-
The Origin of Enhanced Conductivity and Structure Change in Defective Li4Ti5O12 or Blue-LTO : a study combined theoretical and experimental perspectives
Authors:
Yute Chan,
Cristina Grosu,
Matthias Kick,
Peter Jakes,
Stefan Seidlmayer,
Thomas Gigl,
Werner Egger,
Ruediger-A. Eichel,
Josef Granwehr,
Christoph Hugenschmidt,
Christoph Scheurer
Abstract:
The spinel Li4Ti5O12 (LTO) has emerged as a promising anode material for the next generation of all-solid-state Li-ion batteries (ASSB), primarily due to its characteristic "zero strain" charge/discharge behavior and exceptional cycling stability, which significantly prolongs battery lifespan. Pristine LTO, however, is hindered by poor ionic and electronic conductivity. By employing tailored sinte…
▽ More
The spinel Li4Ti5O12 (LTO) has emerged as a promising anode material for the next generation of all-solid-state Li-ion batteries (ASSB), primarily due to its characteristic "zero strain" charge/discharge behavior and exceptional cycling stability, which significantly prolongs battery lifespan. Pristine LTO, however, is hindered by poor ionic and electronic conductivity. By employing tailored sintering protocols that create oxygen vacancies, a high-performing, blue LTO material is achieved. It has been proposed that the increased electronic conductivity could stem from vacancy-induced polarons. Yet, detailed insights into polaron stability, distribution, and dynamics within both the LTO bulk and surface have remained elusive due to limited information on structural changes. Utilizing Positron Annihilation Lifetime Spectroscopy (PALS) and Coincidence Doppler Broadening Spectroscopy (CDBS), in conjunction with Two Component Density Functional Theory (TCDFT) with the on-site Hubbard U correction, enables us to probe the depth profile of defect species introduced by sintering in a reductive environment. Our research provides direct evidence of oxygen vacancy formation within the subsurface region, an inference drawn from the observation of \ch{Ti^{3+}}. Our investigation into Li16d vacancy formation within the bulk region uncovers the interactions between mobile species, namely Li-ions and polarons. Furthermore, we delve into the polaron stability on the LTO surface, offering an explanation for the superior performance of the (100) facet exposed LTO nanoparticle, as compared to its (111) exposed counterpart.
△ Less
Submitted 3 October, 2024;
originally announced October 2024.
-
Revisiting the storage capacity limit of graphite battery anodes: spontaneous lithium overintercalation at ambient pressure
Authors:
Cristina Grosu,
Chiara Panosetti,
Steffen Merz,
Peter Jakes,
Sebastian Matera,
Rüdiger-A. Eichel,
Josef Granwehr,
Christoph Scheurer
Abstract:
The market quest for fast-charging, safe, long-lasting and performant batteries drives the exploration of new energy storage materials, but also promotes fundamental investigations of materials already widely used. Presently, revamped interest in anode materials is observed -- primarily graphite electrodes for lithium-ion batteries. Here, we focus on the upper limit of lithium intercalation in the…
▽ More
The market quest for fast-charging, safe, long-lasting and performant batteries drives the exploration of new energy storage materials, but also promotes fundamental investigations of materials already widely used. Presently, revamped interest in anode materials is observed -- primarily graphite electrodes for lithium-ion batteries. Here, we focus on the upper limit of lithium intercalation in the morphologically quasi-ideal highly oriented pyrolytic graphite (HOPG), with a LiC$_6$ stoichiometry corresponding to 100\% state of charge (SOC). We prepared a sample by immersion in liquid lithium at ambient pressure and investigated it by static $^7$Li nuclear magnetic resonance (NMR). We resolved unexpected signatures of superdense intercalation compounds, LiC$_{6-x}$. These have been ruled out for decades, since the highest geometrically accessible composition, LiC$_2$, can only be prepared under high pressure. We thus challenge the widespread notion that any additional intercalation beyond LiC$_6$ is not possible under ambient conditions. We monitored the sample upon calendaric aging and employed ab initio calculations to rationalise the NMR results. The computed relative stabilities of different superdense configurations reveal that non-negligible overintercalation does proceed spontaneously beyond the currently accepted capacity limit.
△ Less
Submitted 12 November, 2021; v1 submitted 23 July, 2021;
originally announced July 2021.
-
Defects and Phase Formation in Non-Stoichiometric LaFeO$_3$: a Combined Theoretical and Experimental Study
Authors:
Daniel Mutter,
Roland Schierholz,
Daniel F. Urban,
Sabrina A. Heuer,
Thorsten Ohlerth,
Hans Kungl,
Christian Elsässer,
Rüdiger-A. Eichel
Abstract:
The defect chemistry of perovskite compounds is directly related to the stoichiometry and to the valence states of the transition-metal ions. Defect engineering has become increasingly popular as it offers the possibility to influence the catalytic properties of perovskites for applications in energy storage and conversion devices such as solid-oxide fuel- and electrolyzer cells. LaFeO$_3$ (LFO) c…
▽ More
The defect chemistry of perovskite compounds is directly related to the stoichiometry and to the valence states of the transition-metal ions. Defect engineering has become increasingly popular as it offers the possibility to influence the catalytic properties of perovskites for applications in energy storage and conversion devices such as solid-oxide fuel- and electrolyzer cells. LaFeO$_3$ (LFO) can be regarded as a base compound of the family of catalytically active perovskites La$_{1-x}$A$_x$Fe$_{1-y}$B$_y$O$_{3-δ}$, for which the defect chemistry as well as the electronic and ionic conductivity can be tuned by substitution on cationic sites. Combining theoretical and experimental approaches, we explore the suitability for A-site vacancy engineering, namely the feasibility of actively manipulating the valence state of Fe and the concentration of point defects by synthesizing La-deficient LFO. Formation energies and concentrations of point defects were determined as a function of processing conditions by first-principles DFT+U calculations. Based on the results, significant compositional deviations from stoichiometric LFO cannot be expected by providing rich or poor conditions of the oxidic precursor compounds (Fe$_2$O$_3$ and La$_2$O$_3$) in a solid-state processing route. In the experimental part, LFO was synthesized with a targeted La-site deficiency. We analyze the resulting phases by X-ray diffraction and scanning electron microscopy, (scanning) transmission electron microscopy in combination with energy-dispersive X-ray spectroscopy, and electron energy-loss spectrometry. Instead of a variation of the La/Fe ratio, a mixture of the two phases Fe$_2$O$_3$ and LFO was observed, resulting in an invariant charge state of Fe, in line with the theoretical results. We discuss our findings with respect to partly differing assumptions made in previous studies on this material system.
△ Less
Submitted 17 December, 2021; v1 submitted 17 June, 2021;
originally announced June 2021.
-
Association of oxygen vacancies with impurity metal ions in lead titanate
Authors:
Paul Erhart,
Rüdiger-Albert Eichel,
Petra Träskelin,
Karsten Albe
Abstract:
Thermodynamic, structural and electronic properties of isolated copper and iron atoms as well as their complexes with oxygen vacancies in tetragonal lead titanate are investigated by means of first principles calculations. Both dopants exhibit a strong chemical driving force for the formation of M_Ti-V_O (M = Cu, Fe) defect associates. The most stable configurations corresponds to a local dipole a…
▽ More
Thermodynamic, structural and electronic properties of isolated copper and iron atoms as well as their complexes with oxygen vacancies in tetragonal lead titanate are investigated by means of first principles calculations. Both dopants exhibit a strong chemical driving force for the formation of M_Ti-V_O (M = Cu, Fe) defect associates. The most stable configurations corresponds to a local dipole aligned along the tetragonal axis parallel to the spontaneous polarization. Local spin moments are obtained and the calculated spin densities are discussed. The calculations provide a simple and consistent explanation for the experimental findings. The results are discussed in the context of models for degradation of ferroelectric materials.
△ Less
Submitted 2 September, 2010;
originally announced September 2010.
-
The nature of iron-oxygen vacancy defect centers in PbTiO3
Authors:
H. Mestric,
R. -A. Eichel,
T. Kloss,
K. -P. Dinse,
So. Laubach,
St. Laubach,
P. C. Schmidt,
K. A. Schoenau,
M. Knapp,
H. Ehrenberg
Abstract:
The iron(III) center in ferroelectric PbTiO3 together with an oxygen vacancy forms a charged defect associate, oriented along the crystallographic c-axis. Its microscopic structure has been analyzed in detail comparing results from a semi-empirical Newman superposition model analysis based on finestructure data and from calculations using density functional theory.
Both methods give evidence f…
▽ More
The iron(III) center in ferroelectric PbTiO3 together with an oxygen vacancy forms a charged defect associate, oriented along the crystallographic c-axis. Its microscopic structure has been analyzed in detail comparing results from a semi-empirical Newman superposition model analysis based on finestructure data and from calculations using density functional theory.
Both methods give evidence for a substitution of Fe3+ for Ti4+ as an acceptor center. The position of the iron ion in the ferroelectric phase is found to be similar to the B-site in the paraelectric phase. Partial charge compensation is locally provided by a directly coordinated oxygen vacancy.
Using high-resolution synchrotron powder diffraction, it was verified that lead titanate remains tetragonal down to 12 K, exhibiting a c/a-ratio of 1.0721.
△ Less
Submitted 27 April, 2005;
originally announced April 2005.
-
High-frequency electron paramagnetic resonance investigation of the Fe3+ impurity center in polycrystalline PbTiO3 in its ferroelectric phase
Authors:
Hrvoje Mestric,
Ruediger-A. Eichel,
Klaus-P. Dinse,
Andrew Ozarowski,
Johan van Tol,
Louis Claude Brunel
Abstract:
The intrinsic iron(III) impurity center in polycrystalline lead titanate was investigated by means of high-frequency electron paramagnetic resonance (EPR) spectroscopy in order to determine the local-environment sensitive fine structure parameter D. At a spectrometer frequency of 190 GHz, spectral analysis of a powder sample was unambiguously possible. The observed mean value D = +35.28 GHz can…
▽ More
The intrinsic iron(III) impurity center in polycrystalline lead titanate was investigated by means of high-frequency electron paramagnetic resonance (EPR) spectroscopy in order to determine the local-environment sensitive fine structure parameter D. At a spectrometer frequency of 190 GHz, spectral analysis of a powder sample was unambiguously possible. The observed mean value D = +35.28 GHz can be rationalized if Fe3+ ions substitute for Ti4+ at the B-site of the perovskite ABO3 lattice forming a directly coordinated iron - oxygen vacancy defect associate. A consistent fit of the multi-frequency data necessitated use of a distribution of D values with a variance of about 1 GHz. This statistical distribution of values is probably related to more distant defects and vacancies.
△ Less
Submitted 8 November, 2004;
originally announced November 2004.
