-
Formation and applications of nanoparticles in silica optical fibers
Authors:
Wilfried Blanc,
Bernard Dussardier
Abstract:
Optical fibers are the basis for applications that have grown considerably in recent years (telecommunications, sensors, fiber lasers, etc). Despite undeniable successes, it is necessary to develop new generations of amplifying optical fibers that will overcome some limitations typical of silica glass. In this sense, the amplifying Transparent Glass Ceramics (TGC), and particularly the fibers base…
▽ More
Optical fibers are the basis for applications that have grown considerably in recent years (telecommunications, sensors, fiber lasers, etc). Despite undeniable successes, it is necessary to develop new generations of amplifying optical fibers that will overcome some limitations typical of silica glass. In this sense, the amplifying Transparent Glass Ceramics (TGC), and particularly the fibers based on this technology, open new perspectives that combine the mechanical and chemical properties of a glass host with the augmented spectroscopic properties of embedded nanoparticles. This paper is an opportunity to make a state of the art on silica-based optical fibers containing nanoparticles of various types, particularly rare-earth-doped oxide nanoparticles, and on the methods for making such fibers. In the first section of this article, we will review basics on standard optical fibers and on nanoparticle-doped fibers. In the second section we will recall some fabrication methods used for standard optical fibers, and in the third section we will describe how TGC fibers can be obtained. This new generation of fibers, initiated a decade ago, already show very positive outlook and results departing from those obtained previously in homogeneous silica fibers. The next few years should see the emergence of new components based on these optical fibers.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Preparation and Properties of Er-Doped ZrO2 Nanocrystalline Phase-Separated Preforms of Optical Fibers by MCVD Process
Authors:
Anirban Dhar,
Ivan Kasik,
Ondrej Podrazky,
Vlastimil Matejec,
Bernard Dussardier
Abstract:
The fabrication of Er-doped ZrO2-based nanocrystalline phase-separated silica optical preforms by the MCVD and solution doping techniques is presented. Fabricated preform cores are nearly transparent and contain phase-separated rare-earth doped nanocrystalline particles with diameters mainly in a range from 20 to 80 nm. High concentrations of erbium and aluminium in preform cores of about 0.3 and…
▽ More
The fabrication of Er-doped ZrO2-based nanocrystalline phase-separated silica optical preforms by the MCVD and solution doping techniques is presented. Fabricated preform cores are nearly transparent and contain phase-separated rare-earth doped nanocrystalline particles with diameters mainly in a range from 20 to 80 nm. High concentrations of erbium and aluminium in preform cores of about 0.3 and 14 mol%, respectively have been achieved without defects on the core-cladding interface. Spectral losses in a range 800-1600 nm and fluorescence spectra of erbium ions around 1550 nm measured on a fibre drawn from the preform are reported.
△ Less
Submitted 30 November, 2011;
originally announced November 2011.
-
Design and fabrication of an intrinsically gain flattened Erbium doped fiber amplifier
Authors:
B. Nagaraju,
M. C. Paul,
M. Pal,
A. Pal,
Ravi K. Varshney,
B. P. Pal,
S. K. Bhadra,
Gérard Monnom,
Bernard Dussardier
Abstract:
We report design and subsequent fabrication of an intrinsically gain flattened Erbium doped fiber amplifier (EDFA) based on a highly asymmetrical and concentric dual-core fiber, inner core of which was only partially doped. Phase-resonant optical coupling between the two cores was so tailored through optimization of its refractive index profile parameters that the longer wavelengths within the C…
▽ More
We report design and subsequent fabrication of an intrinsically gain flattened Erbium doped fiber amplifier (EDFA) based on a highly asymmetrical and concentric dual-core fiber, inner core of which was only partially doped. Phase-resonant optical coupling between the two cores was so tailored through optimization of its refractive index profile parameters that the longer wavelengths within the C-band experience relatively higher amplification compared to the shorter wavelengths thereby reducing the difference in the well-known tilt in the gains between the shorter and longer wavelength regions. The fabricated EDFA exhibited a median gain ?28 dB (gain excursion below $\pm$2.2 dB within the C-band) when 16 simultaneous standard signal channels were launched by keeping the I/P level for each at ?20 dBm/ channel. Such EDFAs should be attractive for deployment in metro networks, where economics is a premium, because it would cut down the cost on gain flattening filter head.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
-
Long-period fiber grating as wavelength selective element in double-clad Yb-doped fiber-ring lasers
Authors:
P. Peterka,
Jerome Maria,
Bernard Dussardier,
R. Slavik,
P. Honzatko,
V. Kubecek
Abstract:
Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies the net gain profile of the laser, enabling the peak gain to occur at a designed wavelength. Spectral range of oscillation between 1050-1110 nm was experimen…
▽ More
Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies the net gain profile of the laser, enabling the peak gain to occur at a designed wavelength. Spectral range of oscillation between 1050-1110 nm was experimentally demonstrated. This range can be extended to both shorter and longer wavelengths with proper design of the LPFG and length of the Yb-doped fiber. The gratings were inscribed by CO2 laser and the grating period down to 175 ?m was achieved being, to our best knowledge, the shortest reported LPFG period using this technique.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
