-
Effects of high pressure on the physical properties of MgB2
Authors:
T. Prikhna,
W. Gawalek,
Ya. Savchuk,
A. Soldatov,
V. Sokolovsky,
M. Eisterer,
H. W. Weber,
J. Noudem,
M. Serga,
V. Turkevich,
M. Tompsic,
V. Tkach,
N. Danilenko,
W. Goldacker,
F. Karau,
I. Fesenko,
M. Rindfleisch,
J. Dellith,
M. Wendt,
S. You,
V. Meerovich,
S. Dub,
V. Moshchil,
N. Sergienko,
A. Kozyrev
, et al. (5 additional authors not shown)
Abstract:
The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/c…
▽ More
The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/cm2 in self field at 30 K, the corresponding critical fields being HC2 = 15 T at 22 K and irreversible fields Hirr =13 T at 20 K, and Hirr =3.5 T at 30 K, thermal conduction of 53+/-2 W/(m \cdot κ), the Vickers hardness Hv=10.12+/-0.2 GPa under a load of 148.8 N and the fracture toughness K1C = 7.6+/-2.0 MPa m0.5 under the same load, the Young modulus E=213 GPa. Estimation of quenching current and AC losses allowed the conclusion that highpressure-prepared materials are promising for application in transformer-type fault current limiters working at 20-30 K.
△ Less
Submitted 12 May, 2010;
originally announced May 2010.
-
Higher borides and oxygen-enriched Mg-B-O inclusions as possible pinning centers in nanostructural magnesium diboride and the influence of additives on their formation
Authors:
Tatiana Prikhna,
Wolfgang Gawalek,
Yaroslav Savchuk,
Vasiliy Tkach,
Nikolay Danilenko,
Michael Wendt,
Jan Dellith,
Harold Weber,
Michael Eisterer,
Viktor Moshchil,
Nina Sergienko,
Artem Kozyrev,
Peter Nagorny,
Andrey Shapovalov,
Vladimir Melnikov,
Sergey Dub,
Doris Litzkendorf,
Tobias Habisreuther,
Christa Schmidt,
Athanasios Mamalis,
Vladimir Sokolovsky,
Vladimir Sverdun,
Fridrich Karau,
Alexandra Starostina
Abstract:
The study of high pressure (2 GPa) synthesized MgB2-based materials allows us to conclude that higher borides (with near MgB12 stoichiometry) and oxygen-enriched Mg-B-O inclusions can be pinning centers in nanostructural magnesium diboride matrix (with average grain sizes of 15-37 nm). It has been established that additions of Ti or SiC as well as manufacturing temperature can affect the size, a…
▽ More
The study of high pressure (2 GPa) synthesized MgB2-based materials allows us to conclude that higher borides (with near MgB12 stoichiometry) and oxygen-enriched Mg-B-O inclusions can be pinning centers in nanostructural magnesium diboride matrix (with average grain sizes of 15-37 nm). It has been established that additions of Ti or SiC as well as manufacturing temperature can affect the size, amount and distribution of these inclusions in the material structure and thus, influence critical current density. The superconducting behavior of materials with near MgB12 stoichiometry of matrix is discussed.
△ Less
Submitted 12 January, 2010;
originally announced January 2010.
-
Inhomogeneity of Magnesium Diboride Structure and its Effect on Critical Current Density
Authors:
T. Prikhna,
W. Gawalek,
Ya. Savchuk,
A. Kozyrev,
M. Wendt,
J. Dellith,
W. Goldacker,
S. Dub,
N. Sergienko,
T. Habisreuther,
V. Moshchil,
U. Dittrich,
W. Karau,
J. Noudem,
Ch. Schmidt,
V. Turkevich,
D. Litzkendorf,
H. Weber,
M. Eisterer,
V. Melnikov,
P. Nagorny,
V. Sverdun
Abstract:
The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoret…
▽ More
The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoretical density (2.7 g/cm3) based on MgB2-SiC (10 wt. percents of 200-800 nm SiC was added), which is characterized by high jc (1000000 A/cm2 in 1 T - 100000 A/cm2 in 3.5 T at 20 K and 100000 A/cm2 at 35 K) has been synthesized at 2 GPa.
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Nanostructural Superconducting Materials for Fault Current Limiters and Cryogenic Electrical Machines
Authors:
T. A. Prikhna,
W. Gawalek,
Ya. M. Savchuk,
N. V. Sergienko,
V. E. Moshchil,
V. Sokolovsky,
J. Vajda,
V. N. Tkach,
F. Karau,
H. Weber,
M. Eisterer,
A. Juolain,
J. Rabier,
X. Chaud,
M. Wendt,
J. Dellith,
N. I. Danilenko,
T. Habisreuther,
S. N. Dub,
V. Meerovich,
D. Litzkendorf,
P. A. Nagorny,
L. K. Kovalev,
Ch. Schmidt,
V. S. Melnikov
, et al. (5 additional authors not shown)
Abstract:
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical mac…
▽ More
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical machines (electromotors, generators, pumps for liquid gases, etc.). The developed processes of high-temperature (900-800 oC) oxygenation under elevated pressure (16 MPa) of MT-YBCO and high-pressure (2 GPa) synthesis of MgB2-based materials allowed us to attain high SC (critical current densities, upper critical fields, fields of irreversibility, trapped magnetic fields) and mechanical (hardness, fracture toughness, Young modulus) characteristics. It has been shown that the effect of materials properties improvement in the case of MT-YBCO was attained due to the formation of high twin density (20-22 micron-1), prevention of macrockracking and reduction (by a factor of 4.5) of microcrack density, and in the case of MgB2-based materials due to the formation of oxygen-enriched as compared to the matrix phase fine-dispersed Mg-B-O inhomogenities as well as inclusions of higher borides with near-MgB12 stoichiometry in the Mg-B-O matrix (with 15-37 nm average grain sizes). The possibility is shown to obtain the rather high Tc (37 K) and critical current densities in materials with MgB12 matrix (with 95 percent of shielding fraction as calculated from the resistant curve).
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Effect of higher borides and inhomogeneity of oxygen distribution on critical current density of undoped and doped magnesium diboride
Authors:
T. A. Prikhna,
W. Gawalek,
V. M. Tkach,
N. I. Danilenko,
Ya M. Savchuk,
S. N. Dub,
V. E. Moshchil,
A. V. Kozyrev,
N. V. Sergienko,
M. Wendt,
V. S. Melnikov,
J. Dellith,
H Weber,
M Eisterer,
Ch Schmidt,
T Habisreuther,
D Litzkendorf,
J Vajda,
A. P. Shapovalov,
V. Sokolovsky,
P. A. Nagorny,
V. B. Sverdun,
J. Kosa,
F. Karau,
A. V. Starostina
Abstract:
The effect of doping with Ti, Ta, SiC in complex with synthesis temperature on the amount and distribution of structural inhomogeneities in MgB2 matrix of high-pressuresynthesized-materials (2 GPa) which can influence pining: higher borides (MgB12) and oxygen-enriched Mg-B-O inclusions, was established and a mechanism of doping effect on jc increase different from the generally accepted was prop…
▽ More
The effect of doping with Ti, Ta, SiC in complex with synthesis temperature on the amount and distribution of structural inhomogeneities in MgB2 matrix of high-pressuresynthesized-materials (2 GPa) which can influence pining: higher borides (MgB12) and oxygen-enriched Mg-B-O inclusions, was established and a mechanism of doping effect on jc increase different from the generally accepted was proposed. Near theoretically dense SiC-doped material exhibited jc= 1000000 A/sq. cm in 1T field and Hirr =8.5 T at 20 K. The highest jc in fields above 9, 6, and 4 T at 10, 20, and 25 K, respectively, was demonstrated by materials synthesized at 2 GPa, 600 oC from Mg and B without additions (at 20 K jc= 100 A/sq. cm in 10 T field). Materials synthesized from Mg and B taken up to 1:20 ratio were superconductive. The highest jc (60000 A/sq. cm at 20 K in zero field, Hirr= 5 T) and the amount of SC phase (95.3 percents of shielding fraction), Tc being 37 K were demonstrated by materials having near MgB12 composition of the matrix. The materials with MgB12 matrix had a doubled microhardness of that with MgB2 matrix (25 GPa and 13.08 GPa, at a load of 4.9 N, respectively).
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
High-pressure synthesis of MgB2 with addition of Ti
Authors:
T. A. Prikhna,
W. Gawalek,
Ya. M. Savchuk,
V. E. Moshchil,
N. V. Sergienko,
R. Hergt,
M. Wendt,
S. N. Dub,
Ch. Schmidt,
J. Dellith,
V. S. Melnikov,
T. Habisreuther,
D. Litzkendorf,
P. A. Nagorny
Abstract:
The MgB2 - based material high-pressure synthesized at 2 GPa and 800 C for 1 h from Mg and B (taken in the stoichiometry ratio of MgB2) with addition of 2-10 wt% of Ti demonstrated the critical current density (jc) higher than 100 kA/cm^2 at 33 K in 0 T field and at 20 K up to 3 T. At 20 K the critical current density higher than 10 kA/cm^2 was observed up to 5 T field. In the magnetic field up…
▽ More
The MgB2 - based material high-pressure synthesized at 2 GPa and 800 C for 1 h from Mg and B (taken in the stoichiometry ratio of MgB2) with addition of 2-10 wt% of Ti demonstrated the critical current density (jc) higher than 100 kA/cm^2 at 33 K in 0 T field and at 20 K up to 3 T. At 20 K the critical current density higher than 10 kA/cm^2 was observed up to 5 T field. In the magnetic field up to 2 T high-pressure synthesized MgB2 (with 10 % of Ti) at 20 K behaves in the same manner as Nb3Sn at 4.2 K. In XRD patterns of magnesium diboride with the Ti added, we observed no evidence of titanium diboride or unreacted titanium and only one compound with titanium was identified, namely, titanium dihydride TiH2 (or more strictly TiH1.924). The sample with the highest critical current density and irreversible field in the temperature range of 25-10 K contained some amount of pure Mg that was rather homogeneously dispersed in the material. The critical currents and irreversible fields of magnesium diboride synthesized at high pressure with Ti added are higher than those in the case where Ta has been added.
△ Less
Submitted 1 June, 2003;
originally announced June 2003.
-
Soldering of MT-YBCO: method to produce superconductive junctions
Authors:
T. Prikhna,
W. Gawalek,
N. Novikov,
V. Moshchil,
V. Sverdun,
N. Sergienko,
A. Surzhenko,
M. Wendt,
T. Habisreuther,
D. Litzkendorf,
S. Dub,
R. Mueller,
A. Kordyuk,
S. Kracunovska,
L. Alexandrova
Abstract:
A method of soldering of melt-textured YBa2Cu3O7-d -based (MT-YBCO) superconductive blocks using a TmBaCu3O7-d (Tm123) powder has been suggested. The method excludes stages of slow cooling during soldering and preparation of auxiliary layers. To estimate the critical current density (jc) through the obtained junction, we have drilled rings from single-domained MT-YBCO blocks, cut into two pieces…
▽ More
A method of soldering of melt-textured YBa2Cu3O7-d -based (MT-YBCO) superconductive blocks using a TmBaCu3O7-d (Tm123) powder has been suggested. The method excludes stages of slow cooling during soldering and preparation of auxiliary layers. To estimate the critical current density (jc) through the obtained junction, we have drilled rings from single-domained MT-YBCO blocks, cut into two pieces along the diameters and soldered using a Tm123 powder. The critical current density, jc, (estimated using vibrating sample magnetometer) through the soldered ring was 34 kA/cm^2 in 0 T field at 77 K, which turned out to be even higher by a factor of approximately 1.5 than that through the single-domained material. The increase in jc through the soldered ring has been observed up to the 2.5 T field, while in the higher fields some decrease of jc took place. As a result of the field mapping of the trapped magnetic flux in soldered ring using a Hall probe, we obtained a regular truncated cone and the maximal level of trapped field for the ring 8 and 4 mm in outer and inner diameters was about 80 mT.
△ Less
Submitted 17 April, 2002;
originally announced April 2002.
-
Positive influence of ta addition on superconductive properties of high pressure synthesized MgB_2
Authors:
T. Prikhna,
W. Gawalek,
N. Novikov,
Ya. Savchuk,
V. Moshchil,
N. Sergienko,
M. Wendt,
S. Dub,
V. Melnikov,
A. Surzhenko,
D. Litzkendorf,
P. Nagorny,
C. Schmidt
Abstract:
Bulk MgB2 - based materials with the following critical current densities (jc) in 1 T field: 570 kA/cm^2 at 10 K, 350 kA/cm^2 at 20 K and 40 kA/cm^2 at 30 K and in 10 T field: 650 A/cm^2 at 10 K have been high-pressure (HP) synthesized from Mg and B with 2 - 10 wt.% addition of Ta. In synthesis and sintering process Ta plays the role of an absorbent of impurity gases (hydrogen, nitrogen, etc.) a…
▽ More
Bulk MgB2 - based materials with the following critical current densities (jc) in 1 T field: 570 kA/cm^2 at 10 K, 350 kA/cm^2 at 20 K and 40 kA/cm^2 at 30 K and in 10 T field: 650 A/cm^2 at 10 K have been high-pressure (HP) synthesized from Mg and B with 2 - 10 wt.% addition of Ta. In synthesis and sintering process Ta plays the role of an absorbent of impurity gases (hydrogen, nitrogen, etc.) and forms Ta2H, TaH, TaN0.1, etc., thus promotes the reduction of MgH2 in Mg-B-O-matrix phase, as well as, the impurity nitrogen and oxygen in Mg-B grains (black MgB2 single crystals distributed over the matrix). Vickers microhardness of HP-synthesized material is Hv=12.54 (+/-)0.86 GPa (at 0.496-N load) The hardness (at 60-mN load) of MgB2 single crystals located in a sample matrix is 35.6 (+/-)0.9 GPa that is higher than the hardness of sapphire (31.1 (+/-)2.0 GPa).
△ Less
Submitted 17 April, 2002;
originally announced April 2002.
-
Synthesis and Sintering of MgB2 Under High Pressure
Authors:
T. A. Prikhna,
Ya. M. Savchuk,
N. V. Sergienko,
V. E. Moshchil,
S. N. Dub,
P. A. Nagorny,
W. Gawalek,
T. Habisreuther,
M. Wendt,
A. B. Surzhenko,
D. Litzkendorf,
Ch. Schmidt,
J. Dellith,
V. S. Melnikov
Abstract:
High-pressure (HP) synthesis and sintering are promising methods for manufacturing of the bulk MgB2 superconductive material. The available high-pressure apparatuses with 100 cm3 working volume can allow us to use the bulk MgB2 for practical applications such as electromotors, fly-wheels, bearings, etc. We have found that the Ta presence during HP synthesis (especially) or sintering process (in…
▽ More
High-pressure (HP) synthesis and sintering are promising methods for manufacturing of the bulk MgB2 superconductive material. The available high-pressure apparatuses with 100 cm3 working volume can allow us to use the bulk MgB2 for practical applications such as electromotors, fly-wheels, bearings, etc. We have found that the Ta presence during HP synthesis (especially) or sintering process (in the form of a foil that covered the sample and as an addition of Ta powder of about 2-10 wt.% to the starting mixture of B and Mg or to MgB2 powder) increases the critical current density (jc) in the magnetic fields up to 10 T and the fields of irreversibility (Hirr) of MgB2-based bulk materials. We observed the strong evidences that Ta absorbs hydrogen and nitrogen during synthesis and sintering to form Ta2H, TaH and TaN0.1 and prevents or reduces the formation of MgH2 (both with orthorhombic and tetragonal structures). Ta also essentially reduces the amount of impurity nitrogen in black Mg-B (most likely, MgB2) crystals of the matrix phase. The presence of Ta during synthesis allowed us to obtain a bulk materials with the following critical current densities jc in 1 T field: 570 kA/cm2 at 10 K, 350 kA/cm2 at 20 K and 40 kA/cm2 at 30 K. Besides, the materials demonstrated high mechanical characteristics (microhardness, fracture toughness, Young modulus).
△ Less
Submitted 3 April, 2002;
originally announced April 2002.
-
The high-pressure synthesis of MgB2
Authors:
T. A. Prikhna,
W. Gawalek,
A. B. Surzhenko,
N. V. Sergienko,
V. E. Moshchil,
T. Habisreuther,
V. S. Melnikov,
S. N. Dub,
P. A. Nagorny,
M. Wendt,
Ya. M. Savchuk,
D. Litzkendorf,
J. Dellith,
S. Kracunovska,
Ch. Schmidt
Abstract:
The high-pressure synthesis is one of the most promising methods to produce MgB2 superconductive (SC) material. The available high-pressure apparatuses have working volume up to 100 cm3 which allows samples up to 60 mm in diameter to be manufactured. By a short-term (1h) high-pressure (2GPa) synthesis from Mg and B we have obtained samples 2.4-2.5 g/cm3 in density, 12.1-15.6 GPa in microhardness…
▽ More
The high-pressure synthesis is one of the most promising methods to produce MgB2 superconductive (SC) material. The available high-pressure apparatuses have working volume up to 100 cm3 which allows samples up to 60 mm in diameter to be manufactured. By a short-term (1h) high-pressure (2GPa) synthesis from Mg and B we have obtained samples 2.4-2.5 g/cm3 in density, 12.1-15.6 GPa in microhardness (under 4.96 N load), 170-200 kA/cm2 at 10 K and 58-62 kA/cm2 at 20 K in critical current density at a magnetic field of 1T. Samples demonstrated 8.5 T irreversible field at 10 K and 5.5 T at 20 K. The Ta positive influence on SC properties of MgB2 has been observed.
△ Less
Submitted 12 September, 2001;
originally announced September 2001.
-
Superconducting joining of melt-textured Y-Ba-Cu-O bulk material
Authors:
T. Prikhna,
W. Gawalek,
V. Moshchil,
A. Surzhenko,
A. Kordyuk,
D. Litzkendorf,
S. Dub,
V. Melnikov,
A. Plyushchay,
N. Sergienko,
A. Koval',
S. Bokoch,
T. Habisreuther
Abstract:
The Tm-Ba-Cu-O solder can be successfully used to produce a superconductive joint between MT-YBCO parts. The peculiarities of solidification, phase formation, structure transformations and electromagnetic properties of MT-YBCO soldered with TmBa2Cu3O7-d are discussed.
The Tm-Ba-Cu-O solder can be successfully used to produce a superconductive joint between MT-YBCO parts. The peculiarities of solidification, phase formation, structure transformations and electromagnetic properties of MT-YBCO soldered with TmBa2Cu3O7-d are discussed.
△ Less
Submitted 28 July, 2000;
originally announced July 2000.
-
Thermobaric Effect on Melt-Textured MBa$_2$Cu$_3$O$_{7-δ}$ (M = Y, Nd)
Authors:
T. Prikhna,
W. Gawalek,
V. Moshchil,
R. Viznichenko,
F. Sandiumenge,
V. Melnikov,
P. Shaetzle,
P. Nagorny,
A. Surzhenko,
S. Dub,
Ch. Wende
Abstract:
The effect of a short (10-30 min) thermobaric action (in the 1-5 GPa pressure and 700-1300$^\circ$C temperature range) on the structure, superconductive and mechanical properties of melt-textured-MBa$_2$Cu$_3$O$_{7-δ}$ (M=Y, Nd) or MT-MBCO have been studied. The existence has been established of pressure-temperature--time conditions (2 GPa, 800$^\circ$C for 30 min and 900-950$^\circ$C for 15 min…
▽ More
The effect of a short (10-30 min) thermobaric action (in the 1-5 GPa pressure and 700-1300$^\circ$C temperature range) on the structure, superconductive and mechanical properties of melt-textured-MBa$_2$Cu$_3$O$_{7-δ}$ (M=Y, Nd) or MT-MBCO have been studied. The existence has been established of pressure-temperature--time conditions (2 GPa, 800$^\circ$C for 30 min and 900-950$^\circ$C for 15 min for MT-YBCO; 5 GPa, 850-900$^\circ$C for 15 min for MT-NdBCO) the treatment under which allows superconductive properties of the materials (because of the contact with zirconia and high pressure) to be preserved or improved, mechanical characteristics increased and the materials condensed.
△ Less
Submitted 4 July, 1999;
originally announced July 1999.
