-
Magnetic single wall CrI3 nanotubes encapsulated within multiwall Carbon Nanotubes
Authors:
Ihsan Caha,
Loukya Boddapatti,
Aqrab ul Ahmad,
Manuel Banobre,
Antonio T. Costa,
Andrey N. Enyashin,
Weibin Li,
Pierluigi Gargiani,
Manuel Valvidares,
Joaquin Fernandez-Rossier,
Francis Leonard Deepak
Abstract:
CrI3 is a layered ferromagnetic insulator that has recently attracted enormous interest as it was the first example of a stand-alone monolayer ferromagnet, paving the way towards the study of two-dimensional magnetic materials and their use as building blocks of hybrid van der Waals layered heterostructures. Here we go one step down in the dimensionality ladder and report the synthesis and charact…
▽ More
CrI3 is a layered ferromagnetic insulator that has recently attracted enormous interest as it was the first example of a stand-alone monolayer ferromagnet, paving the way towards the study of two-dimensional magnetic materials and their use as building blocks of hybrid van der Waals layered heterostructures. Here we go one step down in the dimensionality ladder and report the synthesis and characterization of a tubular one-dimensional van der Waals heterostructure where CrI3 nanotubes are encapsulated within multiwall carbon nanotubes, integrating a magnetic insulator and a conductor. By means of the capillary filling of multi-wall carbon nanotubes (MWCNT), we obtained single-wall CrI3 nanotubes with diameters ranging between 2 nm and 10 nm, with an average of 5.3 nm. Using aberration corrected electron microscopy in combination with spectroscopic techniques we confirm the structure and chemical composition of the nanotubes. SQUID measurements, combined with element-specific X-ray magnetic circular dichroism (XMCD) indicate unequivocally that the Cr atoms in encapsulated CrI3 nanotubes are magnetic with a collective state compatible with a radial magnetization state predicted both by first-principles calculations and a model Hamiltonian. Our results represent a step forward in establishing 1D van der Waals heterostructures as a playground for the exploration of non-collinear magnetic states arising from the interplay between magnetic anisotropy and curvature in tubular geometries.
△ Less
Submitted 2 April, 2025; v1 submitted 23 May, 2024;
originally announced May 2024.
-
Defect-induced conductivity anisotropy in MoS2 monolayers
Authors:
Mahdi Ghorbani-Asl,
Andrey N. Enyashin,
Agnisezka Kuc,
Gotthard Seifert,
Thomas Heine
Abstract:
Various types of defects in MoS2 monolayers and their influence on the electronic structure and transport properties have been studied using the Density-Functional based Tight-Binding method in conjunction with the Green's Function approach. Intrinsic defects in MoS2 monolayers significantly affect their electronic properties. Even at low concentration they considerably alter the quantum conductan…
▽ More
Various types of defects in MoS2 monolayers and their influence on the electronic structure and transport properties have been studied using the Density-Functional based Tight-Binding method in conjunction with the Green's Function approach. Intrinsic defects in MoS2 monolayers significantly affect their electronic properties. Even at low concentration they considerably alter the quantum conductance. While the electron transport is practically isotropic in pristine MoS2, strong anisotropy is observed in the presence of defects. Localized mid-gap states are observed in semiconducting MoS2 that do not contribute to the conductivity but direction-dependent scatter the current, and that the conductivity is strongly reduced across line defects and selected grain boundary models.
△ Less
Submitted 12 December, 2013; v1 submitted 3 November, 2013;
originally announced November 2013.
-
Line Defects in Molybdenum Disulfide Layers
Authors:
Andrey N. Enyashin,
Maya Bar-Sadan,
Lothar Houben,
Gotthard Seifert
Abstract:
Layered molecular materials and especially MoS2 are already accepted as promising candidates for nanoelectronics. In contrast to the bulk material, the observed electron mobility in single-layer MoS2 is unexpectedly low. Here we reveal the occurrence of intrinsic defects in MoS2 layers, known as inversion domains, where the layer changes its direction through a line defect. The line defects are ob…
▽ More
Layered molecular materials and especially MoS2 are already accepted as promising candidates for nanoelectronics. In contrast to the bulk material, the observed electron mobility in single-layer MoS2 is unexpectedly low. Here we reveal the occurrence of intrinsic defects in MoS2 layers, known as inversion domains, where the layer changes its direction through a line defect. The line defects are observed experimentally by atomic resolution TEM. The structures were modeled and the stability and electronic properties of the defects were calculated using quantum-mechanical calculations based on the Density-Functional Tight-Binding method. The results of these calculations indicate the occurrence of new states within the band gap of the semiconducting MoS2. The most stable non-stoichiometric defect structures are observed experimentally, one of which contains metallic Mo-Mo bonds and another one bridging S atoms.
△ Less
Submitted 12 April, 2013;
originally announced April 2013.
-
2D titanium carbonitrides and their hydroxylated derivatives: Structural, electronic properties and stability of MXenes Ti3C2-xNx and Ti3C2-xNx(OH)2
Authors:
A. N. Enyashin,
A. L. Ivanovskii
Abstract:
3D titanium carbonitrides TiCxNy possess excellent physical, chemical, and mechanical properties, attractive for various industrial applications. Most recently, the uncommon nano-sized layers of 2D-like titanium carbonitrides were fabricated from MAX phases. Herein, the structural, electronic properties and stability of these new compounds as well as their hydroxylated derivatives - so-called MXen…
▽ More
3D titanium carbonitrides TiCxNy possess excellent physical, chemical, and mechanical properties, attractive for various industrial applications. Most recently, the uncommon nano-sized layers of 2D-like titanium carbonitrides were fabricated from MAX phases. Herein, the structural, electronic properties and stability of these new compounds as well as their hydroxylated derivatives - so-called MXenes Ti3C2-xNx and Ti3C2-xNx(OH)2 are probed by means of SSC-DFTB calculations. The genesis of the properties is discussed in the sequence: binary MXenes Ti3C2 (Ti3N2) -> their hydroxylated forms Ti3C2(OH)2 (Ti3N2(OH)2) -> pristine MXene Ti3C2-xNx -> hydroxylated Ti3C2-xNx(OH)2. Our results show that the examined materials are metallic-like. The most favorable type of OH-covering is presented by the occupation of the hollow sites between three neighboring carbon (nitrogen) atoms. The formation of 2D MXene carbonitrides with random distribution of C and N atoms was found to be thermodynamically more favorable.
△ Less
Submitted 9 April, 2013; v1 submitted 5 April, 2013;
originally announced April 2013.
-
Structural, electronic properties and stability of MXenes Ti2C and Ti3C2 functionalized by methoxy groups
Authors:
Andrey N. Enyashin,
Alexander L. Ivanovskii
Abstract:
The properties of MXenes, a new group of quasi-two-dimensional d-metal carbide or nitride nanomaterials derived by chemical exfoliation from the MAX phases, can be very sensitive to the presence of surface functional groups. Herein, the MXenes Ti2C and Ti3C2 functionalized by methoxy groups are considered by means of the density functional theory tight-binding method. Their structural, electronic…
▽ More
The properties of MXenes, a new group of quasi-two-dimensional d-metal carbide or nitride nanomaterials derived by chemical exfoliation from the MAX phases, can be very sensitive to the presence of surface functional groups. Herein, the MXenes Ti2C and Ti3C2 functionalized by methoxy groups are considered by means of the density functional theory tight-binding method. Their structural, electronic properties, and relative stability are discussed in comparison with related and experimentally fabricated hydroxy derivatives of MXenes.
△ Less
Submitted 8 April, 2013; v1 submitted 5 April, 2013;
originally announced April 2013.
-
Fluorographynes: Stability, Structural and Electronic Properties
Authors:
A. N. Enyashin,
A. L. Ivanovskii
Abstract:
The presence in the graphyne sheets of a variable amount of sp2/sp1 atoms, which can be transformed into sp3-like atoms by covalent binding with one or two fluorine atoms, respectively, allows one to assume the formation of fulorinated graphynes (fluorographynes) with variable F/C stoichiometry. Here, employing DFT band structure calculations, we examine a series of fluorographynes, and the trends…
▽ More
The presence in the graphyne sheets of a variable amount of sp2/sp1 atoms, which can be transformed into sp3-like atoms by covalent binding with one or two fluorine atoms, respectively, allows one to assume the formation of fulorinated graphynes (fluorographynes) with variable F/C stoichiometry. Here, employing DFT band structure calculations, we examine a series of fluorographynes, and the trends in their stability, structural and electronic properties have been discussed as depending on their stoichiometry: from C2F3 (F/C= 1.5) to C4F7 (F/C= 1.75).
△ Less
Submitted 27 August, 2012;
originally announced August 2012.
-
New route for stabilization of 1T-WS2 and MoS2 phases
Authors:
Andrey N. Enyashin,
Lena Yadgarov,
Lothar Houben,
Igor Popov,
Marc Weidenbach,
Reshef Tenne,
Maya Bar-Sadan,
Gotthard Seifert
Abstract:
The phenomenon of a partial 2H\rightarrow1T phase transition within multiwalled WS2 nanotubes under substitutional Rhenium doping is discovered by means of high-resolution transmission electron microscopy. Using density-functional calculations for the related MoS2 compound we consider a possible origin of this phase transition, which was known formerly only for WS2 and MoS2 intercalated by alkali…
▽ More
The phenomenon of a partial 2H\rightarrow1T phase transition within multiwalled WS2 nanotubes under substitutional Rhenium doping is discovered by means of high-resolution transmission electron microscopy. Using density-functional calculations for the related MoS2 compound we consider a possible origin of this phase transition, which was known formerly only for WS2 and MoS2 intercalated by alkali metals. An interplay between the stability of layered or nanotubular forms of 2H and 1T allotropes is found to be intimately related with their electronic structures and electro-donating ability of an impurity.
△ Less
Submitted 17 October, 2011;
originally announced October 2011.
-
Graphene allotropes: stability, structural and electronic properties from DF-TB calculations
Authors:
A. N. Enyashin,
A. L. Ivanovskii
Abstract:
Using the density-functional-based tight-binding method we performed a systematic comparative study of stability, structural and electronic properties for 12 various types of graphene allotropes, which are likely candidates for engineering of novel graphene-like materials.
Using the density-functional-based tight-binding method we performed a systematic comparative study of stability, structural and electronic properties for 12 various types of graphene allotropes, which are likely candidates for engineering of novel graphene-like materials.
△ Less
Submitted 7 December, 2010;
originally announced December 2010.
-
Atomic structure and electronic properties of nanotubes of layered iron-based superconductors
Authors:
I. R. Shein,
A. N. Enyashin,
A. L. Ivanovskii
Abstract:
The atomic models of nanotubes for layered FeSe, LiFeAs, SrFe2As2, and LnFeAsO - the parent phases of so-called 11, 111, 122, and 1111 groups of newly discovered family of iron-based high temperature superconductors are proposed. On example of SrFe2As2 the electronic properties of predicted nanotubes are examined and discussed in comparison with those for the corresponding single layer and the cry…
▽ More
The atomic models of nanotubes for layered FeSe, LiFeAs, SrFe2As2, and LnFeAsO - the parent phases of so-called 11, 111, 122, and 1111 groups of newly discovered family of iron-based high temperature superconductors are proposed. On example of SrFe2As2 the electronic properties of predicted nanotubes are examined and discussed in comparison with those for the corresponding single layer and the crystal.
△ Less
Submitted 13 October, 2010;
originally announced October 2010.
-
Modeling of Magnetic Properties of NiCl$_2$ Nanostripes, Nanotubes and Fullerenes
Authors:
Andrey N. Enyashin,
Alexander L. Ivanovskii
Abstract:
We show that the magnetic properties of antiferromagnetic layered NiCl$_{2}$ can be altered under nano-sizing depending on dimensionality and morphology type of the corresponding nano-forms. By means of Monte-Carlo simulations within classical Heisenberg model, the spin ordering, magnetic part of heat capacity C$_{v}$ and Néel temperatures T$_{N}$ for multi-walled NiCl$_{2}$ nanotubes and a fuller…
▽ More
We show that the magnetic properties of antiferromagnetic layered NiCl$_{2}$ can be altered under nano-sizing depending on dimensionality and morphology type of the corresponding nano-forms. By means of Monte-Carlo simulations within classical Heisenberg model, the spin ordering, magnetic part of heat capacity C$_{v}$ and Néel temperatures T$_{N}$ for multi-walled NiCl$_{2}$ nanotubes and a fullerene were calculated and analyzed in comparison with the bulk NiCl$_{2}$ and multilayered two-dimensional NiCl$_{2}$ crystals and nanostripes. We have found that the nano-structuring of NiCl$_{2}$ at the size reducing and at the formation of the closed structures can influence propitiously on the preservation of antiferromagnetic properties.
△ Less
Submitted 11 June, 2010;
originally announced June 2010.
-
Computer Modeling of Electronic Properties of Scroll-like V2O5-based Nanotubes
Authors:
A. N. Enyashin,
V. V. Ivanovskaya,
Yu. N. Makurin,
A. L. Ivanovskii
Abstract:
Atomic models of quasi-one-dimensional 1D vanadium oxide nanostructures - nanotubes of various morphology (cylinder or scroll-like) formed by rolling (010) single layers of V2O5 are constructed and their electronic properties are studied using the tight-binding band theory. Compared to the cylindrical zigzag (n,0) and armchair (n,n)-like nanotubes, which are uniformly semi-conducting with the ba…
▽ More
Atomic models of quasi-one-dimensional 1D vanadium oxide nanostructures - nanotubes of various morphology (cylinder or scroll-like) formed by rolling (010) single layers of V2O5 are constructed and their electronic properties are studied using the tight-binding band theory. Compared to the cylindrical zigzag (n,0) and armchair (n,n)-like nanotubes, which are uniformly semi-conducting with the bang gap of about 2.5-2.7 eV, the band gap of the scroll-like tubes trends significantly to vanish (up to about 0.1 eV) depending on the atomic configurations of the tubes and inter-wall distances.
△ Less
Submitted 8 September, 2003;
originally announced September 2003.
-
Electronic properties of NiCl$_2$ tubular nanostructures
Authors:
V. V. Ivanovskaya,
A. N. Enyashin,
N. I. Medvedeva,
A. L. Ivanovskii
Abstract:
Atomic models of zigzag (n, 0)- and armchair (n,n)-like NiCl2 nanotubes (n = 4 - 29) formed by rolling (100) single layers of the bulk NiCl2 which crystallizes in the CdCl2-type structure, are constructed and their electronic properties and bond indices are investigated using the tight-binding band theory. The calculations performed show that all the considered nanotubes in non-magnetic state ar…
▽ More
Atomic models of zigzag (n, 0)- and armchair (n,n)-like NiCl2 nanotubes (n = 4 - 29) formed by rolling (100) single layers of the bulk NiCl2 which crystallizes in the CdCl2-type structure, are constructed and their electronic properties and bond indices are investigated using the tight-binding band theory. The calculations performed show that all the considered nanotubes in non-magnetic state are uniformly metallic-like. The density of states at the Fermi level contains a considerable contribution from Ni3d states, its value depends on the atomic configuration and diameter of the tubes. The Ni-Cl covalent bonds were found in NiCl2 tubes, whereas Ni-Ni and Cl-Cl covalent interactions are almost absent. According our estimations, the zigzag (n, 0)-like NiCl2 nanotubes are more energetically favorable.
△ Less
Submitted 10 April, 2003;
originally announced April 2003.
-
Electronic Properties of TiO$_2$ Nanotubes
Authors:
V. V. Ivanovskaya,
A. N. Enyashin,
N. I. Medvedeva,
A. L. Ivanovskii
Abstract:
quasi-one-dimensional (1D) titania nanostructures - single-walled nanotubes formed by rolling [101] planes of TiO$_2$ (anatase phase) are modeled and their electronic properties and bond orders indices are studied using the tight-binding band theory. We show that all zigzag (n,0)- and armchair (n,n)-like nanotubes are uniformly semiconducting, and the band gap trends to vanish as the tube diamet…
▽ More
quasi-one-dimensional (1D) titania nanostructures - single-walled nanotubes formed by rolling [101] planes of TiO$_2$ (anatase phase) are modeled and their electronic properties and bond orders indices are studied using the tight-binding band theory. We show that all zigzag (n,0)- and armchair (n,n)-like nanotubes are uniformly semiconducting, and the band gap trends to vanish as the tube diameters decrease. It was established that the zigzag (n,0) nanotubes configurations are more likely to form when the diameters are larger 1 nm. The Ti-O covalent bonds were found to be the strongest interactions in TiO$_2$ tubes, whereas Ti-Ti bonds proved to be much weaker.
△ Less
Submitted 20 November, 2002;
originally announced November 2002.
