-
Effects of dislocation filtering layers on optical properties of third telecom window emitting InAs/InGaAlAs quantum dots grown on silicon substrates
Authors:
Wojciech Rudno-Rudziński,
Michał Gawełczyk,
Paweł Podemski,
Ramasubramanian Balasubramanian,
Vitalii Sichkovskyi,
Amnon J. Willinger,
Gadi Eisenstein,
Johann P. Reithmaier,
Grzegorz Sęk
Abstract:
Integrating light emitters based on III-V materials with silicon-based electronics is crucial for further increase in data transfer rates in communication systems since the indirect bandgap of silicon prevents its direct use as a light source. We investigate here InAs/InGaAlAs quantum dot (QD) structures grown directly on 5° off-cut Si substrate and emitting light at 1.5 micrometers, compatible wi…
▽ More
Integrating light emitters based on III-V materials with silicon-based electronics is crucial for further increase in data transfer rates in communication systems since the indirect bandgap of silicon prevents its direct use as a light source. We investigate here InAs/InGaAlAs quantum dot (QD) structures grown directly on 5° off-cut Si substrate and emitting light at 1.5 micrometers, compatible with established telecom platform. Using different dislocation defects filtering layers, exploiting strained superlattices and supplementary QD layers, we mitigate the effects of lattice constant and thermal expansion mismatches between III-V materials and Si during growth. Complementary optical spectroscopy techniques, i.e. photoreflectance and temperature-, time- and polarization- resolved photoluminescence, allow us to determine the optical quality and application potential of the obtained structures by comparing them to a reference sample -- state-of-the-art QDs grown on InP. Experimental findings are supported by calculations of excitonic states and optical transitions by combining multiband k.p and configuration-interaction methods. We show that our design of structures prevents the generation of a considerable density of defects, as intended. The emission of Si-based structures appears to be much broader than for the reference dots, due to the creation of different QD populations which might be a disadvantage in particular laser applications, however, could be favourable for others, e.g. in broadly tunable devices, sensors, or optical amplifiers. Eventually, we identify the overall most promising combination of defect filtering layers, discuss its advantages and limitations, and prospects for further improvements.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Strategies for the alignment of electronic states in quantum-dot tunnel-injection lasers and their influence on the emission dynamics
Authors:
Michael Lorke,
Igor Khanonkin,
Stephan Michael,
Johann Peter Reithmaier,
Gadi Eisenstein,
Frank Jahnke
Abstract:
In quantum-dot tunnel-injection lasers, the excited charge carriers are efficiently captured from the bulk states via an injector quantum well and then transferred into the quantum dots via a tunnel barrier. The alignment of the electronic levels is crucial for the high efficiency of these processes and especially for the fast modulation dynamics of these lasers. In particular, the quantum mechani…
▽ More
In quantum-dot tunnel-injection lasers, the excited charge carriers are efficiently captured from the bulk states via an injector quantum well and then transferred into the quantum dots via a tunnel barrier. The alignment of the electronic levels is crucial for the high efficiency of these processes and especially for the fast modulation dynamics of these lasers. In particular, the quantum mechanical nature of the tunneling process must be taken into account in the transition from two-dimensional quantum well states to zero-dimensional quantum dot states. This results in hybrid states, from which the scattering into the quantum-dot ground states takes place. We combine electronic state calculations of the tunnel-injection structures with many-body calculations of the scattering processes and insert this into a complete laser simulator. This allows us to study the influence of the structural design and the resulting electronic states as well as limitations due to inhomogeneous quantum-dot distributions. We find that the optimal electronic state alignment deviates from a simple picture in which the of the quantum-dot ground state energies are one LO-phonon energy below the injector quantum well ground state.
△ Less
Submitted 19 November, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
Carrier dynamics in quantum-dot tunnel-injection structures: microscopic theory and experiment
Authors:
Michael Lorke,
Igor Khanonkin,
Stephan Michael,
Johann Peter Reithmaier,
Gadi Eisenstein,
Frank Jahnke
Abstract:
Tunneling-injection structures are incorporated in semiconductor lasers in order to overcome the fundamental dynamical limitation due to hot carrier injection by providing a carrier transport path from a cold carrier reservoir. The tunneling process itself depends on band alignment between quantum-dot levels and the injector quantum well, especially as in these devices LO-phonon scattering is domi…
▽ More
Tunneling-injection structures are incorporated in semiconductor lasers in order to overcome the fundamental dynamical limitation due to hot carrier injection by providing a carrier transport path from a cold carrier reservoir. The tunneling process itself depends on band alignment between quantum-dot levels and the injector quantum well, especially as in these devices LO-phonon scattering is dominant. Quantum dots with their first excited state near the quantum well bottom profit most from tunnel coupling. As inhomogeneous broadening is omnipresent in quantum dot structures, this implies that individual members of the ensemble couple differently to the injector quantum well. Quantum dots with higher energy profit less, as the phonon couples to higher, less occupied states. Likewise, if the energy difference between ground state and quantum well exceeds the LO phonon energy, scattering becomes increasingly inefficient. Therefore, within 20-30meV we find Quantum Dots that benefit substantially different from the tunnel coupling. Furthermore, in quantum dots with increasing confinement depth, excited states become sucessively confined. Here, scattering gets more efficient again, as subsequent excited states reach the phonon resonance with the quantum well bottom. Our results provide guidelines for the optimization of tunnel-injection lasers. Theoretical results for electronic state caluluations in connection with carrier-phonon and carrier-carrier scattering are compared to experimental results of the temporal gain recovery after a short pulse perturbation.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
On the carrier transport and radiative recombination mechanisms in tunneling injection quantum dot lasers
Authors:
V. Mikhelashvili,
S. Bauer,
I. Khanonkin,
O. Eyal,
G. Seri,
L. Gal,
J. P. Reithmaier,
G. Eisenstein
Abstract:
We report temperature-dependent current-voltage (I - V - T) and output light power-voltage or current (P - V - T) or (P - I - T) characteristics of 1550 nm tunneling injection quantum dot (TI QD) laser diodes. Experimental data is accompanied by physical models that distinguish between different current flow and light emission mechanisms for different applied voltages and temperature ranges. Three…
▽ More
We report temperature-dependent current-voltage (I - V - T) and output light power-voltage or current (P - V - T) or (P - I - T) characteristics of 1550 nm tunneling injection quantum dot (TI QD) laser diodes. Experimental data is accompanied by physical models that distinguish between different current flow and light emission mechanisms for different applied voltages and temperature ranges. Three exponential regimes in the I - V characteristics were identified for low bias levels where no optical radiation takes place. At the lowest bias levels, the diffusion-recombination mechanism based on the classical Shockley-Reid-Hall theory dominates. This is followed, at low and near room temperature, by a combination of weak tunneling and generation-recombination, respectively. In the third exponential region, for all temperatures carrier transport is dictated by strong tunneling, which is characterized by a temperature-independent slope of the I - V curves and a variable ideality factor. The I - V results were compared to a conventional QD laser in which the current flow mechanisms of the first and third types are absent, which clearly demonstrates the key role played by the TI layer.
In the post-exponential voltage range, when the diodes are in the high injection regime, the characteristics of the two types of diodes are identical. The typical behavior at the threshold current, where the output power increases fast has a clear signature in the I - V characteristics. Finally, an analytical quantitative relationship is established between the light output power and the applied voltage and current as well as the carrier density participating in radiative recombination.
△ Less
Submitted 14 August, 2021;
originally announced August 2021.
-
Carrier Dynamics in a Tunneling Injection Quantum Dot Semiconductor Optical Amplifier
Authors:
I. Khanonkin,
M. Lorke,
S. Michael,
A. K. Mishra,
J. P. Reithmaier,
F. Jahnke,
G. Eisenstein
Abstract:
The process of tunneling injection is known to improve the dynamical characteristics of quantum well and quantum dot lasers; in the latter, it also improves the temperature performance. The advantage of the tunneling injection process stems from the fact that it avoids hot carrier injection, which is a key performance-limiting factor in all semiconductor lasers. The tunneling injection process is…
▽ More
The process of tunneling injection is known to improve the dynamical characteristics of quantum well and quantum dot lasers; in the latter, it also improves the temperature performance. The advantage of the tunneling injection process stems from the fact that it avoids hot carrier injection, which is a key performance-limiting factor in all semiconductor lasers. The tunneling injection process is not fully understood microscopically and therefore it is difficult to optimize those laser structures. We present here a numerical study of the broad band carrier dynamics in a tunneling injection quantum dot gain medium in the form of an optical amplifier operating at 1.55 um. Charge carrier tunneling occurs in a hybrid state that joins the quantum dot first excited state and the confined quantum well - injection well states. The hybrid state, which is placed energetically roughly one LO phonon above the ground state and has a spectral extent of about 5 meV , dominates the carrier injection to the ground state. We calculate the dynamical response of the inversion across the entire gain spectrum following a short pulse perturbation at various wavelengths and for two bias currents. At a high bias of 200 mA, the entire spectrum exhibits gain; at 30 mA, the system exhibits a mixed gain - absorption spectrum. The carrier dynamics in the injection well is calculated simultaneously. We discuss the role of the pulse excitation wavelengths relative to the gain spectrum peak and demonstrate that the injection well responds to all perturbation wavelengths, even those which are far from the region where the tunneling injection process dominates.
△ Less
Submitted 22 July, 2018;
originally announced July 2018.
-
Nonlinear pulse propagation in InAs/InP quantum-dot optical amplifiers: Rabi-oscillations in the presence of non-resonant nonlinearities
Authors:
Ouri Karni,
Akilesh Kumar Mishra,
Gad Eisenstein,
Johann Peter Reithmaier
Abstract:
We study the interplay between coherent light-matter interactions and non-resonant pulse propagation effects when ultra-short pulses propagate in room-temperature quantum-dot (QD) semiconductor optical amplifiers (SOAs). The signatures observed on a pulse envelope after propagating in a transparent SOA, when coherent Rabi-oscillations are absent, highlight the contribution of two-photon absorption…
▽ More
We study the interplay between coherent light-matter interactions and non-resonant pulse propagation effects when ultra-short pulses propagate in room-temperature quantum-dot (QD) semiconductor optical amplifiers (SOAs). The signatures observed on a pulse envelope after propagating in a transparent SOA, when coherent Rabi-oscillations are absent, highlight the contribution of two-photon absorption (TPA), and its accompanying Kerr-like effect, as well as of linear dispersion, to the modification of the pulse complex electric field profile. These effects are incorporated into our previously developed finite-difference time-domain comprehensive model that describes the interaction between the pulses and the QD SOA. The present, generalized, model is used to investigate the combined effect of coherent and non-resonant phenomena in the gain and absorption regimes of the QD SOA. It confirms that in the QD SOA we examined, linear dispersion in the presence of the Kerr-like effect causes pulse compression, which counteracts the pulse peak suppression due to TPA, and also modifies the patterns which the coherent Rabi-oscillations imprint on the pulse envelope under both gain and absorption conditions. The inclusion of these effects leads to a better fit with experiments and to a better understanding of the interplay among the various mechanisms so as to be able to better analyze more complex future experiments of coherent light-matter interaction induced by short pulses propagating along an SOA.
△ Less
Submitted 21 September, 2014;
originally announced September 2014.
-
Electron wavefunction probing in room-temperature semiconductors: direct observation of Rabi oscillations and self-induced transparency
Authors:
Amir Capua,
Ouri Karni,
Gadi Eisenstein,
Johann Peter Reithmaier
Abstract:
Quantum coherent light-matter interactions have been at the forefront of scientific interest since the fundamental predictions of Einstein and the later work of Rabi. Direct observation of quantum coherent interactions entails probing the electronic wavefunction which requires that the electronic state of the matter does not de-phase during the measurement, a condition that can be satisfied by len…
▽ More
Quantum coherent light-matter interactions have been at the forefront of scientific interest since the fundamental predictions of Einstein and the later work of Rabi. Direct observation of quantum coherent interactions entails probing the electronic wavefunction which requires that the electronic state of the matter does not de-phase during the measurement, a condition that can be satisfied by lengthening the coherence time or by shortening the observation time. The short de-phasing time in semiconductors has dictated that all coherent effects reported to date have been recorded directly only at cryogenic temperatures. Here we report on the first direct electronic wavefunction probing in a room-temperature semiconductor. Employing an ultrafast characterization scheme we have demonstrated Rabi oscillations and self-induced transparency in an electrically driven, room-temperature semiconductor laser amplifier, revealing the most intimate details of the light-matter interactions seen to date. The ability to employ quantum effects in solid-state media, which operate at elevated temperatures, will finally bring true quantum mechanical concepts into the realm of practical devices.
△ Less
Submitted 25 October, 2012;
originally announced October 2012.