mean flux. While we expect the resulting prescription for the rates in continuous and discretised time versions of models of real systems to be equivalent, it is not trivial to see this from the expression for the rates derived previously. We demonstrate this equivalence for a model of activated processes solved previously for continuous time, thus demonstrating consistency of theory. △ Less

Submitted 4 November, 2009; v1 submitted 30 January, 2009; originally announced January 2009.

Comments: 3 pages, 3 figures

Direct conversion of rheological compliance measurements into storage and loss moduli

Authors: R M L Evans, Manlio Tassieri, Dietmar Auhl, Thomas A Waigh

Abstract: We remove the need for Laplace/inverse-Laplace transformations of experimental data, by presenting a direct and straightforward mathematical procedure for obtaining frequency-dependent storage and loss moduli ($G'(ω)$ and $G"(ω)$ respectively), from time-dependent experimental measurements. The procedure is applicable to ordinary rheological creep (stress-step) measurements, as well as all micro… ▽ More We remove the need for Laplace/inverse-Laplace transformations of experimental data, by presenting a direct and straightforward mathematical procedure for obtaining frequency-dependent storage and loss moduli ($G'(ω)$ and $G"(ω)$ respectively), from time-dependent experimental measurements. The procedure is applicable to ordinary rheological creep (stress-step) measurements, as well as all microrheological techniques, whether they access a Brownian mean-square displacement, or a forced compliance. Data can be substituted directly into our simple formula, thus eliminating traditional fitting and smoothing procedures that disguise relevant experimental noise. △ Less

Submitted 12 December, 2008; originally announced December 2008.

Comments: 4 pages

Journal ref: Phys. Rev. E 80, 012501 (2009).

Invariant quantities in shear flow

Authors: A. Baule, R. M. L. Evans

Abstract: The dynamics of systems out of thermal equilibrium is usually treated on a case-by-case basis without knowledge of fundamental and universal principles. We address this problem for a class of driven steady states, namely those mechanically driven at the boundaries such as complex fluids under shear. From a nonequilibrium counterpart to detailed balance (NCDB) we derive a remarkably simple set of… ▽ More The dynamics of systems out of thermal equilibrium is usually treated on a case-by-case basis without knowledge of fundamental and universal principles. We address this problem for a class of driven steady states, namely those mechanically driven at the boundaries such as complex fluids under shear. From a nonequilibrium counterpart to detailed balance (NCDB) we derive a remarkably simple set of invariant quantities which remain unchanged when the system is driven. These new nonequilibrium relations are both exact and valid arbitrarily far from equilibrium. Furthermore, they enable the systematic calculation of transition rates in driven systems with state-spaces of arbitrary connectivity. △ Less

Submitted 8 August, 2008; originally announced August 2008.

Comments: 4 pages, 2 figures

Journal ref: Phys.Rev.Lett.101:240601,2008

Properties of a non-equilibrium heat bath

Authors: Aditi Simha, R. M. L. Evans, A. Baule

Abstract: At equilibrium, a fluid element, within a larger heat bath, receives random impulses from the bath. Those impulses, which induce stochastic transitions in the system (the fluid element), respect the principle of detailed balance, because the bath is also at equilibrium. Under continuous shear, the fluid element adopts a non-equilibrium steady state. Because the surrounding bath of fluid under sh… ▽ More At equilibrium, a fluid element, within a larger heat bath, receives random impulses from the bath. Those impulses, which induce stochastic transitions in the system (the fluid element), respect the principle of detailed balance, because the bath is also at equilibrium. Under continuous shear, the fluid element adopts a non-equilibrium steady state. Because the surrounding bath of fluid under shear is also in a non-equilibrium steady state, the system receives stochastic impulses with a non-equilibrium distribution. Those impulses no longer respect detailed balance, but are nevertheless constrained by rules. The rules in question, which are applicable to a wide sub-class of driven steady states, were recently derived [R. M. L. Evans, Phys. Rev. Lett. {\bf 92}, 150601 (2004); J. Phys. A: Math. Gen. {\bf 38}, 293 (2005)] using information-theoretic arguments. In the present paper, we provide a more fundamental derivation, based on the uncontroversial, non-Bayesian interpretation of probabilities as simple ratios of countable quantities. We apply the results to some simple models of interacting particles, to investigate the nature of forces that are mediated by a non-equilibrium noise-source such as a fluid under shear. △ Less

Submitted 12 November, 2007; originally announced November 2007.

Comments: 14 pages, 7 figures

Dynamics of semi-flexible polymer solutions in the highly entangled regime

Authors: Manlio Tassieri, R. M. L. Evans, Lucian Barbu-Tudoran, G. Nasir Khan, John Trinick, Tom A. Waigh

Abstract: We present experimental evidence that the effective medium approximation (EMA), developed by D.C. Morse [Phys. Rev. E {\bf 63}, 031502, (2001)], provides the correct scaling law of the macroscopic plateau modulus $G^{0}\proptoρ^{4/3}L^{-1/3}_{p}$ (where $ρ$ is the contour length per unit volume and $L_{p}$ is the persistence length) of semi-flexible polymer solutions, in the highly entangled con… ▽ More We present experimental evidence that the effective medium approximation (EMA), developed by D.C. Morse [Phys. Rev. E {\bf 63}, 031502, (2001)], provides the correct scaling law of the macroscopic plateau modulus $G^{0}\proptoρ^{4/3}L^{-1/3}_{p}$ (where $ρ$ is the contour length per unit volume and $L_{p}$ is the persistence length) of semi-flexible polymer solutions, in the highly entangled concentration regime. Competing theories, including a self-consistent binary collision approximation (BCA), have instead predicted $G^{0}\proptoρ^{7/5}L^{-1/5}_{p}$. We have tested both the EMA and BCA scaling predictions using actin filament (F-actin) solutions which permit experimental control of $L_p$ independently of other parameters. A combination of passive video particle tracking microrheology and dynamic light scattering yields independent measurements of the elastic modulus $G$ and $L_{p}$ respectively. Thus we can distinguish between the two proposed laws, in contrast to previous experimental studies, which focus on the (less discriminating) concentration functionality of $G$. △ Less

Submitted 17 October, 2008; v1 submitted 5 August, 2007; originally announced August 2007.

Comments: 4 pages, 6 figures, Phys. Rev. Lett. (accepted)

Validation of the Jarzynski relation for a system with strong thermal coupling: an isothermal ideal gas model

Authors: A. Baule, R. M. L. Evans, P. D. Olmsted

Abstract: We revisit the paradigm of an ideal gas under isothermal conditions. A moving piston performs work on an ideal gas in a container that is strongly coupled to a heat reservoir. The thermal coupling is modelled by stochastic scattering at the boundaries. In contrast to recent studies of an adiabatic ideal gas with a piston [R.C. Lua and A.Y. Grosberg, \textit{J. Phys. Chem. B} 109, 6805 (2005); I.… ▽ More We revisit the paradigm of an ideal gas under isothermal conditions. A moving piston performs work on an ideal gas in a container that is strongly coupled to a heat reservoir. The thermal coupling is modelled by stochastic scattering at the boundaries. In contrast to recent studies of an adiabatic ideal gas with a piston [R.C. Lua and A.Y. Grosberg, \textit{J. Phys. Chem. B} 109, 6805 (2005); I. Bena et al., \textit{Europhys. Lett.} 71, 879 (2005)], container and piston stay in contact with the heat bath during the work process. Under this condition the heat reservoir as well as the system depend on the work parameter $λ$ and microscopic reversibility is broken for a moving piston. Our model is thus not included in the class of systems for which the non-equilibrium work theorem has been derived rigorously either by Hamiltonian [C. Jarzynski, \textit{J. Stat. Mech.} P09005 (2004)] or stochastic methods [G.E. Crooks, \textit{J. Stat. Phys.} 90, 1481 (1998)]. Nevertheless the validity of the non-equilibrium work theorem is confirmed both numerically for a wide range of parameter values and analytically in the limit of a very fast moving piston, i.e. in the far non-equilibrium regime. △ Less

Submitted 31 July, 2008; v1 submitted 22 July, 2006; originally announced July 2006.

Comments: 11 pages, 8 figures

Journal ref: Physical Review E 74, 061117 (2006)

Detailed balance has a counterpart in non-equilibrium steady states

Authors: R. M. L. Evans

Abstract: When modelling driven steady states of matter, it is common practice either to choose transition rates arbitrarily, or to assume that the principle of detailed balance remains valid away from equilibrium. Neither of those practices is theoretically well founded. Hypothesising ergodicity constrains the transition rates in driven steady states to respect relations analogous to, but different from… ▽ More When modelling driven steady states of matter, it is common practice either to choose transition rates arbitrarily, or to assume that the principle of detailed balance remains valid away from equilibrium. Neither of those practices is theoretically well founded. Hypothesising ergodicity constrains the transition rates in driven steady states to respect relations analogous to, but different from the equilibrium principle of detailed balance. The constraints arise from demanding that the design of any model system contains no information extraneous to the microscopic laws of motion and the macroscopic observables. This prevents over-description of the non-equilibrium reservoir, and implies that not all stochastic equations of motion are equally valid. The resulting recipe for transition rates has many features in common with equilibrium statistical mechanics. △ Less

Submitted 15 November, 2004; v1 submitted 27 August, 2004; originally announced August 2004.

Comments: Replaced with minor revisions to introduction and conclusions. Accepted for publication in Journal of Physics A

Rules for transition rates in nonequilibrium steady states

Authors: R. M. L. Evans

Abstract: Just as transition rates in a canonical ensemble must respect the principle of detailed balance, constraints exist on transition rates in driven steady states. I derive those constraints, by maximum information-entropy inference, and apply them to the steady states of driven diffusion and a sheared lattice fluid. The resulting ensemble can potentially explain nonequilibrium phase behaviour and,… ▽ More Just as transition rates in a canonical ensemble must respect the principle of detailed balance, constraints exist on transition rates in driven steady states. I derive those constraints, by maximum information-entropy inference, and apply them to the steady states of driven diffusion and a sheared lattice fluid. The resulting ensemble can potentially explain nonequilibrium phase behaviour and, for steady shear, gives rise to stress-mediated long-range interactions. △ Less

Submitted 20 February, 2004; originally announced February 2004.

Comments: 4 pages. To appear in Physical Review Letters

Correlation length by measuring empty space in simulated aggregates

Authors: R. M. L. Evans, M. D. Haw

Abstract: We examine the geometry of the spaces between particles in diffusion-limited cluster aggregation, a numerical model of aggregating suspensions. Computing the distribution of distances from each point to the nearest particle, we show that it has a scaled form independent of the concentration phi, for both two- (2D) and three-dimensional (3D) model gels at low phi. The mean remoteness is proportio… ▽ More We examine the geometry of the spaces between particles in diffusion-limited cluster aggregation, a numerical model of aggregating suspensions. Computing the distribution of distances from each point to the nearest particle, we show that it has a scaled form independent of the concentration phi, for both two- (2D) and three-dimensional (3D) model gels at low phi. The mean remoteness is proportional to the density-density correlation length of the gel, xi, allowing a more precise measurement of xi than by other methods. A simple analytical form for the scaled remoteness distribution is developed, highlighting the geometrical information content of the data. We show that the second moment of the distribution gives a useful estimate of the permeability of porous media. △ Less

Submitted 12 February, 2002; originally announced February 2002.

Comments: 4 pages

Diffusive growth of polydisperse hard-sphere crystals

Authors: R. M. L. Evans, C. B. Holmes

Abstract: Unlike atoms, colloidal particles are not identical, but can only be synthesised within a finite size tolerance. Colloids are therefore polydisperse, i.e. mixtures of infinitely many components with sizes drawn from a continuous distribution. We model the crystallisation of hard-sphere colloids (with/without attractions) from an initially amorphous phase. Though the polydisperse hard-sphere phas… ▽ More Unlike atoms, colloidal particles are not identical, but can only be synthesised within a finite size tolerance. Colloids are therefore polydisperse, i.e. mixtures of infinitely many components with sizes drawn from a continuous distribution. We model the crystallisation of hard-sphere colloids (with/without attractions) from an initially amorphous phase. Though the polydisperse hard-sphere phase diagram has been widely studied, it is not straightforwardly applicable to real colloidal crystals, since they are inevitably out of equilibrium. The process by which colloidal crystals form determines the size distribution of the particles that comprise them. Once frozen into the crystal lattice, the particles are caged so that the composition cannot subsequently relax to the equilibrium optimum. We predict that the mean size of colloidal particles incorporated into a crystal is smaller than anticipated by equilibrium calculations. This is because small particles diffuse fastest and therefore arrive at the crystal in disproportionate abundance. △ Less

Submitted 21 February, 2001; originally announced February 2001.

Comments: 12 pages, 5 figures

Perturbative polydispersity: Phase equilibria of near-monodisperse systems

Authors: R. M. L. Evans

Abstract: The conditions of multi-phase equilibrium are solved for generic polydisperse systems. The case of multiple polydispersity is treated, where several properties (e.g. size, charge, shape) simultaneously vary from one particle to another. By developing a perturbative expansion in the width of the distribution of constituent species, it is possible to calculate the effects of polydispersity alone,… ▽ More The conditions of multi-phase equilibrium are solved for generic polydisperse systems. The case of multiple polydispersity is treated, where several properties (e.g. size, charge, shape) simultaneously vary from one particle to another. By developing a perturbative expansion in the width of the distribution of constituent species, it is possible to calculate the effects of polydispersity alone, avoiding difficulties associated with the underlying many-body problem. Explicit formulae are derived in detail, for the partitioning of species at coexistence and for the shift of phase boundaries due to polydispersity. `Convective fractionation' is quantified, whereby one property (e.g. charge) is partitioned between phases due to a driving force on another. To demonstrate the ease of use and versatility of the formulae, they are applied to models of a chemically-polydisperse polymer blend, and of fluid-fluid coexistence in polydisperse colloid-polymer mixtures. In each case, the regime of coexistence is shown to be enlarged by polydispersity. △ Less

Submitted 21 July, 2000; originally announced July 2000.

Comments: 22 pages, 3 figures

Fractionation of polydisperse systems: multi-phase coexistence

Authors: R. M. L. Evans

Abstract: The width of the distribution of species in a polydisperse system is employed in a small-variable expansion, to obtain a well-controlled and compact scheme by which to calculate phase equilibria in multi-phase systems. General and universal relations are derived, which determine the partitioning of the fluid components among the phases. The analysis applies to mixtures of arbitrarily many slight… ▽ More The width of the distribution of species in a polydisperse system is employed in a small-variable expansion, to obtain a well-controlled and compact scheme by which to calculate phase equilibria in multi-phase systems. General and universal relations are derived, which determine the partitioning of the fluid components among the phases. The analysis applies to mixtures of arbitrarily many slightly-polydisperse components. An explicit solution is approximated for hard spheres. △ Less

Submitted 26 January, 1999; originally announced January 1999.

Comments: 4 pages, 1 figure

Diffusion and rheology in a model of glassy materials

Authors: R. M. L. Evans, M. E. Cates, P. Sollich

Abstract: We study self-diffusion within a simple hopping model for glassy materials. (The model is Bouchaud's model of glasses [J.-P. Bouchaud, J. Physique I 2, 1705 (1992)], as extended to describe rheological properties [P. Sollich, F. Lequeux, P. Hebraud and M.E. Cates, Phys. Rev. Lett. 78, 2020 (1997)].) We investigate the breakdown, near the glass transition, of the (generalized) Stokes-Einstein rel… ▽ More We study self-diffusion within a simple hopping model for glassy materials. (The model is Bouchaud's model of glasses [J.-P. Bouchaud, J. Physique I 2, 1705 (1992)], as extended to describe rheological properties [P. Sollich, F. Lequeux, P. Hebraud and M.E. Cates, Phys. Rev. Lett. 78, 2020 (1997)].) We investigate the breakdown, near the glass transition, of the (generalized) Stokes-Einstein relation between self-diffusion of a tracer particle and the (frequency-dependent) viscosity of the system as a whole. This stems from the presence of a broad distribution of relaxation times of which different moments control diffusion and rheology. We also investigate the effect of flow (oscillatory shear) on self-diffusion and show that this causes a finite diffusivity in the temperature regime below the glass transition (where this was previously zero). At higher temperatures the diffusivity is enhanced by a power law frequency dependence that also characterises the rheological response. The relevance of these findings to soft glassy materials (foams, emulsions etc.) as well as to conventional glass-forming liquids is discussed. △ Less

Submitted 25 January, 1999; originally announced January 1999.

Comments: 39 page (double spaced), 2 figures

Diffusive Evolution of Stable and Metastable Phases II: Theory of Non-Equilibrium Behaviour in Colloid-Polymer Mixtures

Authors: R. M. L. Evans, W. C. K. Poon

Abstract: By analytically solving some simple models of phase-ordering kinetics, we suggest a mechanism for the onset of non-equilibrium behaviour in colloid-polymer mixtures. These mixtures can function as models of atomic systems; their physics therefore impinges on many areas of thermodynamics and phase-ordering. An exact solution is found for the motion of a single, planar interface separating a growi… ▽ More By analytically solving some simple models of phase-ordering kinetics, we suggest a mechanism for the onset of non-equilibrium behaviour in colloid-polymer mixtures. These mixtures can function as models of atomic systems; their physics therefore impinges on many areas of thermodynamics and phase-ordering. An exact solution is found for the motion of a single, planar interface separating a growing phase of uniform high density from a supersaturated low density phase, whose diffusive depletion drives the interfacial motion. In addition, an approximate solution is found for the one-dimensional evolution of two interfaces, separated by a slab of a metastable phase at intermediate density. The theory predicts a critical supersaturation of the low-density phase, above which the two interfaces become unbound and the metastable phase grows ad infinitum. The growth of the stable phase is suppressed in this regime. △ Less

Submitted 20 January, 1997; originally announced January 1997.

Comments: 27 pages, Latex, epsf

Diffusive Evolution of Stable and Metastable Phases I: Local Dynamics of Interfaces

Authors: R. M. L. Evans, M. E. Cates

Abstract: We find analytical solutions to the Cahn-Hilliard equation for the dynamics of an interface in a system with a conserved order parameter (Model B). We show that, although steady-state solutions of Model B are unphysical in the far-field, they shed light on the local dynamics of an interface. Exact solutions are given for a particular class of order-parameter potentials, and an expandable integra… ▽ More We find analytical solutions to the Cahn-Hilliard equation for the dynamics of an interface in a system with a conserved order parameter (Model B). We show that, although steady-state solutions of Model B are unphysical in the far-field, they shed light on the local dynamics of an interface. Exact solutions are given for a particular class of order-parameter potentials, and an expandable integral equation is derived for the general case. As well as revealing some generic properties of interfaces moving under condensation or evaporation, the formalism is used to investigate two distinct modes of interface propagation in systems with a metastable potential well. Given a sufficient transient increase in the flux of material onto a condensation nucleus, the normal motion of the interface can be disrupted by interfacial unbinding, leading to growth of a macroscopic amount of a metastable phase. △ Less

Submitted 20 January, 1997; originally announced January 1997.

Comments: 23 pages, Latex, epsf

Role of Metastable States in Phase Ordering Dynamics

Authors: R. M. L. Evans, W. C. K. Poon, M. E. Cates

Abstract: We show that the rate of separation of two phases of different densities (e.g. gas and solid) can be radically altered by the presence of a metastable intermediate phase (e.g. liquid). Within a Cahn-Hilliard theory we study the growth in one dimension of a solid droplet from a supersaturated gas. A moving interface between solid and gas phases (say) can, for sufficient (transient) supersaturatio… ▽ More We show that the rate of separation of two phases of different densities (e.g. gas and solid) can be radically altered by the presence of a metastable intermediate phase (e.g. liquid). Within a Cahn-Hilliard theory we study the growth in one dimension of a solid droplet from a supersaturated gas. A moving interface between solid and gas phases (say) can, for sufficient (transient) supersaturation, unbind into two interfaces separated by a slab of metastable liquid phase. We investigate the criteria for unbinding, and show that it may strongly impede the growth of the solid phase. △ Less

Submitted 20 January, 1997; v1 submitted 15 January, 1997; originally announced January 1997.

Comments: 4 pages, Latex, Revtex, epsf. Updated two references

Theoretical Study of Fluid Membranes of Spherical Topology with Internal Degrees of Freedom

Authors: R. M. L. Evans

Abstract: A theoretical study of vesicles of topological genus zero is presented. The bilayer membranes forming the vesicles have various degrees of intrinsic (tangent-plane) orientational order, ranging from smectic to hexatic, frustrated by curvature and topology. The field-theoretical model for these `$n$-atic' surfaces has been studied before in the low temperature (mean-field) limit. Work presented h… ▽ More A theoretical study of vesicles of topological genus zero is presented. The bilayer membranes forming the vesicles have various degrees of intrinsic (tangent-plane) orientational order, ranging from smectic to hexatic, frustrated by curvature and topology. The field-theoretical model for these `$n$-atic' surfaces has been studied before in the low temperature (mean-field) limit. Work presented here includes the effects of thermal fluctuations. Using the lowest Landau level approximation, the coupling between order and shape is cast in a simple form, facilitating insights into the behaviour of vesicles. The order parameter contains vortices, whose effective interaction potential is found, and renormalized by membrane fluctuations. The shape of the phase space has a counter-intuitive influence on this potential. A criterion is established whereby a vesicle of finite rigidity may be burst by its own in-plane order, and an analogy is drawn with flux exclusion from a type-I superconductor. △ Less

Submitted 27 June, 1995; originally announced June 1995.

Comments: 34 pages + 4 Postscript figures. Uses RevTeX

Phase Diagrams for Deformable Toroidal and Spherical Surfaces with Intrinsic Orientational Order

Authors: R. M. L. Evans

Abstract: A theoretical study of toroidal membranes with various degrees of intrinsic orientational order is presented at mean-field level. The study uses a simple Ginzburg-Landau style free energy functional, which gives rise to a rich variety of physics and reveals some unusual ordered states. The system is found to exhibit many different phases with continuous and first order phase transitions, and phe… ▽ More A theoretical study of toroidal membranes with various degrees of intrinsic orientational order is presented at mean-field level. The study uses a simple Ginzburg-Landau style free energy functional, which gives rise to a rich variety of physics and reveals some unusual ordered states. The system is found to exhibit many different phases with continuous and first order phase transitions, and phenomena including spontaneous symmetry breaking, ground states with nodes and the formation of vortex-antivortex quartets. Transitions between toroidal phases with different configurations of the order parameter and different aspect ratios are plotted as functions of the thermodynamic parameters. Regions of the phase diagrams in which spherical vesicles form are also shown. △ Less

Submitted 3 October, 1994; originally announced October 1994.

Comments: 40, revtex (with epsf), M/C.TH.94/20