Showing 1–8 of 8 results for author: Drevillon, J

Energy density above a resonant metamaterial in the GHz: an alternative to near-field thermal emission detection

Authors: Karl Joulain, Jérémie Drevillon, Younès Ezzahri

Abstract: This paper proposes an experiment to easily detect radiative heat transfer in the microwave range. Following an idea given by Pendry more than a decade ago [1], we show that a 3D array of tungsten 2micron radius wires with a 1 cm period makes a low cost material exhibiting a surface plasmon in the microwave range around 2.9 GHz. Such a heated material should exhibit an emission peak near the plasm… ▽ More This paper proposes an experiment to easily detect radiative heat transfer in the microwave range. Following an idea given by Pendry more than a decade ago [1], we show that a 3D array of tungsten 2micron radius wires with a 1 cm period makes a low cost material exhibiting a surface plasmon in the microwave range around 2.9 GHz. Such a heated material should exhibit an emission peak near the plasmon frequency well above ambient emission. Analysis of the signal detected in the near-field should also be a tool to analyze how homogenization theory applies when the distance to the material is of the order of the metamaterial period. It could also be give a model to non-local dielectric properties in the same conditions. △ Less

Submitted 22 July, 2015; originally announced July 2015.

Comments: in 7th International Symposium on Radiative Transfer, Jun 2013, Kusadaci, Turkey. 2013

Radiative Thermal Rectification between SiC and SiO2

Authors: Karl Joulain, Younes Ezzahri, Jérémie Drevillon, Benoit Rousseau, Domingos De Sousa Meneses

Abstract: By means of fluctuationnal electrodynamics, we calculate radiative heat flux between two pla-nar materials respectively made of SiC and SiO2. More specifically, we focus on a first (direct) situation where one of the two materials (for example SiC) is at ambient temperature whereas the second material is at a higher one, then we study a second (reverse) situation where the material temperatures ar… ▽ More By means of fluctuationnal electrodynamics, we calculate radiative heat flux between two pla-nar materials respectively made of SiC and SiO2. More specifically, we focus on a first (direct) situation where one of the two materials (for example SiC) is at ambient temperature whereas the second material is at a higher one, then we study a second (reverse) situation where the material temperatures are inverted. When the two fluxes corresponding to the two situations are different, the materials are said to exhibit a thermal rectification, a property with potential applications in thermal regulation. Rectification variations with temperature and separation distance are here reported. Calculations are performed using material optical data experimentally determined by Fourier transform emission spectrometry of heated materials between ambient temperature (around 300 K) and 1480 K. It is shown that rectification is much more important in the near-field domain, i.e. at separation distances smaller than the thermal wavelength. In addition, we see that the larger is the temperature difference, the larger is rectification. Large rectification is finally interpreted due to a weakening of the SiC surface polariton when temperature increases, a weakening which affects much less SiO2 resonances. △ Less

Submitted 29 September, 2015; v1 submitted 23 June, 2015; originally announced June 2015.

Journal ref: Optics Express, Optical Society of America, 2015, 23 (24), pp.A1388-A1397

Modulation and amplification of radiative far field heat transfer: Towards a simple radiative thermal transistor

Authors: Karl Joulain, Younès Ezzahri, Jérémie Drevillon, Philippe Ben-Abdallah

Abstract: We show in this article that phase change materials (PCM) exhibiting a phase transition between a dielectric state and a metallic state are good candidates to perform modulation as well as amplification of radiative thermal flux. We propose a simple situation in plane parallel geometry where a so-called radiative thermal transistor could be achieved. In this configuration, we put a PCM between two… ▽ More We show in this article that phase change materials (PCM) exhibiting a phase transition between a dielectric state and a metallic state are good candidates to perform modulation as well as amplification of radiative thermal flux. We propose a simple situation in plane parallel geometry where a so-called radiative thermal transistor could be achieved. In this configuration, we put a PCM between two blackbodies at different temperatures. We show that the transistor effect can be achieved easily when this material has its critical temperature between the two blackbody temperatures. We also see, that the more the material is reflective in the metallic state, the more switching effect is realized whereas the more PCM transition is stiff in temperature, the more thermal amplification is high. We finally take the example of VO2 that exhibits an insulator-metallic transition at 68{\textdegree}C. We show that a demonstrator of a radiative transistor could easily be achieved in view of the heat flux levels predicted. Far-field thermal radiation experiments are proposed to back the results presented. △ Less

Submitted 23 June, 2015; v1 submitted 24 February, 2015; originally announced February 2015.

Journal ref: Applied Physics Letters, American Institute of Physics (AIP), 2015, 106 (13), Applied Physics Letters, 106, 133505 (2015)

Radiative thermal rectification using superconducting materials

Authors: Elyes Nefzaoui, Karl Joulain, Jérémie Drevillon, Younès Ezzahri

Abstract: Thermal rectification phenomenon is a manifestation of an asymmetry in the heat flux when the temperature difference between two interacting thermal reservoirs is reversed. In this letter, we present a far-field radiative thermal rectifier based on high temperature superconducting materials with a rectification ratio up to $80%$. This value is among the highest reported in literature. Two configur… ▽ More Thermal rectification phenomenon is a manifestation of an asymmetry in the heat flux when the temperature difference between two interacting thermal reservoirs is reversed. In this letter, we present a far-field radiative thermal rectifier based on high temperature superconducting materials with a rectification ratio up to $80%$. This value is among the highest reported in literature. Two configurations are examined : a superconductor (Tl$_2$Ba$_2$CaCu$_2$O$_8$) exchanging heat with 1) a black body and 2) another superconductor, YBa$_2$Cu$_3$O$_7$ in this case. The first configuration shows a higher maximal rectification ratio. Besides, we show that the two superconductors rectifier exhibits different rectification regimes depending on the choice of the reference temperature, i.e the temperature of the thermostat. Presented results might be useful for energy conversion devices, efficient cryogenic radiative insulators engineering and thermal logical circuits development. △ Less

Submitted 13 December, 2013; originally announced December 2013.

Comments: 5 pages, 4 figures, submitted to Applied Physics Letters

Journal ref: Appl. Phys. Lett. 104 , 103905 (2014)

A simple radiative thermal diode

Authors: Elyes Nefzaoui, Jérémie Drevillon, Younès Ezzahri, Karl Joulain

Abstract: We present a thermal rectification device concept based on far-field radiative exchange between two selective emitters. Rectification is achieved due to the fact that one of the selective emitters radiative properties are independent on temperature whereas the other emitter properties are strongly temperature dependent. A simple device constituted by two multilayer samples made of metallic (Au) an… ▽ More We present a thermal rectification device concept based on far-field radiative exchange between two selective emitters. Rectification is achieved due to the fact that one of the selective emitters radiative properties are independent on temperature whereas the other emitter properties are strongly temperature dependent. A simple device constituted by two multilayer samples made of metallic (Au) and semiconductor (Si and HDSi) thin films is proposed. This device shows a rectification up to 70% with a temperature difference ΔT = 200 K, a rectification ratio that has never been achieved so far with radiation-based rectifiers. Further optimization would allow larger rectification values. Presented results might be useful for energy conversion devices, smart radiative coolers / insulators engineering and thermal modulators development. △ Less

Submitted 26 June, 2013; originally announced June 2013.

Comments: 14 pages, 4 figures

Journal ref: Applied Optics, Vol. 53, Issue 16, pp. 3479-3485 (2014)

Maximal near-field radiative heat transfer between two plates

Authors: Elyes Nefzaoui, Younès Ezzahri, Jérémie Drevillon, Karl Joulain

Abstract: A parametric study of Drude and Lorentz models performances in maximizing near-field radiative heat transfer between two semi-infinite planes separated by nanometric distances at room temperature is presented in this paper. Optimal parameters of these models that provide optical properties maximizing the radiative heat flux are reported and compared to real materials usually considered in similar… ▽ More A parametric study of Drude and Lorentz models performances in maximizing near-field radiative heat transfer between two semi-infinite planes separated by nanometric distances at room temperature is presented in this paper. Optimal parameters of these models that provide optical properties maximizing the radiative heat flux are reported and compared to real materials usually considered in similar studies, silicon carbide and heavily doped silicon in this case. Results are obtained by exact and approximate (in the extreme near-field regime and the electrostatic limit hypothesis) calculations. The two methods are compared in terms of accuracy and CPU resources consumption. Their differences are explained according to a mesoscopic description of near-field radiative heat transfer. Finally, the frequently assumed hypothesis which states a maximal radiative heat transfer when the two semi-infinite planes are of identical materials is numerically confirmed. Its subsequent practical constraints are then discussed. △ Less

Submitted 22 February, 2013; v1 submitted 7 February, 2013; originally announced February 2013.

Comments: 19 pages, 11 figures, submitted to Journal of Physics D : Applied Physics

Selective emitters design and optimization for thermophotovoltaic applications

Authors: Elyes Nefzaoui, Jérémie Drevillon, Karl Joulain

Abstract: Among several solutions to exploit solar energy, thermophotovoltaics (TPV) have been popularized and have known great breakthroughs during the past two decades. Yet, existing systems still have low efficiencies since the wavelength range of optimal photovoltaic (PV) conversion is very small compared to the emitter spectral range. Selective emitters are a very promising solution to this problem. We… ▽ More Among several solutions to exploit solar energy, thermophotovoltaics (TPV) have been popularized and have known great breakthroughs during the past two decades. Yet, existing systems still have low efficiencies since the wavelength range of optimal photovoltaic (PV) conversion is very small compared to the emitter spectral range. Selective emitters are a very promising solution to this problem. We developed numerical tools to design and optimize such emitters. Some of the resulting structures composed of two or four layers of metals and semiconductors are presented in this paper. We also show that the usual PV devices efficiency limits (30% for crystalline silicon under solar radiation, according to Shockley-Queisser model) can be easily overcome thanks to these structures. △ Less

Submitted 15 February, 2012; originally announced February 2012.

Comments: 12 pages, 10 figures

Heat Transport Through Plasmonic Interactions in Closely Spaced Metallic Nanoparticles Chains

Authors: Philippe Ben-Abdallah, Karl Joulain, Jérémie Drevillon, Clément Le Goff

Abstract: We report a numerical investigation on the heat transfer through one dimensional arrays of metallic nanoparticles closely spaced in a host material. Our simulations show that the multipolar interactions play a crucial role in the heat transport via collective plasmons. Calculations of the plasmonic thermal conductance and of the thermal conductivity in ballistic and diffusive regime, respectivel… ▽ More We report a numerical investigation on the heat transfer through one dimensional arrays of metallic nanoparticles closely spaced in a host material. Our simulations show that the multipolar interactions play a crucial role in the heat transport via collective plasmons. Calculations of the plasmonic thermal conductance and of the thermal conductivity in ballistic and diffusive regime, respectively have been carried out. (a) Using the Landauer-Buttiker formalism we have found that, when the host material dielectric constant takes positive values, the multipolar interactions drastically enhance by several order of magnitude the ballistic thermal conductance of collective plasmons compared with that of a classical dipolar chain. On the contrary, when the host material dielectric constant takes negative values, we have demonstrated the existence of non-ballistic multipolar modes which annihilate the heat transfer through the chains. (b) Using the kinetic theory we have also examined the thermal behavior of chains in the diffusion approximation. We have shown that the plasmonic thermal conductivity of metallic nanoparticle chains can reach 1% of the bulk metal thermal conductivity . This result could explain the anomalously high thermal conductivity observed in many colloïdal suspensions, the so called nanofluids. △ Less

Submitted 24 January, 2008; originally announced January 2008.

Comments: 10 pages, PRB