-
Significance of Strain Rate in Severe Plastic Deformation on Steady-State Microstructure and Strength
Authors:
Kaveh Edalati,
Qing Wang,
Nariman A. Enikeev,
Laura-Jean Peters,
Michael J. Zehetbauer,
Erhard Schafler
Abstract:
The microstructure and mechanical properties of materials saturate to steady states after severe plastic deformation (SPD). Despite the well-known effect of temperature on the steady-state microstructure, there is no general agreement on the significance of strain rate and the applicability of the Zener-Hollomon parameter in this regard. In this study, several pure metals (aluminum, copper, titani…
▽ More
The microstructure and mechanical properties of materials saturate to steady states after severe plastic deformation (SPD). Despite the well-known effect of temperature on the steady-state microstructure, there is no general agreement on the significance of strain rate and the applicability of the Zener-Hollomon parameter in this regard. In this study, several pure metals (aluminum, copper, titanium, and iron) and a Cu-30Zn (wt%) brass alloy have been processed by a high-speed high-pressure torsion (HPT) equipment with controllable rotation speeds in the range of 0.06 to 60 rpm. It is found that crystallite/grain size, dislocation density, microhardness and shear stress at the steady state are reasonably rate-independent for the von Mises strain rates in the range of 0.004 to 20 s-1. Because both rates of grain refinement and of dynamic recrystallization are proportional to the strain rate, it is suggested that their balance, which determines the steady state, is rate-independent.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Plasticity of an extra-strong nanocrystalline stainless steel controlled by the "dislocation-segregation'' interaction
Authors:
N. A. Enikeev,
I. V. Lomakin,
M. M. Abramova,
A. M. Mavlyutov,
A. A. Lukyanchuk,
A. S. Shutov,
X. Sauvage
Abstract:
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows maintaining extraordinarily high strength and remarkably enhanced plasticity. Underlying mechanisms featuring interaction between the segregations and mobile dislocat…
▽ More
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows maintaining extraordinarily high strength and remarkably enhanced plasticity. Underlying mechanisms featuring interaction between the segregations and mobile dislocations are discussed.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Ab initio based analysis of grain boundary segregation in Al-Mg and Al-Zn binary alloys
Authors:
M. V. Petrik,
A. R. Kuznetsov,
N. Enikeev,
Yu. N. Gornostyrev,
R. Z. Valiev
Abstract:
Based on ab-initio simulations, we report on the nature of principally different mechanisms for interaction of Mg and Zn atoms with grain boundaries in Al alloys leading to different morphology of segregation. The Mg atoms segregate in relatively wide GB region with heterogeneous agglomerations due to the deformation mechanism of solute-GB interaction. In contrast, in the case of Zn atoms an elect…
▽ More
Based on ab-initio simulations, we report on the nature of principally different mechanisms for interaction of Mg and Zn atoms with grain boundaries in Al alloys leading to different morphology of segregation. The Mg atoms segregate in relatively wide GB region with heterogeneous agglomerations due to the deformation mechanism of solute-GB interaction. In contrast, in the case of Zn atoms an electronic mechanism associated with the formation of directional bonding is dominating in the solute-GB interaction. As a result, for Zn atoms it is energetically beneficial to occupy interstitial positions at the very GB and to be arranged into thin layers along the GBs. The results obtained show the essential role of elements chemistry in segregation formation and explain the qualitative features in morphology of GB segregation observed in Al-Mg and Al-Zn alloys with ultrafine grains.
△ Less
Submitted 1 August, 2017;
originally announced August 2017.
-
Grain boundary segregation in UFG alloys processed by severe plastic deformation
Authors:
Xavier Sauvage,
Artur Ganeev,
Yulia Ivanisenko,
Nariman Enikeev,
Maxim Murashkin,
R. Z. Valiev
Abstract:
Grain boundary segregations were investigated by Atom Probe Tomography in an Al-Mg alloy, a carbon steel and Armco\trademark Fe processed by severe plastic deformation (SPD). In the non-deformed state, the GBs of the aluminium alloy are Mg depleted, but after SPD some local enrichment up to 20 at.% was detected. In the Fe-based alloys, large carbon concentrations were also exhibited along GBs afte…
▽ More
Grain boundary segregations were investigated by Atom Probe Tomography in an Al-Mg alloy, a carbon steel and Armco\trademark Fe processed by severe plastic deformation (SPD). In the non-deformed state, the GBs of the aluminium alloy are Mg depleted, but after SPD some local enrichment up to 20 at.% was detected. In the Fe-based alloys, large carbon concentrations were also exhibited along GBs after SPD. These experimental observations are attributed to the specific structure of GBs often described as "non-equilibrum" in ultra fine grained materials processed by SPD. The grain boundary segregation mechanisms are discussed and compared in the case of substitutional (Mg in fcc Al) and interstitial (C in bcc Fe) solute atoms.
△ Less
Submitted 21 November, 2012;
originally announced November 2012.
-
On the origin of extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation
Authors:
Ruslan Valiev,
Nariman Enikeev,
Maxim Murashkin,
V. Kazykhanov,
Xavier Sauvage
Abstract:
Ultrafine-grained Al alloys produced by high pressure torsion are found to exhibit a very high strength, considerably exceeding the Hall-Petch predictions for the ultrafine grains. The phenomena can be attributed to the unique combination of ultrafine structure and deformation-induced segregations of solute elements along grain boundaries, which may affect the emission and mobility of intragranula…
▽ More
Ultrafine-grained Al alloys produced by high pressure torsion are found to exhibit a very high strength, considerably exceeding the Hall-Petch predictions for the ultrafine grains. The phenomena can be attributed to the unique combination of ultrafine structure and deformation-induced segregations of solute elements along grain boundaries, which may affect the emission and mobility of intragranular dislocations.
△ Less
Submitted 22 October, 2010;
originally announced October 2010.
