Showing 1–8 of 8 results for author: Eggeler, G

Modified Z-Phase Formation in a 12% Cr Tempered Martensite Ferritic Steel during Long-Term Creep

Authors: Johan Ewald Westraadt, William Edward Goosen, Aleksander Kostka, Hongcai Wang, Gunther Eggeler

Abstract: The formation of modified Z-phase in a 12Cr1MoV (German grade: X20) tempered martensite ferritic (TMF) steel subjected to interrupted long-term creep-testing at 550$^{\circ}$C and 120 MPa was investigated. Quantitative volumetric measurements collected from thin-foil and extraction replica samples showed that modified Z-phase precipitated in both the uniformly-elongated gauge ($f_v$: 0.23 $\pm$ 0.… ▽ More The formation of modified Z-phase in a 12Cr1MoV (German grade: X20) tempered martensite ferritic (TMF) steel subjected to interrupted long-term creep-testing at 550$^{\circ}$C and 120 MPa was investigated. Quantitative volumetric measurements collected from thin-foil and extraction replica samples showed that modified Z-phase precipitated in both the uniformly-elongated gauge ($f_v$: 0.23 $\pm$ 0.02 %) and thread regions ($f_v$: 0.06 $\pm$ 0.01 %) of the sample that ruptured after 139 kh. The formation of modified Z-phase was accompanied by a progressive dissolution of MX precipitates, which decreased from ($f_v$: 0.16 $\pm$ 0.02 %) for the initial state to ($f_v$: 0.03 $\pm$ 0.01 %) in the uniformly-elongated gauge section of the sample tested to failure. The interparticle spacing of the creep-strengthening MX particles increased from ($λ_{3D}$: 0.55 $\pm$ 0.05 $μm$) in the initial state to ($λ_{3D}$: 1.01 $\pm$ 0.10 $μm$) for the uniformly-elongated gauge section of the ruptured sample, while the thread region had an interparticle spacing of ($λ_{3D}$: 0.60 $\pm$ 0.05 $μm$). The locally deformed fracture region had an increased phase fraction of modified Z-phase ($f_v$: 0.40 $\pm$ 0.20 %), which implies that localised creep-strain strongly promotes the formation of modified Z-phase. The modified Z-phase precipitates did not form only on prior-austenite grain boundaries and formed throughout the tempered martensite ferritic grain structure. △ Less

Submitted 30 June, 2022; originally announced June 2022.

Comments: 11 pages, 9 figures

Discovery of $ω$-free high-temperature Ti-Ta-X shape memory alloys from first principles calculations

Authors: Alberto Ferrari, Alexander Paulsen, Dennis Langenkämper, David Piorunek, Christoph Somsen, Jan Frenzel, Jutta Rogal, Gunther Eggeler, Ralf Drautz

Abstract: The rapid degradation of the functional properties of many Ti-based alloys is due to the precipitation of the $ω$ phase. In the conventional high-temperature shape memory alloy Ti-Ta the formation of this phase compromises completely the shape memory effect and high (>100°C) transformation temperatures cannot be mantained during cycling. A solution to this problem is the addition of other elements… ▽ More The rapid degradation of the functional properties of many Ti-based alloys is due to the precipitation of the $ω$ phase. In the conventional high-temperature shape memory alloy Ti-Ta the formation of this phase compromises completely the shape memory effect and high (>100°C) transformation temperatures cannot be mantained during cycling. A solution to this problem is the addition of other elements to form Ti-Ta-X alloys, which often modifies the transformation temperatures; due to the largely unexplored space of possible compositions, very few elements are known to stabilize the shape memory effect without decreasing the transformation temperatures below 100°C. In this study we use transparent descriptors derived from first principles calculations to search for new ternary Ti-Ta-X alloys that combine stability and high temperatures. We suggest four new alloys with these properties, namely Ti-Ta-Sb, Ti-Ta-Bi, Ti-Ta-In, and Ti-Ta-Sc. Our predictions for the most promising of these alloys, Ti-Ta-Sc, are subsequently fully validated by experimental investigations, the new alloy Ti-Ta-Sc showing no traces of $ω$ phase after cycling. Our computational strategy is immediately transferable to other materials and may contribute to suppress $ω$ phase formation in a large class of alloys. △ Less

Submitted 1 August, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Journal ref: Phys. Rev. Materials 3, 103605 (2019)

On the segregation of Re at dislocations in the γ' phase of Ni-based single crystal superalloys

Authors: Xiaoxiang Wu, Surendra Kumar Makineni, Paraskevas Kontis, Gerhard Dehm, Dierk Raabe, Baptiste Gault, Gunther Eggeler

Abstract: We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of γ' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at 750°C under an applied stress of 800 MPa. The observed segregation effects can be rationalized through bridging the solute partitioning behavior across the γ/γ' interface and… ▽ More We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of γ' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at 750°C under an applied stress of 800 MPa. The observed segregation effects can be rationalized through bridging the solute partitioning behavior across the γ/γ' interface and the pipe diffusion mechanism along the core of the dislocation line. This understanding can provide new insights enabling improved alloy design. △ Less

Submitted 24 September, 2018; originally announced September 2018.

Unusual composition dependence of transformation temperatures in Ti-Ta-X shape memory alloys

Authors: Alberto Ferrari, Alexander Paulsen, Jan Frenzel, Jutta Rogal, Gunther Eggeler, Ralf Drautz

Abstract: Ti-Ta-X (X = Al, Sn, Zr) compounds are emerging candidates as high-temperature shape memory alloys (HTSMAs). The stability of the one-way shape memory effect (1WE), the exploitable pseudoelastic (PE) strain intervals as well as the transformation temperature in these alloys depend strongly on composition, resulting in a trade-off between a stable shape memory effect and a high transformation tempe… ▽ More Ti-Ta-X (X = Al, Sn, Zr) compounds are emerging candidates as high-temperature shape memory alloys (HTSMAs). The stability of the one-way shape memory effect (1WE), the exploitable pseudoelastic (PE) strain intervals as well as the transformation temperature in these alloys depend strongly on composition, resulting in a trade-off between a stable shape memory effect and a high transformation temperature. In this work, experimental measurements and first-principles calculations are combined to rationalize the effect of alloying a third component to Ti-Ta based HTSMAs. Most notably, an $\textit{increase}$ in the transformation temperature with increasing Al content is detected experimentally in Ti-Ta-Al for low Ta concentrations, in contrast to the generally observed dependence of the transformation temperature on composition in Ti-Ta-X. This inversion of trend is confirmed by the $\textit{ab-initio}$ calculations. Furthermore, a simple analytical model based on the $\textit{ab-initio}$ data is derived. The model can not only explain the unusual composition dependence of the transformation temperature in Ti-Ta-Al, but also provide a fast and elegant tool for a qualitative evaluation of other ternary systems. This is exemplified by predicting the trend of the transformation temperature of Ti-Ta-Sn and Ti-Ta-Zr alloys, yielding a remarkable agreement with available experimental data. △ Less

Submitted 12 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. Materials 2, 073609 (2018)

Infrared transmission spectroscopy of charge carriers in self-assembled InAs quantum dots under surface electric fields

Authors: Shovon Pal, Sascha R. Valentin, Nadezhda Kukharchyk, Hanond Nong, Alireza B. Parsa, Gunther Eggeler, Arne Ludwig, Nathan Jukam, Andreas D. Wieck

Abstract: We present a study on the intersublevel spacings of electrons and holes in a single layer of InAs self-assembled quantum dots (SAQDs) using Fourier transform infrared (FTIR) transmission spectroscopy without the application of an external magnetic field. Epitaxial, complementary-doped and semi-transparent electrostatic gates are grown within the ultra high vacuum conditions of molecular beam epita… ▽ More We present a study on the intersublevel spacings of electrons and holes in a single layer of InAs self-assembled quantum dots (SAQDs) using Fourier transform infrared (FTIR) transmission spectroscopy without the application of an external magnetic field. Epitaxial, complementary-doped and semi-transparent electrostatic gates are grown within the ultra high vacuum conditions of molecular beam epitaxy to voltage-tune the device, while a two dimensional electron gas (2DEG) serves as back contact. Spacings of the hole sublevels are indirectly calculated using the photoluminescence spectroscopy along with FTIR spectroscopy. The observed spacings fit well to the calculated values for both electrons and holes. Additionally, the intersubband resonances of the 2DEG are enhanced due to the QD layer on top of the device. △ Less

Submitted 18 September, 2014; originally announced September 2014.

Interaction effects and transport properties of Pt capped Co nanoparticles

Authors: A. Ludwig, L. Agudo, G. Eggeler, A. Ludwig, A. D. Wieck, O. Petracic

Abstract: We studied the magnetic and transport properties of Co nanoparticles (NPs) being capped with varying amounts of Pt. Beside field and temperature dependent magnetization measurements we performed delta-M measurements to study the magnetic interactions between the Co NPs. We observe a transition from demagnetizing towards magnetizing interactions between the particles for an increasing amount of Pt… ▽ More We studied the magnetic and transport properties of Co nanoparticles (NPs) being capped with varying amounts of Pt. Beside field and temperature dependent magnetization measurements we performed delta-M measurements to study the magnetic interactions between the Co NPs. We observe a transition from demagnetizing towards magnetizing interactions between the particles for an increasing amount of Pt capping. Resistivity measurements show a crossover from giant magnetoresistance towards anisotropic magnetoresistance. △ Less

Submitted 27 September, 2012; originally announced September 2012.

Journal ref: Journal of Applied Physics 113, 043917 (2013)

Tuning the magnetic properties of Co nanoparticles by Pt capping

Authors: A. Ebbing, O. Hellwig, L. Agudo, G. Eggeler, O. Petracic

Abstract: We show that by capping Co nanoparticles with small amounts of Pt strong changes of the magnetic properties can be induced. The Co nanoparticles have a mean diameter of 2.7 nm. From magnetometry measurements we find that for zero and for small amounts of Pt (nominal thickness t(Pt) < 0.7 nm) the nanoparticles behave superparamagnetic like. With increasing t(Pt) the blocking temperature is enhanced… ▽ More We show that by capping Co nanoparticles with small amounts of Pt strong changes of the magnetic properties can be induced. The Co nanoparticles have a mean diameter of 2.7 nm. From magnetometry measurements we find that for zero and for small amounts of Pt (nominal thickness t(Pt) < 0.7 nm) the nanoparticles behave superparamagnetic like. With increasing t(Pt) the blocking temperature is enhanced from 16 up to 108 K. Capping with Pd yields comparable results. However, for values t(Pt) > 1 nm a strongly coupled state is encountered resembling a ferromagnet with a T_c approx. 400 K △ Less

Submitted 1 April, 2011; originally announced April 2011.

Journal ref: Physical Review B 84, 012405 (2011)

Structural and magnetic characterization of self-assembled iron oxide nanoparticle arrays

Authors: M. J. Benitez, D. Mishra, P. Szary, G. A. Badini Confalonieri, M. Feyen, A. H. Lu, L. Agudo, G. Eggeler, O. Petracic, H. Zabel

Abstract: We report about a combined structural and magnetometric characterization of self-assembled magnetic nanoparticle arrays. Monodisperse iron oxide nanoparticles with a diameter of 20 nm were synthesized by thermal decomposition. The nanoparticle suspension was spin-coated on Si substrates to achieve self-organized arrays of particles and subsequently annealed at various conditions. The samples were… ▽ More We report about a combined structural and magnetometric characterization of self-assembled magnetic nanoparticle arrays. Monodisperse iron oxide nanoparticles with a diameter of 20 nm were synthesized by thermal decomposition. The nanoparticle suspension was spin-coated on Si substrates to achieve self-organized arrays of particles and subsequently annealed at various conditions. The samples were characterized by x-ray diffraction, bright and dark field high resolution transmission electron microscopy (HRTEM). The structural analysis is compared to the magnetic behavior investigated by superconducting interference device (SQUID) magnetometry. We can identify either multi-phase FeO/g-Fe2O3 or multi-phase FeO/Fe3O4 nanoparticles. The FeO/g-Fe2O3 system shows a pronounced exchange bias effect which explains the peculiar magnetization data obtained for this system. △ Less

Submitted 5 October, 2010; originally announced October 2010.

Journal ref: J. Phys.: Condens. Matter 23, 126003 (2011)