-
Current-phase relation of a short multi-mode Bi2Se3 topological insulator nanoribbon Josephson junction with ballistic transport modes
Authors:
Ananthu P. Surendran,
Domenico Montemurro,
Gunta Kunakova,
Xavier Palermo,
Kiryl Niherysh,
Edoardo trabaldo,
Dmitry Golubev,
Jana Andzane,
Donats Erts,
Floriana Lombardi,
Thilo Bauch
Abstract:
We used the asymmetric superconducting quantum interference device (SQUID) technique to extract the current phase relation (CPR) of a Josephson junction with a 3D-topological insulator (TI) Bi2Se3 nanobelt as the barrier. The obtained CPR shows deviations from the standard sinusoidal CPR with a pronounced forward skewness. At temperatures below 200 mK, the junction skewness values are above the ze…
▽ More
We used the asymmetric superconducting quantum interference device (SQUID) technique to extract the current phase relation (CPR) of a Josephson junction with a 3D-topological insulator (TI) Bi2Se3 nanobelt as the barrier. The obtained CPR shows deviations from the standard sinusoidal CPR with a pronounced forward skewness. At temperatures below 200 mK, the junction skewness values are above the zero temperature limit for short diffusive junctions. Fitting of the extracted CPR shows that most of the supercurrent is carried by ballistic topological surface states (TSSs), with a small contribution of diffusive channels primarily due to the bulk. These findings are instrumental in engineering devices that can fully exploit the properties of the topologically protected surface states of 3D TIs.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Topological insulator nanoribbon Josephson junctions: evidence for size effect in transport properties
Authors:
Gunta Kunakova,
Ananthu P. Surendran,
Domenico Montemurro,
Matteo Salvato,
Dmitry Golubev,
Jana Andzane,
Donats Erts,
Thilo Bauch,
Floriana Lombardi
Abstract:
We have used Bi$_2$Se$_3$ nanoribbons, grown by catalyst-free Physical Vapor Deposition to fabricate high quality Josephson junctions with Al superconducting electrodes. In our devices we observe a pronounced reduction of the Josephson critical current density $J_c$ by reducing the width of the junction, which in our case corresponds to the width of the nanoribbon. Because the topological surface…
▽ More
We have used Bi$_2$Se$_3$ nanoribbons, grown by catalyst-free Physical Vapor Deposition to fabricate high quality Josephson junctions with Al superconducting electrodes. In our devices we observe a pronounced reduction of the Josephson critical current density $J_c$ by reducing the width of the junction, which in our case corresponds to the width of the nanoribbon. Because the topological surface states extend over the entire circumference of the nanoribbon, the superconducting transport associated to them is carried by modes on both the top and bottom surfaces of the nanoribbon. We show that the $J_c$ reduction as a function of the nanoribbons width can be accounted for by assuming that only the modes travelling on the top surface contribute to the Josephson transport as we derive by geometrical consideration. This finding is of a great relevance for topological quantum circuitry schemes, since it indicates that the Josephson current is mainly carried by the topological surface states.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
High transparency Bi2Se3 topological insulator nanoribbon Josephson junctions with low resistive noise properties
Authors:
Gunta Kunakova,
Thilo Bauch,
Edoardo Trabaldo,
Jana Andzane,
Donats Erts,
Floriana Lombardi
Abstract:
Bi$_2$Se$_3$ nanoribbons, grown by catalyst-free Physical Vapour Deposition, have been used to fabricate high quality Josephson junctions with Al superconducting electrodes. The conductance spectra (dI/dV) of the junctions show clear dip-peak structures characteristic of multiple Andreev reflections. The temperature dependence of the dip-peak features reveals a highly transparent Al/Bi$_2$Se$_3$ t…
▽ More
Bi$_2$Se$_3$ nanoribbons, grown by catalyst-free Physical Vapour Deposition, have been used to fabricate high quality Josephson junctions with Al superconducting electrodes. The conductance spectra (dI/dV) of the junctions show clear dip-peak structures characteristic of multiple Andreev reflections. The temperature dependence of the dip-peak features reveals a highly transparent Al/Bi$_2$Se$_3$ topological insulator nanoribbon interface and Josephson junction barrier. This is supported by the high values of the Bi$_2$Se$_3$ induced gap and of I$_c$R$_n$ (I$_c$ critical current, R$_n$ normal resistance of the junction) product both of the order of 160 $μ$eV, a value close to the Al gap. The devices present an extremely low relative resistance noise below 1$\times$10$^{-12}$ $μ$m$^2$/Hz comparable to the best Al tunnel junctions, which indicates a high stability in the transmission coefficients of transport channels. The ideal Al/Bi$_2$Se$_3$ interface properties, perfect transparency for Cooper pair transport in conjunction with low resistive noise make these junctions a suitable platform for further studies of the induced topological superconductivity and Majorana bound states physics.
△ Less
Submitted 2 October, 2019; v1 submitted 1 October, 2019;
originally announced October 2019.
-
Bulk-Free Topological Insulator Bi2Se3 nanoribbons with Magnetotransport Signatures of Dirac Surface States
Authors:
Gunta Kunakova,
Luca Galletti,
Sophie Charpentier,
Jana Andzane,
Donats Erts,
Francois Leonard,
Catalin D. Spataru,
Thilo Bauch,
Floriana Lombardi
Abstract:
Many applications for topological insulators (TIs) as well as new phenomena require devices with reduced dimensions. While much progress has been made to realize thin films of TIs with low bulk carrier density, nanostructures have not yet been reported with similar properties, despite the fact that size confinement should help reduce contributions from bulk carriers. Here we demonstrate that Bi2Se…
▽ More
Many applications for topological insulators (TIs) as well as new phenomena require devices with reduced dimensions. While much progress has been made to realize thin films of TIs with low bulk carrier density, nanostructures have not yet been reported with similar properties, despite the fact that size confinement should help reduce contributions from bulk carriers. Here we demonstrate that Bi2Se3 nanoribbons, grown by a simple catalyst-free physical-vapour deposition, have inherently low bulk carrier densities, and can be further made bulk-free by size confinement, thus revealing the high mobility topological surface states. Magneto transport and Hall conductance measurements, in single nanoribbons, show that at thicknesses below 30nm the bulk transport is completely suppressed which is supported by self-consistent band-bending calculations. The results highlight the importance of material growth and geometrical confinement to properly exploit the unique properties of the topological surface states.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Direct identification of dilute surface spins on Al$_2$O$_3$: Origin of flux noise in quantum circuits
Authors:
S. E. de Graaf,
A. A. Adamyan,
T. Lindström,
D. Erts,
S. E. Kubatkin,
A. Ya. Tzalenchuk,
A. V. Danilov
Abstract:
It is universally accepted that noise and decoherence affecting the performance of superconducting quantum circuits are consistent with the presence of spurious two-level systems (TLS). In recent years bulk defects have been generally ruled out as the dominant source, and the search has focused on surfaces and interfaces. Despite a wide range of theoretical models and experimental efforts, the ori…
▽ More
It is universally accepted that noise and decoherence affecting the performance of superconducting quantum circuits are consistent with the presence of spurious two-level systems (TLS). In recent years bulk defects have been generally ruled out as the dominant source, and the search has focused on surfaces and interfaces. Despite a wide range of theoretical models and experimental efforts, the origin of these surface TLS still remains largely unknown, making further mitigation of TLS induced decoherence extremely challenging. Here we use a recently developed on-chip electron spin resonance (ESR) technique that allows us to detect spins with a very low surface coverage. We combine this technique with various surface treatments specifically to reveal the nature of native surface spins on Al$_2$O$_3$ -- the mainstay of almost all solid state quantum devices. On a large number of samples we resolve three ESR peaks with the measured total paramagnetic spin density $n=2.2\times 10^{17}$m$^{-2}$, which matches the density inferred from the flux noise in SQUIDs. We show that two of these peaks originate from physisorbed atomic hydrogen which appears on the surface as a by-product of water dissociation. We suggest that the third peak is due to molecular oxygen on the Al$_2$O$_3$ surface captured at strong Lewis base defect sites, producing charged O$_2^-$. These results provide important information towards the origin of charge and flux noise in quantum circuits. Our findings open up a whole new approach to identification and controlled reduction of paramagnetic sources of noise in solid state quantum devices.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Longitudinal spin-relaxation in nitrogen-vacancy centers in electron irradiated diamond
Authors:
A. Jarmola,
A. Berzins,
J. Smits,
K. Smits,
J. Prikulis,
F. Gahbauer,
R. Ferber,
D. Erts,
M. Auzinsh,
D. Budker
Abstract:
We present systematic measurements of longitudinal relaxation rates ($1/T_1$) of spin polarization in the ground state of the nitrogen-vacancy (NV$^-$) color center in synthetic diamond as a function of NV$^-$ concentration and magnetic field $B$. NV$^-$ centers were created by irradiating a Type 1b single-crystal diamond along the [100] axis with 200 keV electrons from a transmission electron mic…
▽ More
We present systematic measurements of longitudinal relaxation rates ($1/T_1$) of spin polarization in the ground state of the nitrogen-vacancy (NV$^-$) color center in synthetic diamond as a function of NV$^-$ concentration and magnetic field $B$. NV$^-$ centers were created by irradiating a Type 1b single-crystal diamond along the [100] axis with 200 keV electrons from a transmission electron microscope with varying doses to achieve spots of different NV$^-$ center concentrations. Values of ($1/T_1$) were measured for each spot as a function of $B$.
△ Less
Submitted 19 November, 2015;
originally announced November 2015.
